SCX 4824FN Additional Driver
Recently, the procedure for connecting peripheral devices to a computer has been much simplified. One of the steps of this manipulation is to load and install suitable drivers. In the article we will look at the methods of solving this problem for MFP Samsung SCX 4824FN
Before proceeding to perform the following actions, we recommend connecting the MFP to the computer and start the device: it is necessary to check the correct installation of the drivers.
Method 1: HP Web Resource
Many users in search of drivers to the device under consideration are visited by Samsung's official website, and are surprised when there are no mention of this device. The fact is that not so long ago, the Korean giant sold the production of printers and the MFP of the company Hewlett-Packard, so the drivers need to look exactly on the HP portal.
At the end of the download, start the installer and, following the prompts, set the software. No need to restart the computer.
Method 2: Third Party Driver Installers
The task of searching and installing suitable software can be simplified using a special program. Such a software can automatically determine the components and peripheral devices, after which it unloads the drivers to them from the database and sets into the system. The best representatives of this class of programs are considered in the article on the link below.
In the case of printers and MFPs, DriverPack Solution has proven its effectiveness. It's easy to work with him, but in case of difficulty, we have prepared a small instruction with which we advise you to get acquainted. 
Method 3: Equipment ID
Each component of the computer hardware has a unique identifier, with which you can quickly detect the desired software. SAMSUNG SCX 4824FN device ID looks like this:
USB \\ Vid_04e8 & Pid_342C & MI_00
This identifier can be entered on the Special Service page - for example, or, and already download the necessary drivers from there. With more detailed management, you can read the following material.
Method 4: Standard Windows
The last method of installing software for Samsung SCX 4824FN is to use windows system.
- Open "Start" and select "Devices and Printers", on the.
On the latest versions of Windows you will need to open "Control Panel" And already from there move to the specified item.
- In the Funds window click on item "Installing the Printer". In Windows 8 and above, this item is called "Add printer".
- Select the option "Add Local Printer".
- The port should not be changed, so just click "Further" to continue.
- A tool will open "Printer Driver Settings". In the list "Manufacturer" Click by "Samsung", and in the menu "Printers" Select the desired device, then click "Further".
- Set the printer name and click "Further".
The tool will independently detect and install the selected software, on what the use of this solution can be considered finished.
As you can see, install the driver for the MFP under consideration very simply.
Order manual download and update:
This embedded Samsung SCX-4824FN driver must enter the Windows® operating system or be available for download via Windows® update center (Windows® UPDATE). The built-in driver supports the basic functions of your Samsung SCX-4824FN equipment.The procedure for performing automatic download and update:
Recommendation: For novice Windows users, it is recommended to update the Samsung drivers a laser multifunctional device printer using a utility to update DriverDoc drivers. DriverDoc makes it easier to update the SCX-4824FN drivers by performing them to automatically download and update.
In addition, when using DriverDoc to update the drivers a laser multifunction printer, you can also update all other drivers on your PC using our extensive base containing more than 2,50,000 drivers (replenished daily) for any hardware devices.
Install Optional Products - DriverDoc (Solvusoft) | | | |
Samsung Frequently Asked Questions regarding the update
Why do you need SAMSUNG device drivers Laser multifunction printer?
Device drivers, for example, SAMSUNG designed specifically for SCX-4824FN, promote the proper interaction of the Laser Multi Function Printer and the operating system.
What operating systems are compatible with SCX-4824FN drivers?
Windows has a valid driver for SCX-4824FN.
How to update SCX-4824FN drivers?
Two main ways to update SCX-4824FN drivers - manually using device manager or automatically using software to update drivers.
What are the advantages and risks of SCX-4824FN drivers update?
Upgrading Drivers Laser Multifunctional Printer will improve PC performance, unlock hardware functions and eliminate any incompatibility. The risks of installing incorrect SCX-4824FN drivers include software failures, loss of functions, pc hangs and system instability.
About the author: Jay Geater is the president and general director of Solvusoft Corporation - a global company engaged in software and focus on innovative service programs. He all his life passionately was fond of computers and loves everything connected with computers, software and new technologies.
The maximum resolution depends on various factors, including from the speed of the computer, free space on the disk, memory, the size of the scanned image and the specified scanning bit. Therefore, some permission values \u200b\u200b(especially the highest) may not be available at certain characteristics of the system and the scanned image.
