How to enter DIR 300 from Beeline. DIR300 (NRU B5) Firmware with Beeline to factory. Possible problems when setting up Wi-Fi-routers
Configuring a D-Link DIR-300 router is convenient and easy. To do this, you need to know the general rules for setting up routers of the D-Link routers and the features of the provider, which provides you with an Internet connection. Consider how the configuration of this router for the Beeline network is.
Initially, Beeline used such connectivity types of wireless Internet as PPTP or PPOE. Currently, the L2TP type is used, which significantly reduces the load on the equipment. This has a positive effect on the work of the home Internet.
So, we start setting the D-Link DIR-300 router for Beeline. First of all, you need to set the correct settings of the network card. We must set the automatic receipt of the IP address. If your computer installed an operating system Windows XP.We go to the "Start" menu, select the "Control Panel" and looking for the Network Connections icon. Click on it right mouse button and click on the "Properties". You will see a list in which you want to select the TCP / IP Internet Protocols.
Click on the "Properties" button and check which items are marked by a point. We need to be marked by all phrases that end with the word "automatically".
If you are a Windows 7 user, go to the "Start" menu, go to the "Control Panel", select "Network and Internet", and then "Network Management Center and Common Access". In the left column we find the item "Change the parameters of the adapter". Click on it right mouse button and select "Properties". Open a double-click "Internet Protocols Version 4 (TCP / IPv4) and set the points opposite the phrases, at the end of which is the word" automatically ".
After we set up the settings, you can proceed directly to connecting the router. Insert the provider cable to the "Internet" port, and the short wire is one of four LAN ports. The other end of the wire is set to the computer's network card.
The next step is authorization. We run on your computer any Internet browser and prescribate the IP address of the router in the address bar. Default - 192.168.0.1. The authorization window appears. In the "User Name" and "Password" fields, write "Admin" and "admin", then click "Login".
A new window will open in which you want to select "WAN". By clicking on the "Add" button, you will be taken to the New Connection Creating page.
There you will need to enter the data required to configure the Beeline connection.
In the drop-down list "Connection Type", select the option "L2TP + Dynamic IP". As mentioned above, it is L2TP that Beeline is currently using.
Then fill the "User Name" and "Password" fields. There you need to enter the data obtained from the provider. Usually they are specified in the Connection Tool. If you have lost a copy of the contract, call the technical support service Beeline and specify your data.
And finally, in the "VPN-Server address" column, we enter "tp.internet.beeline.ru". Then click the "Edit" button to save the new Internet connection settings.
The next step is setting up Wi-Fi. Returning to the "Advanced Settings" menu and in the Wi-Fi section find the item "Basic Settings". In the SSID field, you must specify the name of the new network. You can choose any name by your own way. Enter the name and click the Edit button.
Who is not interested in reading the background Read the text after the quoteLast night, a break, all the advice tried to alter my router back to the factory firmware (once he moved to Beeline), faced with difficulties. First of all, I tried stupidly through the menu. Update specifying the factory firmware version 1.3.3. Update did not happen, that is, Tsatus walked that the update was even wrote that it was successful that the standard Biline Menu (the address of the router on the Biline firmware 192.168.1.1). Next, following the advice (Naturally, the router is connected to the computer) Customizing the network connection IP 192.168.0.10 MASK 255.255.255.0, I cut down the power of the router, climb the rezet turn on the trip 15 seconds (I tried 20 and 25) trying to constantly log on to the router at line 192.168 .0.1 (and 192.168.1.1. There are no early assemblies of the difference in principle
So let's go:
1. If the router does not feed any signs of life, or only the orange diode "POWER" is lit, then the first thing we take out all the cords from the router, including meals.
2. Kacham S.
Attention! Sign up to see the hidden text.
firmware, file.bin from the DIR-300NRU / Firmware / B1_B2_B3 folder strictly for our router and save for example right to disk with
3. We go to the settings of the network card and in the properties of the TCP / IPv4 protocol, we prescribe an IP address 192.168.0.10 Mask 255.255.255.0
4. Next, connect the wires of the network card of our computer with one of the LAN ports of the router, let it be LAN1.
(To return the factory firmware, the DIR-100 you need to connect the computer's network card with a WAN - port of the router (Internet). Specify the location of the previously downloaded firmware and follow the link FLA.)
