Simple ways, instructions and recommendations. How to unlock a laptop if you forgot your password? Simple ways, instructions and recommendations How to disable password input on a laptop
To protect your data stored on a laptop, users set passwords. But sometimes such an unpleasant situation arises, as the inability to recall the code that allows you to enter Windows. Do not despair. Everything can be restored pretty quickly and without loss of data. How to unlock a laptop will be considered further.
Is it possible to restore the password?
If it is impossible to enter a password, some immediately begin to reinstall the operating system. But there are simpler methods. They will tell you how to unlock the laptop in case you forgot the password. Initially, you can use the tip on the welcome screen. It happens, it helps to remember the password on its own, without resorting any additional actions.
If, even after reading the prompts, it was not possible to recall the password, you will have to go to more radical methods. Code in this case can be restored or hack. All data on the hard disk will be saved.
To understand how to quickly unlock the laptop, you should study several methods. In various sources, many ways are presented, both useful and not very, how to cope with a similar problem.
What to do to restore the password?
Filtering tips that can lead to a complete laptop operation, you should select the most suitable path. You should not delete SAM files, otherwise the laptop may not include at all. A system error occurs, a laptop will require a reboot, but everything will happen on a closed circle. There are already ordinary unlocking methods will not help.
Next, determine the path of actions, how to unlock a laptop if you forgot the password. Lost password can be restored or hacking. In the first case, you will need to log in in safe mode, and in the second - to use special software.
Log in to Safe Mode
To unlock the laptop on which the Windows system is installed, you need to log into the laptop in need to restart the laptop and wait for a short one to press the F8 button. It is better to do this several times to not skip the moment when the system is ready to execute the command.
Depending on the laptop brand, the bio input request may be carried out using another command. This must be clarified in the manual for this type of technology.
After that, the screen should be booting on which the available operating system start modes will be indicated. If the laptop starts uploading Windows as usual, it means that something was done wrong. It will be necessary to repeat the procedure.
To understand how to unlock a laptop (Windows or other operating system is not installed - not the essence, it is important) and not damage the information on the hard disk, you must carefully read the instructions and perform actions exactly. When the startup modes are launched in the BIOS, you will need to select "Safe Mode" using the keyboard.
Laptop will load the system. It will be necessary to log in on behalf of the administrator. This user defaults the password.
Password change in safe mode
Being in the safe mode system, you will need to make the following actions. You need to start the Start button and open the control panel. Then you need to enter the "User Accounts" menu. Here the user will find his account, the password from which was lost or forgotten.
In the left side of the screen will be located a list of available commands. It remains only to find "Change Password". New encoding will need to be introduced 2 times. If you leave both fields without records, there will be no longer a password on this computer.
Technology, how to unlock a laptop if you forgot the password, almost completed at this stage. You will need to click the Save button and restart the laptop.
Faster method
There is another, faster approach that allows you to unlock a laptop. To do this, you will need to run the console on the administrator account.
Using the simultaneous press of the Win + R buttons, the "Run" tab is called. A dialog box appears, in the empty field of which you need to enter CMD and press ENTER.
On behalf of the administrator, the console will open before the user. It needs to register Net User * user_name * * new_code * and confirm the input again. These actions will help to solve the issue of how to unlock the disk (laptop with Windows) without damage to data. After restarting the system, the input is performed as usual.
Application of Special Software
To understand how to unlock a laptop if you forgot the password, one more method should be considered. Sometimes the previous method cannot be made due to changing certain settings by the user. In this case, you can use the Special Program.
You can install it in the form of a disk image or on different platforms. The result will be identical. It all depends on how it is more convenient for the user. The image is installed on the prepared loading flash drive or disk. After that, going to the BIOS, you will need to select the method of loading the system from the flash drive (disk).
When starting, the program will start selecting a password to a laptop. The technique, how to unlock the laptop, should be performed clearly according to these rules. No files are required. The program will select the former code and will require restart the laptop. This method takes more time, but it will help if it did not manage to change the password in safe mode.
Solving the question, how to unlock the laptop, the user can go in two ways. The system code can be hacked or restored. It all depends on the system itself. Information on the hard disk, thanks to this approach, will not disappear. Therefore, these methods are considered fairly effective and appropriate. If you fulfill all the instructions recommendations, without deleting other files, the assignment of which the user may not even know, the laptop will turn on again. Faced with a similar problem, you should consider past errors and store a password in a safe place.
