Installing SSD in MacBook Pro 13. Installing SSD and Second HDD. Procedure for data recovery

Apple has always had no suggestive storage devices in their devices. And in the iPhone, and in iPad, and in MacBook, each step to increase the data media flies into a penny. And Apple's gigabytes are perceptibly expensive than the average level. There is no dispute, usually it is very fast gigabytes, and about the overpayment regret does not particularly fall. And yet sometimes the toad is choking. And you buy the option with a smaller drive. Hope to chant and somehow interrupt. But always, absolutely always come across the lack of volume.

In the case of iPhone and ipad problem Partly, and on relatively old McBooks (until 2016) you can change SSD. But in the case of using the original components, this is very not cheap. For example, a 256-gigabyte drive will cost 30 thousand rubles, if you take a new one, and at 18-20 thousand per used. Bite, you know. Meanwhile, "just SSD" is sold for 9-10 thousand. For 16-18 thousand, you can take a model on 512 gigabytes. Apple connector proprietary is by the adapter, which is about 1000 rubles on Aliexpress, and in Russian shops 2-3 thousand.

Opening showed ...

I will talk about my own experience with the MacBook Pro 13, the Early 2015 model. I got it with SSD on 128 gigabytes, which, in general, have enough, but still overthrown - suddenly it will be necessary to mount any incendiary video, and Place is not enough? I didn't want to spend 30 thousand for some reason. But with NOTOR SSD, everything is not so unequivocally. The fact is that Apple has its troubles, due to which the wheels of other manufacturers are seen by the operating system only after dancing with a tambourine, for turning on Trim also requires shamanism, well, there are still problems with hibernation, which you have to turn off.

In particular, such linings happen to Samsung 960 EVO, which is often bought for upgrade McBooks. I did not want to face like this.


It is even funny that SSD Samsung is trying to bite in MacBook, because, as it is easy to see, the original SSD (in the photo below) is made known by whom.

Deep google showed that one of the least problematic SSDs for MacBook Pro Early 2015 is considered to be Kingston KC1000. 240-gigabyte model (I certainly do not need more) worth an average of 8,500 rubles. For this, we get a drive with the stated read speed of 2700 MB / s, and records 900 MB / s. For comparison, the original SSD Apple gives 1200/700 to read and write accordingly. It is worth notifying that Kingston has a relatively slow record only on the younger model, and with 480 GB, it will grow up to 1600 MB / s. But I repeat, I don't need such a volume, and the overpayment would not have any point.

Considering that McBook did not please me to upgrade before, asked to help in this case guys from the Fixed.One service. Looking a little ahead, I will say that in the presence of special screwdrivers (five- and hexagonal asterisks), the operation can be performed at home.

Let's go. First unscrew rear cover And we admire - how inside everything is beautifully arranged. SSD is fixed by one cog. Easy movement - and slot is free.


Up SSD Kingston. with already installed adapter

The adapter came from China, it looks modest, but, on the other hand, it is not necessary to create miracles. There is no electronics on it - everything is limited only to the redirection of contacts from the Apple connector to the usual connector M.2. Something similar was with Sony proprietary cards: it very quickly turned out that the PSP portable console can be perfectly inserted by the usual microSD through a spear adapter.

This installation order is: first inserts an adapter into the connector, then the new SSD is in it. If a we are talking About the model of the model (for example, to terabyte), it makes sense to wind the place of contact with the thermoskusch for the reliability of the attachment and additional heat removal. But in our case it would be clearly unnecessary because this model Kingston is heated very moderately, and in a bundle with an existing adapter, he repeats over the board just above the original and perfectly contacts the thermal interface on the lid. In the length, the coincidence is complete, so KC1000 was recorded by a cantic from the predecessor.

When turned on, MacBook is expected to go on the absence boot diskBut after the flash drive was inserted with the High Sierra distribution, immediately saw a new SSD and offered to install the OS on it. Very important point: without updating to High Sierra, it is impossible to install a third-party disk, and the upgrade of the Operations should be done before replacing the drive.

Installation has passed without the slightest linings. That's real - even nothing to tell. After completion restored all data from the copy Time Machine On Flashke. It turned out to be significantly faster than by air, but still slowly relative to the possibilities of flash drive. It can transmit up to 300 megabytes per second, and the restoration went with an average speed of 20 megabytes, only sometimes rising to 40-50 megabytes.

