Install a network drive. Connecting a network disk via Net Use. Video - Working with Net Use Examples Connection \\ Disable Network Discs

The NET Use command line is used to connect and disconnect from public network resources (disks) and to display information about current connections. When the command is used without parameters, a list of all connections is displayed. this computer. From myself I want to note that the Net Use command can also be used when working with Windows 10.

Net Use command syntax

To display the help for the specified NET command, enter the command net Help Use..

  1. nET USE [(Support_name | *)] [\\\\_name_name \\ Resource [\\ Tom]] [(password | *)]]] username] [(/ Delete | / Persistent: (YES | NO))]
  2. nET Use [Defense Name]
  3. net Use where
  • Name of device - Specifies the resource name when connected or device name when disabled. There are two types of device names: names for disk devices (that is, wheels with lettering symbols From D: to z :) and for printers (respectively, from LPT1: to LPT3 :). Insert sprocket (*) instead of name specific device Provide the appropriation to such a device in the nearest available name.
  • \\\\computer_name \\ Name Resens - Specifies the server name and shared resource. If the "Compact_name" parameter contains spaces, all computer name from a double reverse line (\\\\) to the end (for example, "\\\\ Computer Name \\ Share Name") must be enclosed in direct quotes ("). The computer name may have a length from 1 to 15 characters.
  • \\Tom - Specifies the name of the volume of the NetWare system. To connect to NetWare servers, you must install and start a client for NetWare networks.
  • Password - Specifies the password required to connect to a common resource. Enter the asterisk (*) to output invitations to enter the password. When entering the keyboard, the password characters are not displayed on the screen.
  • / user. - Specifies another username to connect to a shared resource.
  • domain name - Specifies the name of another domain. The "Domen name" parameter skip leads to the fact that the NET Use command uses the domain name specified when logging into the system.
  • username - Specifies the username for the connection.
  • domen name _S_Text - Indicates the full name of the domain in which there is account User.
  • / Savecred. - Saves the entered credentials for further use.
  • / Smartcard. - Specifies the need to read credentials from a smart card for network connection. If there are multiple smart cards, a request will be requested to specify one of them.
  • / Delete. - cancels the specified network connection. If the connection is specified with the sprocket symbol (*), all network connections will be canceled.
  • / Persistent: (YES | NO) - Manages permanent network connections. By default, the last value is taken. Connections without a device are not constant. Selecting the value of YES leads to the preservation of all existing connections and restore them with the next connection. If you select NO, the executable and subsequent connections are not saved. Existing connections are restored at the next log in. To delete permanent connections, the / delete key is used.
  • / Home. - Connects the user to its main catalog.

As you can see, the syntax of the team is quite long, but it should be noted that in practice not all of its parameters are used.

Thus, the Net Use command connects or disables the computer from the overall resource. Although the Net Use command has a rather extensive syntax in real life, not all of its parameters are used. Let's try to understand this popular team and bring real exampleswho use the work.

  • To display information about current connections, enter the command net Use..
  • To connect the network disk by the NET Use command with the name of the z: From the public directory of Public2 $ computers \\\\ Nuclear should enter the command - nET USE Z: \\\\ Nuclear \\ Public2 $
  • EXAMPLE NET USE DELETE. To turn off from the \\\\ Nuclear \\ Public2 $ directory connected with a network disk with the name of the disk Z: serves as a command - nET USE Z: / Delete
  • To connect general folder Backup $ with Nuclear computer under the user Administrator as if it were connected from the Podryad.local domain, you should enter - net Use D: \\\\ Nuclear \\ Backup $ /User :Podryad.local\\administrator
  • In the event that the name of the computer consists of several words and there are spaces between them, then all the name of the computer from the double reverse line must be imprisoned in direct quotes. For example, to connect to a shared share1 resource on the server 1 server, the command will be viewed - nET USE K: \\\\ "Server 1" \\ Share1
  • Recovery current connections With the next inputs to the network, regardless of future changes, the team is served nET USE / PERSISTENT: YES.

