Setting up a zte f660 mgts router: step by step instructions. How to enter the admin panel of the router from Rostelecom Router zte standard password
ZTE F660 is a router that uses GPON technology to connect to the Internet. In addition to the standard Internet distribution functions for devices connected to the router via a cable or via Wi-Fi, the ZTE router is able to provide its owners with IP telephony and provides the ability to create local WEB servers.
What distinguishes ZTE F660 from other routers purchased for home use is the advanced development of xPON communication. Another important feature of the router is that the device is multifunctional. In addition to the standard four PJ-45 ports and the ability to connect clients via Wi-Fi, the device has the ability to connect USB 2.0 electronic media and devices via .
Characteristics and features of the device
- Operating frequency - 2.4 GHz
- Data transfer over Wi-Fi operates at a speed of 300 Mbps
- Implemented technical support for 4 SSIDs with a one-time connection of 128 users to each network
- Support WPS mode to increase the WiFi coverage of other switches.
On the back of the router are:
- Control buttons for WLAN and WPS functions
- One port for connecting USB devices
- POTS connectors (2 pcs.)
- Ports for LAN connection (4 pcs.)
- To reset the optical modem ONT ZTE ZXHN F660 to factory settings, there is a RESET button on the back side, located in the recess of the case.
- Connector for the power supply unit from the mains of the device.
- Button to turn on and off
How to connect a router
After installing and turning on the router, you need to configure this equipment for full use.
- Connect the fiber optic cable to the outlet and to the router socket.
- Connect the LAN cable to the network card of the computer or laptop. Connect the other end of the cable to any LAN connector on the router's router.
- Check that the LAN activity indicator is on.
After setting up a wired connection, you need to set up access via Wi-Fi.
Step-by-step configuration of the MGTS GPON ZTE F660 router
- in the address bar of the browser, type ip address "http://192.168.0.1
- on the router configuration page, enter: login - "admin", password - "admin".
- If services for the provision of a router are carried out using the MGTS provider, try entering “mgts” in the login line and “mtsoao” in the password line.
- After identification, in the window that opens, you can see the technical characteristics of the router: model, serial number, firmware version, device chip version, and the password of the router.
- To connect wireless access via Wi-Fi, you need to go to the "Network" tab located at the top. Next, open the "WLAN" submenu on the left side of the window, and find the "Basic" subsection.
- In the first column "Wireless RF Mode" set the value to "Enabled"
- In the "mode" line, select "Mixed (802.11b)"
- Region – Russia
- Line "Chanel" - mode "Auto".
- In "Transmitting power" select "100%".
- Press the button to save the entered settings - "Submit".
- Next, open the "Multi-SSID Settings" submenu (Fig. 3)
- In the line "SSID Name" you need to come up with and enter the name of the network, then click the "Submit" button.
- Open the "Security" submenu and paste the following values:
- Enter the previously created password in the "WPA Passphrase" line, which will be the network key. To ensure network security and avoid unauthorized access, the password must contain at least 8-10 characters of the Latin alphabet, it is desirable to use both upper and lower case characters, as well as numbers.
- To save, click on the "Submit" button.
If all these steps are performed correctly, and the device is in working order, you can connect various devices to Wi-Fi access.
If you decide to reset your router to factory settings, you need to reset the user settings as follows:
- With the router turned on, you must hold down the reset button "Reset" for 30 seconds
- While continuing to hold the button, turn off the mains power, and hold the button for another 30 seconds.
- Reconnect the device to the network, and hold the button pressed for another 30 seconds.
If everything is done correctly, the router should return to factory settings.
How to download and install firmware on the router
If errors appear on the router, for example, with regular Wi-Fi outages, for no apparent reason, the router can be reflashed. But this is done at your own peril and risk, as this will void the factory warranty. According to the MGTS agreement, the router belongs to the provider company, and not to the user. And in case of unsuccessful firmware, the user will have to pay the cost of the router.
In order to flash the router, you need to download the official version from the website of the ZTE equipment manufacturer, or contact
Setting up a WiFi router ZXV10 H208L and ZTE ZXHN H208N. Detailed instructions for setting up the Router mode and creating a wireless WiFi network.
