How to unlock the Blocked RAM on BIOS 211. How to open all BIOS settings. The utility is suitable for data of BIOS versions.

User's question

Hello.

Tell me, faced a problem. In general, I wanted to reinstall Windows, went into bIOS settings, changed them. And now my computer is loaded: I can not new system Install nor old download. How to return the settings in the BIOS to the factory, how to reset them?

Good day.

This question is not uncommon, quite often not experienced users, changing any parameters in the BIOS faced with the "problem" work of the PC, and the need to return everything in the previous state. In some cases, reset the settings to the factory is simple enough, in others (when, for example, a password for the entrance to the BIOS) - Make it is very difficult!

In this article I will try to consider several typical cases to solve such a problem ...

In general, reset the BIOS settings, most often, falls in cases:

if the computer stopped working steadily, and the nature of the reasons is not clear;
if you cannot enter the BIOS, as it asks to enter a super administrator password;
if Windows is not loaded (often after adjusting the load queue);
if you are engaged in the processor acceleration, and want to return frequencies to optimal and safe.

Us Menu to BIOS // Load Defaults BIOS

The easiest I. fast way BIOS settings reset is to use the special menu to set up the BIOS (I apologize for the tautology). The menu it is absolutely in all versions of the BIOS, most often in the section EXIT.. I will consider the question of steps.

1) First you need to enter the BIOS.

Usually, the button for logging in the BIOS menu is written when the computer / laptop is turned on (try reloading your computer to see the first greeting screen). Most often - this is some button from: F2, F10, ESC, DEL (99% of devices support these keys).

You may use my article with buttons to enter the BIOS and Boot Menu. W. different manufacturers PC and laptop -

By the way, the buttons for entering the BIOS settings are usually indicated to the documentation that went along with your PC.

2) load secure settings (default / factory settings)

In general, give universal settingswhere in which bios is the desired tab for resetting settings - it is impossible. But in most cases (in 99%), the desired tab is either on the first screen (the main thing you see when entering) or in the section EXIT..

For example, the screenshot below shows the Award BIOS (one of the most popular), in which there are two tabs for resetting the BIOS settings: Load Optimized Defaults, Load Fail-Safe Defaults. You can use any. After the settings reset, do not forget to save the parameters - the F10 button.

Below in the photo shows an excellent version of the BIOS - here the desired tab "Load Defaults Bios" Located in the section EXIT. . After resetting the settings - click on another tab - "Save Changes and Exit" (Save changes and exit).

In most cases, this method can be quickly and easily reset the BIOS settings, but in some cases this method It will not work (most often when the password is installed on the BIOS settings, and you forgot it or do not know).

Note!

Many laptop users, after resetting settings, face that the device is not loaded (most often, the type error is issued "Operating. System Not. Found »).

This is due to the fact that the download mode has been changed. Boot Mode.was Legacy, and became a UEFI. To fix it, in the BIOS settings you need to change the UEFI on Legacy, just turn off the mode fast download Fast Boot (usually done in the section Boot (download settings)).

An example is shown in the screenshot below: left (it was after reset), on the right (it became after the settings).

With the help of jumpers on the motherboard

An example for laptops will be shown at the bottom of the article ...

On almost any PC motherboard, there are special jumpers for resetting BIOS settings. There is such a jumper next to the battery that feeds the CMOS memory. Usually, by default, it is in mode 1-2. To reset the BIOS settings - put a jumper into 2-3 minutes for a couple of minutes (see photo below).

Important! This operation must be done when the computer is completely turned off. Disconnect all wires and plug from the system unit!

The photo below shows the jumper used to reset the BIOS settings.

Note: The jumper may be called differently. For example, CLRMOS1 (as in the photo above), CLRTC, Clear CMOS, CCMOS, Clear RTC, CRTC ...

If there are no jumpers ...

On some motherboardsah may not be jumpers at all. But then, usually, there is either a special button to reset parameters (called CLR CMOS), or there will be simply two contacts that need to close a screwdriver, or any other metal conductor (there are contacts near Clear CMOS inscription).

Important! Close contacts or press the CLR CMOS button when the PC is completely turned off (and the cord is disconnected from the outlet)!

The photo below shows how the CLR CMOS button looks like on the mat. PC card.

Addition! If you have the documentation to the PC / laptop - it is almost always contained this information (look for the BIOS SETUP reset section). Perhaps, only in cheap Chinese devices of this information may not be ...

