How to configure Media Player Classic in Russian. Organization of high-quality video playback - MPC, FFDSHOW, SVP, RECLOCK. Playback - output

Akim would seem to reproduce video, it can always be improved. There are quite a lot of video optimization methods, but one of the most important is the smooth adjustment. The reasons for which playback may seem insufficiently smooth can be different, but, as a rule, this is due to the disadvantages of the performance of the computer and its graphic subsystem, the incorrect order of alternation of the interleasing video fields, as well as the frequency of frame frequency and the screen update frequency.


Most video files that can now download on the Internet have a frequency 24 FPS.. This standard was taken back in 1932 year as a compromise between the quality of reproduction and the flow rate of the film. Playing video with a frequency of 24 frame per second one could make more smooth if you reduce the frequency of the screen update to 24 Hz. But you can do this only for TV screens, if you open the computer or laptop monitor settings, most likely will be only two parameters: 50 Hz and 60 Hz. Displays with support 24p. It is rare, but if your monitor is one of them, you think that you are lucky.

But what to do everything else? Go back through. If the monitor update frequency cannot be reduced to the video frame rate, then enlarge the video frame rate to the existing screen update frequency is very possible. How?

The interpolation method of neighboring frames. Its essence lies in the addition of intermediate frames generated on the basis of two "Real" adjacent frames. To do this, we offer to use a special program or abbreviated SVP.. The principle of its work well demonstrates a drawing taken from the official website of the project.

The main advantage of this program is that it does not need additional settings, and therefore can be used even beginners. SVP includes two main modules: Svpflow. and SVP Manager.. The first module is responsible for calculating the framework of the video stream, the second provides access to the settings of the program parameters. Download full (not core) version of the package from the official site www.svp-team.com/wiki/downLoad/en. . For the correct operation of SVP, you will also need a video player with support for external filters. DirectShow.. Best for these purposes is suitable 32-bit (!) Media Player Classic Home Cinema (MPC-HC) . Default MPC-HC is already included in the SVP Installation Package, Therefore, the most reasonable will set its standard version with the parameters that the master offers and not suffer later with the filter settings. Render component Madvr. SVP is not mandatory for operation, but it can be noted.

If MPC-HC is already installed

If you already have Media Player Classic Home Cinema, a tick in the SVP Installer's wizard window can be removed, but at the same time the player itself will have to configure a bit, in particular, add components to it. ffdshow. and. To do this, go to the player settings,

In the left column we find "External filters", pm "Add".

And in the window that opens is chosen FFDSHOW RAW Video Filter.

Return to the settings window and install a tick for added filter "Prefer". For adding Open in MPC-HC any video file, go to systemic tray, find there icon ffdshow. And you open the settings on it on it.

We find it in the left column item And celebrate His checkmark.

If the MPC-HC was installed with SVP, no need to set up. SVP is smart enough and all the necessary settings produces with the configuration of a particular computer, and to convert video 24 fps in 60 fpsIt is enough just to run into MPC-HC to play any video file. At the same time, in the lower left part of the player window, you should appear string "SVP: Playback 23.976 * (18: 7) \u003d 61.653 FPS Auto-section:" .

You have the aspect ratio and FPS may differ, but it does not matter. If such a string appeared, consider that everything is done correctly and the smooth playback is provided to you.

As for the settings of the SVP itself, they will not need you. However, it is still worth familiar with them, only you don't need to change anything, perhaps you know exactly what your actions will lead to.

Perhaps our readers have already aroused the question, and does not hide for all this any trick? It's too simple. No, there is no trick here, but the SVP interpolation algorithm is not deprived of certain flaws.

Firstly, this is a high load on the central processor throughout the video viewing. This is explained by the fact that the calculation of additional frames and embedding them into the video sequence the program produces on the fly. Secondlywhen watching a video containing scenes with fast-lived objects, sometimes minor artifacts can manifest In the form of foggy halo, whose blurred contours resemble a moving object. And yet, against the background of all the advantages that the use of SVP gives, these disadvantages seem very minor.

In this instruction, we will consider in detail setting up K-Lite Mega Codec Pack - the most popular package of codecs. Experienced users This material will seem useless, but newbies often have problems with installing this set.

