Russian computers for large corporations. WebBench test results

will suit Lie video Card NVIDIA GeForce 8800 GS to Kraftway GEG motherboard? And got the best answer

Answer from Mad Doctor [Guru]
have a server?
if so that's info
and I don't know about Vidyuhi never faced, but I found a description of some Kraftway Geg Express 400 EM11
Intel SR4850HW4 platform (Harwich), Intel E8500 chipset, 667MHz FSB,
up to 4 CPU Intel Xeon MP (1MB L2 Cache, up to 8MB L3 Cache),
up to 64GB DDR2-400 (PC3200) ECC Registered SDRAM, up to 4 memory boards (16 DIMM slots), each card has 2 memory bank (4 DIMM slot),
1 X8 PCI-Express slot, 3 X4 PCI-Express slot, 1 slot 64bit / 133MHz PCI-X, 2 slots 64bit / 100MHz PCI-X,
Integrated:
Video controller: 2D / 3D Accelerator ATI Radeon 7000, 16MB SDRAM,
Network adapters: 2-channel Bradcom NetXtreme Gigabit Ethernet Server Controller (BRCM5704C), 10/100/1000 Mbit / S,
SATA controller: 1 port, used to connect CDD or DVD,
SCSI controller: integrated 2-channel (2 interior Canal) Ultra320 SCSI controller (LSI 53C1030), the ability to activate (RAID Activation Key) an integrated SCSI RAID controller.
Intel Management Modules (Intel Management Modules).
Intel SR4850 housing (Granby), black color, weight ~ 31kg.
Execution in the 19 "Rackmount hull 4U height.
Dimensions in Rackmount (4U) version: height - 173 mm, width - 447 mm, depth - 706 mm.
2 1470W power supply with hot replacement (Redundancy 1 + 1, Hot-SWAP),
5 compartments 3.5 "x1" for HDD C hot substitution with access from the front panel,
FDD is not installed,
1 external 5.25 "compartment,
2 paired cooling fan system components With a hot replacement (Redundancy 2 + 2, Hot Swap).
19 "Rackmount Case is completed with telescopic guides to extend the server from 19" racks.
CPU
4 * CPU Intel Xeon MP 3160 MHz Cache L2-1MB, FSB 667 MHZ
RAM
RAM 4096 MB DDR2-400 ECC REG (4 * 1 GB)
In the basic configuration of the server installed one operational memory extension board.
Controllers for connecting hard drives
Activation of integrated 2 channel SCSI RAID Cache Controller 512MB DDR2-400 with Battery
Installing hard drives

HDD SCSI HOT-SWAP 72 GB 10000 RPM, 80 PIN
HDD SCSI HOT-SWAP 72 GB 10000 RPM, 80 PIN
HDD SCSI HOT-SWAP 72 GB 10000 RPM, 80 PIN
HDD SCSI HOT-SWAP 72 GB 10000 RPM, 80 PIN
Optical drive drive
DVD ± RW (OEM) Slim
Server Control and Management Functions
INTEL MANAGEMENT MODULE PROFESSIONAL EDITION
Standard control panel for Intel 4U 6U enclosures
Intel Server Manager server management comes with each server.
Periphery
USB keyboard
USB mouse
Warranty service
Express 400 Warranty 1-3-Three OS 4-5th year STD

Bed happened, one of the available servers periodically began to fall out in " blue screen Death ", and always with completely different error codes. Most often there were errors 050, 02E ..., but with such a variety of these errors identify the reason for the failure, it was not possible. After numerous searches, they decided that it was possible a problem in the driver curves, or the Windows itself 2003 Server. Since all data from the server, we saved in advance, reinstalling Windows 2003 For us was not critical that we started to do. But, as it turned out, even when installing the OS, at different stages, the blue screen popped out and the installation was completed on it. Further, our surveys were sent to the side of "iron", the first thing we tried to change the SCSI disks, the benefit of them in the server 5 united in the RAID5 array. To do this, we created new arrays from different three disks, trying to exclude possible faulty, but these actions did not lead to a positive result. For the sake of interest tried to remove one of the two processors with motherboardwhich was in the second slot, the server was working on one processor at the same time, but also fell in an error, the second processor did not shoot, because Access to it was not very convenient. The next check object was the Intel SRCU42X two-channel SCSI controller, it is installed on a 128 megabyte memory plan, since we did not find the appropriate memory, we decided to change the entire controller.

On one of the available servers, the controller was removed, the truth is not the same as in a defective server, and SRCU42L, which does not have a removable memory bar and only one channel.

Replacing the controller at first we were delivered, because OS was installed and we decided that the problem was found, but after a while the server again issued an error.

On the motherboard of this server, there is also a built-in SCSI controller, but it was not involved, for the sake of the experiment, we removed the PCI-SCSI controller and formed an array on it, but it did not help. Still tried to pick up drivers for all three controllers, but that we just did not fit positive result So did not get. Further, the question was about replacing the motherboard, or the basket SCSI disks And already started looking for where they can be purchased.

Finally, we still decided to clarify and remove the processor from the first slot of the motherboard, and in his place to put out of the second slot and what was our amazement when the server after that earned in normal mode.

Here is a fault culprit in the photo - Intel Xeon SL73P processor (3066dp / 1m / 533/1525):

That's how our long-term findings ended and the server is now running on one processor, since it performs one simple task, for which the server's performance with one processor is quite enough.

Xilence proudly presented a new series of power supplies called Performance A. This is the first release of the manufacturer after a merger with Listan. The new items have replenished the segment of the elementary level products, but offer users high performance and a complete protection package from abnormal operation modes: UVP (protection against low voltage), OCP (current overload protection), SCP (short-circuit protection), OLP (Protection against overload), OVP (voltage overload protection) and OTP (overheating protection).

The line of Xilence Performance A is presented ...

Discussions about the release last week a new line intel processors Atom S1200 has not subsided yet, and Intel has already presented a series of three ATOM processor models that belong to the Briarwood family. Previously it was assumed that the release would be held in the first quarter of 2013, but the manufacturer was slightly forced the event. The new series primarily aims to use in the segment server Systems and various systems storage. One of the features of the Briarwood family is energy efficiency and a reasonable price.

The Briarwood series includes three ...

A series of professional displays of the ASUS organization has completed the next new device - ASUS Proart PA27AC. It is based on a 27-inch IPS panel with a resolution of 2560 x 1440. The novelty is described by high calibration accuracy (E<2) и 100%-ым покрытием палитры sRGB. Вместе с тем наибольшая яркость объявлена на уровне 400 кд/м2, углы обзора равны по традиции 178 градусов, а скорость матрицы составляет 5 мс.

To save the workspace, a new mechanism includes several 2-watt stereo speakers in its design. In the set of external interfaces ...

Oleg Denisov, Sergey Nazarov

Summer testing of a PC conducted by the "Byte / Russia test laboratory" was not quite ordinary: according to the rules given by us, computers were taken on tests only from manufacturers actively participating in large state and / or corporate tenders and publishing PCs in mass quantities. Therefore, testing turned out to be small - only four cars (and in this regard, it was decided not to make the choice of winners and not to celebrate anyone with the "Choice of the BYTE / Russia edition"), but it was representative - only leading Russian manufacturers of computer equipment participated in it.

According to the test rules, the participants could provide for PC tests with any processor officially announced at the time of testing, with a volume memory of 256 MB, a video transmitted 32-bit color with a resolution of 1024x768 and an image regeneration frequency of 75 Hz, a network ethernet interface, a sound subsystem , keyboard and mouse. Manufacturers could complement the machines by other components on their own selection. Plus, the wholesale price of the kit from the system block presented for testing, keyboard and mouse, OS and an accompanying software, no more than $ 700 at the time of testing during delivery by batches of 100 kits is limited.

We also asked to provide PC testing with the LCD monitor. But, given that the same PC can be equipped with the most different monitors - depending on the needs and budget of the buyer, we do not consider them in the review and give data about them only as additional information.

To more deployed to describe the PCs discussed here, testing participants were invited to provide the editorial board information materials describing: the model range in which the test PC is included; Concept design and application of office PCs for large corporations; Concept of building large office computing systems; technology testing and selecting components and testing PCs at the stage of development of serial models of computers; Testing technology of serial PCs in the production process; principles of construction and methods of service of service; as well as a historical certificate of the company. These materials are given in the article in the sings. All data on the production volumes of each company occupied by it in the ratings, etc., are given from representatives of the relevant company and we have not been checked.

Testing technique To determine the overall performance of the system, we used the ZD Business Winstone 2002 1.0.1 package, designed to measure PC speed when working with popular office applications. PC performance when working with 3D graphics was measured using tests from the Madonion 3DMark2001 SE Build 330 package. We also used the performance tests of the processor and memory subsystems from the Sisoft Sandra Standard 2003.3.9.44 package and WCPUID 3.1A and ENTECH PowerStrip 3.40, with which the working clock frequencies of central and graphics processors, RAM and video memory were measured. All tests were carried out in video mode with a color depth of 32 bits, a resolution of 1024x768 and an image regeneration frequency of 75 Hz running Microsoft Windows XP Professional OS with Service Pack 1. Detailed characteristics of tested systems and test results are given in.

Aquarius ELT DF240.

The choice of high-quality hull for PC is at the same time a reliable, safe, roomy, convenient and originally decorated - difficult task, but the developers of Aquarius ELT DF240 coped with it. The case of this PC provides good opportunities for expanding the system - three compartments for an external 5.25-inch drives, one - for floppy and three - for hard drives (and two of them can be placed in a removable basket, which is convenient). To enhance the strength of the housing and stiffness of the attachment of the drives, an additional steel plate is used - it is placed vertically in the lower right corner and "binds" a rack with compartments for drives and lower and front panels of the case. The side walls of the case are fixed with comfortable locks embedded in their upper part, and removed without tools. The motherboard is attached on a separate metal chassis. On the front and rear panels are provided by one jack for additional fans. Plus, it is an elegant and memorable appearance of the housing. True, there are no connectors for sound and USB ports on its front panel, which can be considered a disadvantage, - the output of two sound and two USB ports to the front panel of the PC today has become actually standard.

ELT DF240 is built on the basis of high-quality and reliable components from manufacturers with excellent reputation - this is an Intel Pentium 4 2.4 GHz processor with 533-MHz bus, the ASUS P4PE system board on Intel 845PE NMS with built-in 10/100-Mbit / with network Ethernet Broadcom BCM4401 controller, ASUS V8170 DDR / SE / T video collection on a graphics processor NVIDIA GeForce.4 MX 440-SE with 64-MB of video memory, 40-GB SEAGATE BARRACUDA 7200.7 ST340014A Hard Drive and 52x CD-ROM ASUS CD-S520 Drive. We also note good system expansion capabilities - three sockets for memory modules and six free PCI sockets (though two PCI compart are busy extension brackets) - and connecting peripheral devices - optical and coaxial S / PDIF outputs, port Game / MIDI, two Serial ports and two TV outputs - S-VIDEO and RCA. By the way, the design process, development and production of this PC is certified for compliance with the ISO 9001: 2001 quality standard. In addition, PC is certified for compatibility with Microsoft Windows 2000 and Windows XP.

