Dir 300 c1e firmware. How to determine which router model you have

If you need DIR-300 firmware, then here you will find all the information you need. There are a few things to note:

If during the flashing you have a power outage, then there is a chance to break the router. So first, make sure the electricity is stable and the power cables are working properly. It is possible to connect D-link DIR 300 via a UPS for the duration of the firmware.
Updating the firmware yourself will void your warranty.

Why might an update be needed? Sometimes you don't even need an update, but reinstall an existing firmware version. Causes:

The Internet is slow and buggy.
New functions are required, which have appeared in the new version of the software.

Firmware is like a driver or operating system for a router. Firmware written to the permanent memory of the device. First you need to download it.

Brief instruction

In short, the very essence of how to reflash:

Download the firmware for D-link DIR 300 from ftp.dlink.ru.
Go to the router page 192.168.1.1 (or 192.168.0.1).
Head to the Maintenance section, then Firmware Update.
Select the firmware file, click "Upload".
Wait 2 minutes while the router installs the firmware. Everything.

Now everything is the same, but in more detail.

Download firmware

It weighs only a few megabytes. In the address bar, write the address dlink.ru, then go to the official website of the router developer, this is ftp with firmware.
In a folder called pub, find the Router section.

After that, find the folder with the firmware for your model and revision of the router, in our example it is DIR-300_NRU.

Next, head to the Firmware folder.

Now you need to find out the revision of the DIR router. You need to take your router, turn it over, and see what is written on the sticker on the bottom side.
In this case it's B1, you might have A1 / B1 / C1 / D1 / B3 / B5 / B7 / B6.

Having opened the folder on ftp called Firmware, select the partition that corresponds to your model of the DIR300 router.

Download the firmware. It is a small file with a bin extension.

Connecting the router to a PC

Connect D-link to your computer via patchcord. Can be flashed from regular stationary PCs, laptops and netbooks. Turn on your router. You need to check your network setup.

In Win7, go to "Start", then to "Control Panel", then "View network status and tasks."
Find the link "Changes to adapter parameters" in the left menu. Find the icon for connecting by local. network, go to the connection properties.
A window will open, select there protocol version 4 (TCP / IPv4) and click the "Properties" button.

On the "General" tab, see if the settings are set: "Obtain an IP address automatically" and "Obtain DNS server address automatically".

Now directly to the firmware update.

Flashing

Open your browser, write 192.168.1.1 instead of the site address, you will go to the page generated by the router.
Enter your username and password to access the DIR 300 settings. If you have not set a password, then just write admin.
On the router's page, you can find out the revision version (marked with a light green arrow at the top), this is necessary in case your sticker on the bottom of the router is worn or unstuck.
Go to the "Maintenance" section, then to "Firmware Update. Then go down to "Firmware upgrade", then "Select file".
Find the downloaded official firmware from D-link on your computer. Then click "Upload".

The firmware update of the router will start, it will take exactly 2 minutes. Do not unplug the router at this time, otherwise it may cause damage.

When the update is over, you will be redirected to the login and password window.
Look at the top line, if you updated the firmware to a new version, then there should be changes. If you just flashed (by analogy, like reinstalling Windows), then the same firmware version number will be waiting for you.

When the firmware of the DIR-300 router is reinstalled, the Internet settings do not change. You can resume using your computer immediately.

D-Link DIR-300 C1 model firmware

To flash the D-Link DIR-300 C1 router, you need to download the firmware file (.bin) from here.

After that download the zip archive from here.

Make sure your router is connected to your computer (laptop or netbook) with a cable connection and not over Wi-Fi.
Unpack the downloaded zip archive on your computer and run the dcc.exe program.
After that, D-Link Click'n'Connect will start. In it, select "Connect and configure the device."

Update the software, it's easy - the tips will help. As a result, not the last, but working firmware for this model will be installed. If you are satisfied with the operation of the router, then you do not have to continue.

D-Link DIR-300 C1 update to the latest version

But if you want to update the D-Link DIR-300 C1 software to the latest firmware version, then ...

Go to the router settings, find the "System" section, and then "Software Update".
There, select the bin-file of the firmware (we downloaded it earlier).
Then click "Update" - wait for the standard 2 minutes for the update.