Using the battery on the mat. board

A little higher when it came about the jumper, I mentioned that it was easiest to find it battery. It reminds us a conventional coin (in its size, unless it is thoroughly 2-3), on which, usually, you can see the word "Battery" . As a rule, it is bright and transfusional when looking at the motherboard from above - immediately striking.

So, thanks to this battery, when you turn off the computer, he still remembers the settings in the BIOS, knows the time, year, month, etc. Those. It all happens and saved due to this small battery - it provides independent meals. As a rule, its energy is enough for 10-15 years of work PC (sometimes even more). Thus, its shift during the use of the computer is practically not needed (for 10-15 years your PC is obsolete, and you change it to a newer) ...

To reset BIOS settings - You can simply take out this battery and wait 15-20 minutes (better than half an hour for reliability). This is such a simple and fast way!

The photo below shows 2 samples, as the battery looks like on the mat. board.

Note! Note that the date and time and other settings that you need to set will be reset, after the PC is turned on

Important! Having a battery is necessary in a fully turned off PC and disconnected from the power supply.

Reset password and BIOS settings on laptops // Step-by-step analysis

In principle, all of the above is relevant for laptops, though with some reservations.

First, the laptop is not so easy to disassemble, especially some models (but often the necessary jumpers for reset are located under the lid protecting rAMeasily open from the back side of the laptop).

Secondly, not always after removing the battery laptop "forgets" old passwords (some models have another non-volatile memory, which in principle cannot be disabled in conventional ways). In some cases, without a service center can not do.

Some moments will consider below.

The photo below presents the message appearing on the laptop after switching on. Without entering the password, the laptop will not turn on ...

Method 1 - Contacts / Jumper

In general, give a universal council for each model laptop - unreal! In the article below, I will figure out a typical Acer laptop and show on the example, how to reset its bios. In principle, the key difference can only be in how to disassemble the laptop, and where the jumper and the battery will be located on the mat. board.

And so, proceed ...

1) First, turn off the laptop and turn off all the cords from it: meals, network, mouse, etc.

2) turn it over and remove the protective covers: from RAM, hard disk. Also shoot rechargeable battery (See photo below).

By the way, pay attention to the fact that the battery on laptops is usually held and fixed a pair of latches. To remove the battery simply unlock them.

3) further remove the RAM strips and hDD (because Usually under them or the cherished contacts or jumpers will be rented). Usually, the contacts that need to be signed are signed as JCMOS (or Clear CMOS or something like this).

Note! Before removing the RAM on the laptop, open the "mustache" that fixes the planks. Many of this do not know and hurry to remove the bar.

Note! If you closed the contacts, and then all collected and BIOS did not drop, you need to do the following. Close the contacts and do not release them: in parallel, connect the power cord to the laptop and turn it on (for 20-30 seconds). Then turn off, and open the contacts.

Method 2 - Battery

1) by analogy with previous way: Disconnect the laptop, turn off all the cords, and turn the laptop. Remove the battery, protective covers. Then you should see (or not to see - it depends on the configuration of your laptop) a round small battery (in the photo below it is shown by a green arrow).

2) It is gently removed with a small straight screwdriver. We are waiting for 15-20 minutes, then put in place and collect a laptop.

3) Include and check. In 98% of cases, BIOS will be reset!

By the way, in some cases to get to the battery you have to fully disassemble the laptop. In general, there is nothing difficult in this, but this operation requires great accuracy, because Many thin wiring, which can be easily damaged. For example, the photo below shows laptop Acer., the battery to reset the password is under the keyboard ...

Method 3 - Spec. Utilities

For laptops there are another an effective way To reset the BIOS, including on which the password is worth. We are talking about special utilities To reset the password, often they are made by various enthusiasts (Naturally, there is no official support, so their use is on your own risk!) .

For example, for laptops Acer has specials. utility Clnpwd. (The developer is not Russian-language, unfortunately). It is on her and show how to work with a similar software.

Also need another utility - HP USB Disk Storage Format Tool (It is quite popular).

1) the first thing you do - insert a USB flash drive to the USB port and run the utility HP USB Disk Storage Format Tool.

2) Then you need to select the inserted USB flash drive, specify file System (FAT 32), enable fast formatting (Quick Format), put a tick opposite using a dos startup disk and specify the folder with the DOS version you want to write down (it is recommended by the developer CLNPWD).

3) Then copy the file itself on the USB flash drive (i.e. clnpwd.exe).

