Philips Xenium W8500 firmware. Secret codes for Philips Xenium W8500. PHILIPS XENIUM W8500 firmware video

Philips Xenium W8500. Works under the operating system Android 4.1.. Its productivity is estimated at 0 out of 5 (in its segment). This smartphone - needs additional evaluation. Here are the characteristics of the device, instructions, how to make a reset settings, flash the device and, of course, how to get root rights to PHILIGIPS

Root on Philips Xenium W8500

How to get a root for Philips Xenium W8500 See the instructions below.

If applications did not help - ask in the subject or use the full list of root utilities from the topic header.

Characteristics

  1. Standard: GSM 900/1800/1900, 3G
  2. Type: Smartphone
  3. Operating system: Android 4.1
  4. Case type: Classic
  5. Case material: plastic
  6. Design: water refractory
  7. SAR level: 0.36
  8. Number of SIM-Cards: 2
  9. Mode of operation of several SIM cards: alternated
  10. Weight: 172 g
  11. Sizes (shXVXT): 71x132x12.3 mm
  12. Screen Type: Color TFT, 16.78 million colors, Touch
  13. Diagonal: 4.3 inches.
  14. Image Size: 540x960
  15. The number of pixels per inch (PPI): 275
  16. Scratch-resistant glass: yes
  17. Type of melodies: 64-voice polyphony, MP3 melodies
  18. Vibrating alert: Yes
  19. Camera: 8 million pix., 3264x2448, Built-in flash
  20. Camera Functions: Autofocus
  21. Recording video: yes (mpeg4)
  22. Max. Video frame frequency: 30 frames / s
  23. Front camera: yes
  24. Video playback: MPEG4, H.263, 3GP, H.264, DivX
  25. Audio: MP3, AAC, WAV, FM Radio
  26. Dictaphone: Yes
  27. Headphone jack: 3.5 mm
  28. Interfaces: USB, Wi-Fi, Bluetooth 3.0
  29. Satellite navigation: GPS
  30. A-GPS System: Yes
  31. Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, Email Pop / SMTP, HTML
  32. Processor: 1200 MHz
  33. Number of processor cores: 2
  34. Volume of built-in memory: 4 GB
  35. Volume accessible memory user: 2 GB
  36. Memory Card Support: MicroSD (Transflash), up to 32 GB
  37. MMS: Yes
  38. Battery Type: Li-Ion
  39. Battery capacity: 2400 mAh
  40. Talk time: 8 h
  41. Flight Mode: Yes
  42. A2DP profile: yes
  43. Organizer: Alarm Clock, Calculator, Task Scheduler
  44. Complete set: telephone, charger, USB data cable
  45. Features: IP67 Standard Protection

ยป

Firmware for Philips Xenium W8500

Official firmware Android 4.1 [Stock ROM file] -
PHILIPS Custom Firmware -

If the custom or official firmware on the PHILIPS has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free help. With backup and manuals. Just do not forget to write and reviews your smartphone - it is extremely important. This page will also appear firmware on Philips Xenium W8500. Note that for this model, the PHILIPS requires an individual ROM file, so you should not try firmware files from other devices.

What are the Castom Firmware (Firmware)?

  1. CM - Cyanogenmod.
  2. Lineageos.
  3. Paranoid Android
  4. Omnirom
  5. Temasek's.
  1. AICP (Android Ice Cold Project)
  2. RR (Resurrection Remix)
  3. MK (Mokee)
  4. Flymeos.
  5. Bliss.
  6. crdroid
  7. Illusion Roms.
  8. Pacman ROM.

Problems and disadvantages of smartphone from philips and how to fix them?

  • If Xenium W8500 does not turn on, for example, you see a white screen, hanging on a screensaver or only flashing indicator flashes (perhaps after charging).
  • If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
  • Not charging (usually, problems with iron)
  • Does not see the SIM card (SIM)
  • Camera does not work (for greater extent, hardware problems)
  • Sensor does not work (depends on the situation)
For all these issues, please contact (you just need to create a topic), the specialists will help free.

Hard Reset for Philips Xenium W8500

Instructions, how to make Hard Reset on Philips Xenium W8500 (resetting settings). We recommend to get acquainted with the visual guide, which is called on Android. .


Codes for resetting settings (open the dialer and enter them).

