What is Boot Menu. Hot keys to enter the BIOS, Boot Menu menu, recovery from the hidden partition. How to call the boot menu on Acer laptops

How to enter the download menu on my laptop and computer?

Do you want to download your computer from a USB drive or disk? To do this, you do not need to enter bIOS settings. Especially if you do not understand this. In the end, there is a simpler way. In this case, it is enough to enter the download menu and change the priority of device loading. This is done within 10 seconds. And most importantly - without shamanism in the BIOS.

Download menu - what it is

What users usually make for reinstalling Windows? As a rule, write a licensed digital copy to boot disk Through Ultraiso, and then configure the BIOS to boot from the USB drive. In principle, this is not difficult, but there is a simpler option - the call in the download menu. What is it?

Download menu (or Loading the Menu) is an extremely useful BIOS option. With it, you can quickly configure device load priority. Simply put, the launch of the download menu causes a small window in which you can immediately place a USB drive (or DVD) first, and hDD - in the second. At the same time, you do not need to enter the BIOS.

In addition, changing the settings in the "Booth" menu does not affect the BIOS settings. That is, this option works once - for one inclusion. And when you restart the computer, Windows will boot with hard disk (normally). If you need to run again installing Windows With USB flash drive - call the download menu again.

How to call the download menu

How to open the download menu? It is very simple - press one button when download windows. Which one of? It depends on the:

  • bIOS version;
  • motherboard;
  • laptop model.


That is, the situation is exactly the same as in the BIOS. For example, to enable BIOS portable computerYou needed to click the "Del" or "F2" button, and you need to click on the other.

Therefore, we will look at how to start the "Booth" menu on the popular laptop brands and personal computers.

How to enable boot menu on Lenovo laptops

Similar articles

The owners of Lenovo laptops should not have any difficulties. In the end, the loading menu in Lenovo starts very simply by pressing the F12 key when Windows starts.


In addition, on the case of many models there is a special button with a curved arrow. You can click it if you want to choose an additional one. Download options.

How to open the boot menu on ASUS

It is right here to note that there are ASUS motherboards (installed on a PC) and laptops of this brand.

Start Download menu On a computer with. The ASUS board is simple - you need to press the F8 key when loading it (at the same time, when you usually go to the BIOS).

How to enter the download menu on the laptop and computer

Similar articles

How to enter Download menu on ASUS, Lenovo, HP, Samsung, Acer. other laptops and computers. bootmenu/.

Acer Aspire E1-572G. Configuring the BIOS and the Windows Full Setup process for ND!

How do I log in and configure BIOS? How to reinstall Windows? Let's look at all this with an example. Notebook Acer Aspire. E1-572G ,.

And with ASUS laptops there is a small confusion. It seems that the manufacturer is the same, but the buttons for running the Booth Menu are several. In the end, start the boot menu on laptops asus Performed using one of two keys:

Most often it is an ESC button, although it can be F8. However, there are only 2 keys, so you will quickly understand which one is responsible for launching the download menu on your ASUS laptop.

How to call the boot menu on Acer laptops

The boot menu on Acer opens by pressing the F12 button. But there is one small nuance. The fact is that usually start the download menu on laptops Acer. Disabled. And when you press F12, nothing happens. To work, you need to do the following:

  1. Log in to the BIOS (when loading a laptop, press the F2 button).
  2. Click the Home tab.
  3. Search Line F12 Boot MenuMSGSTR "and change the value" Disabled "to" Enabled ".
  4. Save the changed settings and exit BIOS.


The system will restart, and you can enter the download menu on the ACER laptop using F12.

How to enable the stand menu on Samsung laptops

To call the download menu in Samsung, you need to press the ESC key. But Samsung laptop owners need to know one feature. The fact is that to call the "Booth" menu you need to click the "ESC" button once! If you click twice, the window will simply close.

Therefore, you will need to use it to know when to press the ESC key. Although there is nothing complicated here - just a couple of attempts, and you will move in the download menu on the Samsung laptop.