4) Reboot the laptop and open Boot Menu (in Example below the F12 button). Usually, the button for logging in Boot Menu is displayed on the first screen after the PC is turned on.

5) Choose a flash drive with which we want to boot.

6) Actually, the last step is to run the utility clnpwd.: Just enter CLNPWD and press ENTER. Next, the utility will ask you that discharge:

Digit "1" - delete user password;

Figure "2" - deleting a super administrator password.

Note! For different brands of laptops (and even models) - you need to use your utility. Also, again I will prevent you that you use them at your own risk. Officially, no one has been tested, and the manufacturer does not give a warranty (by the way if your device is under warranty - this method can cause a refusal from it).

In general, I have everything on this. Successful and fast reset!

Bios. - This is the first thing that runs your system when you turn on the computer. It contains a number of equipment configuration parameters that can be changed using the setup utility. Bios. exists on our computer since DOS. - Disk Operating System. The main tasks in modern PC are initialization and testing of hardware components of the system and loading operating system From the storage device.

The discharge procedure is the same for desktop PCs and laptops. You just need to follow the instructions given in this article.

There are three of different wayswhich you can try to make the BIOS to the default state and understand it, how to reset the password on windows 10/8/7:

Reset using the internal tuning of the bios.
Reset with help BIOS JUMPER..
Battery Reset CMOS..

Let's start with the first method. If he is not suitable for you, try others.

Method 1 # - How to Reset Password through BIOS.

This is the easiest way to reset the BIOS settings to the factory. It may not be suitable for everyone, because if the BIOS on the computer is very "damaged," you may not get to set up. If so, simply go to the next way.

So, to open the BIOS on the computer, you will need to press the key. Delete." or " F2." on keyboard. If these keys do not open it, try finding the desired buttons on the official website of the manufacturer of your PC.

After the settings appear, you will need to find the option " lOAD OPTIMIZED DEFAULT." or " load Setup Default." After you find it, just press ENTER. After that, the BIOS will be reset. Below are screenshots, from different versions of the BIOS.

Method 2 # - Reset with BIOS JUMPER..

Other good decision, « how to reset the administrator password"It is a closure of BIOS or CMOS jumpers. Yes, short circuit, for BIOS jumpers for 10 seconds, you can disable your BIOS password and reset the settings too.

Usually you can find this jumper next to your CMOS battery or, next to the BIOS chip. It is called CLR_BIOS. or CLRTC.. It looks like the image below.

So now you need to disassemble the computer and find this jumper.

Disconnect the lid and move it to position 2-3, as shown in the diagram below.
Wait 10 seconds.
After that, return the metal cover to the 1-2 position again. In the laptop you just need to shorten this jumper with some metal wire.

After a short circuit, the BIOS will be reset. Now, assemble the case of your computer and run it. Just in case, you can restore the settings as in the # 1 method.

Method 3 # - How to reset the password on a laptop using a CMOS battery.

All CMOS and BIOS settings are saved in the chip that is smeared on the motherboard. The main work of the CMOS battery is the continuous power supply of the chip to save all settings on it.

If you disconnect or extract the battery for about 5 seconds, the chip will stop receiving energy, and the settings will be reset to factory.

Guide, on how to reset the password on Windows for a personal computer:

Step 1 - Disable all power connected to your computer, I mean the power cable.

Step 2. Open the computer housing

Step 3 - Disconnect the CMOS Battery.

After detecting the battery, simply disconnect it or remove the battery for 5 seconds:

Step 4 - Tighten the CMOS battery connector using a metal wire, because on some Motherboard models, backup power for BIOS Chipset is carried out using a condenser. We need to remove it to remove the residual power supply. I hope now, you understand how to reset the password on Windows.

Manual, on how to reset the baios password for a laptop (how to reset the bios password on a laptop):

Step 1 - Disconnect all power sources that are connected to a laptop and battery including.

Step 2 - Disassemble the laptop and find the CMOS battery, which should be attached to the laptop motherboard. Look at the video of the laptop disassembly on the Internet to find out where your CMOS-battery is your laptop. On different models, its location may differ.

Note. If you do not know how to disassemble the laptop, then watch the video about your laptop on YouTube or on another website. It is best to search on the official website of the manufacturer. This will help you, understand how to reset the password on Windows 10.

Step 3 - After detecting the battery, simply disconnect it or remove the battery for 5 seconds.

Step 4 - Tighten the CMOS battery connector using a metal wire, because on some Motherboard models, backup power for BIOS Chipset is carried out using a condenser. We need to remove it to remove the residual power supply.

