WINDOVS 10 installer does not see the hard disk. Windows does not see the hard drive. Problems with the definition of a new hard disk before and after installing the system

Prepared computer K. windows installation 7 or XP, launched the installation process, but neither one did not appear in the disk selection window hDD Or his sections? The installer does not see any hard diskWhere could I install "seven"? The problem faced all users during the transition from XP to Windows 7. The reasons for its appearance may be several:

  • used as installation of windows The distribution is distributed without integrated drivers for the SATA controller (basic reason);
  • the power connector or the train deployed, so the hard disk is not determined;
  • you got a problem build Windows 7.

The article discusses possible reasonson which the XP and Seven Installer sees no hard drive with possible methods Getting rid of them.

Verification of reliability of compounds

Frequent cases when before reinstalling Windows The user disables one HDD. In this case, it is possible to accidentally hook a loop connecting second HDD. from motherboard or power supply. Before falling into a panic when the HDD is inoperable in Windows, or when no program with LiveCD or WinPE sees the hard drive, check whether the power is connected to it and the SATA loop is connected to it. If possible, connect a hard disk with a computer and power supply using other SATA connector plug and power cable.

No SATA driver

If when installing XP or "seven", the installer does not see the Winchester connected via the SATA interface, most likely to the image did not integrated the drivers for the SATA controller. Solutions in this case may be several:

  • downloading a new image that has enabled the SATA controller driver into the distribution;
  • integration of the corresponding driver into the image of Windows XP or "seven" manually with NLITE and VLITE, respectively;
  • manual adding missing software components that were previously downloaded for the installed version of XP or Windows 7 required bit.

In most cases, the easiest way. In addition to these cases, this method is applicable when the "curve" caught the assembly, the ISO format file loaded with an error (s), which is unlikely when using torrent clients, or has failed during copying installation files on a flash drive (possibly on it There are damaged sectors).

Integration Driver

Having installed program NLITE for XP (consider on its example) or its analog for "seven" called VLITE, in the distribution with installation windows files You can integrate the missing software.

  • Unpack the contents of the ISO file to any directory.

  • We download the SATA driver and unpack it.

  • From the available functions, select "Drivers" and "Boot ISO".

  • We click "Add", click "Driver Folder" and set the way to the catalog where the file is unzipped on the 2nd step.

  • We celebrate the "Driver test regime"And allocate all the lines in the following form.

  • Run the integration process.

  • Upon completion of the image creation, write it to the USB flash drive and check if the installer sees the hard disk.

If there is no desire to perform the above time-consuming procedures (and in the case of the "seven", the process will delay for a few minutes), adding the driver loaded in advance can be performed when Windows is installed.

  • Download the driver for the SATA controller. It is best to use the official resource for supporting your laptop or motherboard.
  • Unpack the archive on blood flash drive With Windows XP installation files or "seven" (this time we consider it in its example). As a rule, files are located in the archive for both winds of Windows, therefore you can unzip it onto the hard drive, and then copy the driver to the driver for the desired bit to the USB drive.
  • Load from the flash drive and perform all the procedures, as before, until we get into empty windowin which the hard disk or discs should be displayed and their sections.
  • Click "Download".

  • Indicate as the target directory, the folder where the driver for the SATA controller is located.

  • Click "OK".

After a few seconds, the hard disk and its partitions will be displayed in the usual window, after which you can select the desired volume and install Windows.

(Visited 25 741 Times, 1 Visits Today)

before that, we looked at the option when, that is, it does not respond to any of our actions, in the same article the computer turns on, but loading operating system Ends in an error, namely it is not possible to detect the installed hard disk. In principle, this malfunction is somehow connected with the hardware part of our computer, that is, with malfunctions and errors of the operating system itself or with incorrect settings . So our computer has been safely turned on, passed the procedure post but on the screen instead of greeting the inscription "" Non-System Disk "or" Operating System Not Found "says that the operating system cannot find system files necessary for its download. Let's consider all possible reasons for this error.

  • The most common incorrectly exposed in the BIOS priority of boot devices, that is, in the Setup BIOS menu in the parameters of the operating system responsible for loading, the first device is set up by either CD-ROM, the second hard disk, and in the drive in the drive this moment Loves N. boot disk or first boot device A floppy drive is set and in it is not a boot disco, they need to be removed and try to boot again.
  • It happens the disk in the drive no and the floppy drive is empty, in this case, the operating system for all the rules should be loaded, because the rigid disk is set and the operating system is located on it, but the download does not occur. In this case, you need to go to the BIOS parameters First Boot Device and install a hard disk as the first boot device. In this photo, we see that the first boot device is set to a hard disk.
  • Suppose it did not help and anyway, let's think further. If the hard disk is not determined at all in the BIOS, we look correctly and is well connected with us. We try to connect it to another controller on motherboard, Change the cable it happens, trying to download bIOS settings in optimal settings. How to do our article. If you have a hard disk "IDE" interface, see whether it is not turned off in Bios is given The controller, for example, it may be called "Marvell IDE Controller", if disabled, turn it on to save the settings and reboot.