How to enter the "Booth" menu on HP laptops

Similar articles

Starting the download menu on HP also has its own characteristics. In the end, the opening of Booth Menu is somewhat different. To enter the boot menu on the HP laptop, you need:

  1. With immediate turn on windows Press the ESC key.
  2. The Start menu appears - press the F9 button.
  3. Ready.

After that, the HP laptop download menu opens, and you can set the priority of the device on (using arrows).

How to enter the download menu in windows 10 or 8

All the above methods allow you to start the download menu in Windows 7. If Windows 8 or Windows 10 is installed on your PC or laptop, you are probably not able to enable the "Booth" menu.

There are three ways to fix it:

  1. Hold SHIFT when you turn off a laptop or PC. After that, it will turn off normally (in the usual understanding of this word). And then you can start boot Menu in Windows 10 by pressing the desired key.
  2. Instead of disconnecting a PC, you can restart it. And at the time of inclusion, simply press a specific key corresponding to your laptop or motherboard brand.
  3. Disconnect the quick start function. For this:


All - Now you can easily go to the download menu in Windows 10 or Windows 8.

List of keys to enter the download menu

For your convenience, the screenshot below shows the keys to start the download menu for popular laptops and PCs. For example, for computers working on the mat. MSI board - button F11. And launch the "Booth" menu on laptops Sony Vaio. Exercised using F12. In general, understand yourself - the table is simple and understandable.

In addition, for convenience, the buttons for entering the BIOS are recorded. If for some reason you fail open Boot Menu, you can always change the priority of devices loading standard method - via BIOS.

In some models of laptops and computers, when you enter the BIOS settings, you can detect the option called "F12 Boot Menu". Not everyone knows what it is and for which she answers. In this article you will find the answers to these questions, and also learn whether it is necessary to include it or not.

What is the F12 Boot Menu in BIOS?

To understand the assignment of this option, first need to translate it into Russian. The translation sounds like this: "F12 boot menu". Here F12 indicates the button on the keyboard.

Simple words, describe the value of the F12 Boot Menu, as "activation of the boot menu call by pressing the F12 button on the keyboard."

This is how the boot menu looks like

This means that if you transfer the value opposite F12 Boot Menu to the "Enabled" position, then you will enable the ability to open a list of devices from which the computer can start booting (flash drives, CD-ROM, hard disk, etc.) when pressing F12 buttons immediately when turned on.

Why do you need it?

The activation of this option is useful, so that before installing Windows from the flash drive or, you did not have to configure the priorities of the download.

Boot menu

For activated option "F12 Boot Menu" To just press F12 while turning on the computer or laptop, in the list that opens, select a USB flash drive and press the "ENTER" button.

What is Boot Menu (Booth Menu), why it is necessary and what replaces the BIOS. In fact, when you select the download menu devices, use the best. Read more further.

All more or less experienced computer users know that when installing OS, or the use of the tool with disk carrier or flash drives need to be prioritizing these devices in the BIOS, simple words - What will be loaded in the first place when the PC is started. To do this, you can use.

Boot Menu. (Menu Booth) - the download menu is intended to simplify the selection of devices from which it is possible to load. You turn on the computer, go to Boot Menu, using special keys, and then select the boot device, for example, a flash drive or drive. It simplifies the ability to many actions to inexperienced users.

Now we will learn how to enter Boot Menu using conventional keyboard shortcuts. And also how to do it on laptops.

How to enter Boot Menu - BIOS boot menu

When we enter the BIOS, you press a certain combination on the keyboard. In the case of Boot Menu, the same thing. In many cases, such methods are relevant for laptops and systemics: ESC, F11, F12, however, there are other options to go to the menu button.

It makes sense to use this opportunity if you do not need to change some parameters in the BIOS, except for the procedure for downloading.

So, if you have a laptop with Windows 8, and now with Windows 10, the keys above are not the fact that will work. In some models, when the laptop is turned off, the device can be considered, goes into hibernation mode, and does not turn off, as usual, so an attempt to enter the menu is unsuccessful.

