Connect the Samsung TV to the tablet. How to transfer data from a tablet to the TV. How to watch movies through the phone on the TV. All possible ways. HDMI is the best option for connecting two devices.

Today, in the era of technologies, everything develops not by year, not even for months, but by day. Every day, more powerful inventions appear in the market. Are no exception. This device is almost every family. After all, the use segment is unlimited, it will suit the same as for a child to play games and for adult - watch movies, sit on social networks.

In contact with

However, not all users guess that you can view photos or films on your TV, in more favorable conditions. The question is only in that: can I connect the tablet to the TV?

It is very easy to implement this, in this article we will look at how to connect the tablet to the TV via USB also HDMI, Wi-Fi, MHL.

USB

To connect your device to TV This way only the usual charging cable of your device is needed. Just pull it out of the adapter charger, One end to turn to the USB input of your TV, and the other to the tablet. Moreover, the microusb and miniusb subsidizes (for older models).

After connecting, you need to go to the tablet settings, select USB and put a check mark on the media file transmission mode. On the TV, change the source (Source) to the USB drive. If everything is done correctly you can wander to the folders of your device without any problems and do what you need: listen to music, watch movies, view photos.

At the end, you need to disconnect two ends from the devices and set the source to the original mode.

Pros of this method:

  • Ease of implementation
  • Requires a cable that every user has
  • During data transfer, your device will charge

Minuses:

  • Opportunities are limited to the use of tablet as a USB drive (USB)

As a result, we can say that this method is suitable for those who want to listen to music or watch video, no more. How to output the tablet screen to the TV we will look at the next section of this article.

HDMI

If you want to design images from your tablet to the TV, this is a solution to your problem. The first thing we need it: Free HDMI port on TV, usually there are several of them, HDMI port on the tablet, HDMI-HDMI cable. But, in most cases, your device will not have a built-in HDMI port, so you have to resort to the use of microUSB-HDMI adapters.

If you have this, it is enough to connect one end to the tablet, the other in the free port. We change the image source on HDMI 1 or 2 (depending on which port you used). After a couple of seconds, the image from the tablet must be duplicated on the TV screen. In case this has not happened, it is not necessary to worry. Go to the settings and find the HDMI point, select the frequency and quality of the transmitted image and everything will work.

Now, you can do whatever: watch video, play music and play dynamic games, enjoying a pleasant image on the screen.

At the end, you must also change the video source to the original and disconnect all the wires.

HDMI cables prices

Pros:

  • High quality pictures
  • No delay between devices
  • All TVs have at least one HDMI port.

Minuses:

  • Not charging
  • Not every tablet has an HDMI port
  • Not every owner has a suitable adapter.

MHL

MHL (Mobile High Definiton Link) is an alternative to HDMI. This technology allows Transmit to a TV or monitor streaming video and sound high Quality And duplicate the image.

MICROUSB-HDMI cable will be needed for connectivity.

MicroUSB insert into the tablet, the other end is connected to the port called MHL-HDMI, it is usually only one, so it will be hard to make it difficult. Again, change as before, the flow source on MHL-HDMI.

Images and sound will start automatically duplicated on the monitor, without delay. After graduation, set the source in the original mode.

Pros:

  • During data transfer through MHL technology, the device is charging
  • Image transmission without delay

Minuses:

  • Not every TV supports this technology.
  • Permission on the monitor will correspond to the permit on the tablet
  • The presence of adapters if there is no initially desired cable

Prices for MicroUSB-HDMI cables

Wi-Fi

Most technological way. For his work, you need to have a technology on TV Wi-Fi and Wi-Fi Direct. To connect devices with each other you need to enable Wi-Fi on them. Go to Wi-Fi Direct point and finding the name of your device to connect them to each other.

Synchronization occurs automatically, you only need to confirm the connection request.

After that, the image will begin to duplicate and you can do what you need without using wires, however, the image delay will be noticeable. When action on the tablet - on the monitor it will be displayed in about half a second.

To complete the work, it is enough to turn off Wi-Fi on one of the devices.

