DIY clamp for a table lamp. DIY table lamp: electrical, lighting, construction, design. Types of bases and bulbs for table lamps

Sufficient lighting is important in any room: in the office, bedroom, living room, kitchen, bathroom and children's room. It is especially important in work areas in the evening, when there is not enough sunlight. Modern table lamps with mounts perfectly meet this need. And due to the wide variety of current models, they will fit perfectly into any interior.

Design Features

A table lamp with a mount is a lighting device that performs practical and decorative functions. Like a classic lamp, this type has several main parts that ensure its uninterrupted operation - a support, a column, a housing, an artificial light source and a power cord.

The support, or, as it is also called, the base, is presented in the form of a clamp that secures the structure to the table or surface. A clamp is a fixation device consisting of a clamp and a fixed frame. Thanks to it, the lamp is attached to a table up to 6 centimeters thick. In a simplified version, the support can be made in the form of a large clothespin and can even be mounted on a wall.

The column of a table lamp with mount looks like a flexible leg connecting the base and the body. It allows you to change the direction of the light flux due to the mobility of the parts it consists of. The body is a bell that directs the light. It is made from glass, metal and plastic in various colors.

An artificial light source is the main component of any lighting device. LED, fluorescent and incandescent lamps can be used for lighting.

Energy-saving light bulbs, which are popular nowadays, have many advantages - they have a long service life, energy saving and compliance with modern requirements. All these qualities outweigh their high cost.

Almost always, a table lamp with a mount has a switch on the pole or power cord. Dear models made with a brightness adjustment mechanism. Because of this, there is a reduction in electricity consumption and, accordingly, a reduction in charges for it. And thanks to the smooth start-up, the durability of the entire structure increases.

Varieties

Table lamps with mounts are the same in purpose, but vary in their appearance, design and color. This article will not let you get confused in the variety of modern models and will help you with your choice.

Power and voltage

Various luminaires are designed to operate the following types of light bulbs:

• LED;
• luminescent;
• incandescent lamps.

Typically, dim lamps with a power of 60 W are used, since table lighting devices are designed for spot illumination of the surface.

It is worth paying attention to the product labeling. It indicates the mains voltage. In most cases this is 220 V - such lamps are suitable almost everywhere. However, both 110 and 127 V are found. In this case, it may be necessary to power the device through a transformer.

Types of fastening

There are several types of mounting a table lamp support:

• clamp;
• pin;
• sucker;
• bracket.

The special design of the clamp allows you to firmly fix the device on the table. Thanks to its simple structure, even a child can install a lamp on a clothespin. Although it is easier to move it, unlike the first option. The suction cup is not the most popular type of fastening. It can withstand light weight, so the lamp on the suction cup serves, rather, for decorative functions.

But thanks to the bracket, the lamp can be hung on the wall next to the table. This option frees up the workspace and allows you to direct the light from above. But it is quite difficult to install: it requires the use of a drill, dowels and a building level.

Frame

Floor lamps vary in color and material. And if color diversity cannot be described, then classification of materials can be as follows:

• metal;
• plastic;
• glass;
• textile.

Metal surfaces are durable and provide reliability to the entire structure. However, such a lamp has significant weight. But lightweight plastic lamps can be painted in various colors and have a low price. But they, like weathered floor lamps, have significant fragility. There are also a variety of beautiful textile lamps with a metal body.

Advantages and disadvantages

The advantages of this design include:

• the ability to regulate the direction of the light flux due to the flexibility of the device;
• saving of working space due to the small size of the support and the possibility of mounting on the wall of some types;
• static mounting, which allows you not to be afraid of the lamp tipping over or falling;
• ease of construction;
• the ability to select the light bulb power for each type of lamp;
• long service life if the rules of use are followed;
• various design models.

The weaknesses of such lamps are:

• difficulty in masking the power cord;
• difficulty in installing the lamp on the bracket;
• significant weight of metal models;
• fragility of glass floor lamps.

Selection rules

The quality of lighting, the results of your work and your health depend on the choice of a table lamp with a mount. It's no secret that a properly selected lamp can create comfortable conditions for the eyes. This article will indicate the characteristics that you should pay attention to before purchasing a product.

