Instructions for the correct installation of SIM cards to any phone. SIM card in Samsung Galaxy S8 - manual for use how to open a sim card on samsung

When developing Samsung Galaxy S6 Korean manufacturer decided to abandon plastic for metal and skin in favor of the aluminum frame and glass rear panel. As a result, the smartphone turned out to be quite attractive and began to really look like a flagship device, and not as a cheap Chinese something. Since the phone body turned out to be monolithic, the engineers had to transfer some elements, access to which in previous flagships could be obtained simply by removing the lid. So, the connector for the SIM card moved to side panel Under the power button and got a tray. Unfortunately, there are not everyone who wants to acquire Samsung Galaxy S6 about this crossing. Therefore, we devoted this small article: how to insert Sims in Samsung Galaxy S6.

How to insert a SIM card into the device

The SIM holder can be found on the right end of the mobile device over a small hole. To insert SIM into it, you need to do the following:

  1. Find an ejector, referred to in common as a clip. It is usually included as a standard package of a smartphone.
  2. Insert it into the hole and slightly press them inside.

    Inserting the ejector into the hole of the SIM holder: try to do it as much as possible

  3. Carefully pinched and remove the holder.
  4. Place it simka Nanosim format. It is advisable to use a card issued by the operator, and not cut independently so that there are no conflicts between it and the smartphone during the work.

    Proper placement of Nanosim in the holder

  5. Place the holder in the compartment so that the hole in the "ear" tray is near the power button.

How to get a sim card from the device

  1. Insert the ejector into the hole in the tray and put pressure on them inside.
  2. Gently remove the tray with the SIM card and get it.

In this article, we will tell how to properly insert the SIM card on the phone. Come out new modern models with comfortable slots in which cards desired size Inserted without problems.

Yes, and all popular mobile operators produce peculiar designers - sims of three sought-after dimensions: nano, micro and standard.

SIM cards is an identification module of the telecom operator subscriber. From the moment of their launch and before the start of mass sales, several dozen years have passed, and during this time their shape and dimensions were improved. This process was forced. At first, smartphones appeared in the mobile markets, and the places under the back cover were simply not enough. Technologies have been improved, users' requests increased, more and more, phones thinner, and less places.

Such evolution of cards allowed them to decrease almost twice as well, and modern nominating slots were noticeably released space for the remaining parts.

Let's look at what kinds of SIM are, what is their feature, and how to insert SIM:

  • Full-size (on the presence of which they did not even have even guess) - the largest in the line, around the perimeter as bank card. Appeared in 1991 with the first wave of popularity cellular communication Among ordinary residents. It is not used in modern phones, sometimes you can meet cars with similar "innovations" a la 90s.
  • MINI-SIM - is still used for devices released from the period of 2000 to the beginning of 2010, supports 2G and 3G.
  • Micro-SIM appeared in 2003, but on this moment It is considered the most used generation of communication modules. Supported by all manufacturers modern gadgets with 3G and LTE.
  • The smallest is Nano-SIM, which looks like its predecessor, only without plastic edges. It appeared five years ago, and is used in all models of the Apple brand and some other premium segment manufacturers.

All kinds of simes are inserted the same - in the allotted slots in the smartphone or tablet. To say exactly where the stand is, it is impossible, since manufacturers reserve the right to place them anywhere, according to their design concept. Sometimes new phones glitched with step by step instructionsIt can also be found in the user manual.

Installing a SIM card

Traditionally, manufacturers place card holders on the right end of the housing (if the cover is not removable), or directly under the battery, if it gets. The following instructions are suitable for the owners of the latter gadgets:

  1. Check if your phone is turned off.
  2. Disconnect the rear panel.
  3. Find a small deepening between the case and the battery.
  4. Remove the battery.
  5. There you will see slots for SIM cards. They are of different types: separate and two-story. The side you want to keep at the top insert will be depicted near the holder. As a rule, it is inserted with gold contacts down.
  6. Gently insert the battery back. Check that it sat tightly.
  7. Return the lid to characteristic clicks. They will mean that the lid has become in his place.

In the video you can see how you need to do with modern models, which do not remove the lid:

And here's another video with a healthy lifechak:

Settings

Modern smartphones and sims do not need manual connections. When you first start on a new device from mobile operator Comes Package free settings For all types of cellular services.

In two-minute mobile devicesManaging can deliver a new difficulty. You can select SIM for default actions, or choose yourself with each call and message.

Is the usual SIM card in a slot for Micro-SIM

You can trim the map of ordinary sizes to Micro-SIM dimensions, if the card is old. However, it is much easier and safer to contact service centerwhere you will be given a new sim in the form of a transformer - all popular sizes.

If the module urgently needs to be replaced with a smaller, you can cut it by hand with conventional sharp scissors.

What to do with the unsuccessful cropped sim card

However, such experiments are not always completed successfully. If the SIM card was incorrectly cut and damaged, it is necessary to contact your mobile operator customer service points. Replacing the card to another SIM with the maintenance of the balance, tariff plan And, directly, the rooms take it short.