Marvell IDE Controller state is enabled.

The hard disk may not be determined in the BIOS with incorrect jumpers configuration, switching hard drive to Master, Single, Slave, Cable SELECT mode. For proper connection You need to stick to the scheme located on the sticker of the hard disk, you can read our article

Jumper Hard Drive "IDE"

I had such a case, I changed the BIOS settings, rebooted, but the settings remained the same that is not changed. The problem was in the Sorted Battery CMOS, after its replacement, all my changes came into force.

Hey! And again, I did not write anything to the blog for two days, was busy. I bought myself a laptop, settled everything, transferred information from the old computer. Perhaps later, I will review the laptop, and today I will write about one problem that has arisen when installing Windows 7. The error that starts with the words "not found required driver Media. This can be a DVD drive driver, a USB drive, or hard disk ". I think it is not necessary to continue further.

It was not a clean image with Windows 7, it was an assembly in which only the bootloader was changed. According to the author, the image of the operating system has not changed. Well, if we talk about the error itself that everything is clear there, there are no drivers on the drive, USB, or hard disk, respectively, further installation of the operating system is not possible. The first time I met such a mistake and how probably everything, I decided to slip the drivers from the disk from the laptop.

At first I thought it was because I had a SDD drive, but I launched other programs on this disk, and they all found my drive. In short, pick up the drivers from the disk which was complete with a laptop, it also failed. The installer of them if I found, they did not fit him. I started going through the options, because of which this error may appear. Moreover, Windows 7 from another disk was installed, but I needed to install this assembly. And then I thought that the case could be in a slightly scratched disk, which I wrote to Windows 7.

I didn't have a new disc, but I had to come to me, whom I asked for a disk on the road. He brought the disk, I wrote down the image and run the re-installation and removed everything as the hand, no errors, in how.

So everything the problem was bad DVD-RW disk But when writing an image to which no warnings appeared, and when reading files, no errors except "not found the required drive driver" was not.

It means if you have an error "not needed the required media driver" in the process of installing Windows 7, and if more specifically, after selecting a language, it means you need to check the disk from which you are trying to install OS, and if there is an opportunity, then write a new DVD-R disk. I advise you to take DVD-R, and not RW. And record at low speed, but the second time I wrote the image standard windows tools 7. Learn more about creating boot disks, you can read in the article.

If the operating system image reissue recording did not solve the problem, then I have some more tips:

  • If you install Windows 7 from a flash drive, connect it to USB 2.0, because, in pure windows image 7 No drivers for USB 3.0. Or try to slip the driver for USB 3.0.
  • Try to insert a drive with drivers for your system and clicking on the "Overview" button, specify the path to the disk, possibly Windows 7 really can't find the driver you need. Disk with the image of the operating system at the time of installation of the drivers, can be removed from the drive.

Well, all, I hope you managed to solve this error. Good luck.

The brainchild of Microsoft Corporation is "Windows" - is incredibly popular, but even certain failures sometimes arise in it. One of these problems can be called the situation when Windows 7 does not see the hard disk. How to solve such difficulty, we will discuss today and discuss.

New name

Windows 7 does not see a hard drive for several reasons, consider them in order. First you need to perform a number of the following actions. Right key mouse

click on the "My Computer" icon, which is located on your desktop, and in the context menu, select the "Control" item. A window called "Computer Management" appears, you need to select the Count "Disk Management". We call the menu again by pressing right-click Mouses on the second point open window. Next, in the emergence of the menu, we appeal to the "Change of the Disc Letter". Sometimes it can also help if Windows 7 does not see second tough disk. Next, we rename the hard disk by changing the letter for the title.

Windows 7 does not see the hard disk when reinstalling

Under normal conditions during stable operation personal computer For transition

on Windows 7 with XP, we need to simply transfer "My Documents", as well as the settings of the previously installed programs by adding all this to content. system folder "Windows 7", then enjoy new system. However, from time to time the problem arises with the definition hard disks After reinstalling the system. There are several reasons for such a situation, as well as its permission. Next, we proceed to their consideration.

Windows 7 does not see the hard drive, and to blame for this motherboard

Probably conflict comes from the motherboard. It happens regardless of which version of the operating system you use. In this case, you need to download drivers for your computer motherboard and through the drive add them to the contents of the root folder of the operating system. Insert the disk with the necessary software For motherboard in your reader. At the same time, during the procedure for rebooting a computer, you may need to press the "F6" key. In some cases, Windows 7 does not see outdoor hard Disc, however, this may be associated with the problems of the drive itself.

