Adjusting the sound on an asus laptop. Why doesn't sound work on my laptop?
Hello, dear readers.
Laptops are the same computers, only they have a modified structure. That’s why similar problems arise for them. Today I would like to tell you how to restore sound on a laptop? This is common among users of mobile computing devices. In this case, the cause could be anything. In the following article I will talk about all the possible solutions to the current situation.
The simplest and most common problems in the event of loss of sound can be safely called software ones. This was especially common on Windows XP. The solution is a simple reboot. In most cases, after this everything returns to its place.
Safe Mode( )
If restarting doesn't help, you can go to safe mode. To do this, before starting Windows, click “ F8" The system will check all the necessary drivers and, if possible, correct anything. Then simply restart your device and select normal boot.
Columns( )
If you are using external speakers for playback, check that they are turned on. In addition, you need to make sure that the connection to the main device is correct, is the corresponding plug fully inserted into the correct socket? The best option would be to check on other devices
Sometimes the cause is simply a volume control turned down to minimum.
In addition, it is advisable to check on your Lenovo computer or any other manufacturer that the new playback device is connected.
Settings( )
Another common case is that the sound is turned off in the settings of the computer itself. To check, just click on the corresponding picture in the tray.
After this, we perform the chain of actions:
In some cases, users may not see the required component at all. To see everything, click on the empty field of the tab “ Playback" and select " Show disabled devices».
If there is no icon in the bottom bar, it is worth going a little way to find a suitable place:
Let's go to " Start" And " Control Panel».
Services( )
Sometimes users of Windows 7 computers encounter a situation where the problem is a disabled service " Windows Audio" To check, you need to perform several steps:
( )
Another common problem in Windows 10 is the use of incorrect drivers. To find out, you need to go to " Start", and then " Control Panel" Next, go to “” and look for those that are responsible for the sound.
If there is an exclamation mark next to them, most likely the driver on the Acer laptop is damaged or has the wrong version. This means it needs to be reinstalled. There are several basic ways to do this.
So, the first and simplest is to use a special disk or flash drive that comes with the card. But recently, this is practically no longer practiced, since the same Windows 8 provides a base that is sufficient to use almost any device. So you can look in the box your laptop came in - it's quite possible that it's there.
Another handy built-in tool is to use " Device Manager»:
The operating system will automatically install everything you need. In some cases, you will need to restart the device.
There are also situations when, as a result of an update or even after installing Windows 10, the sound disappears. This occurs as a result of using inappropriate collateral.
Try going to the same tab "" in " Device Manager" If the button " Rollback"- press. This will cause the OS to start using the previous version of the software. Sometimes this helps.
Also download the driver from " World Wide Web"You can use a special program. It is designed to identify outdated software on your computer, then search for new versions and automatically install it. Among them we can highlight Driver Updater and DriverPack Solution. The first program scans the system, creates a list of outdated drivers, searches for new ones on the Internet, downloads them and installs them. The second option is a collection of many applications. The system simply finds the necessary elements and immediately installs them. But unlike the first one, its size is noticeably larger.
You can also try to find everything you need yourself. If you know the manufacturer of your card and its model, great. You can safely go to the official website for the appropriate solution that will return the sound. But what to do if it disappears and users do not know the necessary information?
Let's go again to " Properties» devices in the corresponding manager. Let's go to " Intelligence" In the " Property"select "". In the window " Values" one or more lines will appear. We copy the first one and go to the Internet to search for suitable software. Then download and install.
BIOS( )
Sometimes there may be no sound due to the card not being enabled in the BIOS. Step-by-step instructions for solving the problem look like this:
The computer will restart and all that remains is to check the operating status of the corresponding device.
Problems with the card( )
And the most unpleasant, but also common reason is a faulty card. Moreover, the disappearance of sound can occur at any moment - while watching a movie, listening to music, or even in complete silence.
The solution is replacement. Today you can purchase new appropriate equipment relatively inexpensively. True, it will be the simplest. To use complex systems, it is important to have the appropriate equipment.
It is worth saying that in macbook pro in most cases users resort to this method.
Like any other device, a modern computer requires settings, and one of these settings is setting up the sound on a Windows 7 computer. All computers and laptops manufactured today have a built-in sound device. This device is called a sound card. Typically, the average user is satisfied with the sound quality and range of settings of the integrated sound card. Music lovers can purchase a separate sound card with advanced settings. Let's see how to set up sound on a Windows 7 computer for both cases.