Pros:

  • Convenience. Everything can be done lying on the sofa
  • High quality pictures

Minuses:

  • Exceptionally modern TVs support wi-Fi technology Direct.
  • Delayed image
  • Fast battery discharge

In this article we disassembled different methodsHow to output streaming from your tablet to the TV. They all differ among themselves and everyone will be able to find a suitable option to him.

Tablet computers, as well as smartphones firmly won the love of users. In many ways, it is caused by their convenience - the tablet, just like the phone, does not take much space, it is convenient to take it with you, but at the same time it has all the basic functions necessary to the ordinary user. .

Meanwhile, many do not know that the capabilities of the tablet can be expanded by connecting it to the TV. Image output by big screen Allows you to view images and videos in a much more convenient format. In this article we will talk about how to connect a tablet to a TV via USB, HDMI and other types of cables.

Methods for connecting the tablet to TV

To begin with, it is worth understanding which methods for connecting the tablet to the TV are available at all. There are the following options:

  • HDMI,
  • Wi-Fi.

As you can see ways to connect a tablet to TV really a lot. This means that even if your device does not support one of the ways to connect, you can always try another. On the other hand, such a variety of ways can confuse an ordinary user who is not familiar with all kinds of cables. That is why we will stay in more detail on each so that you can choose the way that is suitable for you.

HDMI cable

Most the best way Connect the tablet to the TV is to use the HDMI cable. In addition, he is also the most popular. Why is it so?

  • The HDMI cable allows you to send immediately and the image, and the sound on the screen - and all this with only one cable. Additional adapters for it are not needed.
  • Thanks to the digital signal format, the best quality is achieved.
  • Technology "Display Mirroring" allows you to fully reflect everything that happens on the screen.
  • Setting up as simple as possible and often does not require any additional actions.
  • Thanks to its popularity, this connector is present almost on all modern TVs.
  • For the same reason, the connector for HDMI is increasingly found on the tablets.

If you have a HDMI connector on your TV and on the tablet, stop the choice on it. If you worry about how to connect the tablet to the TV via HDMI - do it very simple. You just need to connect one end of the cable to the TV, and the second to the tablet - and that's it. Setting usually happens automatically.

If this did not happen, try entering the TV settings and install HDMI as a source. In the tablet settings, select the same among sources of exit.

Unfortunately, this connector is still not on all tablets. If you did not find it on your device, do not be discouraged. HDMI-USB will come to your aid. At one end, he has an HDMI input, and on the second USB. The USB connector is 100% there is on any tablet, so with it, you can easily connect your tablet to the TV. Now you can calmly watch movies and videos from your tablet in large format. ,

Of course, it still does not always turn out to connect the tablet to the TV using a cable xdmi. If you failed to do this, you should try another way.

USB cable,

The main advantage of USB is that it is definitely present on any device, which means you will be likely to connect with high probability. Bad news here is that the USB cable does not give a full connection of two devices. The very "screen reflection", which gives HDMI, you will not get.

Maximum that can give you a USB is the ability to use a tablet as external drive. Roughly speaking, your tablet will act as a flash drive.

It's not as bad as it may seem. If you connect the tablet to the TV for movies and video on the big screen, then you can do this using a gadget as a media storage. You just need to find the file you need, reproduce it and enjoy watching.

If you still want to get a full-fledged connection, consider other options.

RCA cable

RCA cable, or, as it is also called, "tulip", suitable for connecting the tablet to the old TV. On such TVs, there is often no login for HDMI, and therefore the RCA cable becomes an excellent alternative. At the second end of the RCA cable, Ideally should have an HDMI connector, but in extreme cases can be another suitable for your tablet. .

The main disadvantage of this cable will be low quality picture, as well as many wires, which is not too convenient. However, this is an effective alternative to HDMI wire.

So how to connect the tablet to the TV through the tulip? This is not done at all. The main thing is to follow the color match when connecting the wire. Yellow is responsible for the image, and red and white - for the sound, so if you confuse them with each other, the connection will not work.

MHL interface

MHL is a cable specially made under mobile devices. At the other end is HDMI input, which is intended for the TV.

In fact MHL just makes it easier to connect the tablet to the TV. Its use will be for you optimal option In the event that there is an HDMI connector on your TV, and there is no tablet. Often it happens, so if you have fallen into such a situation, just take extra money to buy MHL wires or MHL adapter for HDMI wires, and calmly view files from the tablet on the TV.