The selection begins with determining the desired location of the lamp. Table lamps with mounts can be placed directly on the tabletop or on the wall above the work area. For the first case, lamps on a clamp, clothespin or suction cup are suitable. For the second - on a bracket.

The height of a good lamp is no more than 0.5 m from the surface. The light source should be above the monitor and to the left of the person. But if you write with your left hand, then vice versa, on the right. The power cord must be able to reach the outlet without dangling or being stretched. To do this, before going to the store, measure the length from the table to the outlet in the house.

The size of the desk affects the power of the lamp. Standard lamps operate in the range from 60 to 100 W. And the larger the surface that needs to be illuminated, the high power you will need. However, a 100 W incandescent lamp can become very hot and damage the housing.

The desktop should be well lit, regardless of who is sitting at it - an office worker, a journalist, someone who likes to chat in social networks or a schoolboy. This is especially important if there is little or no natural light. A modern table lamp will help you out a lot if it is positioned correctly and mounted well. How to attach a lamp to a table? Now we will discuss this.

Two words about models

Table lamps are produced by many electrical equipment companies. The brands that are most loved by consumers are:

• Camelion;
• Odeon;
• Uniel;
• Lussol;
• Brilliant,
• Globo;
• Feron.

There are also products from other companies on sale. Price line and specifications are very diverse, so the choice depends entirely on the needs of the individual user.

Similarities and differences

Before you collect table lamp, which is attached to the table, it can be very useful to understand what kind of lamps there are for the workplace. Without exception, all table lamps are designed for local lighting. As for the differences, there are many more of them:

• type of lamps;
• power;
• mains voltage;
• fastening method;
• body material;
• lampshade design.

Power and voltage

There are devices on sale that are designed to use several types of lamps:

• incandescent;
• LED;
• luminescent.

Since table lamps play a supporting role in the overall lighting of the room, the lamps they use are not particularly bright. For example, the standard power of an incandescent lamp is 60 W.

Important! The vast majority of table lamps are designed for a mains voltage of 220 V. However, among them there are those that are made according to other standards - for example, you need a voltage of 110 V or 127 V. This is indicated on the labeling and in the instructions. This voltage is not available everywhere, so before you go to the store, you should inquire about the parameters of the electrical network in your home.

It may also turn out that you did not pay attention to the marking and bought a device rated for 127 V, while the house has 220 V. Do not rush to immediately throw away your purchase - it is quite possible that there will be a way out of the situation:

• power the device through a step-down transformer;
• look at the instructions - it is quite possible that the device can be switched;
• connect 2 identical lamps in series - however, their light will be less bright, and the spectrum will shift slightly towards the red.

Mounting method

There are still lamps on sale that are simply placed on the table. This option is familiar to many, it has its advantages, and the main one is that the lamp can be moved around the table, moved to another room, or even taken out into the garden and connected to the network using an extension cord, if you suddenly decide to settle down in a sun lounger in the evening and read a little before bed. However, an advantage very quickly turns into a disadvantage, especially if there is a careless tenant or a not very well-mannered cat in the house. One awkward move and the lamp is on the floor.

Therefore, it is much more convenient to rigidly install the lamp. If you are wondering how to attach a table lamp to a table, look at what types of fastenings are available. You will probably find several options on sale. The lamp can be attached:

• to the table on clamps;
• to the table on a clothespin;
• to the computer on suction cups;
• to the wall above the table on a special bracket.

Choosing a lamp

Having become a little familiar with the theory, it’s time to move on to practice – that is, to choosing a device. Design, of course, is important - any detail in the room must correspond to the overall style of the interior, this also applies to lighting fixtures. Grandma's heavy lamp with the tasseled shade probably still works, but does it look as good in your room? Only if your entire decor is in Retro style, then this rarity has no price. In all other cases, it is better to choose something more modern and less bulky.

There are three main considerations when purchasing:

1. The lamp should be comfortable.
2. He must perform his functions efficiently.
3. The lamp should not be allowed to clutter the table.