During the tests, the ELT DF240 showed good results in the Integral office test of Business Winstone and in tests on the operation of RAM, more modest - in the graphic 3D test 3DMark2001 and in processor tests, which, however, configures the configuration and computational capabilities of this machine.

In addition to the system unit, the ELT DF240 is completed with the keyboard and the mouse of standard design, printed PC user manuals and motherboards, Microsoft Windows XP Professional OS and Kaspersky Anti-Virus and is provided with a long-lasting three-year warranty (a detailed description of the service network "Aquarius" see in the insertion) . ELT DF240 and other Aquarius technique can be purchased from more than 750 partners of the company purchasing it through three distributors - Landata, OCS, Verysell.

"Aquarius" The production company "Aquarius" (http://www.aq.ru), founded in 1989, is part of the Aquarius group, which, in turn, has become part of the Holding "National Computer Corporation" (NKK ). The main activities of Aquarius are the development and manufacture of PCs and servers with the Aquarius trademark, the development and support of the regional affiliate network, the development of regional service infrastructure. "Aquarius" became the first in Russia with a non-state organization, which has established its own factory production of PC. Today, the company has a PC plant in the city of Shuya Ivanovo region. With a capacity of 120 thousand PCs per year and a production workshop in Moscow with a capacity of 36 thousand PCs per year. According to analytical agencies IDC and ITRESEARCH, Aquarius is included in the top three PC sales leaders and servers on the Russian market. The Aquarius ELite PC family was developed by Aquarius, especially for the most demanding customers. These models are distinguished by high reliability, quality, excellent technical characteristics, rich in functionality, wide modernization capabilities, which provides them with a long service life and low cumulative cost of ownership. They can be successfully used to solve a variety of tasks - work with volumetric databases, 3D graphics, video data, CAD, etc. PCs of the ELITE family are equipped with Intel Pentium 4 processors, Asustek and Intel system boards, certified to Microsoft Windows 2000 / XP and can be supplied with pre-installed licensed versions of these OS, as well as with the Microsoft Office 2000 / XP office. The company "Aquarius" produces a wide range of PCs and servers, which makes it possible to build modern office computing systems of various purposes. In addition to powerful PC Aquarius Elite, jobs can be equipped with low-cost Aquarius Standard series models and workstations for corporate users Aquarius Professional. Collective services can be organized on the basis of the Servers of Aquaserver E, AquaserVer P and AquaserVer T. AQUASERVER E servers are focused on applying in small companies or workgroups with respect to 20 people. These machines are little more expensive than powerful PCs, but differ greater reliability and better expansion opportunities. AQUASERVER P servers are built on the Intel platform base and are designed to work in large networks and computing centers. Careful selection of components, pre-testing of components and mandatory 72-hour tests in the thermocamera ensure that AquaserVer P will be fully functioned even in the most difficult conditions. The compact AquaserVer T servers are installed in a 19-inch rack and are designed to organize telecommunication nodes and computing centers with a high density of computing power and communication ports, with increased reliability, flexible reservation and load distribution. All Aquarius servers are certified for compatibility with operating systems from the Microsoft Windows 2000/2003 Server family. In the process of developing serial models, the Test Laboratory "Aquarius" checks the performance of a PC in configurations collected from the components of various manufacturers close in terms of the characteristics of the components of various manufacturers, and issues recommendations on the most reliable combinations of components (it is indicated which components need to be used together, which - you can and which is unambiguous It is impossible). In the future, "Aquarius" forms a model range of computers, focusing exclusively on the first category, but at the request of customers can use the configuration of the second category. The mass production of PC Aquarius begins with input testing of components, and the company is very strictly related to the quality of the entire purchased batch. If the percentage of marriage exceeds the allowable, then the "Aquarius" breaks up with this supplier, regardless of its weight in the IT business. PCs that have come down from the conveyor passing the mandatory 24-hour testing in the thermocamera at 35-40 ° C. Servers are subjected to even more severe tests - they are sent to the customer only after the trouble-free 72-hour work in the thermocamera. Based on statistics of service centers, monitoring and analysis of the breakdown is constantly being monitored. Marketing and commercial service regularly analyze claims from customers and dealers. As a result, the TQC-system of complete control (Total Quality Control) combines all the divisions of the company. In the summer of 2002, Aquarius introduced a new model for building a service network. This step was caused by the active regional expansion of distributors of the Aquarius technology, which required a full warranty service and the presence of an extensive network of service centers in all constituent entities of the Russian Federation. Today, this network has 173 service centers in all regions of Russia. The own service program was developed, which enables any regional company responsible for qualifying requirements, to become a service center "Aquarius". Since the manufacturing company trusts some unfamiliar firms of their reputation, the quality of service requirements (they include both the factual quality of repair and compliance with the three-day period) were sufficient. In order to interest potential partners, it was necessary to provide them with the opportunity to make money well on the repair of equipment. After analyzing the statistics of failures, Aquarius took an extraordinary step - for each repair case, 25 dollars are paid to the partners. When replacing components (excluding the cost of the last) and $ 5, if components are not replaced. Almost all authorized service centers, with the exception of Moscow, are not structural divisions of Aquarius. The program also lists in detail cases in which the company breaks relations with the service center, depriving its authorization, is non-compliance with repair time (no more than three days), poor-quality repair and use of components that are not included in the list of recommended Aquarius. In August 2003, Aquarius plans to start implementing the authorization program for servers service centers. At the moment, the technique supplied by the company "Aquarius" is serviced by several large corporate customers - the Social Insurance Foundation, the Ministry of Finance of the Russian Federation, the supply of children in the Russian Federation, etc. Service works are carried out by Aquarius partners for individual contracts. The overall extended service support system is also being developed, which will be available to any buyer of the Aquarius technology and must be launched by the end of 2003. This system will include such types of services as repairs at the place of operation, the accelerated terms of repair of technology, guaranteed service provision, For example, 24 hours a day 365 days a year, etc. The cost of the extended service packages will, of course, depend on their content. Corporate customers who have entered into an agreement on expanded service are provided by technical advice on the telephone from the Aquarius service partners. Other users of Aquarius technology can consult by telephone or email at the Moscow Service Center. In addition, in almost all cities where Aquarius products are sold and installed, authorized service centers in which users can seek consultations during working hours. When the sale of extended service packages begin, users can, if necessary, will be able to get round-the-clock support.

DEPO RACE 465.

Among all tested PCs, the DEPO Race 465 was highlighted in the most powerful processor and quick system memory - Intel Pentium 4 2.8 GHz with 800-MHz system bus and Hyper-Threading tools in a "bundle" with a two-channel DDR400 SDRAM. It is not surprising that this model and ranked first in tests for the speed of the processor and RAM.

Characteristics of the processor and memory in combination with a quick 40-GB of the hard drive Western Digital Caviar Special Edition WD400JB with an 8-MB of cache buffer provided Depo Race 465 noticeable advantage in the Integral Business Winstone integral test, where he has greatly ahead of all competitors. However, the leadership of this model was not indisputable - the Race 465 is equipped with 512-MB of RAM, which did not comply with the requirements for the pc tested (256 MB of RAM). In the graphic 3D test 3DMark2001, the effectiveness of this PC was modest - the third place.

Race 465 is assembled in a housing with a very well thought-out design. First of all, it is spacious - you can install four external 5.25-inch drives, external floppy and one external and internal (or two internal) 3.5-inch drive. Even at the same time inside the PC is very spacious, and you can easily reach all internal components. Under the protective cover on the front panel of the PC "are hidden" two USB- and two sound connector. The left side cover of the case is installed and removed without tools (by the way, it can be blocked using the lock - for this, a special eyelet is provided on the rear panel), as well as the entire internal 5.25-inch device and floppy drive - they are fixed with plastic latches. The motherboard is attached on a separate metal chassis. The strength of the case is amplified by a vertical rigidity, which also contains plastic extension boards. On the front and rear panels are placed on one planting socket for additional fans.

The advantages of RACE 465 should also include the use of high-quality memory modules of Kingston production, "rided" metal cooling radiators, a fast gigabit Ethernet-card Intel Pro / 1000 MT Desktop Adapter, the presence of DVI-i- and TV output, full "wiring" USB Subsystems - eight external USB ports (as a rule, PC manufacturers are limited to six or four) and the presence of two consecutive ports. The audio subsystem of this PC is quite common - it is built on the basis of the six-channel AC "97-audio code of Realtek ALC655 (we note here the absence of the Game / MIDI port).

The Race 465 package, in addition to the system unit, turns on the DEPO KWD-701 standard keyboard, the Depo C1310 optical mouse, Microsoft Windows XP Professional OS, PC user manual and quick installation guide. We emphasize that the RACE 465 is compatible with Microsoft Windows 2000 / XP, and its manufacturing process is certified for compliance with ISO 9001 quality standard.

The price of RACE 465 includes three-year warranty service in Deline service centers (more than 130 centers in Russia) with a maximum five-day repair period, but if desired, the user can choose another warranty plan: two years of service in the service center - minus $ 12 from PC costs, two years with service at the site of operation during the first year - plus $ 44, three years with service at the site of operation during the first year - plus $ 58, two years of service at the place of operation - plus $ 69, three years at the place of operation - plus 127 dollars.

