Download usb 3.0 controller drivers for laptop. Utility from Gigabyte
If you have USB 3.0 ports on your computer, then for them to work correctly you need to download USB 3.0 drivers for Windows 10. If you install regular USB 2.0 drivers, the new port will either not work at all or will work at low speed. Why would you pay for a new high-speed connector and then not use it? Therefore, take care of installing the necessary driver yourself. This page provides universal ASUS drivers. They are suitable for ASUS motherboards.
Do I need to download USB 3.0 drivers for Windows 10
While the USB 3.0 connector is not so popular and widespread, it is often installed together with USB 2.0 connectors. Often, users download only one driver for USB ports, believing that this will solve the problem. But this is misleading, since the driver for USB 3.0 and for the 2.0 port are 2 different drivers. And if your device has a version 3.0 port, then you definitely need to download the driver for the USB 3.0 port. This driver is needed for a number of reasons:- Responsible for the operation of the USB 3.0 port;
- Allows you to use the port at maximum speed;
- Responsible for the correct and stable operation of the port;
Like all drivers, drivers for USB 3.0 must be selected according to your hardware. Of course, all connectors look the same since they are standardized. But you should choose the driver according to who manufactured your mother card. Since the ports are attached specifically to it. In some cases, you need to choose a driver from a company different from the motherboard manufacturer. You can reliably find out which driver you need if you find out in Device Manager which controller you have installed.
This page presents USB 3.0 drivers for controllers from Asus. These controllers are the most popular and are often installed not only on devices from Asus, but also on devices from other manufacturers. If you know for sure that your port is not from this manufacturer, then this driver will not work for you. In this case, you need to download either another driver or a universal program for finding and installing drivers, for example
Good afternoon, dear readers and guests of the blog, I think many of you have encountered such a situation that when you try to install Windows 7 on a new laptop, which most often has a fresh chipset and version 3 USB ports, you may not see the disk where you can install the system, and the whole problem is in the seven distribution kit, since it does not have support for usb 3.0, today I will teach you and show you how to integrate usb 3.0 drivers into the windows 7 distribution kit.
And so we have outlined the problem, even though the modern Windows 10 operating system has been released, not everyone likes it, since there are a lot of glitches, I can only cite the latest ones:
- The sound does not work on a Windows 10 computer, the sound is half the problem, cameras or wifi modules are much more important
- black screen when turning on windows 10 laptop and this list can be continued for a very long time
As a result, many people remain on Windows 7 and want to use it on new technology. One of my friends purchased a laptop HP 15-ay043ur, 15.6", Intel Pentium N3710, 1.6 GHz, 4 GB, 128 GB SSD, Intel HD Graphics 405. It did not have an operating system, it was DOS. My friend prepared a bootable USB flash drive with Windows 7 with using the USB DVD Download Tool utility. Launches the seven installer and when you select the disk for installation, it sees the following.
No device drivers were found. Verify that the installation media contains the correct drivers and click OK.
As you can see, he does not see the USB 3.0 flash drive and the installation wizard cannot start, and it is logical that you either need to find a distribution with usb 3.0 drivers already added to Windows 7 or do it yourself, which is what we will do.
Integrating drivers into a Windows 7 image can be done using several methods, both using additional utilities and using the command line and its utilities; we will look at several options.
Not the easiest utility for flashing the necessary drivers, but the utility is very high quality and has a lot of functionality.
Download NTLite from the official website https://www.ntlite.com/download/
I immediately advise you to install only stable versions, I do not advise beta. Choose the NTLite version for your Windows 7 bit depth.
Carry out a simple installation of the NTLite utility, click next a couple of times. We launch it and select a free license, this will be enough for us.
Add drivers to a Windows 7 image using EZ Installer
I would like to note right away that the EZ Installer utility from ASUS is suitable for adding USB 3.0 drivers from Intel chipsets 8, 9, 100 series. The utility is simple and is designed to automatically add USB 3.0 drivers to your Windows 7 distribution. It is suitable for users who do not have much experience with Windows systems.
Let's immediately tell you how the asus ez installer works, you have an ISO image with Windows 7 and from it the utility will make you a new DVD or USB drive, to which it will add a USB driver. The ISO image must be mounted into the system, if you have WIndows 8.1 or 10, then you can do this by double-clicking on the ISO; if your host system version is 7 or lower, you will have to use daemot tools or alcohol 120.
I would like to note that in my practice there were cases that when using asus ez installer
how to use asus ez installer
Run xHCIWin7InstSln.exe, the ASUS EZ installer will open, you need to select either:
- Windows 7 disk for USB drive > to do this you need to insert a bootable USB flash drive with the seven distribution kit
- ISO disk image Windows 7 > you will need to mount the ISO image
We agree to the license agreement and click next.
As you can see. The utility was able to determine the mounted distribution in the D:\ drive, click next.
At this stage of the wizard, you need to specify the folder where the new ISO Image will be created and check the Compatibility Mode checkbox.
After some time, the integration of usb 3.0 into the Windows 7 distribution will be completed.
Now all you have to do is test the operation of ez installer in practice.
Add drivers to the Windows 7 image using USB 3.0 Creator Utility
Yes, Intel has its own utility for adding drivers to the Windows 7 distribution, since most of the chipsets in technology in Russia are based on them.
You can download USB 3.0 Creator Utility from the link https://downloadcenter.intel.com/download/25476/Windows-7-USB-3-0-Creator-Utility
You launch the utility, next to it is a folder with drivers, the utility only works with a bootable USB flash drive that already has a distribution kit, you won’t be able to insert an ISO.
As a result, USB 3.0 Creator Utility will integrate your drivers into the 7 distribution in about 15 minutes.