Convenience

Modern lamps are suitable for both a regular desk and a computer desk. They have several useful parts to ensure this. For example, a tripod. It is mobile, and two simple devices can ensure this:

• flexible tube;
• rigid tripod.

A tube

Wires leading to the light source are inserted into a flexible tube. The tube can be:

• metal;
• plastic.

In appearance and structure, it is similar to the one to which the shower head is attached, and its functions are similar, only in one case it correctly directs the flow of water, and in the other - light. When purchasing, you need to pay attention to how easily this part bends. If this can be done effortlessly, you can easily direct the light flow where you need it:

• in front of;
• up;
• to the side;
• down.

Important! Don’t forget to also check how well you can fix this element in the desired position. The tube should not bend without your desire, solely under the weight of its own lampshade.

Tripod

This part consists of two parts. Both of them are rigid, and are fastened together by a rotating mechanism. If you need to change the direction of the light flow, you simply move the lamp. The tripod halves, fastened with a screw, change position relative to each other. The tripod is also connected to the lampshade via a role-playing mechanism. This allows you to change the direction of the light by slightly turning the hood.

Mobility

Since a modern lamp is equipped with a device that allows it to direct light to any place, it is not at all necessary to move it across the table in order to illuminate some other area. That is, it can and should be fixed, especially since this provides a lot of advantages. How is a table lamp attached to a table? In one of two ways:

• on clamps;
• on a clothespin.

In the first case, the lamp is installed on the edge of the tabletop using a clamp and screw. The screw is tightened, the lamp does not move until you decide to move it to another place. When you need it, you can unscrew the screw and remove the device without any additional equipment.

The second option is even simpler - the fastening works exactly the same as any other clothespin. To remove the lamp from the table, you just need to press the plate.

Advantages of a fixed lamp

Regardless of how you prefer to attach the lamp to the table, the lamp with mount has whole line advantages:

• it cannot be accidentally thrown onto the floor;
• the base takes up virtually no space on the table;
• the lamp does not lose mobility.

Shade

Modern lampshades for table lamps are extremely simple and, at the same time, elegant and functional. They can be:

• made of metal;
• made of plastic;
• from glass.

The choice of material depends on what the table itself is made of:

• The metal lamp fits on any surface.
• Above a tabletop trimmed with plastic, a lampshade made of the same material will look better.
• But glass and opaque plastic do not combine very well - such a lamp will decorate a wooden or steel surface.

Setting up a desktop

Before attaching a table lamp to the table, it makes sense to think about what workplace It is intended, first of all, to be worked on. That is, decorative elements play a secondary role. That's why:

• Preference should be given to a laconic and practical model - preferably with a wide lampshade that will provide illumination to a large surface of the tabletop. At the same time, the device itself should not be large.
• Please note the manufacturer:
  1. Excellent table lamps are produced by the German company Brilliant. They are comfortable, easy to attach, easy to remove and are relatively inexpensive.
  2. The Austrian company Globo has also long been known on the international market. Lamps of this brand can be either with a tripod or with a flexible tube. They are miniature and can operate on both incandescent and LED lamps.
  3. Many users praise the products of the Polish company Lussole - lighting fixtures on tripods with a wide lampshade. The lamps are reliable, comfortable and look very stylish, and they are quite cheap compared to their Western European counterparts.

Mounting the lamp

In order to attach the lamp to clamps, you do not need any additional devices or tools. Everything is included in the package. You can install it:

• on the edge of the tabletop;
• on a bookshelf if it hangs above the table.

U quality models Clamps from reputable manufacturers are made of good durable metal that can withstand high pressure, so you don’t have to worry about them falling apart under strong pressure.

Important! On sale you can also find Chinese fakes, which are not always made of high-quality materials: if you come across a lamp from an unknown manufacturer, attach it carefully.

What does it consist of?

Any lamp that is attached to a table has several elements:

• the lamp itself;
• the basis;
• tripod made of two parts with a hinge;
• clamp.

In turn, the clamp also consists of several parts - it is assembled in the package. It includes:

• plate;
• clamp;
• a screw or lever that adjusts the clamping of the tripod to the tabletop.