Step 5 - Install the CMOS battery back and assemble the computer case.

In contact with

Instruction

Try first the most trivial way to gain access to the BIOS settings. Start by selecting the "Restart" item in the main menu of the operating system of your computer. When the operation of the OS is completed and information messages will be held on the screen to check the computer "iron", press the key assigned to the login command in the BIOS settings panel. In most cases, this should be a DELETE or F2 key, but sometimes manufacturers include their fantasy and compound whole combinations - for example, Ctrl + Alt + Esc, Ctrl + Alt, Ctrl + Alt + Ins. You can see the exact value for your version in the information inscription in the lower left corner of the screen - it will appear for a while after passing post requests.

Open all the settings immediately in the BIOS panel will not work - they are too much for one screen. Therefore, you will have to choose one of the sections and consider them by groups, and sometimes even go to the subsections, which can also contain invested sections.

If after pressing the input key to the panel on the screen will appear to enter the password - do it. In the case of its absence, you will have to reset the BIOS settings to the values \u200b\u200bto reset set password. To do this, turn off the computer and disconnect the power cord. Remove from the housing side panel And find a jumper on the motherboard, near which the inscription CLR_CMOS or CCMOS is etched. After removing the jumper and rearrange it to another position, you reset the password with all the BIOS settings. You can not touch the jumper, but to remove the battery from the motherboard - this is a "tablet", which should be placed near this jumper. Pull it out of the nest and after 10 minutes set to the place.

If in base system Computer I / O is blocked part of the settings and you want to remove the blocking, weigh the ratio of possible benefits and losses. First, this operation requires a certain qualification, and secondly, it is possible that these settings are blocked because the installed version of the motherboard is calculated only on fixed - unregulated - the values \u200b\u200bof these parameters. These two risk factors can lead to the failure of the processor, memory chips, or motherboard chipset.

Use the software from the manufacturer installed in the BIOS computer if you decide still unlock the inaccessible settings. With it, you need to make changes to the source code ("Possy"), making a copy, and then replace the original version of the upgraded ("PROPARGRAGE"). Required programs And their descriptions are best searching on the websites of manufacturers on the Internet. Can help with definition set version And the selection of the right editors for her applets installed on the site http://wimsbios.com.

The most common way to reset or clean the BIOS password, which most of us know is the physical de-energization of the computer by disconnecting all cables and extract the battery from the motherboard for several minutes.

Another way how to remove password with bios - Switch the CMOS jumper on the motherboard itself, if present. These methods work, because in most PC motherboards and a number of laptop motherboards to maintain BIOS / CMOS settings used battery. If you turn off the power, the BIOS / CMOS settings and password will be deleted.

If for some reason you cannot reset the computer's BIOS security password, deleting the battery or switches the CMOS jumper, here are some options that you can try.

Beckor Passwords by default

Before using the tools that are trying to reset or make changes to the BIOS, it is worth seeing if some of the famous backdors or passwords are default. Click the link below to view the list of all known backdoor passwords. Before removing the password from bios on a laptop, note that passwords are sensitive to the register.

Standard Bios Backdor Passwords

If you can download Windows

CMOS DE-ANIMATOR is a more modern tool compared to most tools. It can reset the BIOS password from Windows. Latest version CMOS DE-ANIMATOR 2 is compatible with both 32-bit and 64-bit operating systems.

All you need to do is run the instrument on behalf of the administrator ( click right-click Mouse and select the menu item " Run on the name of the administrator» ) and click the button " Proceed", Then restart the computer. When the PC is loaded, you will see the CMOS checksum error and you can access the BIOS without a password. The principle of work CMOS de-Animator is that it makes invalid control sum System CMOS. This leads to the reset of all settings to default values \u200b\u200band clears all BIOS stored passwords.

CMOS DE-ANIMATOR includes a backup and recovery feature. This provides an additional security guarantee. If something when the password reset goes wrong, the data is saved to a file with the .Dea extension. The authors of the program warn you about possible problems when using it on laptops. The program sometimes causes erroneous response of anti-virus software and warnings on sites such as Virus Total.

If you can not boot from hard disk or CD

How to remove the bios password on notebook Samsung? Turning off the power and removal of the battery from the standard of stationary computers for several minutes should remove the BIOS password. But this is much less likely to work on a laptop. For more security, passwords for BIOS laptops are usually stored on a separate EEPROM chip, which does not depend on the BIOS battery.

