How to remove secure mode on Philips phone. How to enable and disable secure mode on android phone? Other ways to turn off safe mode in android
And how to turn it on. However, sometimes users have another question - how to disable secure mode on android. If there are difficulties with the return of the system to full work, then the ways presented below will help you quickly solve the problem.
Reboot
The easiest way to get out of the secure mode is to restart the device. When necessary actions In Safe Mode, press the power button and hold it until the completion of work is appeared. Select "Reboot".
Next launch Android Must be downloaded in normal mode, all applications will work, no restrictions from Safe Mode will remain. On some android firmware When working in safe mode, a special message appear in the notifications panel. When you click on it, the device restarts, leaving Safe Mode. The next time you start in the usual Android function.
Shutdown
If after rebooting you found that it was not possible to remove the safe mode, try to get rid of it, turning off the device completely.
You can use several options:
- Just turn off the phone by pressing the power key and selecting the "Disable Power" item. Wait 10-15 seconds and turn on the device back.
- Turn off your smartphone, then turn it on. When the logo appears, clamp the "Home" button and keep it until the system is fully loaded.
- Turn off, turn on, when the logo appears, clamp the volume key to reduce. Keep while Android will not boot.
- Perform similar actions only to hold the volume key.
If these methods do not help, turn off the power of the smartphone, and then remove the lid and remove the battery. Wait 5 minutes, install the battery in place and try to turn on the phone again. Android should boot in normal mode, without restrictions from Safe Mode. 
The choice of method depends on the version of Android and the manufacturer of the smartphone. For example, to remove the SAFE MODE mode with samsung devices, It is usually enough just to reboot it without resorting to additional manipulations.
Reset
If you do not understand how the phone was in a safe mode, and you cannot turn off the Safe Mode in the methods described above, the only way to return the system to a normal state is to reset the settings. This is an extreme measure, to resort to which it follows in the event that the use of other methods does not bring results.
As a result of the procedure Hard Reset. All data, including messages, contacts and installed applications will be deleted from the phone / tablet. Therefore, before resetting the settings, it is recommended to take care of creating a backup. Hard Reset can be performed in two ways. First, try apply the reset through the settings:
If the parameters cannot be reset via settings, use to roll back to the factory state. Recovery Mode.. To start Recovery Mode, you need to turn off the smartphone and when you turn on simultaneously press the power button and the reduction key / increasing volume. Do not wait for the appearance of the logo, and keep the buttons immediately clamped together. On the sAMSUNG smartphones The "Home" button is added to the combination.
Many users include safe mode ("android"). How to turn it off? Usually, devices running on this platform are moving into it in case of damage operating system or then when third-party applications Call any failures in the device. There are several ways to remove on android.
Restart device
First, it is necessary to determine the reason for the inclusion of this very mode. It is activated, as a rule, due to a system failure or a serious error of any application. In safe mode, the user will not be able to run any third-party application. If suddenly the device has passed into it, then you just need to restart the device, and the problem will be solved.
Check the notifications panel
In some versions of the operating system, the user sends a notification when switching to safe mode ("Android"). You can turn it off by pressing. The device will automatically reboot and starts normally.
Pressing and retaining the power button
When this action is performed, the menu will open where you need to select a reboot or shutdown. In the second case, you need to not forget to turn on the device back. It will boot as usual. And if this did not happen and again everything happened, how to remove the safe mode on "Android"? About this next.
Simultaneous pressing two buttons
Many users claim that from this mode, you can exit if at the time of restarting the device press and hold the power button simultaneously with the volume button.
If the user on the device is broken to adjust the volume, this step It may lead to a constant restart of the device in safe mode. In this case, you will have to carry a gadget in service center Or, if there is enough knowledge and skills, reveal it and try to independently correct the problem.
Removing battery
How to remove safe mode on "android" yet? If there is such an opportunity, you can remove from the device rechargeable battery And maybe it will work as usual after switching on. Before removing the phone or tablet must be turned off. It is necessary to wait at least one minute so that capacitors completely discharged in the device, and then insert the battery back and enable.
Deleting applications
Applications working with failures are the most common cause of the device's care to safe mode. To exit it, you need to delete newly installed programs.
To do this, you need to open the gadget settings, open a list of all installed applications And go to the tab with downloaded. These programs cannot be launched in safe mode, but it is possible to remove it. It is recommended to get rid of all programs that have been installed in the near future. After that, the device must be restarted. If not worked, then you need to go further.
Reset device
How to remove a safe mode on "android" (tablet or phone), if nothing of what was described above does not help? Reset device settings.