Video - Working with Net Use Examples Connection \\ Disable Network Discs

And so for the beginning we will define what a network drive is and why it is needed. Network disk is practically the same as the usual hDDwhich stands in the computer. But the main difference is that it is physically in another computer or on the server. For non-dedicated users, the network drive will not differ from the disk which is installed in the computer.

The only thing they can see is the fact that the recording speed or reading data from the network disk will be significantly lower. But it will be driving from the speed of the local network. Most often, the network drive uses in large organizations in which I have been working in programs with large databases. The database itself lies on the server, and users only cost the client and they connect to the database through the network drive. It is very convenient and safe. But it is possible to connect a network disk just to exchange documents between computers.
In order to connect a network drive, you need to perform several not difficult actions that in all operating systems Windows is almost the same. IN this example We will connect and disable the network drive in Windows 7.

Open my computer.

Enter the address of the network disk and select the letter of the volume. We put a tick on the contrary to restore when entering the system. This is necessary in order for the network drive to be connected each time when the system is launched. If you do not put a checkbox after rebooting you will disappear.

Press ready. After that, you must open a network drive.

Next, let's go to my computer and check whether the network disk appeared in red. So we all connected a network drive. To disable the network drive, you need to click on it. right-click And choose to disconnect further click OK.

Now you have learned to connect and disable network drives. You can connect them any quantity. Agree everything is not so difficult.

If you have a local network, then the presence of network folders in it is quite a natural phenomenon. File storages, separate shared directories on computers. However, each time to open in a network environment required computer And to look for there the desired catalog can be very tedious. Specifically for such and a number of other cases, in Windows 7 supported the ability to create a network drive for quick access to the catalogs on the network. But, about how to do it right, not everyone knows. Therefore, as part of this article, I will tell you how to connect a network drive in Windows 7, as well as there are nuances here.

From the point of view of use, the network disc is no different from a regular disk. You can also record, copy and move files. The only difference is the speed of operations, which should always be remembered. It is less, since the files are not read directly from the dick, but are transmitted over the network. In addition, it is worth considering that if the local network is loaded, for example, several people will use such a disk, then the speed can be quite small.

Now, consider how to connect a network drive in Windows 7 through the standard interface:

1. Open the conductor and go to "Computer". It can also be done with the combination "WinKey ( Windows key) + E ".

2. In the top menu, click on "Connect the Network Disk" item.

3. In the window that opens, as shown in the figure above, you must specify the network disk letter, then select a network directory. For example, "\\\\ computer1 \\ video" or "\\\\ 192.168.0.112 \\ video". Also you can specify whether you need to restore this disk after rebooting Windows. If necessary, specify the connection credentials.

4. Press the "Done" button downstairs.

5. Network disk will be available for use.

As you can see, create a network disk using standard windows interface 7 is simple enough, however, it is always helpful to know alternative methods.

Many tools in Windows 7 are available from the command line, which is sometimes very convenient and much faster in use. Therefore, now consider how to connect a network disk from the console. To do this, we will need a "NET" command with the "Use" parameter. And this actions can be done using this combination:

1. Connecting a network disk. Open command line, enter the following command and click Enter:

net Use Z: \\\\ Addr \\ Folder

where " net Use."- This is the team itself," Z:"- This is the desired drive letter (double jacks are required)," \\\\ Addr \\ Folder"- This is the address of the network directory.

Network disk will be created.

2. Installation automatic connection disks for windows reboot 7 . So, you connected the network drive. However, the moment that the disk will or will not connect after rebooting the computer, remains unknown (the last execution of the installation command is taken automatic recovery). Therefore, it should be clearly indicated for which it is necessary to enter the following command:

nET USE / PERSISTENT: YES

where " net Use."- This is the team itself, and" / Persistent: yes"This is a parameter that indicates that the network drive must be connected with each system loading. Please note that this setting It applies to the last connected disk and becomes "default" for all subsequent. If you want to indicate that the disk does not need to be restored, then instead " / Persistent: yes"You must specify" / Persistent: NO".

3. Deleting a network disk. Network discs can be temporary, so it is useful to know how to delete them. And here is the relevant team:

nET USE Z: / Delete

where " net Use."- This is the team itself," Z:"- This is a network drive," / Delete."- a parameter that indicates that this network drive must be deleted.

