Critical error The computer will be rebooted in a minute

The following problem arose: on the site of the Federal Tax Service at the time of checking the implementation of the conditions for access to the personal account of the legal entity - in internet Browser Explorer appeared window with a message: "Your work session will be terminated. A critical problem is found, the system will automatically restart one minute. Save the work now. " And a minute later, the computer really rebooted independently!

To solve this problem - You need to update the program version on the computer Cryptopro CSP. . I was helped by updating Cryptopro to version 4.0.9963 (You can version above).

You can download the Program distribution free on the official website of Cryptopro. True, it will be necessary to register on it. After installing the program, you must restart the computer.

If a this error: “A critical problem has been found, the system will automatically restart one minute later."You do not have on the FNS website, but at some other, then you can use the following solution:

In browser Internet Explorer. Go to the menu bar to the "Service" tab - "Browser Properties" - go to the "Advanced" tab and remove the daws from two lines Use TLS 1.1. and Use TLS 1.2. .
Then click "Apply" - "OK". Restart the browser.

After the next OS update (usually, it is Windows 7) or the installation into a system of any program, the user may encounter a message "A critical problem has been detected. The system will be automatically rebooted in one minute. Save the work now. " It usually signals the presence of viral malware on the computer, causing failures in the operation of the OS and the need to reboot. We will analyze what causes a critical problem of your system, and how to fix it.

Notification of the future reboot

Causes of dysfunction "Your work session will be discontinued"

After the appearance of a critical problem detection, the user gives about 1-2 minutes to save its data. Typically, the allocated time is not enough, so there is no sense to run from PC any important files.

In most cases, the problem causes any virus that fell to the user's PC via the Internet. Also in some case, the cause of the problem is any recently installed software (for example, a popular "Discord"), which is unstable and causing the need to reboot.

Attempts by the user to disable the planned reboot using the well-known Shutdown -a command, do not interfere with the planned PC restart.

Let's wonder the ways to solve the error "The critical problem is detected. The system will automatically restart one minute" on your PC.

Remove viruses from a computer

Since in the absolute majority of cases, the cause of the "Critical Problem" error cause is a virus, it is necessary to use verified antivirus programs To remove malware with PC. Good efficiency has shown such programs as "Dr. Web Curet" and "AdwCleaner", which you need to download on the PC and check your system.

The greatest efficiency showed the launch of data utilities in safe mode.

  1. To do this, download the "adwcleaner" (or curet) from the network, copy it to the USB flash drive.
  2. Restart the PC in safe mode (to activate the latter quickly click on F8 when you start the PC), and then run your antivirus.
  3. Remove all the virus found with it, after which you restart the computer in standard format.

 Use "Dr. Web Curet" to combat malware

Remove the newly installed software

If the error starts to appear recently, then look at which programs you have recently been installed on your PC, and then remove them from the system. The cause of a critical error is often becoming the program "", therefore I recommend temporarily remove it from your car.

In some rare cases, you can disable the scheduled reboot of your system.

  1. To do this, press the Win + Pause keys.
  2. In the window that opens, select Left "Advanced System Settings".
  3. After that, in the "Download and Recovery" section, click on the "Parameters".
  4. Remove the checkbox from the active option "Run automatic reboot».
  5. Click on "OK", and restart your PC.
Disconnect the automatic PC restart

Change the system registry

Click on Win + R, type Regedit and press Enter. Go along the way:

Create the right parameter called:

type REG_DWORD, and assign it a value 23 in decimal system calculus.

Perform system rollback

Click on Win + R, enter the RSTRUI there, select a stable earlier recovery in the list, after which you roll back the system to the state you choose.


Conclusion

In the overwhelming number of certain cases, the cause of the error is viral malware, causing critical failures in the system. It is recommended to use trustworthy anti-virus tools to remove viruses, after which the error "is detected a critical problem. The system will be automatically rebooted in one minute" will be eliminated.

Given: MSG table with a large number of records.
CreateTableMSG (IDINTEGERNOTNULLPRIMARYKEY, DESCRIPTIONCHAR (50) NOTNULL, DATE_CREATEDATE);
A task:
You need to clear the table from the data /
Decision: To solve this task there are several ways. Below the description and an example of each of them.
The easiest way ( first option) - execute recording removal operator. When executing it, you will see the result (how many records are removed). Convenient thing when you need to know exactly and understand the correct data deleted. But there has deficiencies before other options for solving the task.

Delete frommsg; - Deletes all lines in the table - Every lines from which the creation date "2019.02.01" DELETE FROMSG WHEREDATE_CREATE \u003d "2019.02.01";

Second option. Using the operatordml to clean all rows in the table.
Truncatetablemsg;
At the same time, several features of using this operator:
He is not in Firebird, so we use the first and third option. After you ...

Stage 1. Testing Testing (interaction with test circuit GIS GMP) # address of the GIS GIS test:
gisgmp.wsdllocation \u003d http: //213.59.255.182: 7777 / Gateway / Services / sid0003663? WSDL
gisgmp.wsdllocation.Endpoint \u003d http: //213.59.255.182: 7777 / Gateway / Services / SID0003663
This address is prescribed in the SP settings. Update must be prescribed in the logging settings file, specifying the value Trace. After making the specified values, you need to run the joint venture and client ACC (restart, if it was already running) Next, from the zor or application bu / AU to pay funds, it is necessary to perform the action "Create a payment about the payment", if system controls are passed - then will be created About payment. Which later will need to unload.
After unloading, you need to check the status of the "Request Status Request". After that, Ed Minimaling about the payment passes to the status "Accepted GIS GMP" - ...