VGA and DVI cables

VGA and DVI inputs are commonly used for personal computersBut for the tablets such connectors almost never apply. It is clear that the use of such cables in this case is inappropriate. Nevertheless, maybe such that you have a HDMI-VGA or HDMI-DVI wire, and you want to connect the tablet with it.

Numerous adapters can come to the rescue. It is best to use an adapter to HDMI, but in the absence of this connector on the tablet you can replace its USB. True, as already noted above, in this case you will not be able to take advantage of all the functions of the tablet on the TV.

Wi-Fi connection

Yes, it is really possible. True, it is still possible not on all devices, but soon the technology is most likely to be applied everywhere on all devices. So far there are two options for how to connect the tablet to TV by Wi-Fi:

  • Wi-Fi Direct
  • Sophisticated software.

We will deal with each of the ways.

Wi-Fi Direct

This feature is mainly present from the TV with SmartTV technology. If you have such a technology on TV - consider you lucky.

To start this feature, go to the tablet settings and find the Wi-Fi Direct there. After turning it on on the tablet, do the same in the TV settings. Look for this setting in the "Network" section. After activating the function on both devices, wait for the automatic connection. Once the device synchronization occurs, the contents of the tablet will appear on the screen.

Sophisticated software

Unfortunately, SmartTV technology is far from being present not on all TVs. But there is an output - the use of third-party programs for wireless connection.

If you have android, then boldly come from the tablet in Google Play. And look for a suitable application. There are many such applications, so try to choose the most suitable you depending on the TV model. For example, there are applications called "Panasonic TV Remote" or "Sony TV SideView". As you can see, it usually becomes clear from the name, for which TVs use the application.

In addition to applications, there are technologies designed specifically for tablets for wireless connection with other devices. .

The most popular of these technologies is Wi-Fi Miracast, it allows you to broadcast the image on the TV screen without intermediaries. Apple has created its own analogue called AirPlay. True, this technology is applicable only for American devices that have passed the appropriate certification. Samsung has not begun - their technology has been named AllShare. It allows you to exchange data within one local network.

It is worth understanding that all these technologies are still new, and therefore not well developed. Because of this, the failures often occur in them, and in general, the quality of the connection is shrom. However, these technologies are constantly being improved, so soon we will get a high-quality and efficient wireless connection between two devices.

Connection via phone

By the way, you can do the same thing to connect your smartphone to the TV. The difference is that there are usually no HDMI connector on the phones. On the other hand, on some smartphones there is a Micro-HDMI connector, so using the wire, at the end of which there will be a Micro HDMI connector, you can easily connect your smartphone to the TV. In the extreme case, you can buy an HDMI-Micro-USB adapter, with which you unambiguously connect any phone to the TV.

If only the question of how to watch movies on the big screen, you can use a standard USB-Micro-USB wire (which is usually used to charge the phone) and use your smartphone as a data drive.

It has the opportunity to prepare a very useful and current article on setting up a wireless screen on tablets and phones that work on operating system Andriod. With Miracast technology, we will bring the image from the tablet to the TV. All this will work through the air, that is, without wires.

We connect the tablet and the TV for wireless image transmission

All that we need to do is enable Wi-Fi on the tablet, enable Miracast on TV and connect devices.

Turn on Miracast / Intel WIDI on LG TV

I will show the example of the LG TV. If you have a TV by another company, then this function can turn on a little differently. In the menu, it can be called otherwise.

Turn on the TV and press the button on the button. SettingsWhat to go to the settings.

In the settings, go to the tab Net and select Miracast / Intel's Widi.

Re-connect according to the instructions.

Use wireless image transmission in practice

I played a little, and tried to understand why you can really use this technology. The whole problem is that with such an image transfer, there is a slight delay. That is, the page has already opened on the tablet, and on the TV it appears across a second, roughly speaking.

Perhaps on more expensive equipment, this delay will be smaller, but it will most likely be. In order to show photos on the big screen, such a connection is suitable. All without wires, as we love.

Sites can be viewed, or, for example, to watch online video.