The ZXV10 H208L (ZTE ZXHN H208N) device combines the functions of an ADSL modem, wifi access point, SIP telephony client, and a router at the same time. The modem has one external port - WAN (Wide Area Network) and four internal - LAN (Local Area Network). WAN is used to connect a network internet cable to a modem. LAN ports provide connection of various devices (PCs, laptops) to the internal network. The modem is configured via the Web interface. To access it, you need a browser, such as Google Chrome.
Customization features
We can configure it as follows: in Bridge mode (the Internet will be connected to only one computer), in Router mode, or to open ports.
In Router mode, the Internet connection is made directly through the modem. The advantage of the modem in this mode is the possibility of simultaneous use of the Internet by various devices (tablet, smartphone, PC, etc.). To set up wifi, you must first set up the Router mode.
Setting up wifi on byfly modems, in most cases, is a simple process that does not require special knowledge and skills. Please note that before setting up wifi on byfly modems, you should perform the following operations.
- You need to install your modem model (ZXV10 H208L or ZTE ZXHN H208N).
- Check if the modem is connected to a personal computer or laptop via a network cable.
- Make sure you have a working connection when connecting to the Internet with a network cable.
- Set up wifi on the byfly modem according to the instructions.
Setting to Router mode
The ZXV10 H208L device (ZTE ZXHN H208N) is initially in Bridge mode, that is, there is access to the Internet from only one PC, to switch to Router, you must follow the instructions below.
Setting up the ZTE ZXHN H208N modem. Setup of the ZTE ZXHN H208N modem
Setting modem ZTE ZXHN H208N router, setting WiFi, IPTV Setup of the ZTE ZXHN H208N modem in a router, the
Setting up a wi-fi router zte zxhn h108n, internet, wi-fi, interactive TV, multiroom
Detailed description of DSL wi-fi ZTE router zxhn h108n, setting by master and manually Internet, interactive TV, wi-fi
Launch a browser, preferably Internet Explorer, enter the router settings - 192.168.1.1
Read also
How to set up Xiaomi phone: Redmi, Note 4 not others. Only basic optionsNewsRead a detailed annotation for useful tips on how to set up your Xiaomi phone. Web, WiFi, language is not a fingerprint sensor. The answer is not simple in one article. Everyone knows ...
How to check the authenticity of Samsung a50 smartphone Along with the high technology associated with the new Samsung A50 phone model, people tend to think that they can get the same features at a much lower price.Due to the lack of awareness...
Sometimes you are very annoyingly called or sent messages by a subscriber who does not want to hear, in other words, it's just spam and similar unwanted contacts. In order to prevent this, it is enough to block them to permanently get rid of this...
Dropped iPhone. the screen does not work If you dropped your iPhone, the screen does not work, first you need to calm down. The consequences of a fall can be severe, but there are effective ways to fix a malfunction in your phone alone.
How to install Russian language on a HUAWEI (honor) smartphone?. Most smartphones in the world are developed and assembled outside of Russia. Therefore, the main language of the smartphone interface is also not Russian. Usually, when you turn on your smartphone for the first time, you will be prompted ...
Open a browser, enter http://192.168.1.1 in the address bar
A new tab will open. Set the Username field to admin, and the Password field to admin. Click the "Login" button.
Navigate to the Network Interface/Network menu.
Next, fill in the Connection name, you must select the PVC0 option, and if it is absent, Byfly.
The bridge connection needs to be removed. To do this, click on the "Delete" button.
A new tab will appear. Enter the name of your connection in the New Connection Name field, for example, PVC0. Next, go to the VPI / VCI field, where you should enter 0/33. Enter the information from your contract in the appropriate Username and Password fields, click the "Create" button.
If there is no Internet connection, it is worth checking the correctness of the Username and Password information.
WiFi setup
To configure Wi-Fi on a ZXV10 H208L or ZTE ZXHN H208N device, you must press and hold the "Wlan" button for about 20 seconds, after which the corresponding indicator should flash. We enter the settings of the router as indicated above.
Go to the Network Interface tab.
Read also
How to change SmartHub region for Samsung KPosted 08.02.2017 by andreyHow to change SmartHub region for Samsung K Preparatory TV setup Replacing the IP address Installing (unlocking) Samsung smarthub From the off state ...
This 60% Wi-Fi Water Leak Detector only does the basics, but it does them well. There was an error emailing this page.
How to connect your phone to a computer via usb: Solutions to the problem How to connect your phone to a computer via usb if it does not connect for removable media, but only charges? A very common problem for users who use...