Error messages or router freezes may appear, then do not turn off the power, but wait another 5-10 minutes for the installation to complete correctly.

DIR 300 N150 revision D1

DIR 300 N150 D1 flashing using the example of firmware version 2.5.4 with the new Air web interface.

Go to the settings in the usual way, you will see the "Home / Information" page, where you can see the exact model name and firmware version.

To install a new or reinstall an old firmware, click on its version, the "System / Firmware update" page will open.
Use the "Browse" button to select the update file (previously downloaded from here).
Click Update. Waiting 2 minutes.

This is what the firmware file looks like on the manufacturer's ftp server

Restore settings

If you have failed to flash DIR-300, you can restore the factory settings of the router.

The simplest thing is to use the RESET button on the router case; you will need a toothpick, since the button is recessed into the case. Press it for 10 seconds, release it, after that the router will reboot and start with zero settings.
You can also use the corresponding item in the web interface settings menu.

You have learned how to install the official firmware on a DIR 300 router (revisions A1 / B1 / C1 / D1 / B3 / B5 / B7 / B6). Also on our website you can read how to set up the Internet on the D-link DIR 300 router.

One of the latest models of D-Link routers, namely the DIR-300 C1, among other things, is known for the fact that not everyone can update the firmware of this router. When you enter the web-based configuration interface of DIR-300 C1 wireless router and try to install a new firmware file in the "Firmware update" section, upon completion of the process, the firmware version of the router remains the same. In this manual, the DIR-300 C1 firmware will be considered in as much detail as possible, from start to finish.

Downloading the required files from the official D-Link website

Before proceeding with the firmware of the DIR-300 C1 Wi-Fi router, follow the link http://ftp.dlink.ru/pub/Router/DIR-300A_C1/Firmware/ (this is the official website of D-Link, the folder with firmware for this version of the router), where you need:

After you have done this, connect the router to your computer using a wire, and not via Wi-Fi and, preferably, disconnect the provider's cable from it for the time of flashing. Thus, you should have the following configuration: the connector of the computer's or laptop's network card is connected with a wire to one of the LAN ports on the DIR-300 C1, the router is plugged into the outlet.

Also check the LAN connection settings on your computer. It is recommended that the parameters for obtaining the IP address and the DNS server address be set to "Automatic".

Using the Click'n'Connect program to flash the router

Unpack the archive downloaded from the D-Link website and run the dcc.exe file in it - the Click'N'Connect utility for configuring the D-Link router will start ^

However, this is not all. Despite the fact that a new firmware was installed on the router, it is not the latest and trouble-free working. However, thanks to this action, we can now install the latest router firmware using standard web interface tools.

DIR-300 C1 firmware via web interface

Without disconnecting the router or connecting new wires to it, go to the router settings panel, for which:

Enter 192.168.0.1 into the address bar of your browser
At the request for a username and password to enter the settings, enter: admin and admin, respectively

The next thing to do is at the bottom of the router settings page, click "Advanced settings", then, in the "System" item, click the "left" double arrow there and select the "Software update" link.

On the page that opens, designed to update the router software, click the "Browse" button and specify the path to the latest firmware.bin file that we downloaded earlier and click the "Update" button.

Now it remains to wait for the new firmware of the DIR-300 C1 router to be installed. It is worth noting here that during the firmware process the router may stop responding, the browser may show errors, the connection may be disconnected, etc. In any case, do not take any action either before the message that the firmware has been successfully updated, or within 10 minutes after you have started the firmware process. After that, just re-enter the 192.168.0.1 address into the address bar of your browser.

Good luck! If you have any questions, write in the comments.

An interesting subject of the IT industry caught my eye. Emerging as a promising alternative to the dir-300 B7, this router has played a role in promoting brands from other companies and lesser known models.

Yes, this is a dir-300 with C1 firmware.

It has advantages in terms of good wireless signal transmission, many different security and encryption technologies, wireless segmentation (up to 4 SSIDs) and device management.

But in my opinion, its disadvantage played a role in the initial distribution in Russia - unstable support for simultaneous transmission in the global and internal network of the provider. I'm talking about the widespread support of the Internet service provider DC. And it is not only convenient, but also free) This means that it is in demand.