Standard sound settings on a computer
When installing the operating system, the sound on your Windows 7 computer is automatically configured. If this does not happen, you need to open the "Task Manager" and check whether all devices are turned on and whether drivers are installed for all of them. If there is a exclamatory sign, it means the drivers are not installed - they need to be downloaded from the manufacturer’s website and installed. If there is a red cross next to the device, it means it is disabled. You can enable it by right-clicking on the device and selecting “Enable”.
A sign that everything is fine with the sound on your computer is the presence of a speaker icon in the lower right corner of the screen.
To adjust the sound on your Windows 7 computer, click "Start", go to "Control Panel" and find the "Sound" icon. Further settings are made here.
Let's see how to set up speakers on a Windows 7 computer. In the Sound window, on the Playback tab, click the Setup button. Here you can check the sound of the speakers by simply clicking on them in the picture.
Once you're sure everything works, click "Next" and in the next window, check the box to configure full-range and surround speakers (if any). "Next" again and "Done." Setting up speakers on a computer Windows 7 is complete.
Let's see how to set up sound effects on your computer. In the same Sound window, on the Playback tab, select the speakers and click Properties.
In the new window, on the "General" tab, you can see which connectors are connected, on the "Levels" tab, you can adjust the volume of the speakers and microphone, and on the "Advanced Features" tab, you can enable or disable various sound effects.
Save the settings by clicking OK.
Read about how to set up a microphone on a Windows 7 computer. You can find instructions for setting up headphones on a Windows computer.
Setting up sound on a Windows 7 laptop
Let's see how to set up sound on a windows 7 laptop. Unlike a computer, a laptop has built-in speakers to play sound. Let's answer the question of how to set up speakers on a Windows 7 laptop. We follow a similar scheme: through “Start”, “Control Panel” and “Sound”. In the window that opens, we make the same settings as if we were adjusting the sound in a Windows 7 computer.
Laptops have an interesting function key Fn. Look closely at your laptop keyboard and you will see that some of the keys have different icons. We are interested in the speaker icons.
Pressing the Fn key and the cross-out speaker key will mute the sound. Use the speaker and arrow keys to increase or decrease the volume.
As you can see, there is nothing complicated about how to set up speakers on a Windows 7 laptop.
Software sound settings on a computer
You can adjust the sound on your computer not only using standard means. As a rule, manufacturers sound cards provide utilities for more precise configuration of their devices. Consider a utility from Realtek.
Realtek HD Manager is a program for configuring sound on a Windows 7 computer.
In Windows search, type Realtek HD Manager. The program will open. Here all the settings are collected in one place. On the main page you can configure your speakers or headphones. The types of connectors and connected devices are also shown here. Adjust the sound volume by moving the slider, and also adjust the speaker balance. Select your speaker configuration from the drop-down list and hear the results instantly. Switch to the "Sound Effect" tab. Here, select your environment and, under “Equalizer,” select the type of music to play. Save the settings by clicking OK. In the same program you can configure the microphone.
Using this or a similar utility greatly simplifies the sound settings on your computer.
Conclusion
A computer and a laptop are the same devices in structure, only in a laptop the same electronic components are located in a more compact case. That is why there is no difference in how to set up speakers on a Windows 7 computer or how to set up sound on a Windows 7 laptop - everything is done according to the same scheme through the “Sound” item in the “Control Panel”.
Programs for adjusting sound on a Windows 7 computer still have an advantage over standard Windows tools due to the fact that all the settings in them are collected in one place. Setting up using standard means takes much longer, because you have to search for the right setting.
Modern integrated sound chips make it possible, even using standard settings, to achieve very good sounding music on a computer. In everyday life, the most you will be used for is turning the volume up or down. But if you are a music lover, then it is better to opt for a professional sound card and programs that provide maximum sound settings on a Windows 7 computer.
For clarity, you can watch a video for setting up sound on a Windows 7 computer.
Often, while working, new owners of mobile personal computers have the following question: “How to turn on the sound on a laptop?” It is precisely this solution that this material will be devoted to. There are many reasons that lead to this problem. Each of them will be discussed in detail in the article presented to your attention.