"Deline" The company "DYLAYNE" (http://www.dealine.ru), a large Russian distributor and a manufacturer of computer equipment, produces a PC under the trademark Depo since June 2002. This was preceded by a serious preparatory work, including a market research, studying the world experience of PC production , Working on the production technology and the process of interaction with suppliers and customers, organization of support service and service network. In addition, the proprietary experience of the production of "non-shaught" PC was played a major role - from 2000. Dylaine supplied White Boxes (platforms from the tested components for the assembly of computers). Currently, "Deline" produces a full range of PCs, which includes family computers Depo Neos, Myst, Race, Depo Race Workstations and DEPO STORM servers with a total sales of products under the trademark DEPO about 12 thousand pieces per month. DEPO computers are manufactured in industrial conditions on the Own production facilities of the Dilax company, located on the territory of a single office and warehouse complex and designed to issue up to 1000 computers and 20 servers per day *. DEPO computers are certified for compliance with the quality management system to two standards: International TUV CERT ISO 9001 and the Russian standard GOST R ISO 9001-2001. In the production workshop "Deline" installed modern lines; The qualifications of specialists working for them necessary for the production of each model of DEPO techniques are confirmed by the relevant certificates. In the production cycle, parallelization of operations is implemented, which provides for the possibility of simultaneous operation of several sites above one order. Thanks to the concept of "just on time" (Just-In-Time) at the right time, all processes are synchronized in the desired area, which gives a significant increase in labor productivity. The technological process begins with the preparatory stage, on which the processing and preparation of components and their 100% input control occurs. In the manufacture of DEPO equipment, only high-quality modern components of well-known trademarks, well-proven in the market, coming from the largest warehouse of computer components from Russia, are applied. Prepared components fall on the line of assembly and output control, on which the assembly assembly and testing of finished products is performed. DEPO products have all the necessary certificates (hygienic and growth) in accordance with current legislation. All DEPO PCs are certified to Microsoft Windows 2000 / XP compatibility. DEPO servers are certified for compatibility with Microsoft Windows 2000 Server and Windows 2000 Advanced Server. Taking into account the increased requirements for the quality of the servers, and in order to ensure their high reliability, DEPO servers pass a long testing cycle - including under load. The structure of the divisions of the company "Deline" created a special department involved in technical research and development. The main tasks of the research and development department are the definition of promising areas for the development of model rows of DEPO techniques, taking into account their compliance with advanced and efficient technologies; development and creation of product samples based on studies on customer preferences and in accordance with the trends in the industry; comprehensive testing of samples for compatibility with operating systems and obtaining the necessary certificates; attracting independent certification laboratories for additional comprehensive product testing; Creating a reference product for subsequent launch into serial production; development and continuous improvement of the methodology for testing finished products; Creating compatibility sheets with options for each model. The company "Deline" does not work on a fixed price list with a list of typical models of technology, but allows each customer to find your own PC or server configuration. Through the Internet, the buyer can at any time design the necessary configuration of the computer using an online toolkit and select the desired software. Thus, the system made to order will accurately respond to the needs of the user. PCs of the Depo Race family are positioned by Deline as powerful corporate machines and are intended for users with increased system performance requirements - system administrators, software developers, managers of companies and enterprises and those who actively work with digital graphics, audio and video. The latest architectural solutions and technological achievements implemented in the Models of the Depo Race family and technological achievements are guaranteed a long-lasting PC life cycle and provide excellent opportunities for expanding the system. The Depo Race family is represented by two models - DEPO RACE 465 and DEPO RACE 475, constructed on the basis of system boards with NMS Intel 865pe and Intel 875p. Distinctive features of these machines are equipped with Intel Pentium 4 processors with 800-MHz system bus and built-in Hyper-Threading tools, two-channel DDR400 SDRAM memory, the AGP 8x graphical interface and Serial ATA / 150 interface for connecting hard drives.

GEG PRESTIGE 41240A.

PC GEG PRESTIGE 41240A has proven itself very well in the testing tests. Thanks to the fast video card Gigabyte GV-R9264D on the ATI Radeon 9200 graphics processor with a 64-MB of DDR-video memory and 8x AGP interface Prestige 41240A, the 3DMark2001 graphics 3D test, while the powerful Intel Pentium 4 2.4 GHz processor from 800 -MCC system bus and built-in Hyper-Threading tools and high-speed dual-channel DDR333 SDRAM memory provided this model second place in processor tests and in tests on the operation speed of RAM. Prestige 41240A showed himself well in the integral office test of Business Winstone, but he managed to take only the third place.

The use of high-quality modern components from leading manufacturers is the undoubted advantage of Prestige 41240A. In addition to the already mentioned Intel processors and video payments from Gigabyte, the PC is equipped with a Gigabyte GA-8IPE1000 system board based on the latest NMS Intel 865pe with built-in standard six-channel AC "97-audioSystem, 40-GB hard drive MAXTOR DIAMONDMAX PLUS 8 6E040L0 and 50X CD-ROM drive ASUS CD-S500. We also note that the Prestige 41240A production process is certified for compliance with the ISO 9001 quality standard.

Prestige 41240A provides good capacity building opportunities - four memory module sockets (the total capacity of RAM is up to 4 GB), five PCI sockets (four are not busy), three compartments for an external 5.25-inch drives, one - for Floppy drive, two - for hard drives. However, with the expansion of the peripheral part, the situation is somewhat worse - the PC is equipped with a digital DVI-i-output for connecting the LCD monitor, combined S-VIDEO-RCA TV output for connecting a TV receiver, 10/100-Mbps with a network Ethernet interface (implemented by the Repotec RP-1624W PCI adapter tools), two consecutive ports, but does not have Game / MIDI and S / PDIF ports.

PC is assembled in a competently designed body. Free access to all internal components of the system, with the exception of the power supply and compartments for a 5.25-inch drives - they are "overlapped" by an additional rigidity rebier that enhances the body strength. The power supply is equipped with a "through" power connector - to it, as a rule, the monitor is connected, which is very convenient. An additional fan is located on the front panel, securely protected by a metal casing, on the rear - socket for the second additional fan. Compartments for the 5.25-inch drives are closed outside the dust-proof door with a cut-out to access the upper compartment - it has been installed a CD-ROM drive. Unfortunately, there are no external connectors for USB ports and audio ports on the front panel of the case, which today can be considered a disadvantage (however, insignificant).

The Prestige 41240A package includes a standard design keyboard and a mouse, printed PC user guide and motherboard, Microsoft Windows XP Professional OS and Norton AntiVirus 2003 Anti-Virus Package. The PC is provided by a three-year warranty with free maintenance at the place of operation for one year, but for Corporate customers are possible to conclude a separate contract for the maintenance of equipment at the site of operation during the entire warranty period and to replace the components failed within 24 hours.

KraftWay Computers. Kraftway Computers (http://www.kraftway.ru) has established the release of PCs and servers under the GEG's own brand in 1993. And next year, the production facilities in the technological premises of the State Scientific and Production Enterprise "Kvant" and signed OEM - Agreement with Microsoft to install licensed software on GEG PC. In 1995, GEG PCs were tested for Microsoft compatibility, and serial production of two-processor servers was launched, and the company entered the list of industrial enterprises responsible for the supply of equipment for the Ministry of Defense of Russia. In 1996, KraftWay computers were certified for compliance with the requirements of the ISO 9001, the release of servers in the industrial execution of GEG Industrial and four-processor servers was launched. The company entered the top ten largest Russian PC manufacturers. In 1999, Kraftway released the first eight-processor server and became, according to Intel, the leader in the Russian server market, a year later received the status of Intel Premier Provider and entered the top three of the largest Russian PC manufacturers. In 2002, the company began issuing servers based on Intel ITANIUM 2 processors, took part in Intel forums for developers (IDF) in San Jose and Moscow and began the construction of its own production and logistics center in Obninsk of the Kaluga region, next year - launched new Production facilities allowing to produce up to 30 thousand PC per month *, and opened the Kraftway server solutions center on the Intel platform. * IDC / ITRESEARCH data on real production volumes for the first half of 2003, it is shown that the company's production potential is not fully involved. Today, KraftWay Computers produces a wide range of PCs, developed based on more than 10 years of sales of sales statistics, surveys of the dealer network and special depth marketing research and overlapping almost all consumer niches - from low-cost office PCs to powerful two-processor graphics stations on Intel Xeon processors . Kraftway PCs are based on the Gigabyte system boards and Intel and AMD processors and are equipped with OC Microsoft Windows XP or Linux. KraftWay servers are available on Intel platforms. GEG Prestige PCs were developed and positioned as high-performance workstations that can be used to solve a variety of tasks - as powerful domestic machines, graphic workstations and systems for scientific and engineering calculations. The characteristic features of these PCs are powerful processors in combination with large-volume RAM, a quick graphic subsystem, wide possibilities of upgrading and increasing system performance. The GEG PRESTIGE model range includes several PC series that differs in the component base. GEG PRESTIGE DV35XX series machines are equipped with an AMD DURON 1.2-1.3 GHz processor or AMD Athlon XP 1700-2800 +, the system board on the VIA KM266 chipset, the system memory DDR266 / DDR200 SDRAM, built-in video transmitted without local video memory (used instead of it up to 32 MB of system memory). GEG PRESTIGE DA36XX Series includes AMD DURON 1.2-1.3 GHz or AMD Athlon XP 1700-2800 +, AMD AMD 761, DDR266 / DDR200 SDRAM memory, AGP video card with 32-MB local video memory. GEG PRESTIGE 4I10XX is based on Intel Pentium 4 1.8-3.06 GHz and SIS655 NMS, have a two-channel DDR266 / 333/400 SDRAM, AGP video card with 32 MB of local video memory. GEG PRESTIGE 4I20XX series is an Intel Pentium 4 1.8-3.06 GHz, Intel E7205 NMS, DDR200 / 266 SDRAM dual-channel memory, AGP-video pay with 32 MB of local video memory. Models GEG Prestige AA10XX include up to two AMD ATHLON MP 2.0-2.6 GHz processors, AMD 760MXP NMS, DDR266 / DDR200 SDRAM memory, AGP video plane with 32 MB of local video memory. The GEG PRESTIGE XI31XX series contains up to two Intel Xeon DP processors 1.8-3.06 GHz, Intel E7505 NMS, DDR266 / DDR200 SDRAM memory, built-in video specifier (up to 8 MB of memory from RAM). The basic configurations of all PC PRESTIGE are "on board" an Ethernet interface, with the exception of the GEG PRESTIGE DA36XX series machines - these models are equipped with them additionally. All GEG PRESTIGE machines also "by default" are equipped with a built-in AC "97-audio mode. PC KraftWay Computers pass hard technological control at all stages of production. Control methods can be divided into three groups - visual, software and electromechanical. Visual control methods are used at the very beginning of the production process to detect an apparent constructive marriage of components - damage to the paintwork or conductive layer, violation of the geometry due to improper transportation, etc. - and during the acceptance of the assembled product - to check the correctness of the attachment of the nodes, laying the loops and T d. Software control methods are intended to verify the claimed functionality of the product, reducing the laboriousness and monotonicity of the work of personnel (for example, by automating the product configuration comparison operations with reference) and allow you to accurately document the control results (i.e. avoid errors associated with the human factor). For such control, special test programs are applied both their own development and leading test software developers and component manufacturers. These programs are combined into test groups intended to check a specific controller or a whole product block. Prior to the launch of the product for each configuration, the tests from the test groups creates a unique set of test effects, in which, among other things, the procedure for passing tests (sequence, simultaneity) and reference test results are set. The design of the test for testing occurs in semi-automatic mode, the logging of test results is automatic. This gives additional insurance from the "human" error, not allowing the product to transmit the product to the next section of production, if the test results are automatically saved in a single database diverge to reference. Electromechanical control methods are designed to ensure the electrical safety of the product and checking the reliability of attaching its nodes and blocks. To determine the technical prospects for the possible application of new components and architectures to expand the model range of servers and PC KRAFTWAY Computers, a beta laboratory has been created in the company, whose specialists create prototypes of products and using inter-platform measuring packets check the speed of standard operations and compatibility of these systems with Different peripheral equipment and enclosures. The KraftWay service network includes 115 service centers throughout the country.