Download the codec package K-Lite Mega Codec Pack from the official site. Install the codec package by closing all programs. In the first window of the installer startup click Next (hereinafter). In the next window, mark Advanced Mode (All Options Are Shown) - Advanced mode (shown all options). Click Next again.

You will appear the main window with settings of the K-Lite Mega Codec Pack program. In the top drop-down menu, select PROFILE 7: Lots Of Stuff - The most complete installation. Most often, users leave the settings "as is", but you can change the parameters for yourself, in this case the profile name in the top line will change to the Custom Selection (Specifications). The default settings are optimized well, so it is necessary to change something in them or not, decide for yourself, I will only explain some nuances. Please note that when choosing settings, recommended are first.

Attention! Also in the profile selection menu you will see an inscription (without player). If you select a profile with such a name, then you do not agree to the MEDIA Player Classic player installation and you will use the player installed in the system. You recommend you to decide for video playback.

When choosing an option with a player, you will be offered two editions of the famous media Player Classic Player(Regular - Normal) and (Home Cinema - House. Cinema). I prefer to use the second option, respectively.

What filters use in K-Lite Mega Codec Pack

We now turn to the consideration of the proposed filters to play media files. To make it clearer:

Filter - This is a media decoder used to decode video that supports multiple video and audio formats. Currently the most popular filters - ffdshow. and Lav.

Just the same, the second subsection after selecting the player will be DirectShow Video Decoding Filters - DIRECTSHOW video decoding filters (DirectShow is an interface to implement these filters in Windows). To use all sorts of video standards (for example, H.264), K-Lite Mega Codec offers several options.

I will not go into a detailed comparison of the filters used, at your discretion you can use both FFDSHOW and LAV, both projects are worthy of choice.

I am a supporter Lav Filters.and list them advantages, but also disadvantages :

  • Large set of video components, high quality.
  • Based on FFMPEG, like FFDSHOW filter, but unlike FFDSHOW has been implemented multithreading.
  • Includes the own development of the author CUDA decoder for NVIDIA video cards.
  • Support for exotic Hi10P profiles, MPEG 4: 2: 2, etc.
  • Support "Bitstream". Support TrueHD and DTS-HD.

Disadvantages:

  • Inferior ffdshow in the absence of postprocesse filters.
  • It is advisable to apply for not too heavy video files, for FullHD video use DXVA decoders.

In chapter DirectShow Audio Decoding Filterspresented sets of filters responsible for decoding audio. I advise you to use LAV or FFDShow.

Utility for switching audio tracks

In addition to a set of filters for each video and audio format, you need to choose splitter (in the subsection DirectShow Source Filters)which shares the flow of information obtained from the container supported by it (the most common containers - * MKV, * M2TS, * TS and of course * AVI), on video, audio and subtitles, which are transmitted to the corresponding decoders. Splitter allows you to select the audio track and subtitles for playback. It is important to immediately understand that not all splitters are equally well working with decoders. This is one of the main reasons why you have to think about choosing. I can recommend you Haali Splitter. or Lav Splitter..

All other parameters can be left by default. Click Next, A window appears with a folder selection for location, press again. Next. In the next window Select Additional Tasks. (Selecting additional tasks) The options of the components you selected will be displayed, so their full composition may vary.

Important points of the window of additional tasks:

  • RESET ALL Settings to their Defaults -the settings of all components will be reset to the recommended (option is relevant when updating the codec package).
  • Additional Shortcuts. - Additional shortcuts, for Media Player Classic on the desktop (Desktop) and / or on the QuickLaunch) and a shortcut for the Codec Tweak tool.

fFDShow Configuration (FFDSHOW Filter Settings)

  • Hide Systray Icons- Hide system icons, ffdshow works when playing a video file, and in the system tray, icons appear providing quick access to its settings. Putting a tick, you turn off the display of icons.
  • RESTRICT Usage To Whitelisted Applications - FFDSHOW has a "white list" compatible with this application filter, respectively, and the "black list" is also available. By installing a tick, FFDShow will be able to use only programs from the "White Sheet".
  • Force RGB32 Output - When activating this option, FFDSHOW will display the video in the color space RGB32. This is necessary to configure the color display, but this option loads the processor.
  • VOLUME NORMALIZATION - Volume normalization, this option is useful if the volume level is very low. But I advise you to check the MEDIA Player Classic player settings (option is described below).