for DIR-100
5. In the paper off, clamp the RESET button (match or other blunt item) and keeping it connecting the power of the router
6. Without releasing the RESET button (20 seconds), we wait until the emergency mode of restoring the router is loaded.
7. In the Mozilla or Opera browser (not IE only), you collect dres 192.168.0.1 and omit the RESET button.
8. We indicate where the firmware is lying (where we downloaded it) and click Upload Firmware Now.
Next, wait until the update is completed
9. If everything is done correctly, then after completion we will see the authorization window of our D-Link /
Login and password will return the default Admin / empty
After such disadvantaged manipulations, you can restore the factory firmware D-Link after a failure, unsuccessful firmware or after third-party firmware.I repeat this article did not help
As a result, everything is ingenious simplyIt is necessary from the DLINK repository http://ftp.dlink.ru/pub/router/dir-300_nru/firmware/ choose our assembly in our case "B5" (you can only find it on the bottom of the Roter) only if you flash B3 then hike The service is guaranteed there in the same repository you can find another useful info such as instructions for different versions of http://ftp.dlink.ru/pub/router/dir-300_nru/.
We are looking for with expansion. FWZ I chose (Dir_300Nrub5-1.2.94-20110414.fwz)
Next, entering the standard Bilain router menu at 192.168.1.1 by entering the advanced settings, then the system, by selecting this downloaded file, click Update updates longer, but not more than 4 minutes and eventually break the connection and more at 192.168.1.1 Router is not Appears, go to the address 192.168.0.1 and get into the router menu. What was from the store Login and Password Default (Admin login, password Admin) Next, we update where we want and how we want, I had the need to leave the biline firmware in connection with the change of provider On TTK (I left Gudlein on it with the Bilain firmware worked well) previously connected the Beeline and the factory router from the store seated on Beeline. Since the IP TV consoles to the TV behaved inadequately after the over-checking, everything became stable.
To connect the D-Link DIR 300 router to the Beeline network, optionally call the masters. After all, it is easy to set up. Communication operators provide all opportunities for this. You do not need to enter IP addresses, subnet masks, DNS, if there is a firmware from the provider. And with the factory firmware there will be no problems.
How to configure the D-Link Dir 300 Beeline router
The new modem you purchased in the store can be immediately connected. But if the device used earlier, it is better to reset the parameters.
Connection
To configure the modem, it is better to directly connect it to a computer. Then you can use Wi-Fi if you need it.
If you want to attach a modem via switch or SWITCH:
- Insert the Internet cable to the port of Svitch.
- In exactly the same wire (WAN), connect the switch to the internet modem connector.
Initial setting
If you configure the modem for the first time, check if the system sees the new equipment.
- Go to the "Network Management Center".
- There must be a D-Link Dir 300 network. Even if you have no connection with Beeline.
With Wi-Fi, everything is different:
- Click on the network menu on the taskbar. Or in the same "control center" click on "Connect to ...".
- Current and affordable connections will pop up.
- Select Network.
- Connect button.
- Enter the password from Wi-Fi.
Now you need to configure IP and DNS:
Firmware
First, find out what kind of router is. He has several models (for example, B5, B7, A1). And for each created its own firmware. You can see the version in the documentation for the device. And it is also indicated on its body - look at it a sticker with serial numbers. "H / W VER" - model model, "F / W Ver" - version of software.
Software from the manufacturer is on D-Link.ru.
- Visit their website.
- Go to "Quick Search" and open DIR 300 in it.
- Or find the device in the "Products and Solutions" section, subsection "Routers".
- The product page has features and images. You need the download tab.
- At the top there is the new firmware. Below are previous versions. There are descriptions of functions and improvements that are added with each update.
- And there you can download installation and configuration guides.
If you did not find the software that is suitable for the modem, go to the FTP server of the company D-Link - ftp.dlink.ru.
- Open the PUB folder in it.
- Then Router.
- Find your router model - DIR 300.
- Firmware directory.
- Choose software. File-installers extension. BIN. The main thing is that the version of the program is above the one that is installed, and approached the model.
- You can go to the OLD folder. There are previous options utilities.
If you acquired a modem in the official stores Beeline, most likely, it costs the firmware from the operator. It is not so easy to put another. Reset configuration does not "return" the factory software. To change Firmware, it is better to contact the service center.
Installation of firmware
To change the factory Firmware:
Change by operator
Reflash the router from Beeline will not work in this way. Firmware from the manufacturer has format.bin. And the device purchased from the operator, reads only. FWZ. To change software, better take the router to the service center.
IMPORTANT. You can put the original program from the manufacturer in "home conditions". But it is dangerous for the device. If you first connect the modem, do not risk.