Irbis Favorite C2425 / 80F

For the power of the processor (Intel Celeron 2.4 GHz with 400-MHz system bus and 128-KB Cache L2) and the speed of RAM (single-channel DDR266 SDRAM) IRBIS Favorite C2425 / 80F inferior to other testing participants; In addition, it was equipped with a rather slow video model (Innovision Tornado GeForce4 MX 440 SE on the NVIDIA GeForce4 MX 440-SE graphics processor with 64 MB of DDR-video memory). As a result, this PC has been lagging behind competitors in the testing tests. But in favor of this model, there is a low price ($ 640) and the impressive capacity of the disk subsystem based on the 80-GB of the MAXTOR DIAMONDMAX PLUS 9 6Y080L0 drive - according to the characteristics of IRBIS Favorite, it was leading. This PC also turned out to be the only, equipped combined optical CD-RW / DVD-ROM drive (TOSHIBA SD-R1312); In the remaining tested models, "simple" and, of course, less expensive CD-ROM drives were installed.

Plus, the high-quality motherboard from the manufacturer with an excellent reputation (ASUS P4PE on Intel 845PE NMS), good system expansion capabilities - three connections for memory modules with a capacity of RAM to 2 GB; six free PCI-nests (though, two compartments for PCI boards are busy expansion brackets); Four compartments for external 5.25-inch drives, one - for floppy drive, two - for hard drives - and connecting peripherals (TV-out, built-in 10/100-Mbps Ethernet controller Broadcom BCM4401, two consecutive ports and Built-in six-channel sound subsystem with optical and coaxial S / PDIF output and Game / MIDI port). We also note that the quality management system of the company "K-Systems" producing IRBIS Favorite, at all stages of production certified for compliance with the requirements of the ISO 9001: 2000 standard.

Irbis Favorite is collected in the Middle Tower housing with seven storage compartments, which is quite a lot for the system unit of such a size, but it provides free access to all internal components, and inside the PC is quite spacious. The constructive advantages of the case of this model should also include the presence of removable side panels, two sockets for additional fans - one by one on the back and front panels (and the latter is securely protected by plastic cover) and the front panel compartment for external audio and USB ports (though, In the test instance, Irbis Favorite they were not involved).

IRBIS Favorite is equipped with a keyboard and a standard design (additionally there are three buttons - Wake Up, Sleep, Power - and Hand Stand at the Keyboard), PC User Guides and System Boards, Microsoft Windows XP Professional OS and Acronis True Image program for backup data.

Irbis Favorite PC is provided by a two-year-old service guarantee in the head service center "K-Systems" in Moscow and more than 90 regional authorized service centers throughout Russia. The buyer has the right to independently carry out the upgrade of the PC, but in this case the warranty does not apply to independently installed components and on defects arising from such an upgrade. If there are analogues, the replacement of the outstanding components is made within 24 hours, equipment on the replacement for repairs is provided. Within the Moscow Ring Road on a separate contract, service is possible at the site - the cost of this service depends on the number of serviced equipment, but not more than 10% of the cost of equipment per year. During the warranty period, free service support is also provided - advice on the phone and email, updating drivers on the FTP server "K-Systems".

The wholesale sale of IRBIS PCs in Moscow and St. Petersburg is engaged in the Direct Sales Department "K-Systems", retail sales are going through the White Wind Trading Retail Networks, "M.Video", "Eldorado" and "Technosila". In other cities of Russia, Irbis PCs can be purchased from more than 30 regional partners.

"K-Systems" The company "K-Systems" (http://www.k-systems.ru) operates at the domestic IT market since 1994 and serially produces computer equipment under its own brand. The main activities of the company are the production of desktop PCs, servers, professional graphics stations, monitors, laptops, windows-terminals and means of displaying information; corporate deliveries; implementation of integrated projects; Customer service. According to IDC analysts, in 2002 and in the first quarter of 2003, the "K-Systems" entered the top five leading Russian PC manufacturers. The company "K-Systems" has its own production facilities. In 2002, a new assembly workshop began working in Moscow, which allows to collect and test more than 18 thousand computers every month *. "K-Systems" makes a bet on stripping production - this approach provides better product quality compared to automated assembly and allows you to quickly adjust the configuration of the final product. * IDC / ITRESEARCH data on real production volumes for the first half of 2003, it is shown that the company's production potential is not fully involved. The quality management system of the company is certified for compliance with the requirements of the international standard ISO 9001: 2000. The quality of the "K-Systems" products is also confirmed by the Intel Provider Provider category provider status, certificates of compliance with hygienic standards, the requirements of the State Standard of Russia, Gostekomissions under the President of the Russian Federation, Communication Certification Systems and InfoSert. The company has the licenses of the FSB of Russia, FAPSI and Gostekomissius under the President of the Russian Federation, including on work in the field of information protection and the provision of Gostain's Protection Services. When designing office PC, engineers "K-Systems" are guided by the following criteria: the reliability of the system as a whole; compatibility with the most common software; optimal functionality for the selected task class; simplicity of preparation for operation due to the pre-installation of software; Ergonomics of the system (design, dimensions, noise); equipment facilitating the use of PC; high-quality technical support and service; the best value ratio and all listed characteristics; The wishes of the customer, if they do not contradict the concept of the company's design. According to the "K-Systems" engineers, the Intel processors have an advantage compared to AMD processors, providing better thermal stability, built-in overheating protection tools, higher system bus frequency, an additional set of SSE2 commands for processing multimedia data. Therefore, when choosing a configuration of the machine, which represented the IRBIS Favorite model range during testing, two variants of the processor were considered - Pentium 4 and Celeron, but the cost limit was the decisive argument in favor of Celeron with a clock frequency of 2.4 GHz. According to sales statistics "K-Systems", corporate customers prefer embedded graphic controllers Intel Extreme Graphics and discrete video adapters on the NVIDIA GEFORCE4 MX 440-SE graphics processor. The use of Intel Celeron allowed to choose a more powerful video adapter based on NVIDIA GeForce4 MX 440-SE for the PC testing. NMS for Intel's motherboards use the greatest trust in corporate customers due to the strict requirements of Intel to the quality of products. The choice of a specific NMS model - Intel 845PE is due to the choice of processor and a discrete video adapter. This NMS also provides the possibility of further increasing PC power if the processor is replaced or the volume of RAM is increased. To date, memory selection is most obvious - PC2100 or PC2700 DDR SDRAM. In the IRBIS Favorite tested PC, the PC2100 DDR SDRAM memory is used, since when using Intel Celeron in combination with the selected NMS, the memory bus frequency cannot exceed 266 MHz. As a disk subsystem, a 80 GB drive with a Ultra ATA / 100 interface, a rotation speed of 7,200 rpm, without organizing a RAID array. The use of disk subsystems with Serial ATA / 150 and SCSI interfaces in a PC of this class is inappropriate - their cost is significantly higher (at least for Serial ATA). The creation of a RAID array is justified only in two cases - to achieve maximum performance (for example, when performing bulk engineering calculations) and creating a highly reliable storage system (which is typical for server applications). Most supplied Irbis Favorite office PCs are equipped with a 52x CD-ROM drive, but if necessary, you can order and the other. For example, a test instance of IRBIS Favorite was equipped with a combined DVD-ROM / CD-RW drive. The selected NMS and the motherboard provide work with a six-channel sound, although two-channel acoustics are quite sufficient when working in the office. The columns are not included in the standard PC package, since many users use headphones instead (for example, in large offices). The concept of "office PC" implies collective work and access to the Internet, therefore Irbis Favorite PCs are be equipped with 10/100-Mbps Ethernet interface. The PC can be additionally equipped with an internal modem, but in the basic configuration, this device does not turn on - sales in the corporate sector are oriented mainly to large offices with centralized Internet access. On all PC Irbis Favorite is installed licensed software. Pre-installation OS preferable for two reasons - fast deployment of PC and the correctness of the installation of the OS, drivers, service packets, etc. Irbis Favorite PC in the basic configuration is supplied with Microsoft Windows XP Professional OS (in the supply of equipment for large offices with a hierarchical domain structure) Or Windows XP Home Edition - for home or small offices. At the request of the customer, Microsoft Windows 98 SE, Windows 2000 Professional, ASP Linux 7.3 or 9.0 can be installed. To restore OS, the entire IRBIS PC is set to Acronis True Image OEM PC. This package allows you to quickly restore the source image of the OS and, in addition, to conduct your own data archive. To perform a typical set of tasks to the office infrastructure, as a rule, it turns on: a group of servers of various functionality (Internet access server, domain control, database, file server) and user jobs. To increase the security and confidentiality of information "K-Systems" offers Windows Terminals Termin. In addition, the company produces various models of full-format PC Irbis Favorite and small-sized IRBIS M PC for "average" employees and systems based on Intel Pentium 4 with built-in Hyper-Threading tools for users with increased machine performance.

In the computer laboratory "ComputerPress" conducted a testing of 12 two-processor servers of domestic manufacturers on Intel Xeon and AMD Opteron processors. During the test, the performance of servers was compared when used as file and Web servers. DESTEN NAVIGATOR 7280L, DESTEN NAVIGATOR RM 7320U1L, ETEGRO HYPERION RS380, KLONDIKE AS, KLONDIKE PRESIDENT 2000A, KRAFTWAY GEG EXPRESS 200 ED21, KRAFTWAY GEG EXPRESS ISP ES23, TEAM SERVER 2400A, NICS S4000ABK / PRO (SO240PGA), Nix S4000BK / Pro (SX32APRI), EXION-MAJOR EC27 and EXION-MAJOR LC27. Outside the competition, the Klondike Present 1500A server was tested.

Selection criteria

on the current tradition of the tradition in our test laboratory in December, two-processor servers of Russian manufacturers were tested in our test laboratory. Each manufacturer could provide for testing two own production servers that meet the following requirements:

• the use of any two-processor system board on any chipset with two production processors produced;
• using any type of RAM with ECC error correction in a volume of at least 2 GB;
• installing hard drives with any interface (IDE, SCSI) and any RAID controller. The operating system was installed on a separate hard disk. The remaining discs were combined into a RAID array with one logical disk for the entire volume of the array, the NTFS file system and the default cluster size. The RAID RAID level was to ensure the reliability of data storage (the RAID array of level 0 was not allowed);
• use of an integrated or any other video adapter;
• mandatory presence of a network adapter with support for the 1000Base-T interface;
• mandatory presence of a device for reading CDs of any type;
• mandatory installation of a 32-bit X86 Microsoft Windows Server 2003 Enterprise Edition SP1 operating system (English version);
• installation at the discretion of the manufacturer of device drivers and additional OS setup, without changing the processor, memory and tire frequencies.

Since the testing of the servers is a long-term process, then for the purpose of aligning the conditions, all manufacturers have announced the selected configuration of the server before testing the first server and then they could not change it.

As a result, seven servers on the Intel platform and five on the AMD platform took part in testing. At the same time there was a wide variety of components applied in server servers. For the first time, servers on dual-core processors participated in testing. It should also be noted that with the advent of the NVIDIA NForce Professional series chipsets, the monopoly position of AMD on the server of server chipsets for Opteron processors was finally violated.

The Klondike PreSiDent 1500A server was tested outside the competition, since under the conditions of testing the company could provide only two servers. This server is interesting in that in its designs use Intel Xeon processors with a working frequency of 3.8 GHz, which are currently the most productive single-core server processors from Intel.