Haali Media Splitter Configuration (Splitter Settings Haali)

  • Hide Systray Icon. - Hide the system icon in the tray. Put the tick to switch between the audio streams and the languages \u200b\u200bof the subtitles of the tray, without climbing the player menu.

Media Player Classic Configuration (MEDIA Player Classic Settings)

  • Video Renderer. - I advise you to select the EVR or MADVR renederer.

Renderer (or Render) - This is a program producing rendering (image receiving).

  • Use Internal Subtitle Renderer - Use the built-in renderer for subtitles. Setup is necessary to use hardware acceleration.

DirectX Video Acceleration (abbreviated DXVA.) - an interface designed to decode video processor video card.

  • Use High Rendering Resolution - Includes high clarity of subtitles.
  • Enable Internal MPEG-2 Decoder - Use the internal MPEG-2 decoder. For example, you are satisfied with the decoder in the already installed third-party player.
  • VOLUME NORMALIZATION - Normalization of sound.
  • Install Language Files for MPC -The setting of language files to turn on the desired language, you need to go to the bookmark View - Language..

Tweaks.

  • - Allows you to choose static, animated and animated with subtitle buffering.

Points in this window can be more, depending on the settings. There will be questions, write in the comments. Now press the button Next and go to the Hardware Acceleration window . You will need to select filters for H.264 and VC-1 standards. For the owners of the NVIDIA video card, select LAV Video - NVIDIA CUVID in both items (older 8800GT models), for users of ATI - LAV Video DXVA2 Native video cards (models starting with HD series). We put a none only if neither the central processor nor the video card does not support the hardware acceleration of the video. Other options must be selected depending on the PC configuration and the settings of the codec package. Good reviews have FFDSHOW DXVA Decoder, and so much depends on the bundle: used renderer and HD video processing filter.

In the next window, you can choose a program player with which you would like to associate your media files, that is, what player to play.

Click Next, Slip the ticks opposite the necessary multimedia format for each player selected in the previous window. Tap again Nextand select the configuration of your speakers.

Press again NextThe window will display the configuration you selected for installation. Click InstallWait for the package installation. After installation, you will be prompted to put ticks before the filters that you can configure at your discretion. Click FINISH.

P.S. Check the performance of your player. With the problems that have arisen, we write in the comments below.

Install Media Player Classic is very easy, especially if you read our simple and detailed instructions on an example on installation on Windows 7. Our portal always features the latest versions of programs, so we advise you to download Media Player Classic for this link.

Step-by-step guide:

  1. Download and open the player installation file, then click on "OK".
  2. Then press on "Further".
  3. Tick "I accept the terms of the agreement" and click on the button that appears "Further".

  4. We advise you to click on "Further"To install the player in the default folder. But if you want to install it to another folder, click on "Overview" And specify the desired location for installation.

  5. Here, too, press on "Further"And if you want to remove unnecessary checkboxes before it.

  6. Again click on the button "Further".
  7. You can specify the program label to be on the desktop for all users, for the current user, or remove the icon from the desktop, removing the corresponding ticks. After click on "Further".

  8. Now click on the button "Install".
  9. Wait for the installation. After click on "Complete".

Congratulations on installing Media Player Classic Player on your computer.

This is a convenient player in all plans. It is based on the classic Media Player Classic player and has a built-in set of media codecs, thanks to which many formats of audio and video files can play without installing third-party codecs.

In order to install Media Player Classic (MPC) You need to perform a number of the following instructions.

Step 1. To start the player installation process, double-click on the installation file. In the Installation language selection window, select Russian and press OK.


Step 2.. Before continuing the installation of Media Player Classic, it is recommended to close other applications so that it does not occur when installing. To continue the installation click Further.


Step 3.. Carefully read the license agreement. Agreeing with him, put the switch to mode I accept the terms of the agreement. And then click Further.