To get rid of this problem, you can use the following methods:


How to enter Boot Menu with ASUS laptop

Most possible options Inputs for ASUS are the following keys:

  • ESC - for many brands;
  • F8 - for devices where names can begin with the letters x and k, if not worked, then use ESC.

Log in Lenovo Load menu

In these models it is even easier, you press the F12 key and get into the menu button. Also on many laptops of this brand there is a special button with an arrow that allows you to select the type of download, for example, BIOS, Boot Menu, or recovery mode.

and translate the option there F12 Boot Menu. In enabled position - Enabled. Then we save the applied actions, reboot and try again to log in using the F12 key.


Entrance to Boot Menu Laptop HP

I have a laptop of this brand, so I know a lot about him. The input in the download menu from this device can be made like this:

  • ESC is a fairly frequent option;
  • F9 - When you click on the ESC key.

Log in to boot menu on other models of system boards

In the variants described by me below almost the same as described above, that is, the same keys:

  • Dell laptops - F12 key.
  • TOSHIBA - F12 key.
  • SAMSUNG - ESC key.
  • System boards from Intel, Foxconn, Phoenix-Award - ESC key.
  • Gigabyte motherboards - F12 key.
  • The board from ASUS, AMI is the F8 or F11 key, like on laptops.
  • MSI, ECS, ASRock, Sony - F11 key.
  • Biostar - F9 key.
  • ASUS AMI - ESC key.
  • Fujitsu - F12.

Here, most models I described. If you are unhappy that the list does not have your laptop or system board model, please leave comments, and I will try to help you. You will always always find in your instructions in more detail. system board Computer or laptop. If there is no paper version, look for an electronic on the Internet.

Why Boot Menu does not work on a laptop

If you have the menu, it is refused to work, that is, it does not start or sees connected devices, then this is a number of explanations.

It turned out that on some laptops, this mode does not function for the simple reason that the UEFI mode is enabled, and not BIOS Legacy Mode.. In this case, you can try to enable or Legacy BIOS or UEFI and check the operation of the download menu.

The second reason is a rare failure. In this case, it does not go out in both the download menu and BIOS. Treat usually simply - off and re-enabling the computer. The second way - by pulling out the CMOS batteries.

It is possible that the menu is turned off on your device, and on some laptop models there is an opportunity to enable it. Go to the BIOS and find a F12 Boot Menu point there, which must be translated into Enabled.

Want to know how to enter a special boot Menu boot, computer or laptop?

To boot from the flash drive or CD - DVD Discbut?

In this article you will learn how to do it right.

When we make a clean installation of Windows, then we need to boot not from a hard disk and from another media.

This is either CD - DVD disk or flash drive.

Usually for this use the entrance to BIOS Computer or laptop.

That is how we did in the previous lessons.

We went to BIOS and changed the order of downloading devices.

It is at this step that approximately 90% of users who want to reinstall Windows stop.

They cannot enter the BIOS and make the desired settings there.

Exists alternative way Selection of download device.

it Boot Menu. Boot Menu is easier to enter BIOS and more conveniently.

The essence of the button menu is to press a specific key when the computer or laptop is booting.

At the same time there is a menu of this type:

In this menu, we can choose any device and immediately boot off it.

Let's consider it more.

I connected a loading flash drive to a laptop. On my laptop for the entrance to Boot Menu, the Escape key meets.

I clicked on the Escape button, hold it down and, at the same time, turn on the laptop with the button. In front of me opened a boot menu.

Cursor control keys, up, I choose the desired device. In this case, this is a flash drive.

As soon as the desired device is selected, click on the ENTER key.

Ready! I boot from the flash drive and now I can start installing Windows.

So, to enter Boot Menu, you need to press one key when you boot a computer or laptop.

As in the case of the BIOS, the Boot Menu call keys are different, depending on the manufacturer and the brand of your laptop or computer.

Most often there are such keys:

F12, ESC, F11, F9 and F8

Boot Menu has significant advantages over BIOS.