Technical characteristics of testing participants are given in Table. one .

Testing technique

etodakka testing compared to previous similar tests has practically not changed: we compared the performance of the servers in the file and web server modes. A distinctive feature was only the application of Microsoft Windows XP Professional SP2 operating system on workstations and controller with all the updates that came out until September 2005, and on the server - Microsoft Windows Server 2003 Enterprise Edition SP1. Recall that in previous testing, we abandoned the use of the Service Pack 2 update package, since when it is installed, the workstation-server workstation pair in the NetBench test has significantly decreased. The renewal has come out since then, the performance has become even higher.

To test the test, a stand consisting of two segments of the local network was collected. The first segment - Fast Ethernet 100Base-TX - formed 48 workstations, and the second - Gigabit Ethernet 1000Base-T - Server-Switch Channels and Controller - Switch. To combine workstations, the controller and server, a 3COM SuperStack 3 switch 3 switch 4250t (3C1732), having 48 ports 100Base-TX and two ports 1000Base-T (for details on the switcher, see in the s).

NetBench 7.0.3 and WebBench 5.0 from Ziff-Davis are used for testing.

NetBench 7.0.3 package

NetBench 7.0.3 package This is used to determine the overall server performance when using them as file servers, but does not allow you to test individual server subsystems. For example, using this package it is impossible to calculate the relative difference between the capacity of the disk and the network subsystems.

During the test, each client creates a working directory and performs various file operations in the direction of both the "client-server" and the "server-client", and the execution time of each file operation and the network traffic created is recorded. Note that the RAID array of the server was used to create operating directors during testing.

In total, the test provides 18 different file operations: Open File, Read, Write, Lock, Unlock, Get File Attributes, Set File Attributes, Get Disk Free Space, Close, Get File Time, Set File Time, Find Open, Find Next, Find Close, Rename File, Delete File, Create New File, Flush File Buffers.

The computer controller synchronizes the work of all clients, collects information about the progress of the test and calculates the total network traffic between the server and the network. On the server itself, no programs are installed and does not start, which fully corresponds to the ideology of the file server.

During the test, the number of working clients has gradually increased, while the dependence of the network traffic is measured in megabits per second, from the number of working clients. The program theoretically supports up to 1000 customers, but it should be borne in mind that each client works in stressful mode and emulates the work of several dozen real customers.

Package WebBench 5.0.

WebBench package defines servers performance when using them as web servers.

On each of the computers connected to the local network, the client software is installed, which simulates the work of the Web browser. On the RAID server of the server, a working space is created common to all customers, imitating a real Web site with a volume of about 61 MB and consisting of a folder tree in which 6160 files of type * 1EXT1L, * .GIF and test executable files are placed, and in the CGI- folder BIN - dynamic executable modules. Modules implement a different query interface to server: CGI (Common Gateway Interface) and ISAPI (Internet Server API).

The Web server receives requests from clients, processes them and sends the answers. Depending on the type of request, it will be either sending a file from the workspace, or the data received by the server as a result of performing dynamic executable files.

Each client measures the server's response time to perform its requests, calculates the network traffic created by it, registers the number of queries executed and transmits the data obtained to the computer-controller, which synchronizes the operation of all customers and calculates the total result.

During the test, the number of working clients gradually increased so that the dependence of the queries processed by the server per second, and network traffic, measured in megabits per second, from the number of working clients.

WebBench 5.0 package provides the ability to test the Web server in normal and SSL mode. But since to install the SSL mode, you need to receive a security certificate, and the overwhelming majority of open Web servers work without an SSL mode, then this mode has not been used in these tests.

From the WebBench 5.0 package, three tests are performed that imitating various WEB server modes: Static (WebBench Static), dynamic with the SIMCGI.EXE module (WebBench CGI) and dynamic with the SIMISAPI.DLL module (WebBench ISAPI).

To increase the load on the server, the WebBench CGI and WebBench ISAPI tests were performed with increased to 4 and 10, respectively, the number of load generators on the client (set when setting the test by the Engines Per Client parameter). Values \u200b\u200bwere selected experimentally.

According to the test results, the most productive files and Web servers were determined. The winner in the category "The most productive file server" was determined by the maximum integral result in the NetBench test, which was calculated as the average traffic value for all runs (each run passes with different numbers of activated clients).

Among Web servers, the best was determined by the maximum final result in the WebBench test, which was calculated as the average geometric from integral results in Static, CGI and ISAPI tests. The integral result in each of the WebBench tests was defined as the average value of the number of transactions on all runs (each run was held with different numbers of activated clients).

Test results

ak we have already noted last year, the performance of two-processor servers has increased so much that a gigabit network interface becomes a narrow server in the individual operating modes of the server, and this test confirmed this output. In three tests from four conducted (NetBench, WebBench Isapi and WebBench Static), the network interface has a network interface in leaders practically reaches 100%, and only in the CGI test of the server is limited to the processor capacity.

Almost all servers participating in our previous testing were collected in the corps of the pedestal type. However, this time we tried to formulate testing conditions in such a way as to interest manufacturers in providing servers collected in compact racks. We partially succeeded in a partially, and several servers took part in the tester, with a height of 1 U and 2 U, but their configuration was very far from the maximum possible and they could not compete with leaders. The best result among compact servers showed the DESTEN NAVIGATOR RM 7320U1L server.

NetBench test results

NetBench test results are presented in Table. 2 and in fig. one.

The best performance in the NetBench test was demonstrated by Klondike AS servers from Klondike Computers and Nix S4000ABK / PRO (SO240PGA) from Nix - Computer Supermarket. AMD Opteron 280 dual-core processors are used in both servers.

Among the servers on Intel processors, the best result was at the Klondike PreSiDent 1500A server contest with the Intel Xeon processors of 3.8 GHz.

The difference in server performance on various platforms has not changed compared to last year. It is interesting to note that the Klondike President 2000A and Kraftway GEG EXPRESS 200 ED21 servers in which the Intel Xeon Dualcore dual-core processors are used significantly behind.

WebBench test results

The final results of the test WebBench are given in Table. 3.

Table 3. Total WebBench test results (webbench_2006.xls file, leaf result)

In this test, the best final indicators were also at the servers, in the design of which used AMD Opteron 280 dual-core processors. The winners were Klondike AS and Etegro Hyperion RS380 winners. However, their leading position was due to a significant advantage in only one test - CGI, and in two other tests - ISAPI and STATIC - never inferior to leaders, and sometimes even superior to their Klondike President 1500A, which was tested outside the competition. The servers on the Intel Xeon Dualcore processors again fell behind.

The results of individual WebBench tests are given in Table. 4-6 and in fig. 2-4.

In the WebBench CGI test, the processor load on the saturation site reaches 100% at low loading of the network interface, so the result in this test is determined by the performance of the processor. The best result showed the Klondike AS server. The performance of the servers using AMD Opteron 280 dual-core processors was significantly higher than everyone else. Comparing their results with the results of the DESTEN NAVIGATOR 7280L server, which uses AMD Opteron 250 single-core processors operating on the same clock frequency (2.4 GHz), it should be noted the high efficiency of the Opteron dual-core processor. Performance growth when adding a second core reaches 80%.

In the WebBench ISAPI and WebBench Static tests, processors are loaded significantly less, and the main load falls on the server's network interface, which reaches 100% utilization. Under these conditions, the advantage of servers on dual-core processors AMD Opteron disappears. In the WebBench Isapi test, the best indicator has the Klondike PreSiDent 1500A server, and in the WebBench Static test, the Klondike AS and Klondike PreSiDent 1500A servers have been leading almost with the same results. It should be noted that the indicators demonstrated by the leaders in the WebBench Static test this year are practically no different from the results of last year's testing, which is not surprising, because changes in the network interface did not happen.

Editor's Choice

provises of testing were determined in the nominations "The most productive file server" and "the most productive web server". In both nominations, servers were defeated on the database of dual-core AMD Opteron processors.

The choice of winners in the first nomination was based on the NetBench test results 7.0.3: servers were the winners and owners of the sign "Editor's Choice" Klondike As. and Nix S4000ABK / PRO (SO240PGA).

The best models in the nomination "The most productive Web server" were determined by the final result in the WebBench 5.0 test. We won this nomination and got a sign "Choice of Editor" Servers Klondike As. and ETEGRO HYPERION RS380..

Test participants

The DESTEN NAVIGATOR series from Desten Computers is designed for use as file and proxy servers, mail servers and database servers. Their low price and scalability allow you to build low-budget solutions for small and medium businesses.

The DESTEN NAVIGATOR 7280L model is a server option on the AMD platform. It is assembled on the basis of the MSI K8D Master3-FS motherboard (MS-9161) and is equipped with two AMD Opteron 250 processors with a clock frequency of 2.4 GHz and 2 GB of RAM DDR333 with ECC error correction operating in two-channel mode. Two kingston kvr333d4r25 / 1g memory modules are used with a capacity of 1024 MB of each.

A two-processor MSI K8D Master3-FS system board (MS-9161) with Socket 940 connectors built on the AMD 8000 system logic set (AMD8131 + AMD8111) and is designed to work with AMD Opteron processors 200 and 100 supporting AMD X86-64 technology. The board has 12 connectors to install DDR200 / 266/333/400 memory modules, and the maximum size of the supported memory is 24 GB. You can use both double-sided and unilateral modules with support or without ECC support.

The system board contains three 64-bit PCI-X slot (66/100/133 MHz) connected to two independent AMD8131 controller tires, and one 32-bit PCI slot (33 MHz). In one of the PCI-X slots (green), it is possible to install the Zero Channel RAID controller.

The board integrated ATI Rage XL video controller with 8 MB of video memory and a two-port gigabit network controller based on the Broadcom BCM5704C chip, connected to the PCI-X bus (64 BIT / 100 MHz). There is also an integrated single-channel ULTRA320 SCSI controller Adaptec AIC-7901.

For the organization of the disk subsystem, the server uses a two-channel SCSI RAID controller Intel SRCU42X with 128 MB of cache and autonomous emergency power supply (BBU) supporting the construction of RAID arrays of levels 0, 1, 5, 10 and 50. The server's disk subsystem consists of RAID -Massiva level 10, built on four hard drives MAXTOR ATLAS 15K II 8E036J0, and a separate hard disk of the same model on which the operating system is installed. All hard drives are placed in a single-channel basket for five devices and have the possibility of hot replacement.

The server is assembled in the Evercase ECS9500 housing with a 460-W power supply.

The server cooling system includes two fans on processor radiators, two fans, cooling baskets with hard drives, and an exhaust fan with a diameter of 120 mm, located on the rear wall of the case.

Servers of the Navigator RM Series from Desten Computers are designed for ISP, ASP and telecommunications companies that require compact solutions with high performance. Servers of this series are mounted in 19 "Rack with high density.

DESTEN NAVIGATOR RM 7320U1L is assembled based on Intel SE7520JR2 system board with two Intel Xeon 3.2 GHz processors and equipped with 2 GB of RAM DDR2-400 MHz with ECC error correction (two Kingston KVR400D2S4R3 / 1G modules) operating in two-channel mode.