Immediately after the restoration, Benchmark launched and, frankly, was pretty discouraged: according to his data, the speed of reading and writing was below 400 MB / s. At the same time, the speed of work was the same. Starting applications, switching between them - all. I had a suspicion that the case in the background tasks, which the system loads the disk, and in particular, the Spotlight Indexation Service. The latter works fiercely in the first days after installing a new drive, re-studying files, letters, contacts, etc., which leads not only to slower work, but also to increased energy consumption. You can disable indexing by entering the command in the terminal sudo mdutil -a -i off. But it is better, probably, just wait until the system is aware of himself again and calm down.

Actually, the next day, the benchmark showed completely different, more pleased numbers. This is not at the peak of SSD capabilities, but noticeably higher than on the original drive released, remind, three years ago.

What pitfalls may arise? First, with nonsense SSD MacBook Pro has a tendency to incorrect to wake up from the hibernation - stood and goes into reboot. I had this a couple of times, but only on the first day, when the filevault data was encrypted in the background. After his end (pah-pah-pah), everything became normal. If your problem is repeated, you need to type in the terminal sudo Pmset -a Hibernatemode 25. But best, as experts say, reset the laptop and set it up from scratch, and not to restore from Time Machine. Then there will be no problems with the exit from sleep. He himself has not yet checked, but I believe the connoisseurs.

Secondly, the drive can not work on full coil. This is stated in honest descriptions of adapters: more than 2 GB / C are not pumping. Plus, not all PCI Express lines can earn, for example, only two instead of the maximum four. I myself in the diagnostic utility are shown x2, then x4. It does not affect performance. And, by the way, I do not even know - maybe the original SSD also rope.

But in general, especially after the release of High Sierra 10.13.3, third-party SSD works decently, and if the adapter is lucky, you will save a very substantial amount. To be lucky, it is better to buy it in Russia and in companies that conduct preliminary testing of this kind of iron.

Many thanks fixed.one for help in the upgrade. Kingston KC1000 showed a complete suitability for use in MacBook, and taking into account the fact that maximum capacity They have 960 GB, someone will increase the amount of drive to a very impressive size with very reasonable costs.

Views: 10 673

MacBook Air. It was not intended to expand or update, but it turns out that by attaching small efforts, you can replace SSD on your own. This will significantly increase the size of the laptop repository and often its performance. Another common reason requiring the installation of a new solid-state drive is its breakage. In any case, the replacement of SSD on MacBook Air is easy, and the procedure remains the same.

Preparation

To install the new SSD, you will need several things:

  • new replaceable solid-state drive compatible with the available laptop model;
  • special screwdrivers (5T and PENTALOBE TORS);
  • 2-3 Small tanks for temporary storage of screws.

The SSD replacement process on the MacBook Air is quite simple, although it is disassembling and re-assembling Mac. It should be borne in mind that this method Apply only to laptops, time warranty service which have already ended. Replacement hardware It may cancel the warranty, so if it is still valid, you need to contact the Apple Support or Store, where everything you need will be done by professionals.

Step 1: Compatibility Check

First of all, you should make sure that the solid-state drive is compatible with concrete model MacBook Air. It usually depends on the year of the device, so it is important to know it. This information You can get in the menu item "On this Mac". Something like "MacBook Air (13 inches, early 2012)" or a similar message will appear on the screen.

After determining the exact name of the model and the year of its release, the solid-state disk compatible with it can be found on the websites of online stores, such as Amazon.

Step 2: Select SSD

The choice of brands and types of solid-state drives is large, and the user can follow their preferences. An example is a 240 GB TRANSCEND company update kit. It likes to users for several reasons: profitable price, High speed, excellent reviews, good warranty and availability of a full update kit that includes a case for an old SSD and screwdriver necessary to complete the work. Other brands also offer similar batch solutions.

Of course, you can absolutely free to buy another compatible SSD, which is not part of the kit. You just need to get appropriate screwdrivers and ensure the compatibility of the drive and Mac.

Other drives can be connected using an SSD adapter. MacBook AIR should be released no later than 2012, since from that time Apple has entered the data stream encryption between the solid-state disk and motherboard.