Test
So, how to turn on sound on a laptop? First you need to find out what the problem is. To do this, you need to close all applications and go to the audio controller control panel. It is usually located in the lower right corner of the desktop, on the taskbar. The appearance of its label depends on the device manufacturer. For example, Realtek brand devices use a bright orange speaker. Next, go to the audio controller and go to the “Speakers” tab, and then move to the “Speaker Configuration” tab. The acoustic system is depicted on it. To begin, click on the left audio signal output device, after which a test signal should immediately appear. Then we perform a similar procedure for the right speaker. If the sound does not appear, then the problem is either in the operating system or in the hardware resources of the mobile computer. But if sound appears when closing a program, then you need to check its settings. This procedure must be performed at each stage of the operation. After all, somehow you need to check whether a positive result has been achieved, whether the functionality of the speaker system has been restored. By the way, the above option is the easiest way to turn on sound on a laptop.
Just turned off the sound on the keyboard
The most common reason why a mobile PC user thinks about how to turn on sound on a laptop is to turn it off from the keyboard. Each such device has an extended functional keyboard. Its symbols are indicated in blue or red (each manufacturer has its own way). Among them there are three keys with the loudspeaker logo. On the first of them it is crossed out - with its help the speaker system is completely turned off. The second speaker is shown with one arc (on some models of mobile personal computers it is replaced by a triangle pointing down, or an arrow with exactly the same direction) - reducing the sound. The last, third key is the complete opposite of the previous one - it increases the volume. It shows a speaker with three waves (maybe a triangle, an upward direction, or an arrow). You can activate their input using a special key - "Fn". It is usually located in the very bottom row of the keyboard between "Windows" and "Alt". Therefore, we hold down “Fn” and the key that shows a speaker with three waves (or an arrow pointing up, or a triangle with exactly the same direction). Before using this method, you need to look at the state of the audio service icon. If it shows a red crossed out circle, then this method can really be applied. Otherwise, if the shortcut on the taskbar looks normal, there is no point in using this method.
Soundbar
Keyboard drivers are not always installed correctly. In this case, using "Fn" and the increase key will not give the desired result. Alternatively, you can use a soundbar. Its shortcut in the form of a white speaker is located in the lower right corner of the monitor screen. Click on it with the right mouse button. In the list that opens, select “Mixer”. Next, in the mixer panel, raise the overall volume slider up. After this, we must check for the presence of a sound signal. Another function that this system utility performs is improving the sound on a laptop through an expanded set of parameters. To do this, just click on the logo at the top, and in the window that opens, set the required volume and signal gain levels. The problem of low sound on the laptop is solved in a similar way.
Reboot
After the necessary manipulations have been done with the keyboard and soundbar, and the sound still does not appear, you need to completely restart the mobile computer. To do this, perform the following sequence of actions:
- We go to “Start”, then to the triangle next to the button that says “Shut down”.
- In the list that opens, select “Reboot”.
- We are waiting for the end of this operation and performing testing according to the previously described method.
BIOS
Another possibility that there are problems with sound on the laptop is to disable the sound card in the BIOS. In this case, you need to log into the basic input/output system and perform the following steps:
- We turn on the completely switched off laptop.
- When the first image appears on the screen, find out how to enter the basic settings next to the text “Press X to Setup”. In this case, “X” is the information we are interested in. Press this key or their combination. Everything needs to be done promptly. If the manufacturer’s logo is displayed when starting the PC, you need to press “ESC” before this to hide it.
- In the BIOS go to the “Advanced” section.
- Next, use the cursor keys to find the item whose name contains the word “Audio”. It must be set to “enabled”. It can be set using either the "F5" and "F6" or "PgDn" and "PgUp" keys.
- Once the desired result is obtained, press “F10”. In response to the request, we save the changes made.
- After the reboot, we must carry out the testing procedure.
The reasons that could lead to the sound system turning off in this way could be the following: either someone made a joke on you or you have a virus on your computer.
Driver
At the final stage of recovery, we install the drivers. They allow you to install sound on your laptop and organize its output. The installation version of this software can be taken from the official website of the device manufacturer or found on the CD that is included with your mobile computer. We launch it and, following the instructions of the wizard, install the drivers. At the end, it is recommended to completely reboot the machine and only then test for sound.
Audio service
Another possible reason for the lack of sound on a laptop is that the audio service is not running. To launch it, perform the following manipulations:
- We go to “Start”.
- Open the “Control Panel”.
- Then you need to expand “Administration”.
- Go to the “Services” tab.
- Find “Windows Audio” and launch it.
After this, an icon in the form of a white speaker will appear in the lower right corner of the screen. If you wish, you can further implement sound amplification on your laptop. To do this, go to the mixer according to the previously described method and open the advanced settings. On the tab, check the box next to “Equalizer”. We make a single click on the button with three dots. Set all sliders in the new window to maximum and save the changes. But it makes sense to do this in cases where the speakers on your mobile computer are quiet.