Insert sim that has mechanical damage, Not recommended.

SIM card malfunctions

On their faults, users guess when the OS does not see the module, and does not refer it to the corresponding icon. Causes may be:

  • SIM has expired, and it is not intended for further operation.
  • It has mechanical damage - scratches, chips and dorms.
  • Unsuccessful trimming. She was mentioned above.
  • The firmware of the phone is sharpened under a specific buyer.
  • Problems with a slot.
  • Failures B. operating system and software
  • When installing, contacts were damaged.
  • Dirt hit the card holder.

In most cases, the card must be replaced, or send a phone to the diagnosis of the master, as it can be hardware problems, and systemic.

Conclusion

Mobile communications and the Internet, throughout the day, are available for smartphones and small card modules manufactured by cellular communication providers. That is why they need to be carefully treated, follow their condition and health. The more gadgets goes, the easier the use of SIM - their dimensions decrease, and the possibilities are growing. We hope this article was useful for you, and you received accessible instructions on how to handle them in different situations.

Video

Samsung decided to listen to his fans and returned to new flagship galaxy devices S7 and Galaxy S7 EDGE memory card support. However, it did it with a hybrid slot, as it became fashionable in lately. This means that the user must select, use in a 2 SIM card smartphone or one SIM card and a microSD card. Fortunately found craftsmen, found that contacts the second SIM and contact card contacts are located in different places and managed to combine pleasant with useful to organize the simultaneous operation of two SIM and microSD cards. And if you decide to become the owner of a new device (or have already become), despite all its minor disadvantages, then this article is for you. We publish translation instructions with detailed comments on the installation of two SIM cards and memory cards in Galaxy S7 and Galaxy S7 EDGE.


Denial of responsibility: All of the manipulation listed below you do only at your own risk. Neither the author and no one is responsible for your actions and for possible caused damage. The probability of damaging the SIM card microchip, to a lesser extent, is a map microSd memory. Also, when the smartphone is heated, there is a risk of pouring this design and, in which case problems may occur when the tray is removed. It is possible that it will have to get to have to contact the service center. In this case, the device is removed from warranty.

So, if you realized all the listed risks, then to continue you need the following devices:

  • SIM card format Nano (because it is easier to cut and "disassemble")
  • MicroSD format memory card
  • Lighter
  • Scissors, blade or any other sharp object
  • Slim bilateral scotch (preferable) or super glue
  • Some free time, patience, head on shoulders and straight hands

To install at the same time two SIM cards and memory card in Samsung Galaxy S7 or Galaxy S7 EDGE you need:

  • Determine the correct position of the SIM card
    First you need to determine the correct position of the SIM card in the tray. Cards different operators Can have different configuration of contacts. The author of the source instruction carried out operations on SIM cards U Mobile and Maxis (Malaysia) operators. Usually all SIM cards have a special key on one side (cut angle).
  • Disconnect the SIM card chip from the base
    Any SIM card consists of a plastic base and a microchip glued to it with a contact platform. Gently heat the SIM card from the opposite side (where plastic). This may require from 30 seconds to 1 minute. Then gently separate the chip with the contact pad from the base. As an auxiliary tool, it is recommended to use a sharp object (scissors, knife, blade, etc.). After that, the chip needs to be cleaned of glue or plastic residues.
    If everything went smoothly and you did not have to change the SIM card, then we can count half the path passed.

  • Cut the SIM card microchip
    Now you need to carefully cut the SIM card contact pad to accommodate on the memory card. It is usually required to shorten it by 1-2 mm on each side (as in the photo).

  • Secure a SIM card on microSD
    You can do this using a two-way tape (in which case a memory card can be easily (less) "release") or super-glue (this option is less preferable, since if you damage the SIM card chip, then separate it from the memory card It will be quite difficult or even impossible). For proper placement and the first step was provided. In addition, make sure that the microchip angle of the SIM card is aligned, as in the image (collapsed in red).

  • Place the finished design in the tray
    Now it remains to place a gene-modified microSD card in the tray, and the tray itself is in a smartphone.

Finally, you need to check the correctness of all actions. If everything is done correctly, then Galaxy S7 will "see" two SIM cards and a microSD memory card. It will look like this:

It is also worth noting that the method described above is suitable for all smartphones with the same hybrid tray for SIM cards. In particular, there is a similar experience with the owners Meizu pro. 5.

Replace SIM card Samsung Galaxy S4 is a task that seems difficult and unbearable, given new standard Microsim used in the phones of this model. Users who are accustomed to solve problems with the revolution of SIM cards, as well as retrograds, changing the operator or phone number, by buying a completely different card, fall into confusion, facing this problem. We will teach you how to extract and how to insert a samsung C4 SIM card at home.

Instruction

This instruction Consists of five steps. You will need a special plastic blade, long nails or some comfortable and soft thin item that you can simply come up with some details.