If you entered the BIOS password on the laptop several times, a message appears on the screen that the laptop is blocked. You will see something like " System Disabled." or " Password Check Failed. System Halted"And a few digits. If this message appears when you enter the BIOS, you can simply turn off the power and then try to enter again. Pay attention to the number because it is valuable information. It is required to generate a backdoor password to the BIOS.

All you need to do is burn the appeared number, and then go to the web page BIOS MASTER PASSWORD GENERATOR. This site is intended to obtain possible passwords based on the entered number. Just enter it and click. Then check the results and mark all passwords that are close to your laptop model.

Before removing the password from the bios on the computer, try the codes for the locked BIOS to check whether it works. Depending on the laptop model, after entering the code, you may need to press ENTER or CTRL + ENTER. The codes used are based on the work of the specialist " Dogbert.", Which conducted a lot of research and created a number of small utilities, as well as Python scripts to unlock various laptop models.

If the codes received on this site did not help you, visit the Dogbert blog, where you can find more detailed information About the brand of your laptop and upload a separate utility for it. To use one of the programs, download the utility and run it, then enter the number and press ENTER. You will receive a master password, with which you can try to unlock the computer.

You must run a master password on a computer that can boot under Windows, and which is installed .NET. If you do not know which tool to use, you can try everything until you find the one that matches your laptop.

If you can boot from CD / USB

When Windows is not loaded properly, and there is no way to enter or USB is already installed with a higher priority. In this case, you need to insert a CD or flash drive and the device will boot from them automatically. Also for downloading from a CD or USB drive a lower priority can be set than for hard disks. In this case, you will need to temporarily disable the hard drive.

How else to remove the password through the BIOS? If you have access to Windows, another solution that allows you to download from CD / USB is a tool called Plop Boot Manager. It makes it possible to download from these media, even if the BIOS does not support this feature.

Here are some tools that can be used when booting from a CD or USB flash drive.

PC Cmos Cleaner

Designed to restore, delete, decrypt and display a password of a user or super user stored in the BIOS, regardless of the brand of the device. The list of supported BIOS includes Award, American Megatrends (AMI), Compaq, Phoenix, Samsung, IBM, COMPAQ, DTK, Thinkpad, Sony, Toshiba. So there is a high probability that your BIOS is included in this list. PC CMOS Cleaner is a bootable Linux CD, so you do not need to worry about the compatibility of the operating system.

When starting the program will first try to decrypt and display the list. possible passwords. In case of failure, you can delete the password using two parameters, the second of which will completely reset the BIOS parameters to the default values \u200b\u200b- later you will have to reconfigure them.

Download PC CMOS Cleaner

CMOSPWD from CGSecurity

This is one of the most modern and popular CMOS decryption tools, although it was released for quite a long time - in 2007. CMOSPWD decrypts the password stored in CMOS and displays it. The following BIOS are supported:

Acer / IBM BIOS;
AMI BIOS;
AMI WinBIOS 2.5;
AWARD 4.5X / 4.6X / 6.0;
COMPAQ (1992);
COMPAQ (new version);
IBM (PS / 2, ACTIVA, THINKPAD);
Packard Bell;
Phoenix 1.00.09.ac0 (1994), A486 1.03, 1.04, 1.10 A03, 4.05 Rev 1.02.943, 4.06 Rev 1.13.1107;
Phoenix 4 Release 6 (User);
Gateway Solo - Phoenix 4.0 Release 6;
Toshiba;
Zenith Ami.

With CMOSPWD you can also remove the password from the bios on lenovo laptop Create backups, restore, erase or even completely clean CMOS. When downloading, select item 9. NEXT- 2. BIOS / CMOS Tools- 2. Bios Cracker 5.0 (CMOSPWD). There is also a version that you can run from Windows.

! Bios from Eleventh Alliance

Allows you to execute backup and restoration BIOS. . There is even a blaster option, with which you can clear certain parts of the BIOS, with the calculation to remove the password - a powerful and potentially unsafe version, since it can damage the BIOS. ! BIOS can crack passwords used in some common BIOS versions, including various versions of IBM, American Megatrends (AMI), Award, as well as Phoenix. This is an old tool that appeared in the late 90s, so it is unlikely to work effectively on modern computers.

The BIOS software code (Basic Input / Output System) is born in developer laboratories.
The most famous of them are Award and AMI.