Important! Before installing the lamp, read the instructions - the procedure is simple, but you need to know all the details.

Installation

So, you bought a lamp, looked at what it consists of, and read the instructions. Next, the procedure for attaching the lamp to the table will be as follows:

1. Choose a place on the countertop - you don't need to make any notes.
2. Place the purchased lamp in this place.
3. If the clamp plate and screw are tightly together, move them apart.
4. Place the clamp so that the edge of the tabletop is between the plate and the screw.
5. Once the base is in the desired position, carefully tighten the screw clockwise.
6. Turn the screw until the base is rigid.

Important! Do not use much force when turning the screw, otherwise you may break either the clamp or the tabletop.

How to hang a lamp correctly and with your own hands so that there is good lighting, which, in turn, will create coziness and comfort in your home?

If you follow safety rules, you can hang the lamp on the ceiling or wall yourself, without calling an electrician.

To install the wall light you will need the following:

• lamp;
• switch;
• a piece of cable;
• pliers or pliers;
• drill or hammer drill;
• tester;
• dowels;
• screws;
• hammer;
• screwdriver.

The lamp is attached directly to the wall with the back side

Before hanging the lamp on the wall, determine the location on the wall by marking it with a pencil.

Important!

Before installing the lamp, turn off the power supply to the house. Using a tester (voltage indicator), we check the exposed ends of the wires to which the lamp is attached.

We drill marks on the wall with a drill or hammer drill.

Sconce - a lamp distant from the wall

We hammer dowels into the hole, and then use screws to attach a lampshade with a metal plate (fittings) and a bracket to them, that is, everything that is included in the wall lamp kit.

Turn on the electricity and check the wires coming out of the wall with a voltage indicator. Which wire is with phase and which is neutral. This must be done in order to properly install the lamp into the wall.

Tip: in order not to forget which wire is which, you can cover them with pieces of electrical tape of different colors.

Then you need to connect the wires that come out of the wall with the wires of the lamp. The tester will help you determine which phase wire to connect the lamp socket to.

The main installation process is complete. Now you can hang directly the lamp itself and the light bulb.

Installation of the lamp is completed

In the same way, you can hang a lamp and sconce above the sofa in the living room, above the table or in the kitchen.

How to hang a lamp on a plasterboard wall

A wall lamp is attached to a plasterboard wall in almost the same way. There are just some nuances, which will be discussed below:

1. To attach the lamp to a plasterboard wall, use special spring dowels with screws or hooks. They are also called "umbrella". Never use nails, since the dowels curl into a knot in the wall and do not fall into the drilled hole, and nails will only damage it.
2. In addition to dowels, special screws are required. They should be the following size depending on the length of the dowel + the thickness of the mounted elements of the lamp + 10 mm.

lamp suspended from a plasterboard wall

How to hang a lamp on the ceiling

Ceiling lamps come in three types: surface-mounted, pendant and recessed and have different options for attaching to the ceiling.

Hanging with a hook

For a long time this was the only way to hang a lamp, since recessed lamps had not yet been invented. In the very center of the room there was a hole in the ceiling from which wires hung and a metal hook installed in the ceiling. A lighting fixture was hung from a metal hook.

And today this option for installing a ceiling lamp is relevant. After connecting the wires coming out of the ceiling with the wires of the device, the hole and hook are covered with a decorative element of the lamp.

If there is no hook, install it yourself. To do this you need the following:

1. Drill a hole in the ceiling with a drill or hammer drill near the power cable outlet.
2. Drive a plastic dowel into the drilled hole.
3. Screw the hook into the dowel. The last one must be threaded!

Before assembling the ceiling light and hanging it, wrap the hook itself several times with electrical tape, or put a plastic tube on it. This is necessary so that the hook does not come into contact with the metal parts of the lamp.

Hook for hanging the lamp from the ceiling

Hanging with a cross or bar

In most cases, lamps are suspended from the ceiling using a cross or strip.

Pendant lights are built into the wall. It is better to hang suspended lamps on drywall.