The first way is to complete the firmware.
- "Network Management Center" - "Adapter Settings".
- Open the "Properties" of the connection to which the router works.
- Next - "Properties" of the TCP / IPv4 protocol.
- Assign a temporary IP computer. To do this, select "Use the following address" and enter, for example, 192.168.0.11. When removing the Firmware, the modem may change the IP. If he and the network card has the same address, you will not open the web interface.
- Disconnect the router from the power grid.
- Hold the RESET button (insert the rod into it).
- Not releasing it, connect the modem again.
- Wait 30 seconds.
- Release the button.
- Try to enter the modem interface. Only not at the address "192.168.1.1, as on Beeline Routers, and according to" 192.168.0.1 ".
- Only a button for downloading a new firmware will be available.
- After installation, you can again set the automatic IP receipt.
The second method is "intermediate" Firmware.
IMPORTANT. Both methods can lead a modem into disrepair. Loading the firmware that is not intended for the modem, or its complete removal is a risky entry.
Web interface and final configuration.
To configure the connection, you need some data that you will provide a communication operator.
Factory firmware
Firmware from the provider
Setting up the modem from Beeline is much easier:
- Go to the Web interface - "192.168.1.1".
- Enter login and password.
- Come up with the name and access code for the Wi-Fi network.
- Specify to which LAN port will connect a TV console.
- You can also put a password to the modem itself.
- Click "Save".
- Wait until the device restarts.
In the factory Firmware, the Wi-Fi and IP-TV options work in the same way. But they are in different menus. D-Link DIR 300 router from Beeline can be configured very quickly. All parameters are exhibited there in advance. You just need to enter a login and password. But if you decide to change the provider, reflash such a router will be difficult.
In order to get to the web interface of the router, you need to open your internet browser and in the address string to dial 192. 168.0.1, User Name. - admin. , Password. - leave this field empty (Provided that the router has factory settings, and its IP has not changed).
Changing the factory password
Default: Login admin., Password empty.
Maintenance, Menu Device Administration.
In field NEW PASSWORD. Enter a new password.
In field Confirm Password. repeat new password.
Then press the button Save Settings.
After that, the router will suggest re-entering its settings.
Connecting Internet Connection
In the router interface, you must select the top view tab Setup., in the opening list, choose Internet Setup.. Press the button MANUAL Internet Connection Setup
Configuring PPPOE Connection
- In field MY Internet Connection IS: Choose Russian PPPoE (Dual Access)
- User Name: Your login from the contract
- Password: Your password from the contract
- CONFIRM PASSWORD: Repeat password
- Press the button Clone Mac Address
- MTU: 1472
- Connect Mode Select. - Connection installation mode Always-ON. For permanent connection
- Save the settings button Save Settingsand we wait until the router reboots.
Setting up L2TP connection
- In field MY Internet Connection IS: Choose RUSSIAN L2TP (Dual Access)
- Dynamic IP.
- Press the button Clone Mac Address
- Server IP / Name - IP / Provider Server Name
- PPTP Account
- Pptp password.
- PPTP Confirm Password.
- MTU value - 1400
- Connect Mode Select. Always For permanent connection
- Save Settings
Setting up PPTP (VPN) with automatic receipt of the local IP address (DHCP)
- In field MY Internet Connection IS: Choose RUSSIA PPTP DUAL ACCESS
- Select a connection with a dynamic assignment of the address provider Dynamic IP.
- Press the button Clone Mac Address
- Server IP / Name - IP / Provider Server Name
- PPTP Account - username for authorization in the provider's network
- Pptp password. - password for authorization in the provider's network
- PPTP Confirm Password. - Repeat the password for authorization in the provider's network
- MTU value - 1372
- Connect Mode Select. - Connection installation mode. Choose Always For permanent connection
- Keep the settings by pressing the key Save Settings
Setting PPTP (VPN) with a static local IP address
- In field MY Internet Connection IS: Choose RUSSIA PPTP DUAL ACCESS
- Put the point on the contrary Static IP.
- IP Address: Drive your IP address under the contract
- Subnet Mask: Drive a mask under the contract
- Gateway: Drive the gateway under the contract
- DNS: Drive Your Provider DNS (Rostelecom Omsk - 195.162.32.5)
- Server IP / Name: PPP.LAN.
- PPTP Account: Your login from the contract
- PPTP Password: Your password from the contract
- PPTP Confirm Password: Your password from the contract
- AUTO-Reconnect: Always-ON.