Then each manufacturer of motherboards adapts the BIOS to specific model And at its discretion, it turns off (blocks) specific functions.
Moreover, many functions affecting the "thin" configuration of the BIOS may be blocked, and from which, in turn, the performance of the computer depends.

Why do maternal manufacturers block some functions?
First of all, this is done in order to simplify the Setup BIOS setup procedure.
Disconnect those functions that are absent in a particular motherboard, but can be used in the following modifications.

Using special software (utilities), you can unlock almost all disabled features and options in the BIOS.
After modifying the results must be saved in separate file And then make a BIOS update.

When downloading SETUP BIOS on the monitor screen, you can see new additional features Settings.
For each company you need your utility.

The owners of the Award BIOS will need a Modbin utility, and for those who have AMI BIOS installed on the computer, you need to download the AMIBCP program.
Interesting is the fact that the AMIBCP utility is developed by the programmers of the AMI company itself.

Practice

First of all, you should prepare the necessary software.
For a modification, the utility will be required to update ("flashing"), a file with a valid version of the BIOS and a utility for modification.

The utility for the "firmware" can be found on the Internet on the website of the manufacturer's motherboard or on a CD attached to the "motherboard".
After that, it must be copied to the hard disk of the computer.
The file in which the current BIOS version is posted using this utility.

BIOS modification utilities can be downloaded from the Internet.

As an example, consider the case when AMI BIOS is installed on the computer.
As for the BIOS from Award, the principle of modification is similar, and in this article will not be considered.

The AMIBCP utility is a DOS program and without any problems loaded under Windows without rebooting into MS-DOS emulation mode.
AMIBCP volume (file amibcp75.exe.) The unpacked form is 542 KB.
After downloading the AMIBCP utility, you must enter the file name containing the BIOS, for example, 7vr_f4.bin. .

Next, while in the main menu of the program, looking for the section " Configure Setup Data."And we look at all subsections in order.
Particularly interesting for us will be subsections " Chipset Setup."And" Bios Features Setup.».
The modification itself is the activation of blocked options.

In each subsection there are columns with headlines " Option Name.», « Active.», « Rights.», « Optimal"And" Failsafe».

Blocked options are highlighted, opposite these options in the column " Active.»It is indicated" No.».
Keys Page Up. and Page Down You can use this or that locked installation.
There are cases when in a column with heading " Option Name.»The names of the options on the screen are completely absent.
In this case, you will have to include all the options in a row "blindly".

Having finished the change, go to the Main menu of the AMIBCP program and, pressing the key, save the modified BIOS in the file.
After saving the modified file, the "flash drive" is used to update the BIOS.

Conclusion

A number of motherboard manufacturers produces their branded programs to update the BIOS directly in the Windows environment.
These include the utilities of Gigabyte, Asus, Intel, etc..

Before the firmware, make sure that the update is allowed in Setup BIOS - in the BIOS Features Setup section, the BIOS Flash Protection parameter must be in the Disabled or Auto position.
After the "flashing" produce a reboot of the computer and enter the SETUP BIOS.

In the practice of modification there were cases when the BIOS was blocked settings, allowing to increase system performance.
Namely: the ability to change the voltage on the AGP bus in the range of 1.5 - 1.8 V in increments of 0.1 V and on the DDR memory modules within 2.5 - 2.8 V with a step of 0.1 V, and also increase 5, 7.5 or 10% standard voltage on the core of the processor.

There were cases when s.m.a.r.t mode was blocked in BIOS. For hard drives and BYPASS MODE mode for optimal CPU operation.
The blocked option in the Hardware Monitor subsection - Slow Down CPU Duty Cycle was interesting.

When you go to the DOZE mode, the CPU clock frequency is reduced.
Using this option, you can set another value. clock frequency CPU as a percentage of the previous one.

In conclusion, I want to remind: it is not worthwhile due to the full control over the BIOS to lose his head.
And therefore, to modify and change the parameters should be approached with some sharing of caution and with understanding what you do and what you go.

Truborez and pipe bender for self-assembly Szho

Two EK Water Blocks tools are addressed to those who collect SJO alone: \u200b\u200bCutter EK-Loop Soft Tube Cutter and a fixture for flexible pipes EK-LOOP modulus hard tube bending tool.

Cumulative windows Update 10 1909 KB4528760.

January 14, 2020 Microsoft has released a cumulative update KB4528760 (Build 18363.592) for Windows 10 November 2019 UPDATE (version 1909) based on x86, x64 processors (AMD64), ARM64 and Windows Server 2019 (1909) for systems based on x64 processors.