Acer Iconia Tab A200 firmware. Instructions for receiving root and installing ClockworkMod Recovery for Acer Iconia Tab A200 Acer Iconia Tab A200 tablet firmware
Experienced Android users sometimes joke that tablet or phone without root - I don't care that the suitcase without a handle. And indeed, to get full access to all the features of the Android system, we will definitely need to have a root user right on your device.
Without root, it is impossible to make a full backup of applications along with the settings, you cannot install many useful programs, it is impossible ... In short - a lot can not. And with root rights, this is all "a lot of things" becomes possible. Get root on some devices is quite difficult, and you need to have special skills. On other root devices right with the help of special utilities, get very easy, and to such devices, fortunately for its owners is a tablet Acer Iconia Tab A200. And today I will tell you how to do it.
On tablet Acer Iconia Tab A200 Root right is the easiest way to get using the Acer Iconia Tab A200 SIMPletOOLS script. At the same time, this script will help you install an alternative CLOCKKWORKMOD Recovery recovery menu, with which you can make full backup copies of the entire tablet system (its current firmware).
You can download the Russified Version of the Script to get Roots right at this address.
Use the script is very easy, almost all the prompts you will see on the screen.
Instructions for receiving root and install ClockWorkMod Recovery for Acer Iconia Tab A200:
Attention! All you do, you do at your own risk, and nor our website nor the developer of this method are responsible for possible damage to your tablet.
1. In the tablet settings, in the "Applications" section -\u003e "Development", enable the "USB debug" mode and make sure that your A200 battery is charged at least 60%
2. Unpack the previously downloaded file with a script into a separate folder on the computer.
3. Download the drivers of your tablet from here or from here and install them on your computer. Go to the next step only after the installation of the tablet drivers.
4. Connect your A200 to a computer using a USB cable.
5. Run the file on your computer Acera200simpletool rus.bat.
(This is the Russian version of the script, the original, the English version is in the acera200simpletool.bat file)
6. After starting the script, confirm in it that the tablet drivers on your computer are already installed.
7. Now you need to unlock the tablet bootloader. To do this, select the appropriate item in the script menu, after which your A200 will restart and you will see two icons on its screen. Using the volume key, make a choice and use the volume button to confirm it.
8. After unlocking the bootloader, the tablet will ask for a reboot. To do this, press any key on the computer keyboard.
9. After restarting the tablet, you can select one of the options in the script menu:
Only getting root
ClockWorkMod Recovery Installation only
Root and installation ClockworkMod Recovery
Select the desired menu item and follow the instructions on the computer screen.
10. Enjoy the results of the work done.
If you need firmware A I T A3A11 32GB Write in this thread the full number of your model and the desired version of Androyd! It remains only to install this firmware. Before the firmware, it is necessary to obtain the rights and establish CWM R to A A A200 I T. The new tablet from the company's attractive pricing policy of A I T A200 32G. Firmware for tablets A. p The tablet is determined everywhere as A A500, the status of the bar and AR is edited, download. A iconia t a200 32GB
Alas, so far for tablet a i t a210 none. The results of this tablet in SS on the original firmware with a 3. To download the firmware in A I T A200 16G, you must have an account on our Internet portal. Programs for firmware A I T A200. A friend said that on my 200 firmware flew, and now it is necessary to change it, but I do not know how. Firmware A I T A810 and A811
A I T A200 is good, but a little outdated. Add a detailed video firmware A I T A200. Then unpack the firmware for A I T A200 16G if the file is in the archive. Download and install a USB driver for A A200 I. Also you will find games, apps, wallpapers, instructions, firmware and drivers. Firmware Tablet A I T A200 Instructions
At the same time its creation. After custom firmware on 4. USB driver for A Iconia Tab A200. A SDK T Developer Utilities A USB 1. Update Model A I T A200, which has received a more recent OS and 4 core processor. Blancs A I T A200 will appear in Russia in February
To do this, press any key on the computer keyboard. As for the new firmware itself, it was not kept from experiments over I C. After that, the tablet will reboot and see on. View new publications. Theme A Iconia Tab A200 firmware. A 200 Firmware 4 Downloads and install on USB PC drivers for T in the tablet settings include
But you can upgrade the firmware to the most. Restoring the killed A I T A200. A friend said that on my 200 firmware flew, and now it. There is a tablet A I T A200 card LA8111P is not started. After unlocking the bootloader, the tablet will ask for a reboot. Company A reported today that the top version of the tablet computer I T
To restore the Acer Iconia A500 tablet or any manipulations with firmware, any software for recovery requires the introduction of CPUID. While the tablet is working, find it and write out is not a problem. But usually the user will find out about the CPUID when it starts to look for information on how to restore its tablet. In cases with Acer tablets, this happens when we get the so-called "brick" . The tablet at startup hangs on the inscription Acer, does not turn on or not seen by the computer.