The ceiling fixture is mounted as follows:

1. The crosspiece or plank is applied to the ceiling at the marks.
2. Then, using a puncher or drill, holes are made along these marks.
3. The plank or cross is attached to the ceiling with screws in dowels.
4. Before hanging the lamp itself, it is turned on electrical network, after connecting the wires.
5. The ceiling light is placed on the built-in bolts of the strip and then secured with nuts. The wires and the bar or cross are covered by the base of the lighting fixture.

Hanging a lighting fixture using a cross

Hanging a recessed light

IN Lately recessed (spot) lights have become popular. Such devices provide little light, but the number of points can be any and they can be located in different places on the ceiling.

Important! For 1 sq. m. of the room there should be one spotlight with a power of less than 20 W.

How the recessed luminaires will be located is decided before installation begins. suspended ceiling. Wires are attached to the attachment points. If you have a suspended ceiling, then rings are attached at the established points, to which the lamps themselves will then be attached.

Use a drill to drill round holes on the marks. They should be slightly smaller than decorative external element lamp

Attach the lamp clamps to the wires and turn on the light. It should burn.

After removing the spring latches, hang the ceiling light.

Important!

If you have a plasterboard ceiling, then make holes in advance, before puttying and finishing work.

With a suspended ceiling, the algorithm is the same, only the holes are not made with a drill, but cut with a knife in the inside of a special glued heat-resistant ring.

Illumination of stretch ceilings with lamps

So, it’s not difficult to hang the lamp on the ceiling yourself. But, if you are not confident in your abilities, call a professional. How much does it cost to hang a lamp on a wall or ceiling? The price is reasonable - from 300 to 1 thousand rubles.

The cost depends on the complete or partial installation of the lamp. Partial installation is only connecting the device wires to the network. The cost also depends on the type of ceiling and the lighting device itself.

Proper lighting plays a huge role in the interior of any room. This is especially true for the work area. Good lighting is important for vision, as the eyes are less tired when working. An excellent choice is a table lamp with a mount.

Modern manufacturers offer a wide range of stylish and attractive models that not only provide excellent lighting, but also help decorate the interior.

Peculiarities

Mounted table lamps are a type of lighting fixture. They are distinguished by practical functions and also act as interior decoration. The design of the model for tabletop use is the same as that of the classic lamp.

It includes several main elements:

• reliable support;
• flexible column;
• strong body;
• safety power cord;
• pleasant light source (artificial).

Essential elements

The base or support of the device is represented as a clamp. With its help, the device is attached to the table surface. This support secures the lamp. It consists of a fixed frame and a clamp. If the table has a thickness of no more than six centimeters, then the lamp is securely attached to the base of the product using a clamp.

Some lamp options are equipped with a clothespin-style support. This option is characterized by mobility, since it can even be used for wall mounting.

The base and body are connected to each other thanks to the presence of a column, which is presented in the form of a flexible leg. It allows you to direct the light to the right place. The direction of lighting is determined by the socket, which can be made of plastic, metal or glass. The choice of color scheme is a completely individual decision.

The lighting source can be incandescent, LED or fluorescent lamps. Energy-saving light bulbs are extremely popular because they have a long service life, save electricity, and also meet modern standards.

Table-mounted lamps are almost always equipped with a switch, which can be located on the power cord or the product support.

Advantages and disadvantages

Table lamps with mounts have many advantages. Their main advantage is that the user can independently adjust the direction of the light using a flexible column. The design is characterized by lightness and static fastening. The lamp will not fall off the table and you don’t have to worry about the possibility of it tipping over.

The advantages of the desktop model include saving space at the desktop. The lamp can be attached to the wall or on the table. The support of modern models takes up very little space. For each lamp you can choose a light bulb of the required power.

A variety of models allows you to decorate the interior in any style. At correct use such a device will last for many years.

But besides the advantages, table lamps also have some weaknesses:

• The power cord is almost impossible to disguise.
• Installing a lamp on a wall using a bracket requires skill and skill.
• If the lamp is made of metal, then it is heavy.
• Glass options are characterized by fragility.

A table lamp with a mount is designed to provide good illumination of the work area. Modern manufacturers create wonderful models, which are presented in various designs, decorated in different styles and are made in various colors.