  1. *2767*3855#
  2. *#*#7780#*#*
  3. *#*#7378423#*#*

Hard Reset via Recovery

  1. Turn off the device-\u003e Go to Recovery
  2. "WIPE DATA / FACTORY RESET"
  3. "Yes - Delete All User Data" -\u003e "Reboot System"

How to go to Recovery?

  1. hold and hold the Vol (-) [volume down], or VOL (+) [Volume Up] and the power button (POWER)
  2. the menu will appear with Android. Everything, you in Recovery!

Reset settings on Philips Xenium W8500 can be done in a completely simple way:

  1. Settings-\u003e Recovery and Reset
  2. Reset settings (at the bottom)

How to reset the graphic key

How to reset the graphic key if you forgot it, and now you cannot unlock your Philips smartphone. On the Xenium W8500 model, the key or PIN code can be removed in several ways. You can remove the lock and via resetting the settings, the blocking code will be deleted and disabled.

  1. Reset graph. Locks -
  2. Password reset -

This page contains information about the mobile device. Here you can download the latest firmware android on Philips Xenium W8500.and also be able to find out how to get root rights.

Read more about root rights you can. Instructions for getting below.

In which cases you need to update the firmware

  • I want to install a new firmware to expand the capabilities of the smartphone;
  • Need restoration after unsuccessful firmware
  • The device is constantly rebooted without a cause;
  • The device does not turn on.

What firmware we have

In order to download Android 5.1 Lollipop firmware, 6.0 Marshmallow., 7.0 Nougat., Android 8.0 O. For Philips Xenium W8500, read the article completely - it is very important. Having installed the latest available version of Android, you will be surprised by the opportunities that have appeared. And you can also find the official version of the miui firmware of different versions and custom original firmware.

If you have questions you can always set them through the comment form.

Availability of firmware: in stock.

Download firmware

Having written a review through the comment system, specify this email if you have problems with installing the firmware. Please take into account that we provide free consultations, so we can respond with the delay. In addition to the administration, you can answer and help ordinary users, everything is like on the forum.

Instructions for installing firmware is based on the links below. Downloading the firmware for Philips Xenium W8500 is available via torrent with instructions.

Firmware Installation Instructions

To download, select the firmware you need and click on the link.

To install do the following:

  • Download a file with firmware and a special program.
  • Run the program on your computer
  • Select the desired firmware version
  • Strictly follow all instructions from the archive

PHILIPS XENIUM W8500 firmware video


* # 7728 * # - RSAV Done
* # 3849 * # - ??? reboot
* # 3851 * # - ??? reboot

Shows IMEI
Shows the Secret Code of the apparatus
View SIM card information
Information about blocking SIM card, init and flags. Sometimes it is extremely useful.
Activates and deactivates SLEEP MODE (sleep mode)
View Sleep Mode information
Opening a new partition in the user menu "Closed User Group"
Disables and turn the battery charging when the phone is connected to the charger
Disabling time check and date
Includes and turns off "Debug Call Mode" (if you call a busy line, some hexadecimal apparatus codes appear on the display.)

* # 2337 * # activates a beep if the phone is reinforced to the network.

Reset on Philips.

# 20021208 # OK - 630 WITHOUT SIM (Erase Flash)
* # 7728 * # - RSAV Done
* # 3849 * # - ??? reboot
* # 3851 * # - ??? reboot
Philips 568 * 01763 * 737381 # - RESET

Android Secret codes for Philips Xenium W8500

Disclaimer: This information is intended for experienced users. It is not intended for simple users, hackers or mobile thieves. We will not be responsible for using or incorrect use of this information, including data loss or equipment damage. So use these codes at your own risk and benefit.

Code: - * # * # 4636 # * # *
This code can be used to obtain information about your phone and battery. The following 4 menus are displayed on the screen:

* Phone information
* Battery Information
* Battery history
* Use statistics

Code: - * # * # 7780 # * # *
This code can be used to reset the factory settings. He will delete the following things:

* Google account settings that are stored in your phone
* System and Application and Settings
* Uploaded applications

It will not be deleted:

* Current System Software and Related Applications
* SD card files, such as photos, music files, etc.

PS: After you enter this code, you will see a window with a proposal to click the "Reset Phone" button. Thus, you get the opportunity to cancel your operation.

Code: - * 2767 * 3855 #
Think before entering this code. This code is used for factory reset. It will delete all files and settings, including internal memory. Also reinstall the phone firmware.