Basic scanning operations
You can scan the originals using a USB cable or via the network.
Samsung Scan Manager: You can simply scan the originals using the control panel of this device, after which the scanned data will be saved in the My Documents of the connected computer. If the installation process is completed, the Samsung Scan Manager program is already installed on your computer. This feature can be used via a local or network connection.
TWAIN: TWAIN is an application for processing images by default. When scanning an image, the selected application starts, which allows you to control the scanning process. This feature can be used via a local or network connection.
Samsung Smarthru Office: This software extends the device capabilities. This program can be used to scan images or documents on a local or network connection.
WIA: WIA means Windows Images Acquisition (Image Downloads). To use this function, the computer must be connected directly to the device using a USB cable.
El. Mail: The scanned image can be sent as an attachment to an email.
Scanning with the control panel
This device allows you to scan documents from the control panel and easily send them to the My Documents of the Connected Computer folder. To use this function, the computer and device must be connected using a USB cable or via the network.
In addition, the Samsung Scan Manager program allows you to open scanned documents using another pre-installed program. Programs such as Microsoft Paint, Email, Smarthru Office, OCR can be added to the application.
Image scan results can be saved in BMP, JPEG, TIFF and PDF format files.
Scan to the app
1. Check that the device and computer are properly connected to each other and are included.
In the top of the display, the inscription will be ready for scan.
4. Press the left / right arrow until the scan appears on the bottom line of the display. On PC, then click OK.
5. Press the left / right arrow until the desired parameter value appears on the display, then click OK.
6. Depending on the connection port, the message text may differ. Read these messages and go to the next step.
Appoint. Scan: connected via USB. Go to step 7.
ID: connected via the network and the user is registered. Go to step 6.
And local PCs\u003e: Select a USB port or network for scanning. If the device is connected via the USB port, go to step 5. If the device is connected via the network, go to step 6.
Not available: Not connected via USB, nor through the network. Check the connection to ports.
7. Press the left / right arrow until the desired port appears on the display.
8. Enter the registered user ID and PIN, then press OK.
The identifier is the same username (ID), which is registered for Samsung scanning manager.
PIN is a four-digit number registered for Samsung Scanning Manager.
9. Being in the destination point., Press the left / right arrow until the desired software application appears on the display, then click OK.
By default, the value of my documents is set.
To add or delete a folder to save scan results, add or delete the application using the Samsung Scanning Manager\u003e Scan Settings.
10. To scan with standard settings, press Start. Press the left / right arrow until the desired parameter value appears, then click OK.
11. The scanning process will begin.
The scanned image is saved in the computer folder My documents\u003e My drawings\u003e Samsung. To quickly scan in the Samsung Scan Manager, you can use the TWAIN driver.
You can also scan using the following Windows menu items: Start\u003e Control Panel\u003e Samsung Scanning Manager\u003e Quick Scanning.
Setting the scan settings in Samsung Scan Manager
You can view information about the SAMSUNG Scanning Manager and the status of the scan driver installed. You can also change the scan settings and add or delete folders in which scanned documents are saved when scanning to a computer, using the Samsung Scan Manager program.
The SCAN Manager program can only be used in Windows and Macintosh operating systems. If you use Macintosh.
1. Select Start\u003e Control Panel\u003e Samsung Scan Manager.
Samsung Scan Manager will display the Administration dialog box.
You can open the Samsung Scan Manager by clicking the SMART Panel icon directly on the Windows taskbar.
2. Select the desired device in the SAMSUNG Scan Manager program.
3. Click the Scan Settings button.
4. Scan settings Allows you to change the location of the saving and scan settings, add or delete applications and change file format.
You can change the scanning device using the Change Port Function (in Local or Network mode).
5. When the settings are completed, click OK.
Scanning through a network connection
If the device is connected to the network, and network settings are configured correctly, you can scan and send images over the network
Preparation for network scanning
Before using the network scan functions, you must configure the following parameters depending on the application where the image is sent:
To send scanning results by e-mail, you must register as an authorized user. Configure the SMTP server to scan with subsequent sending files by email.
User Authentication for Network Scanning
To send a scanned image by e-mail or network, you must register local or network authorized users using the Syncru Web Service service.
If users check are enabled, only authorized users specified in the local or server database will be able to send scanning data over the network (attachment to the e-mail message, over the network).
