Disable the inscription Test mode Windows 10. Enable and disable Windows Test Mode. System failure, or how to delete a "test mode" alert on the "desktop"

In the process of working at a computer, sometimes there are situations (for example, when connecting Android devices for flashing them) When you want to install specific and unsigned hardware drivers. In this case, it is best to use the Windows test mode. Consider this question more.

Turn on the test mode on the Windows command prompt

To go to test mode successfully, you must first turn off the " Secure Boot (Safe download) "in the BIOS, so before starting you need to go to your computer. For various manufacturers motherboards The settings will be somewhat different, we will understand how to disconnect the "Secure Boot" on the example of the computer you have motherboard ASUS.

So: Run BIOS (UEFI) and go to the "Load" section. It goes to the "Safe Loading" point and click it with the mouse.

A small menu "OS type" menu appears, in which they select "Other OS".

We save the parameters and overload. If the "Safe Load" menu is missing in the menu, it means it is already disconnected at the hardware level and the actions described above are not needed.

Now you can run the "dozen" in test mode to remove some OS restrictions, in particular those that are superimposed when installing unsigned drivers. Run (with administrative rights), enter the command:

bCDEDIT.EXE -Set LoadOptions Disable_integrity_Checks

bCDedit. . eXE — sET. Testsigning. ON.

We are waiting for the end of executing each of the commands after which the system will give the appropriate notification.

Close the window, overload. After rebooting next to the notification panel, we will see the inscription reminiscent of the mode in which the operating system now works.

You can disable test mode in a similar way, only the command syntax will be a little different:

bCDedit. . eXE — sET. Testsigning. Off

Sometimes users faced the fact that the inscription appears at the bottom of the screen, which states that the system is running in test mode. At the same time, there is also information about the editorial board and the assembly number. Of course, users want to remove this inscription as quickly as possible.

Test mode usually says that in the system disabled check digital signatures For drivers, the same error may appear in independent assemblieswhich are blocked by the one or another function of Windows. Thus, we can say that some security features are disabled in test mode, which allows you to install unverified programs.

To turn on, you can open command line (Win + R and enter CMD) and write the operator bCDEDITIT.EXE -SET Testsigning ON /

Turning off through the command line

To disable the mode, you can also use the command line to be launched on behalf of the administrator. Make it by clicking right-click Starting and selecting the desired item. Further will only enter and execute the operator bCDEDIT.EXE -SET Testsigning Off.

In some cases, the command may not be executed. In this case, you will need to restart the computer, with a new inclusion, you will need to go to BIOS or UEFI, it can be done by pressing when starting F2 or DEL. Here you should find a feature called secureboot. and turn it off. After that, you can start the system again and apply the command when everything is completed, the option can be turned on again.

After performing all actions, the inscription should disappear. However, in case the user has unsigned drivers, and others are not, the equipment for which they were installed can stop working. In this case, it will be better do not disable the mode Before the appearance of official utilities, or you can use another way and simply hide the inscription without turning the mode itself.

Using Universal Watermark Disabler

When using this method, the test mode itself, like all unsigned drivers, will continue to work on the computer, it will be eliminated only the inscription that is notified that it is on on the device. To begin with, you will need to download the utility to your computer, you can do this on the site https://winaero.com/download.php?view.1794. After that it will be necessary to launch it on behalf of the administratorThe window appears below.

Will remain click on theinstallAfter that, the window will jump out, in which the user will ask about whether he is confident that it is necessary to run the program on the unverified assembly, it should be agreed here.

After some time, the message is displayed that it is necessary to restart the computer, immediately after pressing OK it will be restarted, so it should be preserved all the work.

The next time you start the inscription system will not be seen. However, it is not easy to keep the mode on, yet, the programs without digital signatures can be dangerous And to carry viral software. Also, when you enabled mode, you can install untested drivers, due to which the computer will lag and brake, because they simply will not be suitable for current equipment or will contain errors.

So, at the first opportunity, it is worth establishing an official software that has all the necessary signatures, after which, immediately disable the test mode and continue to work in the usual one.

Some users of the Windows 10 operating system are detected on their desktop mysterious inscription "Test mode". This inscription is in the lower right corner of the screen and reports that the system works in test mode.

Test mode is a mode in which Windows 10 operating system allows users to install and use drivers that are not signed by Microsoft. Usually this mode use software developers. If you suddenly have turned on this mode, you can disable it or simply remove the inscription "Test mode" from the desktop.