1. Boot Menu is easier, you can use it faster.

2. You do not need to understand the complex BIOS settings and change them. Let me remind you that there are such settings in BIOS by changing which your computer or laptop will stop loading at all. Using Boot Menu you will avoid.

3. You do not need to return the BIOS settings back, in the original condition.

Of course, Boot Menu has its own features.

If you have Windows 10 or Windows 8.1, then to enter Boot Menu, I recommend using a computer reboot instead of completing the work. The fact is that in these operating systems, the default is activated by the so-called quick launch.

Quick start makes it so that when the computer is completed, the computer did not turn off, in the usual understanding of this word. He falls asleep, or rather hibernation.

Therefore, when you turn it on, he will not give you the opportunity to enter Boot Menu. He will just wake up and show you that the condition in which was when you clicked on the end button.

The output is very simple: use the reboot instead of completing the work.

Let's see how it is done:

So, the laptop is turned on, Windows is loaded, the flash drive is connected. Now I turn on the reboot.


I just click on the Start button, click the Shutdown button and click Reboot.

As soon as Boot Menu in front of us, we can start installing Windows.

Quick start can be turned off at all. And then you can use Boot Menu as usual when you turn on the computer.


Setting this is very simple I'll show you now as it is done. Quick start turns off through the classic control panel. On Windows it can be opened through the search. Just enter the word: panel. As soon as the control panel icon appeared in the search results, simply press the ENTER key.


In the control panel, you can switch from categories to icons. And you can simply search for power out through the search.

On the left we had a power supply. Click on it.


Here we need a button action power buttons. Click it. To unlock the settings that are not active, you need to click, as shown in the picture. Changing the parameters that are not available now.


Now we can disable quick start ( Fast loading), Just shoot a tick. Then save changes.

After that, Boot Menu will be available to you when loading.

In Windows 8.1, the setting is made similarly.

Another feature.

In some trimmed BIOSs and not very sophisticated, there is a menu item that turns off Boot Menu.

More information about it in video.

If you have such an item in your BIOS, then you will have to go to the BIOS and turn on boot menu once. That is, activate this item.

After that, Boot Menu will be available to you when loading.

From the table, you can find out which keys you need to click on your PC or laptop to enter the Boot menu.

Manufacturer Model (if not specified - all models) Input key in boot menu
ASUS. Desktop computers F8.
k25F, K34U, K35, K43U, K46CB, K52F, K53E, K55A, K60ij, K70ab, K72F, K73, K84L, K93, K95VB, K501, K601, R503C ESC
x32a, x35u, x54c, x61g, x64, x75a, x83, x90, x93sv, x95gl, x101ch, x102ba, x200ca, x202e, x301a, x401a, x401u, x501a, x502c, x750ja F8.
Vivobook F200CA, F202E, Q200E, S200E, S400CA, S500CA, U38N, V500CA, V550CA, V551, X200CA, X202E, X550CA, Z202E ESC
N550, N750JV, G750, Infinity UX301LA, Prime UX31A, Prime UX32VD, R509C, TAICHI 21, Touch U500VZ, Transformer Book TX300
COMPAQ. Presario. ESC, F9.
Dell. F12.
emachines. F12.
Fujitsu. F12.
HP. Pavilion Media Center A1477, Pavilion 23 All in One, Pavilion G4, G6 and G7, ProBook 4520S, 4525S, 4540s, 4545s, 5220m, 5310m, 5330m, 5660b, 5670b, Pavilion A410N ESC
Pavilion ELITE E9000, E9120Y, E9150T, E9220Y, E9280T ESC, F9.
Pavilion HPE PC, H8-1287C, Pavilion PC, P6 2317C, Pavilion PC, P7 1297CB, TouchSmart 520 PC, Envy X2, M4, M4-1015DX, M4-1115DX, SLEEKBOOK M6, M6-1105DX, M6-1205DX, M6- K015DX, M6-K025DX, \u200b\u200bTouchsmart M7, Envy, DV6 and DV7 PC, DV9700, Spectre 14, Spectre 13, 2000 - 2A20NR, 2A53CA, 2B16NR, 2B89WM, 2C29WM, 2D29WM ESC (then press F9 to enter the "Boot Menu")
Other models ESC, F9.
Intel F10.
Lenovo. Desktop computers F12, F8, F10
IDEAPAD P500. F12 or Fn + F11
IdeaPad S300, U110, U310 Touch, U410, U510, Y500, Y510, Yoga 11, Yoga 13, Z500 Button NOVO Button (next, after the power button), F12
ThinkPad EDGE, E431, E531, E545, Helix, L440, L540, S431, T440S, T540P, Twist, W510, W520, W530, W540, X140, X220, X230, X240, X1 Carbon, IdeaPad S10-3, G460, G470 , G475, G480, G485 and other models F12.
Nec. F5.
Packard Bell. F8.
Samsung NC10, NP300E5C, NP300E5E, NP350V5C, NP355V5C, NP365E5C, NP550P5C ESC
Series 5 Ultra, Series 7 CHRONOS, SERIES 9 ULTRABOOK ESC (need to turn off "Fast Boot" in the BIOS)
Ativ Book 2, 8, 9 F2 (you need to turn off "Fast Boot" in the BIOS)
Other models F12, ESC
Sony Vaio Duo, Pro, Flip, Tap, Fit assist button (Press the ASSIST button when the computer is turned off, and not when loading)
VAIO, PCG, VGN F11
VGN. ESC, F10.
Toshiba. F12.