Almost always, our electronic devices are password protected. Often we do it just like this, just in case. After all, why do it do if your PC or laptop is used only at home, in a circle of loved ones, or in the office, when no one has access to it? Suppose you decided not to burden yourself with memorizing complex combinations of characters and numbers. The question arises: when turned on? For a start, take the code from the administration and the password discharge disk.
What is the administrator password and how to remove it
When you first turn on your computer or laptop, each user is invited to come up and enter a security code. We do it and write it somewhere in order to be the right to be able to enter our device. This combination is the administrator code. Now consider how to remove the password. To do this, run the operating system and find ourselves in it as an administrator. We go on the next path: "Start", "Control Panel", "User Accounts". Click on the last emblem and before us - the administrator account. The removal of your password tab is located on the left of the image. We'll have to enter it again. And everything, the case is done.
Deleting user account passwords and these entries themselves
In order to clean the codes of other accounts, click on "Managing another Account". Then we find the desired and do in their list, as in the previous case: from the image on the left there is an inscription "Deleting your password". Click on it and enter the code from this account, not the administrator. It is done. So we figured out how to remove the password from the computer when turned on. If you have many accounts, and you do not want to write various combinations when you turn on the device, appreciate the need for these records and remove all unnecessary. To do this, after "User Accounts", go to "U / W Management" and click on the desired one, and then to "Remove U / W". After that, the system will ask whether to save the files of this user on the computer. If not, delete them if you need, select the Saving File tab. To complete the operation, you must confirm it. There is such a standard account as "Guest". It is not recommended to delete it, but it is possible to turn it on or completely disable. When the administrator's profile is disconnected, only the administrator profile will remain and, of course, the question will disappear, how to remove the password from the computer when turned on. In the case when you removed it, the device turning on will always be performed without additional manipulations.
Creating a password discharge disk
It also happens that the password forgot. In order for this not to turn into a large problem, users create a password discharge disk. With it, you can easily reset and log in. How to do it? Quite simple. Need a flash drive with a minimum of free space, the information on it does not hurt and will not suffer. Consider the following factors: the disk must be done for all accounts; In the case of creating several flash drives, there will be only the last; When changing the password, a new disk is not needed, an old will function. Now about the process itself. In the "start" click in the photo of your account and insert the external memory into the device. Select the item "Creating a Password Reset Dice", the new window will open "Next". Choose your flash drive, enter the code of your account and click "Next." The process itself will begin, in its course it will be necessary to press again "Next", and then "ready". Everything! At the userkey.psw file appeared, which is responsible for the discharge operation.
How to remove a password from a computer when turned on using a discharge disk
What happened to what you were afraid for a long time. When you turn on the computer, you need to enter the code, and it is lost and empty in memory. What to do? And then you remember that they have not so long ago, creating a flash drive with a password reset. Find it, try to enter without entering the code. A button with the inscription "Reset Password" appears. Click on it and insert the saving USB flash drive. You wish to have a new password to log in - enter it twice and tip, you do not want - just click "Next". All, the code is reset. Actually, the password when enabling the computer is recommended to have. So keep it well or remember.
Hello everybody! Randomly found a way to reset the password with bios in a laptop without disassembly. It's very convenient!
How to remove the password on the bios in a laptop?
All the information of the BIOS settings is stored in the chip on the motherboard, and the battery on the board is used to store the information of this chip when the laptop is turned off from electricity or got a battery. And in order to reset this information, you need to disassemble it and pull out the battery or disappear where it is soldered. The truth is inconvenient?
BIOS password generator
Therefore, I offer another way without disassembling. I found a special program and for you it translated into Russian to be convenient to use. And we see the field in which you want to enter your code.
You can restore the password from laptops: Acer, Compaq, Dell, Fujitsu-Siemens, HP, Compaq, Insyde H20, Phoenix, Sony Vaio, Samsung. At Asus is not sure what is suitable, but try.
Procedure
- Turn on the laptop and try to enter the BIOS, usually the F2 key.
A message will appear Enter the password.
Enter any set of characters and press ENTER. There will be a sign unfair password.
We recruit another 2 times random numbers and the BIOS will offer to enter a password to unlock or continue the system boot.
We choose Enter Unlock Password (ENLOCK Password).
A password will appear that you want to enter.
In the service, enter this code and click Get a Password.