Test mode disabling in Windows 10

In order to disable the test mode in Windows 10 you will need. You can open it in different ways, the most reliable way that will work in any case, is the search in the Start menu. To do this, open the Start menu, enter the "CMD" command search, then right-click on the program found and select "Run on behalf of the administrator".

After that, before you should appear. Command line" The "Administrator" must be inscription in the window header, which indicates that the "command line" is running with administrator rights.

Now you can proceed to disconnect the test mode of Windows 10. For this you just need to execute the command " bCDEDIT.EXE -SET Testsigning Off"And restart the computer.

After executing this command and restart the computer, the test mode should disappear from the desktop.

How to remove the inscription "Test mode" from the desktop

If you need not disable the test mode, but simply remove the inscription "Test mode" from the desktop, then this can be done with free program Universal Watermark Disabler. This program Designed to remove various watermarks in operating systems Windows 8, Windows 8.1 and Windows 10. The developer declares that the program works in all windows assemblies Starting with Windows 8 Build 7850.

In order to hide the inscription "Test mode" using the Universal Watermark Disabler program, install and run on your computer. After starting this program, you will see a small window with the "Install" button.

Click this button and confirm the use of the program by pressing the "OK" button. After that, your computer will reboot, and the test mode will disappear from the desktop.

The hardware configuration of the computers to which Windows is installed can differ significantly on a variety of parameters, as the versions and editions themselves can be varied. It is for this reason that created under Windows applications Must be universal in terms of compatibility. So it usually happens, however, there are software, to start which a special mode is required, called testing mode.

What is the test mode and when it is activated

Test windows mode 10 can be consecrated to the state of "loyalty" of the system to softwarenot relevant electronic signatures. In this mode, the system reduces the level of security, which allows the administrator to establish unstable software. In addition, 64-bit systems have the ability to bypass certain security restrictions.

Under normal conditions, test mode, as a rule, is not activated by itself. It requires an appropriate user action or third-party program. The Windov works in Test Mode, says the inscription "Windows 10 ..." in the lower right corner of the monitor. The mode itself comes into force in the event of a disabling by the user in boot menu or deliberately inclusion with the help of a regular console tool bCDedit. or third-party utility Driver Signature Enforcement Overrider.

The text vane in the corner of the desktop may appear, although not immediately, in the modified Windows assemblies, if the author decided to deactivate some verification functions. Also the logo may not be marked by Microsoft systems manufactured. Below we will show how to exit the Windows 10 test mode, but for a start, let's see how to hide the annoying message from the screen indicating its activity.

How to remove the inscription "Test mode"

If you use a Test Mode on an ongoing basis, sooner or later, notifying the text next to the system tray will begin to delight and, most likely, you want to get rid of it. But how to remove the inscription "Test Mode" in Windows 10 in the lower right corner without leaving the mode itself? Very easy, just enough to use a small portable utility Universal Watermark Disabler.You can find without any problems on the Internet. Run it, click the "Install" button and confirm the action.

At the same time, the operation of the conductor will be completed, the screen will turn black, the user's session will automatically be completed, but when you enter the system again, you will see that the irritating inscription near the system tray disappeared. If after a while you want to return it, the program must be launched again and this time click the "Uninstall" button.

In the newest buildings of Windows 10, the correctness of the Universal Watermark Disabler is not guaranteed, for example, in Windows 10,16299, the utility issued an error "Failure with a remote call procedure", which, however, did not prevent her to safely hide the inscription. However, this method is the most versatile.

Windows 10 users also offered other ways to get rid of the logo, in particular, manipulation with files in the catalog % UserProfile% / APPDATA / Roaming / Microsoft / Windows / Themes. But as practice has shown, such actions rarely lead to desired resultOr their success is temporary.

How to disable test mode at all

Well, now it's time to find out how to turn off the test mode of Windows 10 in general. It is done very simply with the help of a console tool. bcdedit.exe.. The method herein works not only in the current tenth versions of Windows, but also in the "eight" and in the "seven". Run with the privileges of the administrator command the line or the PowerShell console and run the command in it. bCDEDIT.EXE -SET Testsigning OffAnd then restart the car. Ready, test mode is deactivated, and the notification text in the system tray will disappear.

There is, however, the low probability is that to disable Windows 10 test mode so immediately will not succeed. If, after executing the command, you will find that the vatumark still "decorates" the lower right corner of the desktop, go back to the console and perform first bCDEDITIT.EXE -SET LoadOptions Enable_integrity_ChecksAnd then repeat the command specified in the paragraph above.

This time the test mode should completely disconnect, as if it should disappear from the screen and its watermark.