When installed operating system You need to go to the boot menu to specify the computer, from which device to boot. It is also necessary when you need to start with Live CD or boot flash drive. Today I will tell you and show you how to enter Boot Menu How on motherboards PC and laptops.

In the same way as to enter the BIOS or UEFI, you must press a special key (F2 or DEL), there is also a specific button to call the boot menu. As a rule, these are the keys F11, F12 or ESC, however there are exceptions. Usually, when you turn on the computer under the screensaver, you can see the key that is responsible for the Boot Menu call.


You can, of course, do without Boot Menu, simply choosing a certain order of downloading devices in the BIOS, but if you want to download it open (check for viruses or installation of the system), then I would advise you to use the menu boot, because it is much faster.

So, for what you need Boot Menu at all - you ask. Such a menu shows a list of devices connected to PCs from which you can boot (flash drives, CDs, Winchesters) for further installation of the system or for testing components.

Login to Boot Menu in Windows 8 and Windows 10

If you are the happy possessor of a laptop, on which Windows 8, 8.1 or Windows 10 was initially installed, then enter the boot menu could not work. I explain why: Turning off in these systems is not full, since it looks more like hibernation, so when you press F11, F12, the ESC of the download menu may not be opened. Fix it in several ways:
- Hold the SHIFT button when you select "Turning off" and then the PC must turn off fully;
- turning off the quick start of the system - in the "eight" go to the control panel,

Go to the "power supply",

On the left we click on the "Actions of the Power Buttons",

Turn off the "Enable quick Start"(You can not even do it on a laptop).

Entrance to Boot Menu on Asus Laptops and Motherboards

Almost all stationary computers asusTo enter the download menu, click the F8 button immediately when the computer turns on. If we click F9 or DEL, then we will get into the BIOS.

Regarding laptops, there is a bit confused. The ESC key is called the download menu on modern models, the F8 key acts on older laptops and mainly on models whose names starts the letter K or X. In short, if the ESC key does not cause Boot Menu, then reboot and try pressing F8.

Entrance to Boot Menu on Lenovo laptops

To call the download menu on lenovo laptops It is enough to press the F12 key. If you want to use additional download options, press the additional arbitrator key,

Login to Boot Menu on Acer Laptops

On all Acer laptops and monoblocks to call the Boot Menu, the F12 key serves when you turn on. But, the laptops of this company have one unpleasant feature - the ability to call the download menu is disabled in the BIOS settings. To fix it, we get into the BIOS by pressing the F2 key. Now we find the "F12 Boot Menu" parameter and activate it so that the word Enabled is next. It remains only to save the settings and exit BIOS.