So we come to the heart of the problem. There are two types of WAN connections on routers - IPOE and PPPoE. The first is responsible for the internal network, the second for the Internet. In this hardware version of the router, the initially local address is obtained automatically from the DHCP server.

With further PPPoE configuration, the internal IP flies and this is where it all ends ... Rebooting, resetting and reconfiguring the router does not help.

There are two ways out either to try to correct the misunderstanding, or to change the model ... The path of the programmer is thorny and long, so I decided to try to fix the bug.

Method 1. Change firmware

On the manufacturer's server, firmware for the router is periodically uploaded. http: // ftp. dlink.ru / pub / Router / DIR-300A_C1 / Firmware /

But the firmware that the manufacturer offers on the FTP soviet did not fix bugs with support for two networks.

Then they laid out the program for reflashing, new bootloaders. There are a lot of manuals and fake videos on flashing with the help of software on the internet, so I will not focus on this.

Move on to what helped me out in this situation ...

Method 2. Emergency mode and tambourine

Why I called the second method that way, you will understand if you finish reading the article)

So we reset the router to default settings and disconnect it from the power supply.

1) We connect the port of the network card and the trunk port of the router with an 8-wire twisted pair cable

2) Configure on the network card: IP-192.168.0.2

NM - 255.255.255.0

GW - 192.168.0.1

It will boot into emergency boot mode

4) After you go to the web interface, you only see a white screen. a field for entering the firmware address and a download button.

Indicate where the firmware is located and flash it on the very first firmware for the router.

5) After the router is flashed, once again reset the settings to default and start the configuration from the PPPoE connection (delete the IPOE).

Good luck and I hope my manual helped at least someone ...

D-Link DIR-300 is a router (router) with a Wi-Fi module and four Ethernet ports. Quite a good thing, but there is one drawback: when sold, it contains an old firmware, I no longer remember what year of release. And until you update it, this router is periodically pretty buggy.

The new firmware and the Russification file are taken here: ftp.dlink.ru. However, before flashing the latest firmware, you need to download the firmware that upgrades the router to a level compatible with it, namely, download the firmware /upgrade_first/DIR300A1_FW105B07.bin.

This is done as follows:

Go to the MAINTENANCE tab, then select Save and Restore from the menu on the left. In the Save and Restore Settings form, select the Save item and save the router settings to any reasonable place on the hard disk.
Download the firmware from the / upgrade_first directory using the link above.
Go to the MAINTENANCE tab, then select the Firmware Update item in the left menu. At the bottom of the page is the "FIRMWARE UPGRADE" form. Click the "Browse" button and point to the DIR300A1_FW105B07.bin file you just downloaded.
Press the "Upload" button and wait for the end of the update process, in no case shutting down or rebooting router. Please note that the router maybe after that, reset the settings to factory settings and change the ip-address to 192.168.0.1.
After rebooting the router, we repeat the two previous steps for the firmware file we have taken from the ftp.dlink.ru/pub/Router/DIR-300/Firmware/ directory. There will be 2 files with the extension .bin, we are interested in the one without "langpack" in the name.
After performing a second update (after which also available factory reset), the LANGUAGE PACK UPGRADE form appears on the MAINTENANCE / Firmware Update page. With its help (similar to using the FIRMWARE UPGRADE form) can download the Russification file, the same second file with "langpack" in the name. The process is completely similar to updating the firmware.
If during the update there was a reset to the factory settings, on the MAINTENANCE / Save and Restore page in the Save and Restore Settings form, click the "Browse" button in the Load Settings From Local Hard Drive line and indicate the settings file that was saved in the the beginning. After that, press the "Upload" button to upload the settings to the router and wait for the completion of this process.