Step 1: Patty the left edge of the samsung's back cover with a nail or spatula. A special connector for this is at the main chamber level and power management buttons.

Step 2: In the gap, which formed now, insert a plastic blade and push it from left to right, the blurring latches consistently (these latches are located all over the perimeter of the inner part of the telephone housing). At that moment, when the back cover completely moved away, remove it and set aside.

Step 3: After removing the back cover, it is necessary to pull the memory card from a special slot located directly under the main chamber of the device:

  • Longly push the edge of the memory card to a characteristic click.
  • Remove the shovel or finger from the card - click preceded the automatic sliding memory card with its locking tray.
  • As soon as it happened, remove the memory card and gently put it in such a place where it is not lost.
  • When assembling Samsung S4 insert it, performing steps in the reverse order.

Step 4: Patty the phone battery, remove it and postpone.

Step 5: To get SAMSUNG GALAXY S4 Sims, press it inside, how it was done with a memory card:

  1. It is necessary to press it carefully and to a friend of us click.
  2. Hearing a click, release the holder so that it can automatically pull out the tray from the socket.
  3. When the Simch tray seemed completely, the time to extract the SIM card from it.
  4. Now you can insert another card into the connector and collect the phone back.

As you can see, Microsim is not more difficult in circulation than the most common SIM card - there was nothing to be afraid!

You will need a suitable SIM card for Galaxy S8 and S8 + and you need to use it correctly.

This guide will tell you: What size is used, how to insert and change the SIM card, and how to use two sims in versions Dual Sim..

What is the correct SIM card size?

To make phone calls or use mobile data, you will need SIM (subscriber identification module), which can be obtained from any telephone operator (Megaphone, MTS, Beeline, Tele2, etc.).

Technically, for mobile phones There are 4 different card sizes:

  1. Full-sized SIM card. Often referred to as 1FF (1st form factor). This is "gigantic" size: 85.60 mm × 53.98 mm × 0.76 mm. Probably, you will not be able to find it on the market, and none of the phones on Android used such a size.
  2. MINI-SIM (2FF). In some countries, it is usually referred to as "big", "normal" or "standard" SIM card. Most operators and phone manufacturers gradually stopped their release a few years ago.
  3. Micro-SIM (3FF). Still is the most popular size for smartphones. Most of the average I. budget smartphones Use this particular map. In some regions, it is called a "small" sim card.
  4. Nano-SIM (4FF). It's the "smallest » map available today for smartphone. For most flagship smartphones It is necessary for this.

Galaxy S8 and Galaxy S8 + use Nano-SIM card.

If you just purchased new flagship From Samsung, and before that used another phone, then in it, you may have already used a Nano SIM card.

For example, some popular phones that use Nano-Sim: Galaxy S7 (EDGE), Galaxy Note. 5 and 7, Galaxy S6 (EDGE, EDGE +), iPhone 7 (7+), iPhone 6S (6S +), iPhone 6 (6+), iPhone 5, Moto X (including all generations) and many others. If you had / have any of these phones, the SIM card is suitable for Galaxy S8 (S8 +).

Nano-sim you can always get from your operator (preferable), but you can cut Micro-SIM card Alone until the desired size, for example, with a special cutter or stationery knife.

What is a slot 2 in a SIM card tray?

As shown in the figure below, the tray has two slots, regardless of the region.

Slot 1 is always designed for the SIM card.

However, slot 2, which is greater in size, can be used differently depending on your region and model.

Slot 2 is used for Micro SD memory cards and only in DUAL SIM version (the availability of the model depends on your region) You can insert the second Nano-SIM card into it.

How to insert a SIM card?

To insert a SIM card in Galaxy S8 and S8 +, you need to perform the following 5 steps, as shown in the figure below.

Step 0:Turn off the phone.

Step 1:Insert a special tool (enters the bundle) into the hole on the tray and press it completely down to loosen the tray.

Step 2:Carefully pull out the tray.

Step 3:Place the SIM card in the slot 1 metal parts addressed down.

Step 4:Secure it.

Step 5:Insert the tray back.

Step 5/1:Turn on the phone.

How to extract or replace the SIM card?

You can extract or replace the SIM card by analogy with the instructions considered above.

How to use two sims in the DUAL SIM version?

For a version with two SIM cards Galaxy S8 or S8 + you are allowed to use 2 SIM cards at once.

Please note that there are some restrictions:

  • It works only in DUAL SIM version.
  • You can not use Micro SD card while using two SIM cards.
  • Technically, they have a dual standby mode, not two active. But in some mobile networkswhere 2G is in phastenably turn off, both SIM cards can be connected to 3G / 4G networks, and both can work simultaneously as active phones with two SIM cards. Will it be able to work like this - depends on the network of your operator.

In the Dual-SIM version, control is carried out in the "Settings - SIM-Card Manager" menu. You must specify which methods are designed to transfer mobile data (although both can connect to 3G / 4G networks) and which will be default for calls and messages. These settings can be changed at any time.