Automatic Internet Connection Task Scheduler. How to make an automatic internet connection. Use network connections

Connect to the network manually at each entrance to the system tedious and rapidly bored. Therefore, it is important to know the user to know that in all versions of Windows there are methods that allow you to configure the computer so that it automatically connected to the Internet.

Why activate carotching

The only reason to activate the automatic connection to the Internet is to accelerate the transition process to work with the network. Perhaps some of the programs you use are started when the computer is turned on and require an Internet connection to continue. Auto connection will allow them to immediately access the network, and not wait until it is activated manually.

Consider if your traffic is limited, then automatic connection It may negatively affect its spending. For example, if you turn on the computer, a connection will be established, and some program will start loading the components you need without notifying it.

Activation of automatic connection

There are several ways to make the system to install the connection automatically each time. The instructions below are suitable as windows users 7 and Windows 10 users. Some steps may differ, but all discrepancies will be indicated.

Using task planning

  1. Expand the task scheduler. You can find it through the search engine string.

    Find and open the task scheduler to start activation

  2. Navigate to creating a simple task by selecting the appropriate item in the list of action.

    Click on the "Create simple task... "to start the same process

  3. Push any name in the appropriate graph. It will be better if it describes the action that is performed by this task.

    We specify the name of the task (better if it describes the action that this task is performed)

  4. At the Trigger Task Trigger, select the start time "when entering Windows".

    We indicate that the task is performed when launch Windows, noting the corresponding item

  5. In the action selection step, specify the "Run program" item.

    We specify that the task launches the program by selecting the item of the same name

  6. In the scenario name string, RASDIAL. In the Argument field, enter the sequence in this form: "Network name" login password. The name must be enclosed in quotes, all values \u200b\u200bare separated by spaces.

    In the script field, we prescribe the RASDIAL string, and in the arguments indicate the network name, login and password

  7. Check if all data is entered correctly, and complete the procedure. Finish, you can restart the computer, and when logging in to the Internet will connect automatically.

    We check whether the data is specified correctly, and complete the creation of the task

Creating a BAT file

In any folder, create an ordinary text Document And write down the following lines into it:

  • cD% Systemroot% \\ System32;
  • sTART RASDIAL * Title_nate * * user_name * * Password.

Create text file and enter the team to remake it in the BAT file

Name of the network, login and password are prescribed without quotes, but with spaces.

Change the name of the received file to "Name Network_Autostart", but it should end. Bat. That is, you should change the file format with TXT to Bat. After that, copy it to the final subfolder Startup, having passed the next way:

  • C: \\ ProgramData;
  • Microsoft;
  • Windows;
  • Start Menu;
  • Programs;
  • Startup.

Move the BAT file with the command to the Startup folder to activate the automatic connection.

Registry change


Video: Activation of automatic connection in Windows 7, 10

Running service

  1. Through the system search, locate the command line, click on it right-click mice to open context menuAnd select the startup from the administrator.

    Calling the context menu by right-click, open the command line with administrator rights

  2. Run: SC CREATE STARTVPN START \u003d AUTO BINPATH \u003d "RASDIAL * Title_nate * * username * * Password *» DisplayName \u003d "StartVPN" Depend \u003d LanManWorkStation OBJ \u003d "NT Authority \\ Localservice". All values \u200b\u200bare indicated without stars, the separation is carried out using spaces.

    We execute the SC CREATE STARTVPN START \u003d AUTO BINPATH \u003d "RASDIAL * * Title * * * user_name * * Password *» DisplayName \u003d "StartVPN" Depend \u003d LanManWorkStation OBJ \u003d "NT Authority \\ Localservice"

  3. Expand the "Run" window by closing the Win + R combination, and after the service.msc command in it.

    We execute the SERVICE.MSC command to open the list of services.

  4. A list of available services opens. Lay the process you have created and enter its properties. In the start type, set the value "Automatically".

    In the "Startup Type" column, select the value "automatically"

  5. In the Recovery tab for all cases of failure, specify the "Restart Service" function. Finish, restarting the computer, you will see that the system automatically connects to the Internet if the network you specified is available.

    We indicate that with any failure, you must restart the service

Setting the Passionate Network and Using the Startup folder

If you are using connecting PPPOE, L2TP or any other requiring password entry for each connection attempt, you can use the following way:

  1. Being in the control panel, select the " Network connections"(Windows 7) or" View Network Connections "(Windows 10).

    Among the elements of the control panel, we find and open the section "View network connections"

  2. After calling the context menu of the connection you right, select "Properties", in the window that opens, click on the "Properties" button.