Started by the way video on the tablet, on the TV it is displayed well. Although with the delay, but the sound goes synchronously with the video. Sound, by the way, is transmitted too.

I tried to play the game, but the delay is a little annoying.


Afterword

Excellent technology that allows without any wires to bring the picture to a large screen that you see on your tablet, or phone. Everything connects without any problems and works without failures. At least I did not notice any problems.

From the minuses you can only select the delay in updating the image on the TV. It is difficult to play games, but see photos, or video - you can. To bring some presentation to the TV, in general without problems.

I will be glad to see your feedback and opinions about this technology. How do you all work, what application found? Share in the comments! Good luck!

Connecting any tablet to the TV allows you to watch movies, listen to music, enter popular applications on the big screen. Tablet Connect to a modern TV is not difficult, which you will not say about older models, to which it is harder to join. The cause of all kinds of problems can be not supporting TV standards, old connection methods for which adapters are needed, etc. In this article, consider everything possible problemswhich may occur when conjugating devices and methods for solving emerging problems.

Connection support

To determine the possibility of pairing a gadget with a TV, you need to know, you need wires or there is support wireless networksif you need, then what. Due to the big variety of equipment, it is necessary to check whether it is possible to create an access point on a device or connection to the Wi-Fi network. For those who do not understand this topic, we describe in detail how to determine possible variant Equipment synchronization and what will be required to make the user.

To begin with, the article will be listed possible methods Connections:

  1. Wi-Fi wireless network, there are almost every modern smart TV.
  2. HDMI interface, there are in older TVs (after 2008).
  3. Composite cable (tulip).
  4. USB connector or mini USB. It is quite rare.
  5. With the help of converters. Extreme way, if there are no other options.

There are many ways, which means that at the very beginning will only have to determine which one is suitable for this device. It is necessary to consider what the user wants to get when connecting the device to TV: transfer files from device to TV, broadcast from device or HDD.

Connection via HDMI Cable

The most comfortable connection option for video broadcast and listening to music from the gadget under android management Is HDMI cord. Therefore, you should make sure that there is no such connector on the device before trying to connect to another cable.

MICRO-HDMI TO HDMI passive cable

Benefits:

  • HDMI supports audio and video transmission;
  • conjugation of devices, happens quickly and without additional settings;
  • "Mirror reflection" allows you to display the image of the tablet to the TV, exactly repeating everything that happens on the gadget;
  • hDMI image transmission The cable is performed in digital format, so the picture quality is always at a high level;
  • this is a common method and adopted by the standard for all modern devices.

To transfer the image of the gadget via HDMI, connect one side of the cable to the gadget, and the other to the monitor. After connecting the device is automatically configured and can play any video. If something went wrong, you need to open plasma settings and devices:

  • On the tablet in the output settings you need to specify HDMI.
  • On Smart TV in the "Source" (Source, Input) you need to select HDMI. In case the HDMI connectors are more than one, then select the one in the menu.

On the tablet, Micro-HDMI is usually used instead of a full-scale jack. So for the connection you need a special wire (Micro-HDMI to HDMI) or (Mini-HDMI TO HDMI). Even as an option, you can use an adapter. The adapter is installed on the gadget connector and the usual HDMI cable can be connected to it.

This method of conjugation is ideal only if both devices support MHL technology. This technology Present in TVs of well-known manufacturers (Samsung, Sony, Toshiba, LG), and less popular firms may not be supported. Therefore, make sure that this feature will have to be independently or on the Internet by the name of the equipment, or by the presence of a small inscription on the HDMI nest.

Active Micro-USB to HDMI adapter

Unlike 1 method, to synchronize compatible equipment in a pair, you will need an active cable type "Micro USB-HDMI". The connector (MHL-HDMI) stands out against the background of other inscriptions, it is located next to the HDMI hole. In the TV settings, you need to find the MHL-HDMI input as a source. Such a connection will allow high-quality digital signal transmission, and will also charge the tablet during the broadcast, which guarantees the stable operation of the system.

At the most inopportune moment, the gadget will not turn off due to low battery charge. The image delays in this case will not be, and if there are, then minor. The only minus this methodis the image resolution on huge screens, which is limited to the power of the device. If a tablet PC Modern, then worry about what. If MHL features only a gadget, you will have to use the Micro USB-HDMI active cable. On its case there is a USB connector in order to connect an external power source. So, for stable operation devices, you will have to find an additional power supply.