The first thing you need to do is to create backup All data in safe mode. Reset all settings will lead to full removal All information on the device. It will become as it was with the very first launch. That is why it is recommended to make a backup of the data that should not be deleted. How to do it? There are the following ways:
- connect a gadget to a computer and copy all the necessary data from it to hDD or in cloud storage;
- all applications that were purchased for money will be saved and will again be installed after rebooting;
- when resetting the settings, contacts will not be affected, but in order to minimize the risk, it is better to make them export to a separate file.
How to make a reset?
This step is carried out through the device settings. There you can find the item responsible for backup and reset. Need to choose a reset there initial settings And confirm your decision. The process can last for a very long time - from 20 minutes.
In the event that the device cannot be reset in secure mode, you need to use the recovery mode. To do this, clamp the power button and turn off the device. Then, depending on the device model, you need to hold the combination of buttons that can be viewed in the instructions or on the Internet. Start recovery mode. Using the volume buttons, select the device reset and press the power button to confirm. It remains to wait for the discharge process, which will take several minutes.
After the settings are reset, the device can be configured by creating a new account Or entering the already existing one. In the second case, access to purchased content will be again received.
Not everyone knows, but on Android smartphones And the tablets have the ability to run in safe mode (and those who know usually face it by chance and are looking for ways to remove safe mode). Serves this mode, as in one popular desktop OS, to eliminate faults and errors caused by applications.
In this manual, step by step about how to enable and disable secure mode on Android devices And how it can be used to troubleshoot problems and errors in the phone or tablet.
Enabling secure mode
On most (but not all) devices on Android (versions from 4.4 to 7.1 at the current time) to enable the secure mode, it is enough to perform the following steps.
1 . On the phone on or tablet, press and hold the power button until the menu appears with options. Turn off», « Reboot"And other or the only point" Disable food».
2
. Press and hold the item " Turn off" or " Disable food».
3
. A request will appear, which in Android 5.0 and 6.0 looks like " Switch to safe mode. Go to secure mode? All applications of third-party suppliers are disconnected».
4
. Click " OK"And wait for it, and then re-loading the device.
5
. Android will be restarted, and at the bottom of the screen you will observe the inscription " Safe mode
».
As noted above, this method Works for many, but not all devices. Some (especially Chinese) devices with strong modified versions Android can not be downloaded to safe mode in this way.
If you have this situation, try the following ways to run the safe mode using the key combination while the device is turned on:
- Turn off the phone or tablet fully (hold the power button, then "turn off the power"). Turn it on and immediately when switching on (usually, there is vibration), press and hold both volume buttons before downloading.
- Turn off the device (completely). Turn on and when the logo appears, clamp the volume button. Hold until the download is complete. (on some Samsung Galaxy). At Huawei, you can try the same thing, but to press the volume button immediately after the device is started.
- Similarly previous wayBut hold the power button until the manufacturer's logo appears, immediately when you appear to release it and at the same moment press and hold the volume button (some Meizu, Samsung).
- Fully turn off the phone. Turn on and immediately after this hush the power keys simultaneously and reduce the volume. Release them when the phone manufacturer's logo appears (on some ZTE Blade. and other Chinese).
- Similar to the previous way, but hold the power keys and reduce the volume before the menu appears from which to select the SAFE MODE item using the volume buttons and confirm the download in the safe mode by briefly pressing the power button (on some LG and other brands).
- Start to turn on the phone and when the logo appears, the reduction button simultaneously and increase the volume. Hold them before loading the device in safe mode (in some old phones and tablets).
- Turn off the phone; Turn on and hold the "Menu" button when loading on those phones where such a hardware key is present.
If no way helps, try searching for request " model sAFE devices Mode."- It is possible that there is a response on the Internet (the request is in English, since in this language is more likely to get the result).
Use secure mode
When you download the Android in safe mode, all applications you have installed are disabled (and re-enabled after disconnecting the secure mode).
In many cases, only this fact is enough to unambiguously establish that problems with the phone are called by third-party applications - if in a safe mode you do not have these problems (no errors, problems when the Android device is quickly discharged, the impossibility of launching applications, etc. .), Now follow the safe mode and alternately disable or delete third-party applications before identifying the problem that causes the problem.
Note: If third-party applications are not deleted as usual, then there should be no problems in safe problems as they are disabled.
If the problems that caused the need to start a secure mode on Android remain in this mode, you can try:
- Clear cache and data problem applications (Settings - Applications - Choose need app - Storage, there - Clear cache and erase data. Starting just with cache cleaning without deleting data).