    Open the connection properties and click on the button "Properties"

  3. Going to the "Parameters" tab, remove the checkbox from the "Request, password ..." function. Save the changes made.

    Clean the checkbox from the function "Request a name, password, certificate, etc." and click OK to confirm the changes

  4. Return to the list of available networks, select the one that you just configured, click on it right key and select the "Create Label" action.

    Let's place the created shortcut in the Startup folder

  • C: \\ ProgramData \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup - Windows 10;
  • C: \\ Users \\ Your_In / APPDATA \\ ROAMING \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup - Windows 7.

Ready, the label is responsible for connecting to the Internet, and since it has been transferred to the "Auto-loading" folder, the task started by them will start immediately after entering the user in the system.

What to do if the pellet network does not work

If performing the actions described above, you encountered the fact that the network does not work, that is, there is no connection to the Internet, you must re-configure:

  1. Opening the control panel, go to the network management center.

    We enter the name of the network, login and password

Make a computer to connect to the network yourself can be in several ways: via BAT file, registry, network management, service or task. The only thing that will be needed is to know the connection name, as well as the login and password from the account, allowing you to log in.

What needs to be done in order to automatically connect the Internet when the computer is turned on (the way for Windows owners). Will the method work on Linux, Mac OC, etc. - There was no need to check the need.

Little lyrics: Connecting an Internet manually, the average user spends about 15 seconds. Suppose it does it daily. In the year, 365 days, multiply, it comes out: 5475 seconds, or 1,5 Hour! Is it really possible to spend with a greater benefit?

So, there are several options automatic launch Internet on windows 7.

Recipe number 1. or "banal." Everyone writes about him, and you probably saw his variety on other Ineta's buds. Anyway, here it is:

1. Connect to the Internet (in the settings you need to put a daw on the "save password")

2. Then go to "Network Connections", we are looking for "Virtual private network VPN "and click the PCM on the Internet icon. We go to the "Properties", item "Parameters. (Screen below). Exhibiting similar connection settings. Click "OK"

3. I again click on the Internet icon, but this time I do not go to the "properties", but click "create a shortcut". Or stupidly dragging the icon itself to the desktop, closing for this LKM. Never mind.

4. We go to the startup (located at the "Start" address - "All Programs" - "Autoload", that on Windows XP, that on the seven - the same)

5. Restart the computer.

Recipe number 2. It assumes the creation of a file with extension.Bat and the subsequent throwing on it (again) in the autoload.

At the same time in the file itself it is necessary to register next line (Naturally replacing current values \u200b\u200bin your own):

@START RASDIAL CON 000 111\u003e NUL

Son - you need to change the name of your connection, the numbers "000" - on the login, and "111" to the password.

Add: Work through the usual notebook, then when saving a document, change the extension on V.Bat

Automatic internet launch in Windows 7. Method number 3.

Previous methods let both workers, but they are not entirely correct. Introducing the "right" solution to the means of the Windows itself! (Tadadadam, drum fraction)

We go into the control panel, item "Center for network management and something else",

after clicking the LKM in the left menu (as in the picture below), click on the "Change of Adapter Settings"

Step 1. In the list of icons, we are looking for your own online. PCM on it, properties, "Parameters" tab, put a tank to "request a password name", the rest can be left blank.

Step 2. Through the control panel go (here I apologize, I finish an article from the tablet, items may be called a little different). In short, in the "Security Center, then" Observer Properties ", interests the Connection tab. It is necessary to put a daws in front of "always use the default connection". Then, in the settings, put a tank: "Automatic definition of parameters".

If the login with the password coincided, then everything is OK, save the changes. Mission accomplished.

Interesting blog:

A common PPPoE Internet connection technology requires user authorization when connecting to a provider. Using the router makes this procedure invisible. One-minded, connection occurs without user participation. For live connection The operation has to be performed independently. You can bypass this procedure by adjusting the Internet in Windows to Windows.

High-speed connections to which PPPOE refers are performed in Windows from the Network Management Center. IN different versions It has minor differences in the design of the interface, but the procedure for setting changes has not undergone.

Universal way

This method is suitable for all versions of Windows. Call the "Run" dialog box and enter the command shown in the screenshot.

A classic control panel is launched. We find and open the network management center.

The connection options menu opens. Select the top item and press the "Next" button to continue.

In the next window, we are immediately invited to configure need type Connections. If in the arrow marked place to put a tick, all available options will open.