As you can see, use the "NET" command with the "Use" parameter to connect the network disk is not much more complicated than using standard interface Windows 7. In addition, with this combination, you can always create bat files for fast settings Network disks.

Shared folder in Windows 10 network drive

So how to connect a network disk on Windows 10? How to create we already know, but it is not very convenient - to search in the network surrounding the necessary shared folder, especially if there are many computers. It is much easier that it is displayed in the form separate diskwhich appears on a par with your disk "C" when loading the system.

To connect networks hard disk On Windows 10, the first thing must be allowed general access to files and folders on the computer. To do this, click right-click on the Start menu and go to "Network Connections"


Here in the left column click on "Change sharing parameters"

  • Enable network detection
  • Enable sharing files and printers
  • Allow Windows to control the connection of the home group

Connecting the Windows 10 network disk

It was a preparatory stage - now go to the main issue how to connect network windows disk 10?
Elya This needs to open the conductor and in the left column, where the wheels of the disks and folders, find the link "My computer" - click on it right-click and select the "Connect a network drive ..." item.

In the winding after this, the window is chosen the letter for our future Windows network disk, for example "x".


After selecting the folder, leave the "Restore when logging into the system" so that after turning off the computer, each time it is not created again. And click "OK".

Now when entering the conductor in "Computer" among other systemic hard disks We can see in the "Network Placement" section disk "Z". You can get on it, provided that the computer on which this network disk folder is posted is included.

Connecting a network disk on Windows XP

The device for connecting a network disk on Windows XP is similar to the above. Therefore, we describe here the connection method directly from the "Network Surrounding" section.

We go to the "Start\u003e Network Surroundings" and find the general folder you need on one of the computers of the local network. By right-clicking on it and select the menu item "Connect a network drive". You can also simply select the "Service" item in the top menu and select the same section.



Now if you go to "My Computer", then will appear hard drivesAs well as network folders connected as network drives designated by separate icons.


That's all. For those who still do not understand what, I bring a video:

Thank you! Did not help

Windows 7 is a wise and practical solution on your part. Now I will explain why. He who organized in his house local network, Constantly uses certain data that are on other computers, using this very local network.

In order for the convenience of your work to raise, you can connect a power disk to your computer. What it is? This is just a network folder that is connected in such a way that your computer or laptop will see it as well as your own hard drives. He is assigned a certain letter, after which you can simply forget that it is really located on another device.

In order for you to attach Windows 7 network drive to your computer or laptop, open the standard conductor, which is in the Standard folder. To do this, click the Start button, select the "All Programs" section in the menu, where to deploy the "Standard" tab. There will be the necessary "Explorer", and launch it. When you make it, find at the top of the menu called "Service". Open it and select "Disc". At this point, the corresponding window must be opened in which we will set the necessary settings with you.

The first thing to do is choose the desired letter in the unfolded window. As soon as you do it, your network disk will assign it. I note that you can only choose the letter that is not yet involved by other devices (hard disks drived by CDs, drives, etc.). After that, you will need to specify the exact location of the directory. You must register the desired path to the folder you want to use as a network drive. It can be done different ways. For example, you can enter the exact address using the keyboard, and you can locate this resource by pressing the "Overview" button. Last method It will be much more convenient and faster.

Important condition: during the implementation of this procedure, the device on which this folder is physically located must be included. Otherwise, you will not succeed, because your computer or laptop will simply be able to see the necessary directory.

In the case when you want to connect on behalf of any other user, you will need to check the checkbox opposite the field of using other credentials. After that, you will need to fill in all the necessary data of a specific user in the window that appears in front of you immediately after you confirm your choice using the "Finish" button.

Upon completion of all the above actions, in your window called "Computer", a group that is called "Network Placements" should be displayed. Your new network folder will be reflected there.

Disabling the network disk is made like a similar method. Call the Explorer window through the "Service" menu select the disable function of the network drive. In the window that appears, select a disk in which you no longer need, and confirm by clicking on "OK".