Step 3: Backup

Before replacing the SSD on MacBook Air, you must create a copy of the drive. Experts recommend at least set up backup Time Machine, and some more sophisticated users combine such a measure with the SuperDuper or Carbon Copy Cloner drive clone cloning tools. The only exception is the case when the disk has fallen or missing - it is obvious that there is nothing to copy here.

Connecting external diskYou must go to the system settings menu, select the Time Mashine option and specify the entry backup.

Do not skip this step. If the backup is not created, there will be nothing to restore, and new Disc It will not contain the necessary data. This is not the case that would like to experience. Using Time Machine also gives the advantage that you can perform a clean installation. operating system On the new SSD, and then restore Mac from the backup.

Step 4: Drive Replacement

Now the most interesting is the opening of the case and replace the SSD MacBook Air to the new one. To do this, you will need boxes for screws, because you have to deal with fasteners of different sizes and types. Fastening is better sorted by size and installation site.

This part of the process requires some skills. Users with experience in the field of electronics are likely to feel in their plate, but the others will want to familiarize themselves with the leadership in which the procedure is described in detail. Instead of to invent a bike, experts recommend familiarizing detailed instructions On the IFIXIT website, because they are accompanied by good explanations, detailed and comprehensive.

The main thing that needs to be done is to turn off the laptop from the power source, unscrew the bottom panel and remove it, disconnect the inner battery, and then change the solid-state drive. According to ifixit, the complexity of the 13 "MacBook Air SSD is estimated as a medium, but, according to specialists, anyone who has patience and the ability to follow the instructions, can easily perform work, even if it is a newcomer.

SSD Replacement Instructions

To replace the solid-state drive, it is necessary:

  1. Remove screws on the bottom macBook panels Air 13 and fold into separate boxes according to their size, types and installation site.
  2. Remove the bottom panel. Before touching the internal elements, it is necessary to discharge static electricity.
  3. Disable the internal battery. To do this, take a plastic holder attached to the battery connectors and pull it towards the front edge of the laptop. Do not forget about it, like the fact that it will need to be connected again upon completion of the installation.
  4. Remove SSD, previously unscrewing his screw. The device is in the center, right above the battery.
  5. Install a new solid-state drive, secure it with a screw, and then connect the inner battery.
  6. Wear a bottom cover and consolidate it.

Once everything is returned to the place, you can start installing software.

Step 5: X and data recovery

The procedure described here is slightly different from the sequence of actions specified in some other technical guidelines. In this case, an empty solid-state drive is installed, which then requires the installation of the OS and the data recovery. Others advise before replacing SSD in MacBook Air, copy the disk contents. Additional cloning is often the best approach, but in the event of a drive breakdown, it is impossible, as it becomes completely inoperable, which is confirmed by the question mark when loading and the apple equipment test.

Fortunately, the presence of a backup of Time Machine allows you to install and restore differently. If preference is given to the cloning method, Carbon Copy Cloner and Superduper are applications that will greatly cope with their work.

Procedure for data recovery

The first option includes two stages: performing clean installation of the operating system using a bootable flash drive, and then restore a backup with Time Machine during installation. It works perfectly. It must be remembered that the restoration of the backup SSD disk MAC.Book Air can be started immediately after the clean installation of Mac OS X.

To do this, connect a disk with a backup of the data and turn on the laptop while holding the COMMAND + R buttons. On the Utility screen, you must select "Restoring a backup" and click "Continue". When specifying a disk with a copy, you need to select it date and time. Upon completion of the copying process, the laptop will overload.

You can also try to use Time Machine directly. But this means that you need to manually manually create a recovery section, and you can encounter errors section EFI. These problems can be avoided if you pre-perform clean installing MAC. OS X.

After the operating system and the data are restored, the laptop is ready for normal operation with the new SSD.

We all know that the computer or laptop consists of many details and one of the most important things is hDD, or as it is also called HDD. Of course, all the details are important in MacBook, but if a speaker is broken or a microphone, it can still be survived, and loss hard disk unlikely. Mack simply won't boot or work very slowly. All other HDD are susceptible to wear and aging, so one of the most popular reasons for accessing services is replacing hard disk on MacBook.
On MacBook Air and Pro Retina. Solid-state drives are used, I will write a separate article about them - Replacing SSD MacBook.