To use the authentication function during network scanning, you must register the settings of the local or network authentication using Syncru Web Service.
To test users, one of three modes can be selected: missing (default), network check and local check.
Register local authorized users
3. Select Local Authentication on the General tab of the web page settings for user authentication.
4. Click the Add button.
5. Select the index from 1 to 50 corresponding to the place of storage of the record.
6. Enter your name, authorization identification code, password, email address and phone number. Before you start scanning to send an e-mail, you must enter a registered user ID and password.
7. Click the Apply button.
Registration of network authorized users
1. Enter the device's IP address as an URL in the web browser and click the Go button to go to the device website.
2. Click the Device Settings button.
3. Select Network Authentication on the General Web Page Settings Web Page Authentication.
4. Click Apply and OK.
5. Select your preferred authentication type.
6. Set the values \u200b\u200bfor each function in accordance with the instructions below.
7. Click the Apply button.
Setting up an email account
To scan and send an image as an email attachment, you should configure network settings using the SynChru Web Service Web Service.
1. Enter the device's IP address as an URL in the web browser and click the Go button to go to the device website.
3. Select the IP address or node name.
4. Enter the IP address in decimal form with dividing points or as a node name.
5. Enter the server port number in the range from 1 to 65535. The default port number 25 is provided.
6. Check the checkbox next to the SMTP authentication required to enable authentication.
7. Enter the name for logging in and password for the SMTP server.
8. Click the Apply button.
If the POP3BEForesMTP authentication is used on the SMTP server, check the checkbox next to SMTP requires POP3 before SMTP authentication.
a. Enter the IP address in decimal form with dividing points or in the form of a node name.
b. Enter the server port number in the range from 1 to 65535. The default port 25 is used.
Scan to the Email Program
The scanned image can be sent by email as an attachment in the message. First you need to configure the email account in the SynChru Web Service web service.
Before scanning, configure the scan settings for the task.
1. Make sure the device is connected to the network.
2. Download the originals of the documents into the auto acceptor face up either place one original on the glass exposure glass down.
3. Click the Scan / Email button.
4. Press the left / right arrow until the scan appears on the bottom line of the display.: El. After, then click OK.
5. Enter the recipient's email address and click OK. If the address book is configured, you can extract the address from memory using the shortcut or quick or group input of email addresses.
6. To enter additional addresses, click OK when the inscription appears and repeat step 5.
To go to the next step, press the left / right arrow to select the inscription None, then click OK.
7. If a query appears on the display, whether the user wants to send a message to his own address, press the left / right arrow to select Yes or No, then click OK.
This query will not be displayed if the automatic sending function was turned on when setting up an email account.
8. Enter the e-mail message and click OK.
9. Press the left / right arrow until the desired file format appears on the display, then click OK or Start. The device will start scanning, and then send an email message.
10. When the request appears on the display, whether the user wants to complete the work session, press the left / right arrow to select Yes or No, then click OK.
11. Press Stop / Reset to return to readiness mode.
Changing parameters for each scan job
The device supports the following parameters that allow you to perform individual setting of scan jobs.
Scan size: Specify image size.
Original type: Specify the type of source document.
Resolution: Specify image resolution.
Color scan.: Specify color mode.
Scan format: Specifying the file format in which the image will be saved. If you specify a TIFF or PDF, you can select a multiple page scan mode. Depending on the scan type selected, this parameter may not be displayed.
To configure the parameters, before starting the scan job, follow these steps.
1. Click the Scan / Email button.
2. Press the Menu button until the Scan feature appears.
in the bottom line of the display, then click OK.
3. Press the left / right arrow until the desired scan type appears on the display, then click OK.
4. Press the left / right arrow until the desired scan parameter appears on the display, then click OK.
5. Press the left / right arrow until the desired parameters appear on the display, then click OK.
6. To configure other parameters, repeat steps 4 and 5.
7. Upon completion, click the Stop / Reset button to return to the readiness mode.
Changing the default scan settings
In order not to perform the individual setting of scan settings for each task, you can set the default scan settings for each task type.