- MTU: 1372
- Connect Mode Select. - Connection installation mode. Choose Always For permanent connection
- Keep the settings by pressing the key Save Settings.
NAT with automatic receipt of IP address (DHCP)
- MY Internet Connection IS: Choose Static IP.
- Press the button Clone Mac Addres..
- Keep the settings by pressing the key Save Settings.
Setting up Wi-Fi on the router
In the router interface you need to go to the tab Installation (Setup), Menu Wireless Setup Installation (Wireless Setup). Button MANUAL WIRELESS CONNECTION SETUP).
- In chapter Wi-Fi Protected Setup C paragraph Enable Tick \u200b\u200bis better to remove, because not all wireless adapters support Wi-Fi Protected Setup technology;
- Specify identifier SSID Your Wireless Home Network (Tochka) in the field Wireless Network Name. (default dLink)
- Select a wireless channel, any channel from the drop-down list Wireless Channel
- Select security mode wireless network
- In the drop-down list Security Mode. choose Enable WPA / WPA2 Wireless Security (Enhanced) - This is the most secure way to protect your wireless network.
- Cipher Type - TKIP
- PSK / EAP - PSK
- In field Network Key. You must enter any set of numbers, length from 8 to 63. They must also be remembered so that you can specify them when connecting to the network
- Click on the button Save Settingsto apply and save settings
Check the status of connecting to the Internet
Saving / restoring the router settings
After the setting, it is recommended to save them so that in the event of problems, it was possible to restore them. To do this, go to the Maintenance tab (Maintenance)Menu Saving and Restore (Save and Restore).
- To save the current router settings, click the button. Save. (parameter Save Settings To Local Hard Drive). The settings file will be saved to the specified place on the hard disk.
- To restore settings settings from the file, you must click the button Overview, specify the path to the file with the settings, then click the button Upload settings.
Attention! Pressing button Restore Device. will restore the factory settings!
DRETERS DIR-300 D-LINK manufacturer are located in a number of budget models. However, devices are successfully used to organize cable and wireless local networks that combine users using Wi-Fi technology. Work occurs in the networks of the main Internet operators.
Configuring the D-Link DIR-300 router for Bilain is easily performed by the user independently subject to the recommendations of the article.
Connectors for the execution of cable connections are located on the back of the product housing panel. With the RJ-45 connector, marked as WAN (Internet), the provider's cable that uses the FTTX type of connection along the dedicated line is allowed. In our case, it is Beeline. Other RJ-45, designated LAN1-LAN4, serve for cable subscribers who do not have built-in wireless communication modules.
To power the router, a rectifier device with a plug connector inserted into the socket with the designation "5B \u003d 1,2A" is used. There is an additional ON / OFF button to turn on the power on. RESET / RESTORE reset button, located in the enclosure of the case, is designed for hardware reset of the current router settings and return them to factory values. The high-frequency socket is screwed by an antenna from the set of butt to the DIR router. Its initial setting is performed using a stationary computer (PC) connected by an Ethernet patch cord to one of the LAN ports of the DIR router -300.
Setting up PPPTP- or L2TP connections from Bilain
Let's start checking the PC network card settings. Make sure the DHCP is turned on by automatically assigning IP addresses and the DNS servers addresses. TCP / IP 4 versions. If the specified step is not made, we note these items and confirm the action by pressing the OK stencil.
In the next step, we get access to the DIR-300 interface, where we install the Beeline network settings. The provider recommends on its site to configure the L2TP protocol for Beeline. To authorize, enter the IP address of 192.168.0.1 DIR-300 in the address bar of the browser open to the PC, press ENTER. In the pop-up window, drive the login data and password for the entrance (Admin / Admin). After that, click "Login". IP address and authorization data learn from the information label on the bottom of the DIR router case.
In the "Advanced Settings" section in the "Network" tab, select the WAN section. On the section page, fill the fields as follows:
- any name of the connection;
- type - L2TP + Dynamic IP;
- username and confirmation password - data from a contract prisoner with a provider;
- vPN server address - tp.internet.beeline.ru.
Additionally, we note the markers automatic receipt of the DNS server address, turn on the NAT and network screen, automatic connection with the VPN server.
To connect via PPTP protocol, the type is selected appropriate. The address of the server used is vpn.internet.beeline.ru.
After executing the "Save" command, a page with a new connection created will open. On the right above is visible a light bulb in a flashing mode. It signals that the connection is broken by the "biline", the configuration is broken and must be saved. We agree with the proposal, click "Save". As a result, the flashing of the bulb will stop, and the connection of the DIR will receive the status "connected" with a burning green indicator.