Having completed all the specified operations, we are highly likely to save the router (in my experience) from freezes, sudden reset of settings, inability to see the external network and sometimes the inability to boot from the connected external network. Well, from other bugs, I hope, too :)

Two years have passed since the instruction was written. During this time, D-Link has released several versions of this router. The software for them, in particular the firmware, is not in the above directory, but in others:

DIR-300 is the same router about which this entry was originally written. In addition, judging by the name of the files, this firmware is suitable for DIR-300A1 routers. However, it is possible that the first version was simply renamed from DIR-300 to DIR-300A1. There are instructions DIR-300 + A1_Manual + v1.0.pdf.pdf (twice.pdf - if it's a typo, it's not mine - that's the name of the file on the server), DIR-300_QIG_RUS_02.pdf, Manual_DIR-300_A1_rev_1_0_RUS.pdf.
DIR-300_C1 - there should be a firmware update here, but on at the moment (05.09.2012) she is not there. Only instruction DIR-300_C1_QIG_v6.00 (RU) .pdf is available.
DIR-300_NRU - I draw your attention to the fact that presently exists TWO INCOMPATIBLE version of this router, namely firmware of the B1-B2-B3 series and firmware of the B5-B6 series. You can distinguish them by reading the sticker on the bottom of the router (see the file !!! reamde_first !!!. Doc). The firmware is in the corresponding directories: / B1_B2_B3 / and / B5_B6 /. If you flash the wrong firmware, then the router will most likely have to be carried to the service center.
- /B1_B2_B3/DIR-300NRU_QIG_v.1.2.25_RU.pdf

A situation in which it is necessary to restore the firmware on different DIR300 routers. When the utility prompts you to flash the DIR300 C1 with a new firmware, agree and wait for the process to finish. Installation of DDWRT firmware on DL DIR300 R B1 is performed via standard. The D 300 C1 or DSH routers are in decline. DIR 300 C1 FV version 20. A small addition for the 300 C1 still has a new firmware version 1. The DL DIR300 C1 router with firmware has a problematic way of flashing. Forum DL DIR300 and alternative firmware. DL offers a solution to this problem

DL DIR300 is a really excellent, reliable router. Due to the fact that a batch of DIR300AC1 devices with the old one appeared on the market. Firmware for DIR300 PN RIR300C1B. B3 go to the MAINTENANCE section. This firmware for the WF router DL DIR300 is based on the L operating system and is suitable for a large number of routers. Good afternoon, there is a D DIR300 C1 router. Updating the 300 firmware proved to be quite time consuming due to the many steps in the process itself. C1E which option should you choose? Instructions on how to flash the D DIR300 C1 router, what to do if the latest firmware is not installed and how to solve the most commonplace. If there was another router, then I would not have been able to flash it with the firmware on the DIR 300 C1

The router stops responding, freezes, turns into a brick. There is an old DIR300 router with hardware revision C1, are there ready-made assemblies for it and is it possible. In order to complete the flashing of the DIR 300 C1 without errors, you need to carefully study the instructions below. As a result of the merger of three companies on the market of Router DL DIR 300NRU B1B3, B5, B6, C1. Nizhny Tagil, a new company, KonveksTagil, has appeared, the main activity of which is to provide organizations and private users with access to a data transmission network built using modern digital technologies and fiber-optic communication lines. DIR300 had firmware from B. DOWNLOAD DOWNLOAD T! D300 firmware Advanced settings. The DIR300AC1 is a wireless router with a built-in 4-port switch allowing you to quickly and easily

But the firmware that the manufacturer offers on the FTP soviet did not fix bugs with support for two networks. Software, I immediately chose 21. Nowadays there are a lot of different devices, in the list of which the lengths are somewhere between the basement Chinese brands and bu 3coms. DIR300 A is available. Can you please tell me if it is possible to flash the DL DIR300AC1 or DL DIR300NRUB7 model? Solving the problem with changing the firmware DIR300 C1. I flashed the DIR300 with DDWRT firmware. On the original firmware, the router is nothing, however, it becomes a real miracle after. C1 decided to use two such devices with each other as they communicate via the wafer, in short, the speed is 10 megabytes per second. DIR300 C1 firmware for Beeline most often ends in failure

18 who are interested in how to write I will answer this is not the latest firmware! For an alternative firmware to enable dir300 as a bridge to it 1 proprietary version is a specialist for. Download the D 300 C1 firmware. DIR300 C1 firmware. firmware DIR300 C1. When working with a DIR300 router. How to restore the firmware of a DL DIR300 NRU, C1, D1 router. The firmware of the WF router DL DIR300NRU R. 00 is godlessly buggy. DLINK DIR300AC1 wireless router specifications, description, photos, reviews

With firmware out of the box, in some cases it can. If you were not automatically redirected, then click on this link.