Systems SE7520JR2 with Socket 604 connectors are focused on working with Intel Xeon processors with FSB 800 MHz frequency and EM64T technology support. The board is built on the Intel E7520 system logic set that supports the PCI Express I / O subsystem and having improved functions to ensure reliability and continuity of work. The board has six connectors for installing memory modules and supports up to 12 GB of register dual-channel DDR2-400 MHz memory with ECC error correction. There are possibilities for mirroring memory and allocating modules into a hot reserve.

The board integrated ATI RAGE XL video controller with 8 MB of video memory and two-port controller Gigabit Ethernet Intel 82546GB.

There are two slots for installing the extension boards inserted through the Adapter (Riser Card). To one of them that supports Intel Adaptive Slot technology, two tires are connected - PCI-X 64 BIT / 66/100/133 MHz and PCI Express X4. Maps of full length and height can be installed in this slot. The type of the installed card is determined automatically, and different adapters are used. The second slot is the usual PCI-X 64 BIT / 66/00 MHz to install a half-length and height map.

The server's disk subsystem is built based on the SCSI RAID controller Intel SRCU42E with 128 MB of cache and autonomous emergency power supply (BBU) and three MAXTOR ATLAS 15K II 8E036J0 hard drives. The operating system is installed on a separate hard disk, and the remaining discs are combined into a RAID array of level 1. Hard drives are placed in compartments with the possibility of hot replacement and front access.

The server is made in the Intel SR1400 housing and is equipped with a power supply with a power of 500 W.

The cooling system of the server components is determined by the design of the housing and includes two passive radiator on processors, plastic ducts, as well as four dual and one single fan, which are simultaneously cooled and hard drives in baskets, and processors.

ETEGRO HYPERION RS380.

ETEGRO HYPERION RS380 from ETEGRO Technologies is another server on the AMD platform, which is based on the iWill DK8ES system board and is equipped with two AMD Opteron 280 dual-core processors with a clock frequency of 2.4 GHz and 4 GB of register RAM DDR400 ECC. As memory modules, eight modules of 512 MB are used each of the Corsair TwinX1024RE-3200LL sets.

A spacious 3 U format body that allows the construction of a large volume disk subsystems and the backup of the main components allow you to use this server in important applications for business, demanding on the performance and capacity of the disk subsystem. ETEGRO HYPERION RS380 is assembled in the Hyperion RS380 housing, which has a height of 3 U, and is designed to be installed in a standard 19-inch rack. The power supply has a power of 650 W.

The iWill DK8ES system, designed for servers and workstations, is based on a system logic set, which consists of NVIDIA NForce Professional 2200, which supports the PCI Express X16 bus, and the PCI-X AMD-8131 bus controller. The north bridge has a built-in four-channel SATA II controller with the possibility of organizing RAID arrays of levels 0, 1 and 10; The board has four SATA connector.

There is eight slots on the board to install the memory modules in which you can set up to 16 GB of register memory with the PC3200 / 2700/2100 error correction. To install additional extension boards on the motherboard, there are three 64-bit PCI-X slots (33/66/100/133 MHz) connected to two independent AMD8131 controller tires, and two PCI Express X16 slots, one of which operates at the X16 speed , and the second - on x2.

From the integrated on the system board of devices, you can call the ATI RageXL video controller with 8 MB of video memory and two Gigabit Ethernet-controller Broadcom PCI-E Gigabit Ethernet (BCM5721).

The server's disk subsystem is based on a two-channel SCSI RAID controller LSI Logic Megaraid 320-2x, which has 128 MB of cache memory, and nine hard drives. The operating system is installed on a separate Fujitsu MAU3036NC hard drive, and a raid-array of level 10 formed from eight Hitachi Ultrastar 15K147 Hus151436VL3800 formed from eight HITACHI HUS151436VL3800 eight hard drives.

Hard drives installed in the compartments with the possibility of hot replacement and front access are connected to a two-channel backplane (backplane). Discs that form a RAID array are divided into channels equally, and only 16 SCSI drives can be installed in the server.

The cooling system includes three fans with a diameter of 120 mm, which are located on the body partition, and two fans installed on processor radiators.

	Switch 3Com SuperStack 3 4250t (3C17302) The controlled second-level switch 3COM SuperStack 3 Switch 4250T (3C17302) is made in a light blue metal case with a size of 440x274x44 mm, which can be mounted in a standard 19-inch rack, and four rubber legs provide the possibility of desktop placement. The switch is positioned as an inexpensive solution for building a flexible network infrastructure. When used as a central switch of a third-level managed switch or high-performance switch with a gigabit port, the 3COM SuperStack 3 Switch 4250T switch is best suited for the role of the terminal device to which network clients are directly connected. Two built-in Gigabit Ethernet ports (10Base-T / 100Base-TX / 1000BASE-T) are displayed on the front panel (10Base-T / TX / 1000BASE-T), as well as 48 Fast Ethernet ports (10Base-T / 100Base-TX), grouped into three groups of 16 ports in each. All ports support work in duplex and half-duplex modes, as well as the automatic determination of the connection speed and the type of cable (AUTO-NEGOTIATION, AUTO MDI / MDI-X). The ports are made in the form of RJ-45 connectors with built-in LEDs indicating activity and connecting speed and port status. The rear panel of the switch contains the RS-232 control connector, the connector for connecting the power cable from the AC power and the backup power connector. In 3Com SuperStack 3 Switch 4250T, switching with intermediate buffering (Store and Forward). Data flow control in full-duplex mode is organized by 802.3x, and to control the data stream in half duplex mode, the back pressure method is applied (Back-Pressure). In accordance with the technical documentation, the size of the 3COM Switch 4250T switch MAC address table is designed for 8 thousand records. The bandwidth of the switch is 13.6 Gbps when using maximum length packets or 10.1 MPPs when using minimum length packets. The switch provides for the ability to combine up to four switches and manage them as a single device with one IP address. To combine switch switches, no additional equipment is required; At the same time, Switch 4226t switches (3C17300) and Switch 4228G (3C17304) can also be included in the stack. From the additional functionality of the switch, we call support for the prioritization of frames 802.1p (two priority steps for each port), the possibility of organizing a trunk union of ports in the 802.3 AD protocol. There is an organization to 60 virtual networks according to 802.1Q. Supported both local and remote switch control. Local control is performed through the RS-232 serial port. Remote (network) control is implemented via Telnet or through a built-in web server; SNMP and RMON protocols (Statistics, History, Alarms, Events) protocols are supported. It should be emphasized that in terms of functionality, remote control is similar to the console. Switch supports STP, RSTP, IGMP protocols. The kit includes 3COM Network Supervisor software, which allows you to configure the system with the display of connected devices in the form of a graphic circuit and track the operation of the network, issuing messages and fault reports and errors. The editorial board thanks Merlion (www.merlion.ru) for providing a 3COM SuperStack 3 4250T switch.

Klondike As.

The Klondike AS model from Klondike Computers is an example of a universal server on the AMD platform. The server is built on the Tyan K8SD Pro system board with a set of AMD 8000 system logic (AMD 8131 + AMD 8111) and is equipped with two new AMD Opteron 280 dual-core processors with a clock frequency of 2.4 GHz and 2 GB of register memory PC3200 with correction Errors (four modules of 512 MB Corsair).

Tyan K8SD Pro allows you to build up the amount of RAM up to 16 GB, for which there is eight slots on the board to install the PC3200 / 2700/2100 register memory modules. To install additional devices on the motherboard, there are four 64-bit PCI-X slots (two slots per independent PCI-X-tire of the AMD 8131 controller) and one 32-bit PCI slot (connected to the AMD 8111 controller).

The board is integrated by ATI RageXL video controller with 8 MB of video memory, as well as a two-port gigabit Ethernet-controller Broadcom BCM5704C, which uses the PCI-X bus. There is also an Intel 82551Qm 10/100 network controller, which can be used to remotely control the server. And the last integrated device to pay attention is the four-channel SATA RAID controller Silicon Image SIL3114 SATA RAID Accelerator with the ability to organize Raid arrays of levels 0, 1 and 10, which uses a 32-bit PCI bus.

Note that, despite the presence of an integrated gigabit network controller, an additional two-port gigabit network controller Intel Pro / 1000 MT Dual Port Server Adapter is installed in the Klondike AS server, which was used by us during testing, since it allows you to get higher results compared to Integrated Broadcom BCM5704C controller.

The server's disk subsystem is based on the SCSI RAID controller Intel SRCU42X with 512 MB of cache and on five hard disks of Fujitsu MAU3036NC installed in a single-channel basket for six devices with the possibility of hot disk replacement. The operating system was installed on a separate hard disk, and the remaining discs were combined into a raid-array of level 10. To enhance reliability, a RAID controller was used with the BBU unit.

The Klondike AS server is assembled in the Inwin R3000 enclosure, equipped with a power unit with a total capacity of 700 W. The high reliability power supply consists of a power distribution board and three blocks, one of which works in a hot reserve mode.

The process of cooling components of the server consists of two active processor radiators, additional cooling units for memory modules, a twined 120mm fan on the rear wall of the server and two fans, cooling basket with hard drives.

The Universal Server Klondike Present 2000A from Klondike Computers is designed for corporate departments and medium-sized businesses. It can provide joint access to the information of a large number of users and the work of a variety of network services.

The server is assembled on the Supermicro X6DH3-G2 system board with two dual-core Intel Xeon Dualcore 2.8 GHz processors and is equipped with 2 GB of RAM DDR2-400 MHz with ECC error correction operating in two-channel mode.

The X6DH3-G2 system board with Socket 604 connectors is focused on working with single and dual-core Intel Xeon processors with an FSB 800 MHz frequency and support for EM64T technology. The board is built on the Intel E7520 system logic set, supports the PCI Express I / O subsystem and has improved functions to ensure reliability and continuity of work.

The board has eight connectors for installing memory modules and supports up to 16 GB of register dual-channel DDR2-400 memory with ECC error correction. There are possibilities for mirroring memory and allocating modules into a hot reserve. There are ample opportunities for installing expansion boards. Two PCI Express X8 slots are installed, three 64-bit PCI-X slot and one 32-bit PCI slot (33 MHz). PCI-X slots are connected to two independent Intel 6700PXH controller tires, one of them operates at a frequency of 133 MHz, and two - at a frequency of 100 MHz. One of the PCI-X 100 Slots 100 MHz (Green) It is possible to install the ZERO CHANNEL RAID controller.

The board integrated ATI RAGE XL video controller with 8 MB of video memory and two Gigabit Ethernet Intel 82541p1 controller. In addition, there is an Adaptec AIC 9410W Zero Channel Sas Raid Controller controller.

To enhance the performance of the network interface in the server, a two-port network adapter Intel Pro / 1000 MT Dual Port Server Adapter is installed, with which the server worked during testing.