Work with bios

In the BIOS settings, the parameter responsible for the operation of AHCI, shutting down this setting, You can achieve the definition of a hard disk. To this end, before loading the operating system, we call the BIOS by pressing the "F2" key or "Delete". Using the settings of the operating system, you must disable aHCI mode. If the problem described above did not solve the problem, we will integrate the SATA driver in the distribution of your operating system. Decide with the exact choice necessary updates And the driver will help us the official website of the manufacturer. At the same time, the type of the installed motherboard we can determine using the documentation that has survived after purchasing components to a personal computer or in the "Properties" section by clicking the right mouse button on the "My Computer" icon. A more common problem with which users of a personal computer may be encountered is the impossibility of determining the hard disk during the installation of the operating system. Let's start with the fact that when reinstalling either the primary installation of the operating system, various problems may occur, among which are identical to those described above.

Based on this, in the specified situation, you should also try to disable the AHCI option, turning to the BIOS, or integrate the motherboard drivers by adding them to the distribution on your personal computer. If the system still does not define the disk, you must check whether the connector of your HDD is connected correctly. Regardless of the used windows version You need to know that a special device, with which the hard disk connects to your motherboard, has two main connectors, one blue, the second - black. Blue connector works with external reading devices to which the CD drive relates, as well as the hard drive of the personal computer. Connect a hard disk to the blue connector, since the black often works unstable. If everything done did not help, probably, the driver was still false incorrectly.

There are cases in which a normally involved computer, after a normal loading process, it gives an inscription on the screen " Operating system not found". This can only be said that our OS could not detect the required system files to download. If in your practice you encountered this kind of malfunctions, then thanks to this instruction you can get rid of this problem.

The reasons for which Windows 7 will not be able to see the hard drive

You can call several reasons why the system does not see the hard drive:

  1. Hard disk has damage
  2. The main boot record (MBR) "Sector O" is damaged, or has errors.
  3. Incorrectly installed disk priority responsible for what disk the operation will be loaded.
  4. Also often happens that in Bios.your computer lies an error, and because of it there is no possibility to detect a hard disk.
  5. From hardware reasons you can call such: an interface cable that connects the computer and the hard drive is damaged, then it needs to be replaced and check. And for SATA. Best pick cable on which metal latches will be.
  6. If you only installed a new hard drive, and did not have time to prepare it and create partitions, Windows 7. It will not see him for sure. To solve this issue, just download the program Acronis Disc Director. And quickly divide our disc to sections. Just do not confuse disks!

Now let's try to solve the problem. To begin with, we need to find the item "" by clicking on the icon " My computer"Using the right button of your mouse.

Then in paragraph " Computer Management", Choose subparagraph" ". Further boldly press right-click required disc And here you already choose such an item like " Change the letter of the disc«.

Then definitely not mistaken. In order to change places two disks, you will have to rename them several times. To begin with, you will need to replace on any drive letter to unoccupied: Disk "D", for example, change to "x", and disk "E" - on "D", then you can already change former disk "D", and now "X" - on "E".

Windows 7 does not define the hard disk after reinstalling the system

Very often there are such cases when the hard disk after reinstalling OS ceases to be visible.Then helps with this problemthis instruction.

  1. If you have the case in which Windows 7. can not determine the hard disk due to the conflict emanating from the motherboard, then to start try to download the necessarydrivers for your computer motherboard. Save them to disk and downloadthese Drivers B. root folder Your OS. To do this, insert your drive with drivers into the drive and after restarting the computer, click " F6.«.

    2. Another way to solve the problem. During computer boot, you need to go toBios. (how to do it), and in the settings of the system itself, find the parameter responsible for shutdown.Ahci., and only when you disconnect this setting, then the hard disk immediately will be found. How to do it you will see in the pictures below.

    If it did not help you, then you need to do so difficult affairs as integrating driversSATA., or even you have to download entire driver packages. Also, there is a chance that the integration of all packages of drivers will help with their updates. And they need to be integrated into the distribution of the OS in any way of those presented below.

In order to choose the necessary drivers and updates, you need to go to the manufacturer's website of your motherboard (in order to quickly find out the model of the motherboard, read).

The solution to this problem is not so complicated, as it seems at first glance. In most cases, users who have been installed, or reinstall the operating system faced this problem. Do not immediately panic and call in service centres To call a specialist at home, first try in Bios.disable such an option as Ahci., then try to integrate all drivers for the motherboard in the distribution of your computer.

If the above does not help, then try to determine how the connector is connected. HDD.And how much is right. It is the device, thanks to which, it is possible to connect a hard disk to the motherboard, it has only two connectors - black and blue, which must be connected to the hard disk, as it works more stable.