Connection via RCA Cable (Tulip)

If there is no HDMI connectors on the old "box", then we will need a RCA cable (tulip). This option is not so comfortable as HDMI and the transmission of the image occurs in analog format, but there is such a connector in almost all TVs.

RCA cable (composite)

This connection method will need to use the HDMI-RCA converter for tulips. HDMI-HDMI wires connect to the tablet, and the second side to the HDMI-RCA converter. Connector cable with three plugs Connect to TV. Yellow video transmission plug, and white with red - for sound.

Equipment of this type can be connected to American and European devices, thanks to the switch in the housing. In Russia, PAL system installed on TVs. The configuration of the converter is usually the cable required to recharge the Micro-USB.

RCA TO HDMI Converter

Connect the cable to match the color of the plugs to the color of the connectors on the TV. Connectors for plugs can be in front, rear and sides of the case. On the TV in "Incoming Sources" (INPUT, Login, Source), you must find the "AV" mode. If the analog inputs are more than one, choose the one that glows.

How to connect a tablet to a TV on a WiFi network

The method of connecting the tablet to the TV, without wires will be convenient for the owners of smart televisions (smart TV), which in stock has a built-in adapter. In such devices of signal transmission methods, two:

  • WiFi Direct (Access Point).
  • Connecting the device by applications from the manufacturer or third-party programs.

The image shows the ability to use the Wi-Fi Direct mode

WiFi Direct.

WiFi Direct technology showed itself in the first smart TV, so this feature is present in all modern devices. It is easy to configure and use.

Turn on the settings menu and locate the Network, Web tab. It should have a lifting of WiFi Direct. Select this item and wait until the program is automatically configured. At this time on the tablet, turn on in wiFi settings and find the name of the TV, if the access points are much and determine the name of your access point is difficult, look at open menu On TV, network name and select the network on the tablet. After that, the device will be conjugate and ready to work.

Third-party applications

In the event that the built-in access point function works incorrectly or with interference, help can third-party programs or applications from the manufacturer's company who were made after the device is released. Such an application for the tablet must be searched individually. Knowing the full name of the television device, find the application will not be difficult. Application instructions are attached on the source website or in the program itself. If there is no name on the TV case, you can find it in the settings in which you can get from the main menu.

For example, for samsung devices Used smart application VIEW.

Image of two synchronized devices

To synchronize the equipment, you need to connect to one from two devices wiFi networks. It is also necessary that the router is ready for pairing.

How to connect a tablet to a TV via USB cable

Transmit an image, as in the case of a HDMI connection, it will not work via USB. Such technology simply does not exist. Gadget can be used as a device for storing information. If the TV supports moving movies, music and images with external devicesThe tablet can also be used as a hard disk.

To set up a home theater for home theater with a tablet, you need:

  1. Connect the Micro-USB to USB cable (mini-USB to USB) with one end to the tablet, and the other plasma.
  2. On the tablet, click the window in which it will be the "Connect as a drive" item.
  3. Using the console on the TV, click on the "Source" button (INPUT, SOURCE) and select a USB drive.
  4. All videos, pictures and audio from a tablet will be visible on the big screen.

Image Smart TV with connected tablet

By connecting both devices via USB wire, you can select any movies and music from the tablet in the plasma menu. To do this, you need to click on the "USB drive" in the TV input parameters. In this case, you can use the tablet simultaneously in your needs.

There are a lot of opportunities for the joint work of these devices. You can display the image or working with the tablet files on the big screen using a wired or wireless connection. Depending on the mobile gadget model and the TV you will need various adapters for their conjugation.

Methods of connection

So how to connect the tablet to the TV? There are several ways to turn it into a multimedia center. For this use:

  • Wi-Fi;
  • miracast standard;
  • hDMI cable;
  • uSB cable;
  • cable

The image on the mobile device may differ from the transmitted depending on the resolution of the TV screen.