SETTING IPOE.
On the operator's website, a message was published that the home Internet transition to a new type of connection is determined by "bilay" as automatic. To access the network, the user does not need to press the operator's label on the desktop PC. The starting Internet page appears immediately after turning on the computer. Activation technology using VPN requires a large load on the subscriber equipment. With an IPoe, it takes on a special provider router.
To initially configure from the user, after entering the DIR interface in the WAN-connection type, specify the "dynamic IP address" and execute the "Save" command.
In an open Web browser, go to the operator's website: login.beeline.ru. In the form of entering a login and password from the contract, click "Login". All settings are conducted on the provider side for 10 minutes. The browser start page appears.
Configure Wireless Wi-Fi-Network
Press the stencils "Extended Settings" at the bottom of the main page, we find the Wi-Fi tab. Next, go to the section "Basic Settings". It is prescribed by the name of the DIR-300 router network, thanks to which we will find it in the list available. Then we determine the region: Russia, and the mode is 11bgn Mixed, the number of the working channel and its width is "Auto". We put markers in wireless broadcast resolution cells while saving the DIR-300 name. Keep the entered values.
Go to the "Security" section. There we specify authentication parameters: WPA / WPA2-PSK, encryption type - AES, as well as an individual key (reliable wi fi password). Click "Save".
The settings come into force after rebooting the DIR-300 by turning off it and re-activate after a minute. The reboot is carried out on the next path: "System" - "System Tools" - "Restart".
Setup IPTV.
The D-Link DIR-300 router supports IPTV if the operator provides such a service, and I paid for a subscriber. Viewing interactive TV is carried out using the STB console, connected by an Ethernet cable to one of the LAN ports of the router. The "IP-TV" tab is selected in the DIR-300 menu,
section "IPTV Setup Wizard", on its page programmatically assigned a port transmitted to a transparent bridge mode for a TV console.
After saving this assignment, the LAN connector is used only for television viewing.
Firmware
To carry out the update procedure without unwanted consequences, it is necessary to properly determine for the DIR-300 hardware version or revision H / W Ver. As well as the version of the F / W VER software. Information about them is available on the product label.
For example, revision B1, B2, B5, B7. The latest acting firmware manufacturer is on its official website. To do this, you must specify the complete information about the DIR-300 model used. Data available in the Firmware directory as an archive. The latter by date the release is downloaded to the computer and unpackled. The installer file has an extension.bin.
Installation of firmware
Select the "Advanced Settings" mode, we find the "System" tab, and in it - the "Update software" section. On the section page we find the "Overview" button and by clicking on it, we are looking for the path to the downloaded file on the PC. After finding the desired click on the "Update" button.
At the end of the download, the router will reboot. After installing the new firmware from the manufacturer, the entire procedure for setting the parameters of the local DIR-300 network is to be proceeded.
Change by operator
In the case of the acquisition of DIR-300 in the operator's outlets for changing the firmware of the router to the original factory, the method described above is not suitable. The fact is that the Firmware D-link has a installer file with extension.bin, and Beeline is able to "read" only.fwz. In "home" conditions, several methods of solving the problem are used.
In both cases, the change of software begins with a hardware reset with the RESET button on the DIR-300 case or restore the factory settings through the router menu.
At the first PC method in its protocol, third-party static IP from the DHCP range is first assigned. The entrance to the router interface is carried out at 192.168.0.1. After loading the new original firmware, saving it on the computer in the "System" tab of the DIR-300 interface, the "Update" section is selected. Further actions are performed as described above.
After rebooting the router, you must not forget to return the computer in the TCP / IP protocol automatic mode of receiving addresses.
The second way is to install the "intermediate" firmware. It must be sought on the Internet sites, and then update to the "native" valid value.
In any case, these update methods are a rather risky check.
If you incorrectly selecting the source data or contacting the untested source of information, you can withdraw the DIR-300 router with subsequent restoration of it in the service center with financial costs.
Possible problems when setting up Wi-Fi-routers
All the problems arising are to:
- malfunctions of the hardware of the custom equipment;
- failures in its software;
- outdated or incorrectly selected versions of firmware;
- user errors when conducting configuration due to its inattention or lack of due experience.
In general, the configuration of the DIR-300 router is convenient and simple. For independent actions, you need to know the general rules and features of the Beeline provider, strictly follow the step-by-step instructions presented in the article.