Oppo is launching its new smartphone called Oppo A31. This device comes with many new features and modern technologies. Recently, 91mobiles posted a poster featuring an Oppo A31 designed for a triple rear camera setup...
Question: How to set up the Internet on smartphones (phones) and tablets ZTE?
Answer: Internet setup on ZTE devices is performed in the following order.
1. We connect the service with the operator. This can usually be done via a USSD request.
To connect to the Internet from Megafon, we recommend that you follow the link - http://www.megafon.ru/internet/, select the type of device to connect, for example - "For a smartphone", select your region, then select a tariff, click "Buy", after what information will appear, what code you need to dial to connect the service, for example - *236*0#. We dial this code like a regular phone number.
To connect the Internet from MTS, we recommend that you follow the link - http://www.mts.ru/mobil_inet_and_tv/, select the type of device to connect, for example - "Internet from phone", after which a page will open with a code that you need to dial to connect services, for example - *252#.
To connect to the Internet from Beeline, we recommend that you follow the link - http://beeline.ru/customers/products/mobile/, select the type of device to connect, for example - "On the phone", then select a tariff plan, then click on "Connect" -> "Connecting and managing the service" after which you can see information on how to connect the service, for example, by dialing the code - *115*04# or by calling the number.
Attention! Page addresses and USSD request codes are for example only and may change over time! To connect, go to the main page of your mobile operator's website and from the main page go to the pages with information about connecting to the Internet. For other operators, the setting will be approximately the same. You can also call your mobile operator to the hotline and activate the service verbally. Another option is to come to any operator’s sales office in your city, where sellers must activate the service.
2. To turn on the Internet, you need to go to "Settings" -> "Data transfer" and opposite the item "Mob. traffic" or check the enable checkbox, or move the switch to the right to "On". For most ZTE smartphones, this is enough to automatically turn on mobile Internet. After the connection is established, depending on the type of connection, in the notification panel, next to the network signal strength icon, the symbol H (HSDPA), G (GPRS), E (Edge), R (Roaming) or 3G will appear. Also, to check the Internet connection, open the browser and wait for any web page to load, for example, by typing “ya.ru” (light version of Yandex) in the address bar.
Attention! If the ZTE smartphone is 2-SIM, then the SIM card that will be used to access the Internet must be inserted into the WCDMA / GSM connector, and in the settings "Settings" -> "More" -> "Mobile network" -> "Network SIM1″ settings (or 2 depending on the model, see the slot number under the cover) -> "Network mode" -> "Preferred network mode" -> "GSM / WCDMA" or only "WCDMA".
 |
3. If the Internet does not appear on your ZTE device after following the previous recommendations, then you must either receive the Internet settings from your mobile operator in automatic mode, or enter the settings manually.
Automatic setting
If the operator is Megafon, then go to the site - megafon.ru, click on the link "Support" -> "Settings", select "ZTE" there, and then your smartphone model, for example - "V880E" and enter your phone number. After that, the settings should come to your device.
If the operator is MTS, then go to the site mts.ru, then "Mobile Internet and TV" -> "Help and Service" -> "Settings" -> "Phone Settings". There we enter the number and wait for the settings to be received.
If the operator is Beeline, then the automatic setting of mobile Internet is ordered by a free call to 0880. (The password for saving settings is 1234.)
Manual setting
If the operator is Megafon, then go to http://labs.megafon.ru/dev/, there we select "Other manufacturers" -> "ZTE", we are looking for our device, for example "ZTE Nubia Z5", well, we are trying to set it up like this, as it is written there.
If the Beeline operator, then go to the site beeline.ru, there click on the link "Help and support" -> "Internet settings" in the search field, enter the model of your device, for example - ZTE V790 and then click "Find instructions" and read the information on at the construction site. You can also send instructions directly to your phone by selecting the link "Send SMS with instructions for ZTE V790".
If the operator is MTS, then go to the site mts.ru, then "Mobile Internet and TV" -> "Help and Service" -> "Settings" -> "Phone Settings" -> "Internet" -> "Android", read the instructions .
General rules for manual configuration
Go to "Settings" -> "More" -> "Mobile network". If 2 Sim-cards are used, then select the settings of the Sim-card for which the Internet is activated. Next, click on the item "APN access points" -> "New access point" and enter the settings that are indicated on the website of your mobile operator. After entering the settings, save the access point, reboot the device and rejoice.
 |
 |
 |
In most cases, the following settings will suffice.