Filling parameters The most responsible step when creating a new connection. We enter the name and password received from the provider. We put a tick in the save field. We ask the Latin a short name for the connection. In the future, we will use it when we configure automatic Internet connection. In the fifth point, check mark at will. If the user on the PC one, it is not needed. When you conceived to create separate profiles for yourself, wives and children are necessary. Complete the work by clicking on the "Connect" button.

Using the entered parameters, the system establishes communication with the provider server.

Connection is completed, you can go online.

The next time you turn on the PC, the connection can be activated from the system tray.

In Windows 10, the operation will take longer. You need to call the notification menu. Select network connection.

In the unfolding menu, open the created PPPoE connection.

Activate the connection in the system parameters.

In Windows 10. chief flaw This type of connection is manifested in all its glory. The Internet does not connect automatically, and the number of actions necessary to turn on the compound increased.

Automation

As you can see, the most inconveniences are the users of new versions of the OS. Therefore, as an example, we will consider the auto connection between the Internet in Windows 10.

Most. simple option is the use of batch file Bat.managing the command interpreter OS. To create it, we will need text editor "Notepad", which is part of all versions of Windows. Opening new document, I copy the following lines to it:

cD% Systemroot% \\ System32

startraSdial

For 64-bit versions, replace "System32" to "SYSWOW64". In the second line we introduce the data of the used compound, separating them with spaces:

skyNet.ivanov.password.

As a result, the text shown in the following screenshot should be obtained.

Open the "File" menu and select the marked point.

Save the file with the BAT extension to the desktop to be at hand.

Open system folder Autoloading by copying the following path in the menu:

% ProgramData% \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup

Move the created BAT file from the desktop in the opened folder. The system will ask for confirmation of authority to perform this operation.

Created batch file. will be processed at the time of booting OS, running automatic PPPOE connection.

Task Manager

Using systemic windows scheduler Allows you to create a rule of processing the recurring events in the system. We use it to implement automatic inclusion Internet when starting a PC.

Activate the scheduler to the command entered into the "Run" dialog box.

In the window that opens, select a simple task wizard and execute its instructions.

We ask the name of the process, if desired filling the description.

Select the start when you turn on the computer.

As an action, mark the launch of the program.

Using the button specified by the arrow, select the file "rasdial.exe". The placement directory is determined by the battery of the OS, as well as when creating a BAT file. In the argument field, indicate the name of the connection, login and password through the space.

We view a summary. At this stage, you can go back to change the set parameters. Complete the work by clicking on the "Finish" button.

In the configuration of the high-speed connection, the autorun will be performed for the current user. You can adjust additional task parameters by opening the planner library.

Creating an additional service

Taking advantage of the interface command line, You can create your own service that will start when the PC is booted along with the system. We launch the CMD shell with administrator rights and enter into it:

sC CREATE SKYNET START \u003d AUTO BINPATH \u003d "RASDIAL SKYNET IVANOV PASSWORD" DISPLAYNAME \u003d "SKYNET" DEPEND \u003d LANMANWORKSTATION OBJ \u003d "NT AUTHORITY \\ LOCALSERVICE"

After receiving a notice of successful creation of a new service, open the service console.

We are looking for the created service according to the specified name. Call the context menu to manually edit parameters.

On the first tab, change the start type as shown in the screenshot and activate the service.

On the Recovery tab, change the parameters of actions in case of failure, translating them to restart mode. Apply the changes made and closed the parameter window by pressing the "OK" button.

When the created service is not needed, it can be deleted by command SC DELETE SKYNET.

Windows 10 users who use the PowerShell shell by default to avoid problems with the command syntax, will also have to use the command prompt.

Registry editor

Direct making changes to system registry Also allows you to achieve the desired effect. To configure auto-connection to the Internet, you will need to independently create additional key. Open the registry editor using the command shown in the screenshot.

To work the key to work for any PC user, open the HKLM branch and go to the designated path to the "RUN" section. Call the context menu, deploy it and select the creation of a string parameter. We ask him the name "SkyNet".

Open the key to edit. We enter the name of the connection, login and password in the "value" field. Data make a solid string without spaces.

As a result, the key must acquire the following form.

Created parameters will take effect after rebooting the computer. Perform input B. account And make sure the operating network is in stock.

Finally

By selecting the appropriate method, you can implement the Internet connection in Windows 7 and higher, without resorting to third-party software.

Many providers worldwide offer their Internet services through the so-called high-speed PPPoE connection (Point-to-Point Protocol Over Ethernet). To communicate with the Internet via PPPOE, providers usually give their clients a unique username and password that are necessary to connect to their networks.