PS: After you enter this code, you will not be able to cancel the operation until you pull the battery from the phone. So think twice before entering this code.

Code: - * # * # 34971539 # * # *
This code is used to obtain information about the phone chamber. Shows the following 4 menus:

* Updating camera firmware in the image (do not touch this option)
* Camera firmware update on SD card
* Get the camera firmware
* Get Firmware Update Counter
A WARNING. Never use the first option, otherwise the camera of your phone will stop working, and you will need to take the phone to the service center to reinstall the camera firmware.

Code: - * # * # 7594 # * # *
This code can be used to change the "Complete Call / Power" button on your phone. By default, if you click a button for a long time, a request screen will appear asking any option from silent mode, flight mode and power off. You can enable direct shutdown by pressing this button so as not to spend time to choose from.

Code: - * # * # 273283 * 255 * 663282 * # * # *
This code opens the file copying screen where you can back up your media files, for example: photos, audio, video and voice memos.

Code: - * # * # 197328640 # * # *
This code can be used to log in to the service mode. You can run different tests and change the settings in the service mode.

WLAN, GPS and Bluetooth Test Codes:
# * # * # * # * # * # 528 # * # * - WLAN TEST (use the "Menu" button to start various tests)

* # * # 232338 # * # * - Shows WiFi Mac Address The MAC address is a unique code assigned by the manufacturer to a network device (for example, a wireless network adapter or an Ethernet adapter). Mac is a reduction from Media Access Control. It is assumed that each code is unique to a specific device.

* # * # 1472365 # * - GPS Test Philips Xenium W8500

* # * # 1575 # * # * - Another GPS Test GPS (Reduction from Global Positioning System, from English - Global Positioning System) - Satellite Navigation System used to determine the geographical location of objects and the speed of their movement. The system was initially developed by the US Department of Defense for military purposes, but over time began to be applied in purely peaceful purposes. GPS is widely applied by transport services and special popularity has received motorists. When using special electronic cards, GPS allows you to very accurately track the position of the machine and simplifies the choice of movement routes by unfamiliar area.

* # * # 232331 # * - Bluetooth Test Philips Xenium W8500

# * # 232337 # * # - shows the address of the Bluetooth device

* # * # 8255 # * # * - This code can be used to launch GTalk Service Monitor.

Codes for information about the firmware version:
* # * # 4986 * 2650468 # * # * - PDA, Phone, H / w, RFCallDate

# * # 1234 # * - PDA and phone

* # * # 1111 # * - FTA SW VERSion

* # * # 2222 # * - FTA HW VERSion

* # * - PDA, Phone, CSC, Build Time, Changelist Number

Codes for launching various factory tests:

* # * # 0283 # * - Packet Loopback

* # * # * - LCD Test

* # * # * # * # 0289 # * - Melody test

* # * - Device Test (VIBRATION TEST AND BACKLIGHT TEST)

* # * # 2663 # * # * - Touchscreen version

# * # * # 2664 # * # * - Test screen test

* # * # 0588 # * - Proximity Sensor Test

* # * # 3264 # * - RAM VERSION PHILIPS XENIUM W8500

Standard GSM Philips Xenium W8500 codes
These codes dialed from the GSM standard are used to enable and disable various standard features and services. Some of them duplicate the menu functions, some are not.

Legend:
@ \u003d send button (tube, OK, YES, NAVI)
** \u003d enable or activate
* \u003d active
## \u003d Turn off and deactivate
# \u003d Inactive

Replacing PIN Code Philips Xenium W8500
Change PIN 1 ** 04 * OldPin1 * Newpin1 * Newpin1 # @
Change PIN 2 ** 042 * OldPin2 * Newpin2 * Newpin2 # @
Unlock PIN 1 ** 05 * PUK * NEPIN1 * NEWPIN1 # @
Unlock PIN 2 ** 052 * PUK2 * NEPIN2 * NEWPIN2 # @

PUK - Code, which must be provided by the operator when buying a phone or connection. In the absence of this code, or tenfold input of the wrong PUK, your phone will be completely blocked!

Show iMei Philips Xenium W8500
Show imei * # 06 # Translated from the English "IMEI" means: international mobile equipment identifier. " As the name follows, each device must have its own unique "IMEI", which will distinguish it from the rest. When you buy a new phone, you can notice "IMEI" on the box or even on the store receipts. If you ever incur a mobile phone for repair, that is, the chance that your IMEI will be celebrated in the service center for identification purposes.