1. Press the LC Scan / Email button.
2. Press the menu button until the setup appears. scan. In the bottom line of the display, then click OK.
3. Press the OK button when the test is appeared. silent ..
4. Press the left / right arrow until the desired scan type appears on the display, then click OK.
5. Press the left / right arrow until the desired scan parameter appears on the display, then click OK.
6. Press the left / right arrow until the desired parameters appear on the display, then click OK.
7. To change other parameters, repeat steps 5 and 6.
8. To change the default settings for other scanning types, press the Back button and repeat the procedure from step 4.
9. Press Stop / Reset to return to readiness mode.
Setting up address book
You can configure the address book with frequently used addresses using the Syncthru Web Service Web service and then easily and quickly enter the email addresses, specifying the cell numbers assigned to them in the address book.
Registration of cell numbers of quick entry email addresses
1. Enter the device's IP address as an URL in the web browser and click the Go button to go to the device website.
2. Press the device parameters and setting up email.
3. Click Personal Address Book and add.
4. Select the cell number and enter the username and the appropriate email address.
5. Click the Apply button.
You can also click the Import command and get the address book from the computer.
Configuring group addresses cell numbers
Enter the device's IP address as an URL in the web browser and click the Go button to go to the device website.
1. Press the device settings and setting up email.
2. Click the Group Address Book and add.
3. Select the group cell number and enter the name of the group at your discretion.
4. Select the rapid entry cell numbers of email addresses that will be included in this group.
5. Click the Apply button.
Using entries from address book
To extract the email address, use one of the following ways.
Numbers of the rapid email addresses
When you send an email message to specify the recipient's address, enter the cell number of the quick entry of the email address under which the desired address is stored.
To enter the cell number from one digit, press and hold the corresponding key on the numeric keypad. If the cell number is two- or three-digit, press the first digits buttons and hold the last digit button.
You can search for memory entries by selecting Address Book.
Group addresses cell numbers
To use the email group address, it is necessary to find it and extract from memory.
When the email message is sent to enter the destination address, click the Address Book button.
Search for entries in the address book
The device supports two ways to search for the address in memory. You can sequentially view the list in alphabetical order or search for the first spells of the name associated with the desired address.
Perform a sequential memory search
4. Click OK when the inscription appears.
5. Press the left / right arrow until the desired name and address appear on the display. The list can be scrolled up or down in alphabetical order.
Search on the first letter
1. If necessary, click the Scan / Email button.
2. Press the Address Book button until the search and send item appears. In the bottom line of the display, then click OK.
3. Press the left / right arrow until the desired category of cell numbers appears on the display, then click OK.
4. Press the left / right arrow. When the ID appears, click OK.
5. Enter the first few letters of the name and click OK.
6. Press the left / right arrow until the desired name appears on the display, then click OK.
Print address book
Address book settings can be checked by typing it as a list.
1. Press the menu button until the setup appears. Syst. In the bottom line of the display, then click OK.
2. Press the left / right arrow. When the report appears, click OK.
3. Press the left / right arrow. When the address book appears, click OK.
4. Press the left / right arrow. When email appears. Mail, click OK.
SAMSUNG SCX-4824FN
Windows 2000/2003 / 2008/2012 / XP / VISTA / 7/8 / 8.1 / 10 - Universal Driver
For users that are installed above the specified versions of Windows and you could not install the specified drivers below, you can use that it will help to install the desired driver.
Windows 2000/2003 / 2008 / XP / Vista / 7
Blossomy options: x32 / x64
Driver size: 71 MB
Windows 2000/2003 / 2008 / XP / Vista / 7 - Driver for Scanning
Blossomy options: x32 / x64
Driver size: 9 MB
How to install a driver in windows 10
When connecting any peripheral device, the driver is required to the computer - for the primary setting in the system. This is a simple procedure that will take no more than two minutes. Consider installing the driver on the example of the Samsung SCX-4824FN printer.
The system will require acknowledgment of actions, and after consent, the Welcome Wizard Welcome window will appear. Further, everything is simple - you need to follow the tips of the installer. In the first window you need to select the Russian language (or another of the drop-down list) and click the "Next" button.
In a new window, select the appropriate type of printer installation, in our case it is a "normal local printer installation". After checking the checkbox opposite this option, click on the "Next" button.
If the printer is not yet connected to a computer, the wizard will remind the message:
If all actions are configured correctly without violating their sequence, the installer will switch to the following window:
To complete the process of installing the driver, you need to click the "Done" button, after removing the checkbox from "Yes, I want to register", which, as a rule, is worth the default.