The lack of PPPOE is to run the connection manually each time after the computer is turned on. This is an annoying inconvenience, which many users would like to forget once and forever. In this article, I will talk about the settings with which the computer with such a connection will be connected to the Internet automatically during startup.

1. Launch task scheduler

First of all, we need to launch a regular task scheduler. The simplest I. fast way Make it is to use the system search window. Enter the first few key request letters, and then click on the job scheduler element in the search results.

In Windows 10, the task scheduler can also be run from the Start menu: All applications \\ Administration ToolsWindows.

In the control panel, it is located on the next way: Control Panel \\ System and Security \\ Administration.

Regardless of the selected method, as a result, you will see this window:

2. Planning an automatic connection when entering the system

Now we need to schedule an automatic connection to the Internet each time you enter the system.

In the task scheduler window on the right click "Create a simple task."

In the task creation wizard window, enter the name of the task, for example, Avtodozon. You can also enter a description, but it is not at all. Click "Next".

Next, you need to choose when our task should be performed specifically. Since our goal is that the PPPoE connection is automatically connected to the Internet each time you enter the system, select "when entering Windows". Click "Next".

The penultimate stage of creating a task is the choice of action. We need the PPPoe connection to start automatically with Windows. Accordingly, choose "Run the program". Click "Next".

And now the most important part of the process is to configure the script that will be automatically executed.

In order for the system automatically connected to the Internet via PPPoE, you must enter the following information:

  • In the program or script field, enter the command rasdial.
  • The "Add Arguments" field (optional) must contain the connection name (in quotes), as well as the username and password with a hyphen in front of them. For example, suppose your PPPoE connection is called Wwwand for connecting to it you use the username Ivan. and password 123456 . In this case, you must add the following arguments: " Www "Ivan 123456..

Field Work folder»Leave empty.

At the final stage you will see short description Created task. We click "Finish."

After closing the wizard, you will be returned to the main job scheduler window, where you will see that your task has been added to the list of other scheduled tasks.

3. Restart the computer and check

Finally, restart the computer to check the result of your actions. If all the steps were executed correctly, after rebooting the system should connect to the Internet automatically. Please note that from now on, each time the login log, the console window will appear on the screen, signaling the start of the connection process.

Excellent day!

  1. How to make an automatic internet connection In the absence of my router? My computer has installed two Windows 7 and Windows 8 operating systems, the Internet services provides Beeline provider, I want to connect automatically when the Internet is turned on automatically, for example, I turn on the computer and the Internet connected itself, and you do not need to press any Beeline labels. Himself, I tried numerous recommendations from the Internet, but did not help: 1) created a task using the task scheduler. 2) Created a BAT file (batch file) and placed it in the "Auto-loading" folder at C: \\ ProgramData \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup. 3) Created a switched connection and everything is useless. Especially alarming Windows 8, according to rumors, in it without a router to make such a connection is not at all possible.
  2. Hello Admin, Be kind, tell me, how to make an automatic internet connection When you start the Windows 8 operating system, the most important thing is that this method be simple and approached all existing Internet providers, for example: Beeline, House.ru, MTS, and so on.

How to make an automatic internet connection

Hi Friends, I often have to drag into my friends and after installing the operating system to configure the automatic Internet connection. In today's article, I will show you how it can be done if you have not bought a router. In fact, there are a lot of options and one could write with dozen instructions, but almost all of them are inoperable in the new Windows 8.1 operating system.

But there is one universal, and most importantly simple way working with all providers and in all the most common operating windows systems 7 and Windows 8, and even Windows XP. We will use little-known windows features, Rasdial team, it is she performs automatic set Numbers for Microsoft customers.

Note: After successfully creating an automatic connection of the Internet, thump and your Opera, Mozilla or Google Chrome. Also will start automatically!

We will create a string parameter in the registry and indicate in it the name of our provider, login and password, then reboot and automatically log in.

So, before work, just in case, create a system recovery point, then click the right mouse button in the lower left corner and select "Run",

We enter the command "Regedit" in the input field and click OK.

We are in the registry, here we find the section responsible for autoload

For all users:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ Currentversion \\ Run

or for the current user:

HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Run

In my case for the current user

HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\RUN.

Click on an empty place section with the right mouse and select Create -\u003e String Parameter,

ATTENTION!

The method works on 8.1, only under the condition that the connection name consists of one word.

Will work - Beeline

Will not work - Beeline Internet.

Click on the right mouse you just created and choose to change,

Then, if your Beeline provider, in the value field, write:

rASDIAL SPACE "The name of your connection in quotes, which can be viewed in the center of network management and shared access-\u003e Change the adapter parameters, for example Beeline,"