Voltage and power

Before connecting the lamp to the network, you should carefully study the markings. Most models operate from a 220 V outlet. Rarely are there options marked 110 or 127 V. In this case, it is necessary to use an additional transformer.

Lamps for tabletop mounting can be equipped with fluorescent, LED or incandescent lamps. Optimal choice is a lamp with a power of 60 W, because this device provides spot illumination.

Types of fasteners

1. Lamps for tabletop use can be attached to the surface in different ways. Many models have a clamp, which allows you to firmly and securely fix the product on the table.
2. For children's rooms, lamps with a fastening that resembles a clothespin are often purchased, since even children can handle it. But this option is unreliable; such a lamp can be easily moved from its place.
3. Models with a suction cup mount are becoming increasingly rare. This type of mounting can support light-weight lamps. This option can be used for decoration.
4. If there is no free space on the table to place a table lamp, then you should pay attention to models with brackets. This option can be hung on the wall, although the mounting process requires effort and skill. You will definitely need a drill, dowels and a building level.

Frame

Floor lamps for table lamp models are made from various materials and are also available in a wide range of colors.

• A metal lamp is characterized by long term operation, but is very heavy.
• Many buyers are attracted to plastic models because they are inexpensive, lightweight, and come in a wide range of colors.
• If we talk about glass floor lamps, they attract attention with their elegance, but are fragile. These options are not worth buying for a children's room.
• Textile lamps look beautiful and stylish when combined with a metal body.

How to choose?

You need to take the choice of a lamp for your desk seriously, since both the result of your work and your health depend on it:

• Before choosing a lamp, you need to decide where it will be located. If the lamp will be on the table, then you can choose a model with a clothespin, clamp or suction cup. For wall mounting, only the bracket version is suitable.
• The lamp should be no higher than half a meter from the working surface. It is better to mount the lamp on the right, but above the monitor. The power cord should not be stretched, nor should it hang down, so it is better to measure the length from the table to the outlet before purchasing the device.
• The power of the lamp directly depends on the dimensions of the desktop. Typically, lamps with a power of 60 to 100 W are purchased. High power incandescent lamps can damage the floor lamp when heated, so you need to be careful.
• When choosing a shape, it is better to give preference to models in the form of a cone or sphere. The light bulb should not extend beyond the floor lamp, so the light will be diffused, will not tire the eyes and will not cause fatigue to the body as a whole. Among the color solutions, the best option is white and light green.
• A table lamp must be of high quality. To check this parameter, you should take a closer look at the cartridge. Its stability is an indicator good quality.

Instructions

First, pay attention to the shape of the lamp shade. The ideal option is a trapezoid shape; it provides the most comfortable lighting for the eyes. At the same time, remember that too bright a lamp color will distract the student from completing assignments, so your choice should be a lamp of calm tones. The best option – green color, it will have a beneficial effect on the child’s vision.

Check the material from which it is made. If the lampshade is made of plastic, then inspect its inside: the lamp should under no circumstances be adjacent to the walls of the lampshade. Otherwise, after some time it will begin to melt, which can lead to a fire. Metal also has its own: it is fast and can burn a child if he needs to turn it.

When purchasing a lamp, pay as much attention as possible to the light source. After all, it is he who has the main influence on the student’s vision. Today fluorescent lamps have practically replaced the usual lamps; they consume much less energy and do not heat up. However, such lamps do not provide enough light. Choose a lamp that will provide soft light. Remember that it must be hidden by a lampshade, otherwise the bright light will blind the child.

The lamp leg must be fully movable or rotate in three directions on hinges. This lamp can be installed outside the work area, which will save space on your desk. In addition, you can independently select the required height and inclination, and position it in a way that is convenient for you. Lamps with screw mounts are especially practical; they do not take up much space, are mounted on almost any surface and can rotate in any direction.

Video on the topic

Helpful advice

The light regulator will allow the child to use the lamp not only for work, but also as a night light.