Add drivers to windows 7 image using USB Patcher
USB Patcher utility for integrating USB 3.0 drivers from Intel chipsets 8, 9, 100 series. The utility itself is very simple; when you launch it, you will have three options:
- Create a Windows 7 installation disk with a USB device > Creating a distribution kit on flash media
- Create a Windows 7 installation disk with a CD > create a boot disk
- Create a Windows 7 installation ISO feli for a CD > create an ISO with drivers
I choose the third option, for example, you have the right to use the one you need.
Despite the long-released Windows 8, 8.1, 10, quite a lot of users still prefer the good old “seven”. Windows 7 was released on October 22, 2009, but is still the most popular OS in the world. Unfortunately, its distribution may not include USB 3.0 drivers. Accordingly, it is impossible to install the operating system on a computer that does not have an optical disc drive. The only option is to install from a flash drive.
Description of the problem
A striking example is HP laptops from the 250 G5 series, which in the budget configuration do not have a DVD drive. Despite the aggressive marketing of Windows 10, HP still provided drivers on its official website not only for Windows 10, but also for Windows 7. Although when you try to install it, you may encounter the error: “Device drivers not found. Verify that the installation media contains the correct drivers and click OK."
The Windows 7 Setup Wizard does not start because the computer does not see the device connected via USB 3.0. And then there is a need to integrate USB version 3.0 drivers into the Windows 7 distribution, which is what we will do now.
You can embed drivers into the installation image either using the command line and its utilities, or by resorting to third-party programs specially made for this purpose.
Integrating the driver into the Windows 7 distribution using the NTLite program
You can find many videos and articles on the Internet that describe the procedure for installing drivers using the command line. But for the average user, the graphical interface is much simpler and clearer. The ability to read prompts and press familiar buttons is very attractive and does not frighten a person who has never embedded drivers into a ready-made Windows distribution.
First, you need to download the NTLite program from https://www.ntlite.com/download/, selecting the version for the bit size of your OS.
Then we run the downloaded file and carry out a simple installation. Accept the license agreement and click “Next”.
You can choose the installation location as you wish or leave it unchanged. “Next” again.
If you want to copy the folder from NTLite to a flash drive and carry it with you, then check the box “Portable mode (no uninstall support)” and, again, “Next”.
Installation is complete. If you do not uncheck the “Run NTLite” checkbox, the program will launch immediately after clicking the “Finish” button.
After launching NTLite, you will be asked to select a license type. Select “Free (limited, non-commercial)”. For our purposes this will be sufficient.
Then go to the folder with the unpacked Windows 7 distribution or open the flash drive on which the OS is ready for installation.
Next, we look for the boot.wim file, which is usually located in the “sources” folder. It is into it that USB 3.0 drivers will be integrated so that the installer can read information from the flash drive and begin installing the OS. Click “Open”.
After this, a list will appear that can be divided into 2 parts: 1 – operating systems that can be installed from this distribution, 2 – bootloader.
First, we integrate USB 3.0 drivers into the bootloader, because it was their absence that caused the error that was described at the beginning of the article.
Select “Microsoft Windows Setup (x86)” and click “Download”.
The image download procedure will begin, which depends on the power of your PC. The “Loaded” status will inform you when it is ready.
Now we will need drivers, which we will install. Which ones exactly depend on the chipset and its manufacturer. If you don’t have them, or you don’t know what you need, you can use this set.
This package contains the files needed for installing the ASUS Notebook ASMedia USB 3.0 Driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.
About USB Drivers:
Windows operating systems automatically apply a generic driver that allows users to transfer files using the USB (Universal Serial Bus) port; however, installing the appropriate software can bring about significant changes.
If the proper USB software is installed, systems will benefit from improved compatibility with different devices, numerous fixes regarding USB issues, and various other changes that can increase transfer speed with external storage drives.
When it comes to the installation steps, simply check to make sure that the download record is compatible with your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete update.
Bear in mind that even though other OSes might be compatible, it would be best if you applied this package only on specified platforms. In addition to that, as technology evolves from one day to another, we recommended that you always use the latest software available.
That being said, click the download button, get and apply the present version and enjoy your newly updated system. Also, constantly check back with our website to find out when a new version is available.
Note: The “download” link can lead either directly to the file or to the manufacturer’s website, where you can find the file you need.
This is due to the fact that some manufacturers do not allow direct links to files.
The Toshiba Surveillance series of hard drives for video surveillance systems has been supplemented with new 3.5” variations - Toshiba MD06ACA-V with a capacity of 6, 8 and 10 terabytes. The new products are designed for use 24/7 and support video recording in parallel from a maximum of 64 cameras.
The spindle speed of new devices connected via the SATA 6 Gb/s interface is announced at 7200 rpm, and the information transfer speed of the largest version is 237 MB/s, while for junior HDDs it reaches a maximum of 230 MB/s. In turn, the size of the cache memory of hard drives ...
The joint activity of the Swiss company ARCTIC and the German e-sports organization PENTA Sports led to the creation of the ARCTIC Freezer 33 PENTA processor fan. The new product features a fashionable design that combines the black outline of the radiator and the orange appearance of the 120 mm cooler.
The new mechanism system includes four 6mm nickel-plated copper heat pipes with direct contact to the processor heat dissipation cover, an aluminum radiator (49 0.5mm wide fins) and a 120mm axial cooler based on durable ...
In the near future, a new processor fan will go on sale - GELID Phantom, which will be available in two models: GELID Phantom and GELID Phantom Black. They differ from each other only in the additional black color of the base, radiator, and heat pipes in the second new device.
The structure of the GELID Phantom version includes a copper base, 7 nickel-plated copper heat pipes (3 x 8 mm + 4 x 6 mm) with special placement for more efficient heat dissipation, a two-section aluminum radiator and two 120 mm coolers.
The new mechanism can...