The second reason for handling the replacement of HDD is an upgrade. In this case, clients either lack the amount of memory or more fast disc - SSD. In this article, we will look at both reasons and tell about some nuances of the hard disk replacement on McBook.

Replacing a defective hard disk on MacBook Pro 13 or 15.

For us, people are addressed daily, who, for various reasons, fails MacBook and is not rarely connected with hard disk. HDD in any MacBook Pro or Air model is one of the most vulnerable and fragile parts. There are many factors that adversely affect the performance of HDD McBook and we will highlight the main:

  • Voltage jumps and as a result, incorrect disk shutdown;
  • Operation of MacBook Pro in extreme conditions (vibrations, falls, etc.);
  • Wear or simply speaking ordinary aging;
  • Factory marriage (such a problem is rare).

Tip: To extend the life of the HDD before transporting, turn off the McBuck. In this case, the power is not served and the mechanical parts of the disk will remain alone.

Symptoms of faults are usually like that:

  • MacBook does not boot or loaded for a very long time;
  • The system hangs and works slowly, Mac slows down;
  • Some files and folders, file system errors do not open.

What to do if at least one symptom you know? If the computer still loads and works, then first try as quickly as possible to copy all the important data on external carrier or flash drive. When the data is safe, you can try to check the HDD using the Smart Utility utility. If it shows the errors in the "Bad Sector" section, you can prepare for the replacement of the hard disk on the MacBook. If there are no errors, then try reinstalling the system, should help.

Replacing HDD on SSD in MacBook.

Quite often, SSD is changed to increase the speed of the laptop. If the poppy slows down and slowly works, then the upgrade can become salvation. Judge yourself - the reading speed and recording of a conventional hard disk in different tests reaches from 50 to 150 MB / s. SSD values \u200b\u200bof these parameters reach up to 500 MB / s. Thus, the SSD drive runs from 3 to 10 times faster than hard.

In practice, if in MacBook Pro 13 or 15 (A1278 and A1286) to put instead of the SSD HDD disk, then the system load from the off state will take about 23 seconds. Agree, the result is very good. Loading programs will also occur at times faster. If you used to read all the names of the creators of Photoshop, now you have hardly done it;)

In addition to installing the SSD instead of HDD in MacBook, you can install an additional disk instead of a CD drive. This is done with an adapter called OPTIBay. Most optimal option From the point of view of finance and space, this is the installation as the main SSD disk for 120-240GB, and the actuator CD hDD installation On 500 GB-1 TB, while you can use the old disk if it is working. Replacement HDD on SSD in macBook Pro. Give your old poppy a second life.

Replacing the disk in iMac (aimak)

Despite the fact that Aimak 21 ", 24" or 27 "(models A1311, A1312 2009-2011 and A1418, A1419 2012-2015) stands on the place of disk wear, it is also not alien to him, but there is one important nuance. If any 2,5 laptop discs are suitable for MacBook, then the IMAC disk replacement is possible only for a special "native" disk. But it's all about the temperature sensor. If you install a conventional hard disk, then after replacing HDD, the fans will start working at the maximum and is unpleasant to noise. The IMAC upgrade using the SSD installation is also possible, only a bit different order. Due to the SSD temperature sensor, the IMAC is installed instead of a CD drive (or in the Mini-PCIE slot for models since 2012) and not vice versa, as in the case of MacBook. Otherwise, the technology and speed are similar.

Disk Replacement in Mac Mini (Mac Mini)

Replacing a disc Mac Mini. happens just like on MacBook. It is quite suitable for any 2.5 "disk. Installing SSD. It happens similarly to the CD drive through OPTIBay.

How is the replacement of HDD or SSD on MacBook

As a rule, the main condition when replacing the hard disk on MacBook is to save data, because in terms of the information value is valued more than the laptop or at least on the exactly with it. Here 2 options are possible - you can throw off on the external media or flash drive to folders, or make a copy of the system using TimeMachine. In the second case, all the system settings are copied along with the programs. When all data is reliably saved, you can start repair.

We produce assembly B. reverse order. There should be no extra bolts;) When the replacement of the HDD MAC is completed, you will need to install the operating system and you can use the Mac and enjoy life.