Sources:

• Tips for choosing a table lamp

With the beginning of the school year, close attention must be paid to the organization of the student’s workplace, in particular, lighting. A lot depends on the table lamp: the effectiveness of the work, the child’s well-being after completion, etc. With a correctly selected and installed desk lamp, you can expect good results from your child when completing his homework. This is explained by the fact that the eyes do not get tired in the right lighting, which means that the child does not get overtired.

Instructions

Lamp shade The shape and color of the lamp shade are very practical. Lamps with a cone-shaped shade are preferable. This lampshade has a narrow base and wide edges, so there will be maximum illumination. The color of the lampshade should not be very bright, because... bright ones will distract the child’s attention from work. The best color for the lampshade is green. Green shades do not distract attention and allow the eye muscles to rest. Calm pastel colors are also good. The material from which the lampshade is made is also important. Plastic lampshades are good, but if the quality of the plastic is low, they can begin to melt when the light bulb is on for a long time. This creates a risk of fire. It is necessary to choose lamps made of hard, fairly thick plastic. Metal is often used to make lamp shades. It is fireproof and durable. But it has a drawback - it gets hot, so your child may get burned when he tries to adjust the lamp.

Lamp tripod A lamp that has a flexible leg with a rigid attachment to the table is especially suitable. In this case, the lamp’s leg can be completely flexible or rotate on hinges in three planes. Fixing the lamp outside the working area allows you to significantly increase the working space of the table. Rigid mounting prevents the lamp from falling. Using the flexible lamp leg, you can illuminate any part of the table without moving the lamp. It is desirable that the lampshade is not transparent. It will direct the flow of light onto the table and not blind the child’s eyes. To ensure that the light from the light bulb is slightly diffused, the lampshade must have a reflector.

Light Bulb It is best to use a simple incandescent lamp with a matte finish in a table lamp. This allows you to use a dimmer (rheostat) in the lamp, which can regulate the power of the light source. This makes it possible to achieve the most correct and comfortable illumination of the table. With fluorescent energy-saving light bulbs, the use of dimmers is not possible.

Video on the topic

Sources:

• how to choose a lamp for a schoolchild

The table lamp is an indispensable assistant in the office, in the place where the children do their homework, in the bedroom. An original table lamp can create a cozy atmosphere for a romantic dinner. How to choose table lamps of good quality and at an affordable price?

Types of table lamps

According to their functional purpose, table lamps can be either working or decorative. Before you buy a table lamp, you need to evaluate its parameters and safety. Doctors advise paying attention not so much to appearance, how much on the direction of the light flux and the power of the device. Modern lamps differ in the material of the lampshade, shape, and type of lighting. It is worth highlighting wireless table lamps separately.

Today, wireless lamps that are recharged from batteries or solar panels. The products have such qualities as energy and environmental safety.

Advantages of wireless LED lamps

In order for the wireless lamp to work, it must be equipped with batteries. Such a lamp can be installed in the toilet room, basement, wardrobe and other places where there is no conventional lighting.
Compared to other lighting devices, a wireless lamp is distinguished by:
- huge energy savings
- mobility and compactness, the lamp can be easily removed from the holder and used as a flashlight
- easy installation and installation of the device
- wireless lamps do not break even when dropped
- working for full power, the lamps do not heat up.

The benefits of using a wireless lamp have long been appreciated by cafe and restaurant owners. Comfortable lighting is the key to a pleasant pastime and creating an intimate atmosphere.

Criteria for choosing wireless table lamps

When choosing lamps, you should pay attention to the components of the product. When manufacturing wireless options, high-quality LEDs of the SOV class should be used. It is known that neutral light in the white spectrum is comfortable for the eyes. Therefore, it is very important that the lamp provides constant warm light. You should also pay attention to the operating time of the lamp. A high-quality device can operate at full power for up to 12 hours per day. offline mode. The next indicator is the charging time. Thanks to special batteries, the devices do not require much time to recharge. A very important parameter when choosing a wireless table lamp is reliability and fire safety. Lamps must have several degrees of protection electrical circuits. Manufacturers of wireless lamps use environmentally friendly materials in the manufacturing process of devices: wood, brass, natural fabrics.

Video on the topic