Wi-Fi

Wireless Tablet Connection is possible on Wi-Fi network via DLNA technology. You can connect it to the TV if you make the last part of the home LAN. Connecting a tablet to TV via Wi-Fi requires a router. In order to organize a wireless connection, make sure your TV (to choose from):

  • connected to the router;
  • has a built-in Wi-Fi module;
  • has a connector for connecting Wi-Fi adapter (Usually this is a USB port).

In the specifications of your TV, the Wi-Fi Direct support must be specified, which indicates the possibility of connecting via Wi-Fi.

On the remote, press the SMART-TV button or "Menu" and select Network Settings. The screen displays a list of all available Wi-Fi protocols. Connect to your network. You may need to enter a password. If settings are installed automatic connectionYou can connect the TV to the Internet yourself.

Now add your mobile device to the network. You can connect the tablet to the TV through various applications. Take care of the availability of additional softwareYou need to download to the gadget so that it can detect your TV. Each program is individually developed for different manufacturers and is available for download.

For Android devices, the BubbleUpnp application is most common. It is in free access to download with Play Market.. Install it. When starting, the application will determine the device available for pairing, including connected to Wi-Fi network television. After its choice, the program will analyze all the multimedia files on your portable gadget that you can play on a wide screen. Choose a file. The TV will require confirmation on its opening. Agree and enjoy watching your content through the TV.

Mobile device must be connected to the same home networkand TV.

This technology will allow you to connect to the TV without unnecessary wires. This compound standard will not require the use of intermediaries between two devices. The main condition is also a tablet, and the device to which you are connected must support this technology. However, only advanced models are equipped with it.

Start from the TV. Modern models support Smart-TV. Use this: Find the SCREEN SHARE function in the TV menu and activate it. Now you have connected Miracast.

Go to the tablet. Make sure that Wi-Fi is turned on. Different manufacturers Place the wireless connection button to different settings. It can be in "Advanced" or "Screen". Usually called " Wireless screen Miracast "or Play To. Press it and the tablet will automatically search for available devices for connecting. Synchronization will begin, after which you will be displayed with information from the gadget to the large screen.

This technology is available for Android tablets with version 4.4 and above.

The least difficult way to connect the tablet with the TV is considered to use the HDMI cable. Pick up the cable for yourself by determining the comfortable length of the wire. As a rule, all modern TVs have an HDMI input. All that is required is to connect the wire of both devices and activate HDMI in the settings.

To connect the tablet to the TV, pay attention to the following. Not all portable devices can connect to HDMI directly, as often not equipped with the desired port. This will require the MHL adapter. It connects to the tablet via Micro-USB. The adapter kit has an additional charging cable connecting to the power supply.

Connecting a tablet to TV via HDMI will not just view separate filesBut fully transmit an image and sound from your gadget to a large screen.

HDMI cable is not included in the tablet package. Purchased separately.

How to connect a tablet to a TV via USB? If you have a USB cable, you can connect your mobile device. However, you will not be released from one screen to another.

The tablet will be perceived by the TV as an information carrier or as a regular flash drive. That is, you can view movies, photos and listen to music, reproducing them from internal memory Tablet.

How to connect a tablet to a TV via USB if there is no full-fledged USB input on your mobile device? Not all gadgets are equipped with a USB port. To do this, use adapters to Micro-USB.

Is it possible to connect the tablet to the old TV? Outdated models do not possess HDMI nor USB connectors. Old TVs are offered for connecting RCA ports, people known as "tulips". If you need to connect the tablet and such an old technique, you use a special converter - adapter (micro-HDMI adapter), setting up different types Information transfer. It will allow you to connect to the TV without problems.

Such adapters have input and output. You must connect the tablet to the HDMI wire and paste into the input. Composite cables ("Tulips") are connected to the output: two sound (red and white) and one video skill (yellow). They go to the TV.

Such converters are connected to both American and European television systems due to the NTSC / PAL switch. In Russia, uses the PAL system.

Installations additional drivers No need. The work will begin with the inclusion of the tablet.

Often for mobile devices Requires additional controllers that will allow you to connect to the converter. They perform the feature of additional adapters between Micro-USB and the HDMI cable.

Included from the device (both the converter and controller) there is a cablemini-USB to recharge it.

Video instruction

This video shows the process of connecting the tablet via HDMI cable.

In contact with