Speakers or sound card?
All stages have been completed, but there is no result: there was still no sound. In this case, most likely, the problems are hidden in the hardware resources of the mobile personal computer. Now we need to find out what exactly is not working for us. To do this, we connect an external one to the green output of the laptop, for example headphones, and carry out testing using the previously described method. If sound appears, then the speakers are faulty. Otherwise, you have problems with your sound card. A natural question arises: “How to restore sound on a laptop in each of these cases?” The first one is very simple. We take the laptop to a service center, where they will replace the inoperative speakers. But in the event of a sound card failure, everything is much more complicated. It cannot be removed from the main PC board. The only solution in this case is to use speakers or speakers that are connected via a USB interface.
Results
As part of this material, a step-by-step guide was provided on how to turn on sound on a laptop. By following all the recommendations, in most cases you can restore the functionality of the speaker system of your mobile computer. The exception in this case is the failure of the sound card or speakers. But even with such a complex breakdown of a computer, possible solutions to this problem are proposed.
Sometimes the audio level in a file is low and the volume may not be sufficient for comfortable listening. The volume may be low only on headphones or only when playing through the internal speakers. In any case, if there is a need to raise the volume to a comfortable level, how can this be done? In all of the above cases, it is assumed that the audio equipment of the laptop is in full working order.
The first thing you need to do to increase the volume on a laptop is check the volume level via the tray icon. Through this icon you can open additional items in the “audio” section if you click on the speaker picture at the top and check all the settings, especially in the “levels” item.
Second. Through the control panel, find the “sound” section, there we find the properties of our playback device. In the “additional features” section in paragraph "Volume Leveling" check the box and check the volume level on the desired file.
Third . Connect external speakers with a built-in amplifier (as for a computer).
Fourth. Install audio codecs from the K-Lite-Codec package, this package can be easily downloaded from the official website and just run the exe file. Along with the codecs will be installed and Media Player Classic. Run the file with quiet sound on Media Player Classic and see the section Play → Filter → ffdshow audio decoder. And here we find the item (on the left) Volume and you need to left-click on it. Then a window with a volume control will open, adjust the volume as you need.
How to adjust sound on a laptop using a player. In Media Player Classic, you can right-click on areas of the video being played and select audio. There will be an options item, and move the “boost” control to the desired level.
Fifth. You can try opening the mixer in the volume settings from the tray. There, select speakers → enhancements → equalizer and when the equalizer opens, move the sliders up and save this position as a setting. But sometimes in equalizer menu It is not possible to adjust frequencies, but you can only select preset settings.
Sixth. As in step five, go to the improvement settings and check the boxes points equalizer, virtual sound and loudness compensation. This may increase the sound.
Seventh. As in point five, go to speaker sound enhancements and check the box only for point loudspeaker(the rest are empty), and mark on top "disable all sound effects". Then click “apply” and “ok”.
Eighth. Try to deliver VLC player and turn on the desired file on it and increase the volume through the settings.
Ninth. We use a program to increase the volume on a laptop. Install Letasoft Sound Booster, which will increase the volume 5 times on any applications, including players. Unlike VLC and Media Player Classic, which control the volume of only the files played on them.
Keep in mind that too much volume may damage the built-in speakers. First, interference will appear in the form of rattling, and then the built-in speakers will stop working completely.
The laptop is designed for user convenience - so that you can use your personal computer at any time, even when you are away from home. Every year laptops become more and more compact, but often this removes some of the buttons from the keyboard, which can confuse an inexperienced user even when performing the simplest actions. For example, when you try to turn up the volume.
In some laptop models, the volume up and down buttons are located directly on the keyboard - they are indicated by the letters “Vol” and the signs “+” and “-”. By clicking on the plus, you can simultaneously turn on and amplify the sound. But this is more typical for laptops of fairly old generations. A similar button may also be present on the edge of the bottom of the laptop, next to the slots for memory cards and flash drives. If your laptop does not have volume up and down buttons, you can turn on the volume using the mouse or touchscreen. In the lower right corner of the screen you can see the volume icon - speaker. If the sound is muted, there will be a red X on it. Click on the speaker and in the tab that appears, increase the volume. You can also change the mixer settings.
Loss of sound on a laptop does not necessarily mean it is broken. First, try to remember exactly when the sound disappeared, after what manipulations, what applications were open at that moment. Sometimes it is enough to check all systems and detect failures or changes in settings yourself.