For the organization of the disk subsystem, the server uses a two-channel SCSI RAID-controller Intel SRCU42X with 512 MB of cache and autonomous emergency power supply (BBU) supporting the construction of RAID arrays of levels 0, 1, 5, 10 and 50. The server's disk subsystem consists of RAID -Massive level 10 built on four hard disks Fujitsu MAU3036NC, and a separate hard disk of the same model on which the operating system is installed. All hard drives are placed in a single-channel basket for six devices and have the ability to hot replace. Installing an additional basket is also possible.

The server is enclosed in the Intel SC5300 case. The server power system consists of a power distribution board and two 730-W power supply units operating in a hot-reserve mode, that is, they can be replaced without a power outage.

The cooling system of the server components includes two passive processor radiator, and for an efficient heat sink, plastic ducts included in the package of the housing are used, and four powerful controlled fans with a hot-swappable function that create the necessary air flow passing at the same time through the discs in the basket and processor radiators.

This server from Kraftway is intended for uninterrupted maintenance of e-commerce applications. It can also be used to organize a remote office and database support. The server has high performance, high operational reliability and fault tolerance. The configuration of the server includes a printed manual of the user in Russian, which contains detailed information on the technical characteristics of the server and the capabilities of the components of the components of it, as well as information about the methods of configuring the server, maintenance and upgrades. Note that among all domestic servers presented in our review, only KRAFTWAY servers are completed with such a guide.

This model is a classic version of the Intel platform and is almost entirely assembled on the basis of the components of this company. The server is based on the Intel SE7520AF2 system board with two dual-core Intel Xeon Dualcore 2.8 GHz processors and equipped with 2 GB of RAM DDR2-400 MHz with ECC error correction operating in two-channel mode.

The SO7520AF2 two-processor system board with Socket 604 connectors is designed to work with single and dual-core Intel Xeon processors with FSB 800 MHz frequency and EM64T technology support. The board is built on the Intel E7520 system logic set that supports the PCI Express I / O subsystem and having improved features to ensure reliability, continuity of operation and convenience in maintenance.

The board is equipped with eight connectors for installing memory modules and supports up to 16 GB of register dual-channel DDR2-400 memory with ECC error correction. It is possible to mirror the memory and the selection of modules into a hot reserve. Three PCI-X slots are connected to two independent tires: two of them operate at a frequency up to 133 MHz, one - up to 100 MHz. PCI Express (x8 and x4) slots are connected directly to the North Bridge.

The board integrated ATI RAGE XL video controller with 8 MB of video memory and two-port controller Gigabit Ethernet Intel 82546GB. There is a two-channel SCSI RAID controller LSI Logic 53C1030 ULTRA320 SCSI, which supports RAID 0 and 1 levels, as well as an additional SCSI RAID controller Intel SROMBU42E, implemented on the Intel IOP332 processor, for which a separate connector is provided for memory installation (up to 256 MB) integrated With the BBU module. The RAID controller supports RAID levels 0, 1, 5, 10 and 50. To activate an additional RAID controller, the Intel Raid Activation Key kit is required, which is purchased separately.

The server's disk subsystem is based on the SCSI RAID controller LSI Logic Megaraid 320-2x and ten Fujitsu MAU3036NC hard drives installed in two baskets (for four and six devices), which can be equipped with hot swaps and connected to different RAID controllers. The operating system was installed on a separate hard disk, and the remaining nine disks were combined into a RAID array of level 5, which gives the maximum useful use of disk space.

The server is made in the Intel SC5300 housing. The server power system consists of a power distribution board and two 730 W power supply units operating in the hot-reserve mode and replaced without a power outage. The server has a control module with an LCD screen, which allows you to quickly control the server's status.

The server's components cooling system consists of two passive processor radiator; For an efficient heat sink, plastic ducts are used from the body supply kit and four powerful controlled fans with a hot replace function that create a airflow passing simultaneously through discs in baskets and through processor radiators.

	Klondike Pressident 1500A - Server from "Klondike Computers" on the Intel platform, built on the ASUS NCCH-DR system board with the Intel E7210 system logic set and equipped with two Intel Xeon processors 3.8 GHz and 2 GB of PC3200 memory (four modules of 512 MB) which functions in two-channel mode. The ASUS NCCH-DR system board allows you to increase the amount of RAM up to 4 GB, for which there are four slots to install the memory modules. Memory modules are supported by PC3200 / PC2700 memory as with error correction and without it. To install additional extension boards, two 64-bit PCI-X slots and three 32-bit PCI slots are provided. The board integrated ATI RageXL video controller with 8 MB of video memory and two single-port gigabit Ethernet controller - Intel Pro / 1000 CT Network Connection (Intel 82547GI) and Intel Pro / 1000 Network Connection (Intel 82541GI). When selecting a network controller for organizing a server communication channel with a local network, you should prefer 64-bit Intel Pro / 1000 CT Network Connection control, which uses the CSA bus (Communication Streaming Architecture) with a bandwidth of 266 MB / s, and 32-bit Intel controller Pro / 1000 Network Connection can be used to remotely manage the server or to create a backup. For the organization of the disk subsystem, the server uses a two-channel SCSI RAID-controller Intel SRCU42X with 512 MB of cache and autonomous emergency power supply (BBU) supporting the construction of RAID arrays of levels 0, 1, 5, 10 and 50. The server's disk subsystem consists of RAID -Massive level 10 built on four hard disks Fujitsu MAU3036NC, and a separate hard disk of the same model on which the operating system is installed. All hard drives are placed in a single-channel basket for six devices and have the possibility of hot replacement. The Klondike PreSiDent 1500A server is made in the Intel SC5275-E enclosure, equipped with a power supply unit of 600 W. The design of the housing provides for the installation of active processor radiators (the air ducts in this case are not provided). In addition, to create an effective heat sink system, additional fans (without hot-swappable functions) are installed on a basket with hard drives and on the back wall of the housing (120-millimeter).

The GEG Express ISP ES23 model from Kraftway is designed for reliable and uninterrupted service service of resource-intensive Internet / intranet applications, email, document management, hosting, caching. To increase the reliability, all critical components in the server are duplicated; In addition, hard drives, power supplies and cooling fans in the server allow you to replace them without interrupting the functioning of the server. The server is completed with the printed user guide in Russian, which contains detailed information on the technical characteristics of the server and the capabilities of the components of the nodes, as well as information about the methods of configuring the server, maintenance and modernization.

The server is made in a low-profile case 2 U, designed for installation in a 19 "rack, and has compactness, which allows to achieve high performance in a limited amount of space, ease of maintenance, wide upgrade opportunities.

Kraftway GEG Express ISP ES23 is assembled based on the Intel SE7520JR2 system board with two dual-core Intel Xeon Dualcore 2.8 GHz and 2,800 MHz 2 GB of RAM 400 MHz with ECC error correction (two Samsung M3 93T2950BG0-CCC modules) operating in dual channel mode .

A two-processing system board SE7520JR2 with Socket 604 connectors is focused on working with single and dual-core Intel Xeon processors with FSB 800 MHz frequency and support for EM64T technology. The board is built on the Intel E7520 system logic set that supports the PCI Express I / O subsystem and having improved features to ensure reliability, continuity of operation and convenience in maintenance.

The board is equipped with six connectors for installing memory modules and supports up to 12 GB of register dual-channel DDR2 400 MHz memory with ECC error correction. There are opportunities for mirroring memory and allocating modules in a hot reserve.

The board integrated ATI RAGE XL video controller with 8 MB of video memory and two-port controller Gigabit Ethernet Intel 82546GB. In addition, there is a two-channel (one internal and one external) SCSI RAID controller LSI Logic 53C1030 Ultra320 SCSI, supporting RAID levels 0 and 1.

The server has a fairly wide possibilities for installing the extension boards, for which two slots are provided on the system board (extension boards are installed through the adapter - Riser Card). To one of them that supports Intel Adaptive Slot technology, two tires are connected - PCI-X 64 bits 66/100/133 MHz and PCI Express X4, and in this slot you can set up to three full length and height cards. The interface of the installed maps depends on the adapter used (three PCI-X 66/100 MHz cards, or one PCI-X 100 MHz card and two PCI-X 133 MHz cards, or one PCI-x 100 MHz and two PCI Express X4 cards), Moreover, the type of the installed card is determined automatically. The second slot is a conventional PCI-X slot 64 bits 66/100 MHz to install up to three half-length and height cards.

The server's disk subsystem is based on the SCSI Intel SRCU42X RAID controller with 128 MB of cache and on six SEAGATE CHEETH 15K.3 ST336753LC hard drives. The operating system is installed on a separate hard drive, and the remaining discs are combined into a RAID array of level 5. Hard disks are placed in compartments with the possibility of hot swap and front access and connected to a single-channel backplane (backplane).

The system of cooling components of the server is determined by the design of the housing and includes two passive radiator on processors, plastic ducts, as well as four or eight controlled fans, which are simultaneously cooled and hard drives, and processors.

The server has an Intel SR2400 housing. The power system of this server consists of a power distribution board and two 700 W power supply units operating in a hot-reserve mode and replaced without a power outage. The server uses a control module with an LCD screen, which allows you to quickly monitor the state of the server.

Considering the high performance of the server among platforms on Intel processors, as well as the availability of detailed documentation in Russian, we decided to award this model "Editor's editorial" sign, since this model fully meets all the basic requirements for modern servers.

The TEAM Server 2400A model from Tim Computers belongs to a new series of compact universal servers based on Intel Xeon processors with 800-MHz bus and support technology EM64T. The servers of this family are available in the compact housing (2 U for a rack mounting), have high performance and scalability and are intended for use as a domain controller, file servers, terminal servers and small databases.

The server is based on the Intel SE7520JR2 system board with two Intel Xeon 3.0 GHz processors and is equipped with 2 GB of DDR2 400 MHz RAM with ECC Error Correction (Four Kingston Modules). This system board with Socket 604 connectors is designed to work with single and dual-core Intel Xeon processors with an FSB 800 MHz frequency and EM64T technology support. The board is built on the Intel E7520 system logic set, supports the PCI EXPRESS I / O subsystem and has improved functions to ensure reliability and convenience in maintenance.

The board is equipped with six connectors for installing memory modules and supports up to 12 GB of register dual-channel DDR2 400 MHz memory with ECC error correction. It is possible to mirror the memory and the selection of modules into a hot reserve.

The board integrated ATI RAGE XL video controller with 8 MB of video memory and two-port controller Gigabit Ethernet Intel 82546GB. There is also a two-channel (one internal and one external) SCSI RAID controller LSI Logic 53C1030 ULTRA320 SCSI, supporting RAID levels 0 and 1.

The server provides very wide possibilities for installing the extension boards, for which there are two slots on the motherboard (extension boards are installed via Riser Card). To one of them that supports Intel Adaptive Slot technology, two tires are connected - PCI-X 64 bits 66/100/133 MHz and PCI Express X4. You can set up to three full length and height cards to this slot. The interface of the installed maps depends on the adapter used (three PCI-X 66/100 MHz cards, or one PCI-X 100 MHz plus two PCI-x 133 MHz, or one PCI-X 100 MHz plus two PCI Express X4). The type of the installed card is determined automatically. The second slot is the usual (PCI-x 64 bits / 66/00 MHz) and serves to install up to three half-length and height cards.