If the code obtained by entering this command and the code on the back of the phone does not match, then your phone may be "gray".

Call Forward PHILIPS Xenium W8500
Deactivate all types of redirection ## 002 # @
Deactivate all conditional redirects ## 004 # @
Activate all conditional redirects ** 004 * The phone number # @

Forwarding all calls Philips Xenium W8500
Deactivate and disable call forwarding to another number ## 21 # @
Deactivate call forwarding to another number # 21 # @
Set number and activate call forwarding to another number ** 21 * telephone number # @
Activate call forwarding to another number * 21 # @
Check call forwarding status to another number * # 21 # @

Forwarding in the absence of a call to the call
Activate call forwarding to another number If the subscriber does not respond ** 61 * The phone number # @
Deactivate and disable call forwarding If the subscriber does not respond ## 61 # @
Deactivate call forwarding If the subscriber does not respond # 61 # @
Activate call forwarding If the subscriber does not respond * 61 # @
Check call forwarding status If the subscriber does not answer * # 61 # @

Forwarding if the subscriber is outside the coating zone
Activate call forwarding to another number If the subscriber is out of the coverage area ** 62 * The phone number # @
Activate call forwarding If the subscriber is outside the coverage area * 62 # @
Deactivate and disable call forwarding If the subscriber is outside the coverage area ## 62 # @
Deactivate call forwarding If the subscriber is outside the coverage area # 62 # @
Check forwarding status If the subscriber is outside the coverage area * # 62 # @

Forwarding if the phone is busy
Activate call forwarding to another number If the phone is busy ** 67 * The phone number # @
Activate automatic call forwarding if the phone is busy * 67 # @
Deactivate and disable call forwarding if the phone is busy ## 67 # @
Deactivate call forwarding if the phone is busy # 67 # @
Check the status of automatic redirection if the phone is busy * # 67 # @

Setting the number of beeps before activation of forwarding
N \u003d 5-30 (seconds)
Set the number of beeps ** 61 * Roomproofs ** N # @
Cancel the previous setting ## 61 # @


Change Password for Call Prohibit ** 03 * 330 * Avodarol * Name Parental * New parole # @
Activate the prohibition of all outgoing calls ** 33 * Password # @
Deactivate the prohibition of all outgoing calls # 33 * Password # @
Check the status of the prohibition of all outgoing calls * # 33 # @

Ban all calls Philips Xenium W8500
Activate the ban of all calls ** 330 * Password # @
Deactivate the ban of all calls # 330 * Password # @
Check the status ban all calls * # 330 * Password # @

Prohibition of all outgoing international calls Philips Xenium W8500
Activate the prohibition of all outgoing international calls ** 331 * Password # @
Deactivate the prohibition of all outgoing international calls # 331 * Password # @
Check the status of the ban of all outgoing international calls * # 331 # @

Prohibition of all outgoing calls Philips Xenium W8500
Activate the prohibition of all outgoing calls ** 333 * Password # @
Deactivate the prohibition of all outgoing calls # 333 * Password # @
Check the status of the ban of all outgoing calls * # 333 # @

Ban all incoming calls Philips Xenium W8500
Activate the prohibition of all incoming calls ** 35 * PW # @ or ** 353 * Password # @
Deactivate the ban of all incoming calls # 35 * PW # @ or ** 353 * Password # @
Check the status of the ban of all incoming calls * # 35 # @ or * # 353 # @

Prohibition of all incoming calls during roaming
Activate the prohibition of all incoming calls during roaming ** 351 * Password # @
Deactivate the ban of all incoming calls during roaming # 351 * password # @
Check the status of the ban of all incoming calls on roaming * # 351 # @
Activate Waiting for Call * 43 # @
Deactivate Waiting for Call # 43 ## @
Check the status of calling the call * # 43 # @

Package or ban sending your phone number when calling
Prohibit the parcel number of your phone # 30 # number_tephone @
Allow the parcel number of your phone * 30 #Tephone number @
Check the status of sending your phone number * # 30 #

Codes for sending / ban definition number for incoming calls
Disable display of caller numbers on your phone * 77 #
Allow displaying the caller numbers on your phone # 77 # @
Check the display status of the caller number on your phone * # 77 # @

Questions and Comments on Secret Codes for Philips Xenium W8500

Ask a question regarding PHILIPS Xenium W8500 Secret Codes