- Disable error applications ( Settings - Applications - Select the application - Disable). This is not impossible for all applications, but for those with which you can do it is usually completely safe.
How to Disable Safe Mode on Android
One of the most frequent questions Users are related to how to get out of a secure mode on android devices (or remove the inscription " Safe mode"). This is, as a rule, with the fact that the input to it is accidentally by turning off the phone or tablet.
Almost all Android devices disabling the safe mode is very simple:
1
. Press and hold the power button.
2
. When windows appear with paragraph " Disable food" or " Turn off", Click on it (if there is an item" Reboot"You can use it).
3 . In some cases, the device immediately reboots in normal mode, sometimes after shutdown, it is necessary to turn it on to manually so that it starts in the usual mode.
Of alternative options Android reboots to exit the safe mode to me only alone - on some devices it is necessary to hold and hold the power button before and after the window appears with items to shut down: 10-20-30 seconds until it turns off. After that, you will need to turn on the phone or tablet again.
Android is an open source system, which implies some freedom to upgrade devices on this OS. So, users can install applications from unverified sources: from the Internet or from a computer. These files often contain viruses that can block the operation of the entire device.
To solve problems and cleansing the system, the SAFE mode is provided when only the option predefined options work on the device. In particularly launched cases, the smartphone is loaded only in this way. What to do to android phone Disable secure mode?
Restart device
To exit SAFE-MODE, it is often enough to restart the phone. Press and hold "Start", in the menu that appears, select Restart. If it is not, - "disable" (then the gadget needs to be turned on - it will resume work in standard mode). Some devices have the "RESTART" item in the top of the quick access panel.
For some models of the usual restart little. In smartphones and tablets "Samsung" 2014-2015. It is necessary to press the power and, not paying attention to the menu that appears, hold it before the reboot start (10-30 seconds).
Remove the battery
Disconnecting the battery is an analogue of the computer's emergency shutdown on Windows. Remove the battery from the machine for a couple of minutes to unload capacitors, insert back and turn on the gadget.In some models with a non-removable battery, an SIM card (SONY, SAMSUNG) is removed to the forced restart of the gadget.
Restart the phone with key combination
In some SAFE-MODE models, not through the main menu, but using the key combination. It turns off the same way.In reboot and changing modes, press the "Start" buttons simultaneously and:
Clean application data or cache
A self-loading of the gadget in SAFE mode often cites a non-working or braking application installed from unknown sources. If the restart does not change anything, try removing the options added to the last, or clean the cache.In the Open Settings section of the "Applications" section. Find those that are installed immediately before the failure. In the tab that opens, select "Clear Cache". If it does not help, the "Delete" button will remove the option completely.
It can also help full cleaning of the device cache. Standard software no, and additionally installed type CCleaner App is not available in Safe-Mode. Therefore, it is necessary to act via Recovery - the "heart" of the operating system.
Turn off the machine with a button or by disconnecting the battery. Click "Start" and "add sound". Release the power to the manufacturer or vibration logo appears.
Instead of "volume up" there may be another combination depending on the model (specify the manufacturer's instruction or technical support manual):
In the list that opens, find the "Wipe Cache Partition" item ("Clear Cash"). After that, the phone will restart and turn on in standard mode.
Follow the full reset through the recovery
A full reset of the device is the complete cleansing of the Android apparatus when all user data and options installed after purchase are deleted. The smartphone returns to the state in which it was released from the manufacturer. This method is suitable if an unstable functioning phone does not allow you to open the menu or is constantly loaded into Safe-Mode.Hard Reset formats including drives and SIM cards inserted into a smartphone or tablet. Therefore, before disable secure mode on android, the necessary data should be reset to the memory card, computer or cloud storage, Contacts - on a SIM card or a special file. Both need to be removed. Purchased content and applications downloaded through Play Market. Or branded shop stores, you can subsequently restored by authorized in the account.
For full formatting You need to enter the "Settings" section - " Backup and reset. " Some models offer 2 types of reboot: with full phone cleansing and gentle. You need to choose, focusing on the degree of infection of the smartphone.
To reset in another way, enter Recovery. Sound swings highlight the Wipe Data / Factory Reset string, confirm the "Start" key.
The smartphone will go back in Recovery. The last action will be the choice and confirmation of the "Reboot System Now" item. Getting rid of all data, including malicious softwareThe gadget will boot in its usual working condition.
The methods described will work only if software failures lead to the download error. Some users noted that when trying to clean the device, it was again and again restarted, returning to Safe-Mode. If such problems appear the best choice It will be an appeal to a specialized service center.