For the organization of the disk subsystem, a two-channel SCSI RAID controller Intel SRCU42E is used with 128 MB of cache. The server's disk subsystem consists of a RAID array of level 1, built on two SEAGATE CHEETAH 10K.7 ST373207LC, and a separate seagate cheetah 10k.7 ST336807LC, where the operating system is located. Hard drives are installed in the compartments with the possibility of hot replacement and front access and connected to a single-channel backplane (backplane).

The server is enclosed in the Intel SR2400 housing. The server's power supply system includes a power distribution board and two power supplies with a capacity of 700 W each. Blocks work in a hot reserve mode, and they can be replaced without turning off the server power.

The system of cooling components of the server is determined by the design of the housing and includes two passive radiator on processors, plastic ducts, as well as four controlled fans, at the same time cooling hard drives in baskets and processors.

Nix S4000ABK / PRO (SO240PGA)

High Performance Universal Server S4000ABK / PRO (SO240PGA) from "Nix - Computer Supermarket" represents another server on the AMD platform.

It is based on the Tyan Thunder K8WE system board (S2895UA2NRF) and is equipped with two AMD Opteron 280 dual-core processors with 2.4 GHz clock frequency and 4 GB of register RAM DDR400 ECC. Eight modules of 512 MB each (four sets of Corsair twinx1024re-3200ll) are used as memory modules.

The Thunder K8We system board is positioned by the manufacturer as a board for high-performance workstations and has very wide possibilities. The board is based on the system logic set consisting of NVIDIA NForce Professional 2200, NVIDIA NForce Professional 2050 and the PCI-X AMD-8131 bus controller.

The board is equipped with two PCI Express X16 slots (one by one from NForce Professional 2200 and NForce Professional 2050), three 64-bit PCI-X slots (100/133 MHz) connected to two independent AMD8131 controller tires, and a single PCI slot 32 bits 33 MHz. The NForce Professional 2200 has a four-channel SATA II controller (300 MB / s per channel) with the possibility of organizing Raid arrays of levels 0, 1, 5 and 10; In addition, four SATA connectors are installed on the board. There is also a two-channel SCSI RAID controller LSI Logic 53C1030 Ultra320 SCSI, which supports RAID 0 and 1 levels.

There is eight slots on the board to install the memory modules in which you can set up to 16 GB of register memory with the PC3200 / 2700/2100 error correction. CHIPKIL technology is supported.

Two Ethernet Channels are implemented via NForce Professional 2200 and NForce Professional 2050. In addition, the support of the Fireware bus and sound (Analog Devices 1981b codec) are integrated.

Since the motherboard does not have an integrated video controller, then the Gigabyte GeForce6200TC board is used as a video card.

The server has an optional Gigabit Ethernet Adapter Intel Pro / 1000 MT Server Network, which was used when testing.

To organize the disk subsystem, the server has a two-channel SCSI RAID controller Intel SRCU42E with 128 MB of cache and autonomous emergency power supply (BBU). The server's disk subsystem consists of a level 10 RAID array built on ten Maxtor ATLAS 15K II 8E073J0 hard drives, and from a separate hard disk of the same model on which the operating system is installed. Hard disks included in the RAID array are placed in two baskets for five devices connected to different RAID controller channels and have the possibility of hot replacement. The hard disk with the OS is installed in an additional (on three devices) a basket that occupies two five-dimensional compartments, and is connected to the LSI Logic 53C1030 controller. Also in this basket there is a second similar hard disk, under standard operating conditions, intended to ensure the fault tolerance of the OS, but during the testing process, when the operating system was not assumed to install the operating system on RAID arrays, it was used to store the SWAP file.

Nix S4000ABK / PRO (SO240PGA) is assembled in the Supermicro CSE-942S-600B case, which, using a special kit, can be installed in a standard 19-inch rack, and its height will be 4 U. Server power is carried out from the power supply unit with a total capacity of 600 W which consists of a power distribution board and three blocks operating according to Scheme 2 + 1 (one of the blocks is always in hot reserve). Blocks can be replaced without turning off the server power.

The cooling system consists of two fans with a diameter of 120 mm located on the housing partition, one fan on an additional basket, two fans on processor radiators and an exhaust fan with a diameter of 120 mm, which is located on the rear wall.

Universal Server Nix S4000BKK / PRO (SX32APRI) from the company "Nix - Computer Supermarket", intended for corporate departments and for medium-sized businesses, can provide joint access to information of a large number of users and the work of a wide variety of network services.

The server is assembled based on the Supermicro X6DH8-XG2 system board with two Intel Xeon 3.2 GHz processors and equipped with 4 GB of RAM DDR2 400 MHz with ECC error correction operating in two-channel mode.

The X6DH8-XG2 system board with connectors of Socket 604 is focused on working with single and dual-core Intel Xeon processors with an FSB 800 MHz frequency and support for EM64T technology. The board is built on the system logic set of Intel E7520, supports the PCI Express I / O subsystem and has improved functions to ensure reliability and continuity of work.

The board is equipped with eight connectors for installing memory modules and supports up to 16 GB of register dual-channel DDR2-400 memory with ECC error correction. There are possibilities for mirroring memory and allocating modules into a hot reserve.

To install the extension boards, the PCI Express X8 slot and five 64-bit PCI-X slots are located, three of which operate at a frequency of 133 MHz, and two at a frequency of 100 MHz.

One of the PCI-X 100 Slots 100 MHz (Green) It is possible to install the ZERO CHANNEL RAID controller.

PCI-X slots are distributed across the four independent busbars of two Intel 6700PXH controllers.

The board integrated ATI RAGE XL video controller with 8 MB of video memory, a two-port controller Gigabit Ethernet Intel 82546GB and a two-channel Ultra320 SCSI controller Adaptec AIC-7902.

For the organization of the disk subsystem, the server uses a two-channel SCSI RAID controller Intel SRCU42X with 128 MB of cache and autonomous emergency power supply (BBU). The server's disk subsystem consists of a level 10 RAID array, built on ten hard drives MAXTOR ATLAS 15K II 8E073J0, and a separate MAXTOR ATLAS15K II 8E036J0 hard disk, where the operating system is installed. Hard discs included in the RAID array are placed in two baskets (on five devices each) connected to different channels of the RAID controller, and provide the possibility of hot replacement. The hard disk with the OS is installed in an additional (for three devices) a basket that occupies two five-dimensional compartments, and is connected to the Adaptec AIC-7902 controller. Also, this basket provides a second similar hard disk, under conditions of standard operation, intended to ensure the fault tolerance of the OS, but in the testing process that did not intend to install the operating system on RAID arrays, it was used to store the SWAP file.

Nix S4000BKK / PRO (SX32APRI) is made in the Supermicro CSE-942S-600B case, which, using a special kit, be installed in a standard 19-inch 5-Up height rack. Server power is carried out from 600-W power supply, which consists of a power distribution board and three blocks operating according to the 2 + 1 scheme (one of the blocks is always in hot reserve) and replaced without turning off the server.

The cooling system consists of three fans with a diameter of 120 mm located on the hull partition, two fans on the processor radiators and the exhaust fan with a diameter of 120 mm on the back wall.

EXION-MAJOR EC27 server from Inel Data is built on the Intel SE7520BD2 D2 system board with two Intel Xeon 3.0 GHz processors and equipped with 4 GB of RAM DDR2 400 MHz with ECC error correction operating in two-channel mode (four 1024-MB Kingston module).

The two-processor SE7520BD2 D2 system board with connectors of type Socket 604 is designed to work with single and dual-core Intel Xeon processors with an FSB 800 MHz frequency and EM64T technology support. The board is built on the Intel E7520 system logic set, supports the PCI EXPRESS I / O subsystem and has improved functions to ensure reliability and convenience in maintenance.

The board has eight connectors for installing memory modules and supports up to 16 GB of register dual-channel DDR2-400 memory with ECC error correction. Memory mirroring and modules are highlighted in a hot reserve. For installation of the extension boards, one PCI Express X4 slot is provided, one PCI slot 32 bits / 33 MHz and three 64-bit PCI-X slot with the possibility of hot replacement. PCI-X slots are connected to two independent Intel 6700PXH bus, and one of them operates at a frequency of 133 MHz, and the rest - at a frequency of 100 MHz.

The board integrated ATI RAGE XL video controller with 8 MB of video memory and two gigabit Ethernet controller - Marvell Yukon 88E8050 PCI-E Gigabit Ethernet and Intel 82541pi Gigabit Ethernet. There is also a two-channel SCSI RAID controller LSI Logic 53C1030 Ultra320 SCSI, which supports the levels of RAID 0 and 1, although the connector is only installed on one channel.

To organize the disk subsystem, the server uses a two-channel SCSI RAID controller Intel SRCU42E with 128 MB of cache. The server's disk subsystem consists of a RAID array of level 5, built on three SEAGATE CHEETAH 15K.3 ST373457LC, and a separate seagate Cheetah 10K.7 ST336807LC hard disk, on which the operating system is installed. All hard drives are placed in a single-channel basket for six devices and have the ability to hot replace.

The server is enclosed in the Intel SC5300 case. The servers power system consists of a power distribution board and a power supply of 730 W; To enhance reliability, you can install a second power supply.

The cooling system of the server components includes two passive processor radiator, plastic ducts, guide airflow, and two controlled fans with a hot-swap function.

The EXION-MAJOR LC27 model from Inel Date is collected on the Intel SE7520JR2 system board with two Intel Xeon 3.0 GHz processors and 400 GB is equipped with DDR2 400 MHz with ECC error correction (four Kingston modules).

SE7520JR2 system board with Socket 604 connectors is designed to work with single and dual-core Intel Xeon processors with an FSB 800 MHz frequency and EM64T technology support. The board is built on the Intel E7520 system logic set, supports the PCI Express I / O subsystem and has improved functions to ensure reliability and convenience in maintenance.

The board has six connectors for installing memory modules and supports up to 12 GB of register dual-channel DDR2 400 MHz memory with ECC error correction. There are possibilities for mirroring memory and allocating modules into a hot reserve.

The board integrated ATI RAGE XL video controller with 8 MB of video memory and two-port controller Gigabit Ethernet Intel 82546GB. In addition, there is a two-channel (one internal and one external) SCSI RAID controller LSI Logic 53C1030 ULTRA320 SCSI, which supports RAID levels 0 and 1.

On the motherboard there are two slots to install the extension boards (installed via Riser Card). To one of them that supports Intel Adaptive Slot technology, two tires are connected: PCI-X 64 bits 66/100/133 MHz and PCI Express X4. In this slot, cards of full length and height can be installed, and the type of the installed card is determined automatically (different adapters are used for installation). The second slot is the usual PCI-x 64 bits 66/100 MHz, which serves to install a half-length card and height.