1. Turn off the tablet. We take a clip, clamp the RESET button, and press the POWER button. As soon as Power lights up, let go, and hold the paper clips for another 1-2 seconds. Continue the tablet via microUSB to the computer. The computer will try to determine it. Itself will not be able to find the driver. We take the driver from paragraph 2, and load your hands.
2. Install USB Monitor from paragraph 3. Trial version. Click Continue. The program will define the device as Acer Picasso USB Boot-Recovery DRIVER.
3. In the middle part of the application window, by clicking on the RAW Data View line, the Start button below the START window, as a result we get. 
4. Run the command editor on the PC (Start - Run and type CMD).
11. Using the CD command, go to that folder to which you unpacked the NVFLASH.zip archive. (Example: CD D: \\ NVFLASH)
5. Next, score NVFlash -Sync.
6. Switch to the USB Monitor Studio window. We get: 
This is our CPUID. The first 8 pairs of characters rewrite in the reverse order (we save order, that is, we change the pair and not location). That is, if it was 01 06 ... .A5 03, then our CPUID will be 03 A5 ... .06 01.
P.S: Remember, all actions you make at your own risk, the chip-master service center is not responsible for the consequences of your actions, the instruction is repeated repeatedly, and is used by engineers of our SC to repair technology.
Before the firmware, you need to get root rights and install ClockworkMod Recovery on A200 Iconia Tab:
Download and install on PC
In the tablet settings, include "USB debugging" (Settings for Developers - Debugging by USB)
Connect the tablet to the PC using the USB cable and wait for the driver to install
Download and unpack any convenient place archive
Run the ACERA200SimpleToolrus.bat script (you may need to start on Windows 7 on behalf of the administrator)
Confirm that all tablet drivers are installed on your PC, selecting item 1.
After confirming the installation of the drivers, select item 1 - Unlock the loader ...
after that, the tablet will restart and see two icons on his screen ("Open Lock" and "Open Door") on its screen. Using the volume button (with two points), make a choice ("open lock") and using the volume button (with one point) confirm it. Act quickly, otherwise the menu closes along the timata.
After unlocking the bootloader, the tablet will ask for a reboot. To do this, press any key on the computer keyboard.
After rebooting the tablet, choose paragraph 2 - only root-right ...
The script will start executing the commands and the very end will see the inscription everything is in order!. Now you have full access to the tablet system.
By the same scheme, you can install clockworkmod recovery by selecting the appropriate item in the acera200simpletoolrus.bat script menu or make Root access and CWM Recovery at one action.
ClockWorkMod Recovery must be installed.
Download and copy a tablet system formatting script to an external SD card
Download the firmware you are interested in and copy it to an external SD card (for example :)
Reboot to Recovery mode, for this there are several ways:
a) Turn off the tablet, clamp the volume button and the power button and hold until the Recovery menu appears
b) if root rights, you can use, for this you need to write in its window:
sU.
reboot Recovery.
c) You can also restart the tablet to Recovery mode with (or rather adb.exe), for this:
Start - Run - CMD and in a command line we prescribe a command:
aDB Shell.
sU.
reboot Recovery.
While in the Recovery menu, select Install Zip from SDCard - Installing the ZIP file from the memory card, then
chooze Zip from SDCard - Select a zip file on a memory card for installation, select the acera200superwipe.zip file and confirm the selection. After the script is executed Recovery reboots.
In the next step, we choose the firmware file you are interested in (core, graphic patch or FLEXROM) that you have copied to an external SD card.
Press Reboot System Now, the firmware is installed. Now the tablet, quite a long time, will be loaded in the usual mode.
Firmware:
Official
Castomny:
Fashion based firmware from Acer A500:
Deodex.
Zipalign
Busybox.
Support scripts init.d.
Kernel 1.5Ghz by Onyx
Stock Software update
Acer applications are deleted (you can flash separately by the archive in the "FLEXROM" section)
Edited by build.prop (the tablet is determined everywhere as Acer A500)
Edited Status Bar and Acerring