Step 4.. In the window Setting installation folder Leave the default path or change it by clicking on the button. Overview. To install Media Player Classic you will need 11.9 MB Free scene on the hard disk. Continue the installation of clicking Further.

Step 5.. Select the components you want to install. To do this, place or remove the ticks opposite this component. Zhmem. Further.

Step 6.. In a new window, you can select the folder in the Start menu. If you do not want to create a folder from the Start menu, check the box in the field. Do not create a folder in the Start menu.. To continue click Further.

Step 7.. In the next window Choose additional tasks. In block Additional icons Put or remove the checkbox in the field Create an icon on the desktop and select for whom to install them Only for the current user or For all users of this computer. Then click Further.

Step 8.. To install everything is ready. In the center of the window you will be presented all installation information. To install MPC Click the button. Set.

Step 9.. The installation process will begin, during which the installation wizard copies and establishes all the necessary components. Installation last 5-10 seconds.

Hello everyone, friends! Today I will help customize the volumetric sound 5.1, such as in the home theater (and may not only in the home ...).
Not a pseudocode and not expanding the sound base due to the adjustment of the neighboring channel in the phasing.
Namely, each sound track on the file corresponded to its column in the room.
To customize the sound 5.1, this article will help us.

By default in the player, more precisely in the codec, this is configured that the sound on the receiver from the computer only in the front channels: left and right.
It's time to expand the horizons!

Under 5.1 implies the following system:
C. - Central channel (it is often used for voice)
SW. - Subwoofer channel (in order to the floor bombed, yes stronger, neighbors for joy)
FL - Far front left
Fr. - Far front right
SL. - Far rear left (located behind the listener on the left)
Sr. - Far rear Right (located behind the listener on the right)

You need to get an amplifier (receiver), which will support the connection of 6 columns, and that each had a separate entrance and a separate output.
Also, on the computer, the sound card must support such a connection.

If less outputs, you will have to purchase an additional audio card.

Green connector, it is usually the default master. Speakers are connected to it: the left and right front.
Orange combines the central speaker and subwoofer.
Black is the rear speakers who are behind.
Gray is for 7.1 (plus 2 more columns in our still life).
In the sound card, to begin to exhibit 5.1 (not, well, it is possible to 7.1 if the instrument allows).
Showing the example of the Realtek sound card. Although the interface is not very different and has older versions. However, the new is more convenient and more beautiful.


To the right of the unfolding list there is a PLAY button. It allows you to check how each column works separately.

We will configure the example of the Classic player, which is part of the K-Lite Codec Pack.

And do not say that:

  1. This is a code cooler (especially people who mount the video), I will say this: if the hands are direct, then the programs will work for the benefit.
  2. In the Classic Player, it is impossible to get 5.1, as only 2 columns work. Everything is possible and 5.1 and even more so: to squeeze all 17 channels at the same time, if you have the equipment. Only in the case of 17 columns - they will power them and wires.

Start the video file in the Classic Player. Let us turn to the settings and make sure that the sound is sent to the desired sound card (I have the 15th number of "RealTek speakers"):


Sound goes? In all columns? Not? We go to the tray, there are codec icons with which the player works:


You need to open LAV.


Remove the Mixer tick. It is usually placed by default for 2 channel audio cards, but we have already come further, breaking stereotypes and restrictions!
Apply changes. If the sound in all columns does not appear, then in the unfolding list, select 5.1, applied again.

Everything, the sound must be in all the necessary speakers.
If this is not the case - check the equipment, restart the player, or see if the video file ended? \u003d))

Tags for search engines, do not read them:
How to turn on the sound 5.1 in Media Player Classic, setting the sound 5.1 in Media Player Classic, Audio 5.1 No Media Player Classic, 5.1 Output Media Player Classic, configure 5.1 on Windows 7, configure 5.1, configure 5.1 on Windows 8, configure 5.1 on your computer, Configure 5.1 Sound how to configure 5.1 on Realtek, how to configure 5.1 on Windows XP, 5.1 Akoustics Setup, configure audio system 5.1, Setting up 5.1 in Windows 7, Setting up 5.1 in Winamp, MPC,