Depending on your company, laptop enter the received code in the proposed field.
And press ENTER. And we get into the BIOS.
Now go to the Security tab and remove the password. We press ENTER on the SET Supervisor Password field and enter the password that we generated in the service, and in the second and the third field do not write anything simply press ENTER.
And now we do the same in the SET HDD Password field, remove the password for loading the hard disk.
Everything, a password in a laptop with a bios is removed.
Many users are interested in how to remove a password from a computer or laptop on Windows 8. In fact, it is not completely difficult, especially if you remember the combination for the entrance. But there are cases when the user simply forgot the password from his account and cannot log in. And what to do? Even from such, it would seem that there is no easy situations, we will tell about in our article.
If you remember your password to enter your account, then there should be no problems with the password. In this case, there are several options to disable the password request when entering the user's account on a laptop, at the same time we will analyze how to remove the password for the Microsoft user.
Reset local password
Method 1: Turn off the password input in "Settings"
Ready! Now you will not need to enter anything every time you enter the system.
Method 2: Password reset using the "Run" window
So we did not remove the password, but simply set up an automatic input. That is, every time you log in to the system, your account data will be requested, but they will be entered automatically and you will not even notice this.
Disable Microsoft Account
Ready! Now reboot using a new account and you will no longer need to enter the password and enter your Microsoft account.
Password reset if you forgot him
If the user has forgotten the password, everything becomes harder. And if in the case when you used the Microsoft account when logging into the system, everything is not so scary, then many users may occur with the dump truck of the local account password.
Reset local password
The main problem of this method is that this is the only solution to the problem solving and it is necessary to have a bootable flash drive of your operating system, and in our case - Windows 8. And if you have it, it is wonderful and you can proceed to access to access to the system.
Attention!
This method is not recommended by Microsoft, so all the actions that you will perform, you are doing only at your own risk. You will also lose all personal information that was kept on the computer. In fact, we will simply roll back the system to its initial state.
Now you can log in to the new user account using a new password for this. Of course, this method is not easy, but users who have already met with the console, there should be no problems.
Password reset Microsoft
Attention!
For this method, the problem solution requires an additional device from which you could go to the Microsoft website.
Now, using just a conventional combination, you can enter the Microsoft account on your computer.
We reviewed 5 different ways to remove or reset the password in Windows 8 and 8.1. Now, if you have problems with the entrance to the account, you are not confused and you will know what to do. Include this information to friends and acquaintances, because not many know what to do when the user has forgotten the password or simply tired every time to enter it at the entrance.
If you have created a Microsoft account in the Windows 10 process, or specified a password for a local account, then each time you enable the Windows 10 computer will request this password. You will not see the desktop until you enter the password. I think if you went on this page, then you know it.
Account password is useful, if a computer besides someone else uses the computer. Or your computer is for example in the office. But, if he is not needed, and you only spend time on entering the password, it is better to turn it off. Now I will show you how to quickly remove the password request when entering Windows 10. After this procedure, the login will be automatically input. Pressed the power button, and the desktop will immediately appear, and not a window with a password request. We will turn it off.
Please note that we will not completely remove the password, but simply turn off the request when logging in.
I also show how to turn off the password input when you exit sleep mode.
Automatic login in Windows 10 without a password request
We do this: Press the keyboard shortcut + R. Introduce in the field control UserPasswords2., or netPlwiz (You can simply copy and paste), and click on the button OK..
Window opens. To remove the password when you turn on the computer, we need to remove the checkbox from the point Require entering the username and password. Press the button Apply.
Another window will appear in which we need twice to specify the password from the account, and click OK..
The next time you turn on the computer, Windows 10 boot automatically, you will immediately see the desktop. Without the need to enter a password.
There is another way - to disable the request in the registry. But it is much more difficult, and I do not advise you to use it. Therefore, I will not even write about it.
Remove the password request in Windows 10 when leaving sleeping mode
When a computer comes out of sleep mode, Windows 10 can also require a password. It is not always convenient, therefore, I propose to turn off the password input. But this feature can be useful for many. You can, for example, by pressing the combination of keys WIN. + L. Block your computer, and no one can get access to it until you enter the password.
To shut down, open Start – Parameters. Choose a section Accountsand go to the tab Input parameters. In the recording settings in the system set Never.
That's all, no longer need to spend time on entering passwords. But I advise you to think well before turning off this feature.