If you are too lazy, once or just don't want to bother, then we can do it all for you, starting with data saving (if possible) and ending with a hard disk or SSD installation or upgrade. By time, all procedures usually occupy from several hours to one business day. You can read the table below. If you have any questions, you call or write to us by mail, try to help you;)

MacBook's hard disk is quite fragile, so its breakdown is a frequent cause of access to service centers. Winchester may fail with a laptop drop or impact, short closure on the network.

The main "symptoms" of the hard disk breakage are as follows:

1. The operating system is not loaded (a question mark appears on the screen);

2. The laptop refuses to turn on;

3. Failures in the operation of the operating system (the appearance of strange characters, errors when opening files, etc.);

4. Strange noises, screens, clicks when working as a laptop.

The user may want to change and sound hard drive - if it wants to increase the volume of the hard disk and the speed of the system. In any case, it should be borne in mind that the procedure for its replacement is quite complicated, and it is better not to take it on its own.

How is the hard disk replacement?

1) A specialist removes the laptop battery and spins the screws that hold the compartment cover with the RAM.

3) You must disconnect the keyboard panel. The difficulty is that it is held by latches from the inside, and if they act inactively, you can damage fasteners, get used or scratch the panel. Usually, to remove the keyboard, use a thin screwdriver.

4) The next step is to disconnect the belt cable from the motherboard.

5) Finally, you can shoot the old hard drive. To do this, the wizard disconnects the cable that serves the hard disk power and going to the SATA plug, and turns off the retaining bar.

6) Having installed a new hard drive, the specialist carries out an assembly. Since the MacBook case is very thin, it is easy to drive, so only the master who knows the architecture of Apple's laptops will be able to implement all the procedures without damaging it.

The advantage of the appeal B. service center MacSave is the ability to order original parts that are best compatible with your laptop model.

Online store of spare parts and tools for Apple.
Today we will tell you how to save on the SSD upgrade of all Mac computers after 2013. As you know, the company OWC has released new discs, up to 1 TB with a PCIE interface and Apple proprietary connector. Disk speeds for such a protocol are not large: up to 763 MB / sec reading and 446 MB / s Recording, however PCIE 2.0 allows you to achieve much higher speeds. Yes, and the price for 480GB is almost 30,000 rubles with delivery from the USA, and in Moscow from 44,000 rubles.

Recently kingston company Released PCIE 2.0 SSD discs with a M.2 connector. Meals too that Mac computers, but the connector is another. The task is delivered, the drawings are drawn, months of expectations and the necessary adapter are already in our office. It remains to install the disk through the adapter and test.

Brief Instruction Installation SSD Kingston M.2 in MacBook Retina. 13 "2015.

Step 1
- unscrew 10 PENTALOBE * 1.2 screws with screwdriver
- Note, the screws differ in the form and long, in the assembly process, return everything to your place

Step 2.
- Remove the plastic lining from the battery connector

Step 3.
- Turn off the accumulator loop from the motherboard with a shovel

Step 4.
- Now that motherboard de-energized, unscrew the screw T5, which is fastened by a regular SSD disk


Step 5.
- Gently remove under a small angle SSD

Step 6.
- Preparing new SSD more volume with adapter and put in the connector, it is perfect in size

Step 7.
- Install our disc with the adapter and collect a laptop in the reverse order


Step 8.
- Install the clean OS X from the flash drive and test the new disk

After installing the operating system, you pass the Blackmagic Disk Speed \u200b\u200bTest test. The results of Windows on the screenshot. The recording speed in some moments reached 561MB / s, and the read speed of over 1GB / s. What gave us all this? New SSD volume 256GB disk for Mac devices PCIe recent generations It costs from 25,000 rubles, and this will be a disk without any warranty, since Apple does not sell such discs, this disc will be with a parsing or used. We, with the help of a magic adapter, installed the Kingston SHPM2280P2 / 240G 240GB drive (the price of Yandex Market on the date of publication from 11730 rubles). Total savings of over 10,000 rubles, taking into account the value of the adapter, as well as 3 years of the manufacturer's branded guarantee on the SSD disk.

Subscribe to our blog to the site, we will pamper you with new articles about unique upgrades and apple repairs Techniques