Audio transmitter Bluetooth A2DP from ET. Bluetooth B5 Stereo Audio Transmitter Bluetooth 3.0 USB Audio TRANSMITTER

Hello everyone.

Today's review will be devoted to the next audio transmitter Bluetooth A2DP. Unfortunately, the announcement for which I bought it on this moment Not available, so the reference indicated above leads to another seller. But if I gave a little more than $ 8 for him, then the link for the receiver is asked only $ 6.77, which pleases in itself.

This is not my first attempt by modest investments to remake the usual wired headphones In a device running on Bluetooth technology. And if the first receiver arranged me completely until he died, then I didn't like the second at once. Therefore, the third attempt was made about which you can learn from this review.

So, the receiver is supplied without any original packaging. Personally, he got into his hands in the usual polyethylene bag on the clasp.

In the delivery kit, the receiver itself was, a small black and white instruction, a metal bilateral connector 3.5 mm, as well as two cables (two-way audio 3.5 mm cable and a USB-microUSB cable for charging). By the way, if you believe the instructions, then this is the TS-BT35A18 receiver.


Before moving to the direct review of the receiver, will introduce you to its characteristics:

• Bluetooth v2.1 + EDR, class 2.
• Bluetooth Profiles: A2DP & AVRCP.
• Radius of action: up to 10 meters.
• Opening hours: up to 10 hours.
• Charging time: 1.5 hours.
• Size: 50 x 25.5 x 11 mm.
• Battery: lithium.

The transmitter housing is made of black matte plastic, so that the fingerprints remain on it, which is very good. There is no other smell. Halves of the body are securely interconnected with the help of latches (during the opening of the case, it is necessary to be extremely neat, I broke 2 out of 4 latches). Scrip, backlash, gaps and other unpleasant trifles were found not.

The design of the TS-BT35A18 receiver is almost no different from the design. similar devices Except for the volume control buttons located on one of the side faces. On the front side of the device there is a basic button on / off, an answer to incoming call, perform a reproducing file pause, as well as removal from the pause.


The button is made of black translucent plastic and closes two LEDs: blue and red. Blue diode slowly flashes while the receiver is connected to the sound source, red and blue alternately blink during the activation of the device pairing mode, and the red is constantly lit during charging.


As I wrote above, the volume control buttons are located on one of the side faces, on the opposite - 3.5 mm connector for connecting the headphone / cable, on the third - microUSB connector for connecting the cable, and on the fourth - a hole for which the microphone is hiding.


In principle, nothing more interesting in appearance There are no devices. So you can look at how it is arranged.


Behind the board is hidden by the battery without any identification signs.

Now about the most interesting thing about the quality of work. With the connection of the receiver, it did not occur to the sound source, everything was conflicted from the first attempt. As a Bluetooth receiver, this device has shown exclusively on the good side. The sound transmitted from the TV to the headphones was clean, with well tangible low frequencies. But it was when using the receiver with large headphones XIBERIA V5, but after connecting "Zatchek" Xiaomi Piston. Everything became not so rainbow. The main problem is an insufficient volume level, high and low frequencies Not anywhere disappeared, but they became not as pronounced ... The sake of the sake tried to use the receiver as a hand free headset - when I spoke to the microphone, holding a box in 20 centimeters from the mouth, then the interlocutor did not complain about the sound quality. But if you put the box in place from myself, then claims of bad hearing and distortion of the voice begins from the interlocutors. As for Time autonomous work - For 10 hours it is clearly not enough, but two films (about 3.5 hours) respected the receiver without problems and did not even have time to discharge to the end. During the viewing it was necessary to move around the apartment - when moving around the room in which there was no sound stocks, but when I was from the receiver through the reinforced concrete wall, then the sound began to "slow down", stutter, but this trouble is all devices running through Bluetooth.

Summing up everything that was written, I can say that this receiver is much better than my previous option. It can be used to transmit sound via Bluetooth technology and if at this time it is used good headphones, the quality reduction is not noticeable. It is possible to listen to music music-gourmets, he will not be born, but for my purposes - watching TV more than. So personally, I remained buying satisfied with 100% and I hope that he will serve me longer than the very first instance :)

On this, perhaps, everything. Thank you for your attention and spent time.

it electronic device I will help you out if you want to use wireless bluetooth headphones, while the sound source will not have a Bluetooth, only an audio output. Did you think about such a device for a long time? Now all the amenities that Bluetooth gives will be from any of your device with standard audio output! Buy Bluetooth Audio Adapter You can in our online store with a discount and delivery.

Additional technical characteristics

• Chip - ASR8670.
• Supported Standards - A2DP, AVRCP, HFP
• Food - USB 5V / 0.5A
• Working current - about 100 mA

Does not install any drivers when connected to a computer or laptop.

What is a Bluetooth audio adapter and why is it needed?

Almost probably you have wireless headphones working on the canal wireless communication Bluetooth. If not - be sure to purchase them, such devices are sold in our online store. They are very comfortable, many models are very light, miniature, practically not noticeable. By Bluetooth can be transferred to the headphones audio sound in excellent stereo quality, the devices are very economical and can work from one charging for many hours.

But the trouble is to listen to music on Bluetooth headphones only from devices that the Bluetooth module has a transmitter. These are usually smartphones, tablets, modern laptops. And if you want to watch movies from a TV or projector? Modern TV models are equipped Bluetooth moduleBut almost everything that has been released 5 years ago does not have it.

And then you will come to the aid to Bluetooth Audio Adapter! Everything is simple - connect it to a 3.5 mm cable to the audio output of the TV or computer, insert the transmitter itself in USB port - this is to power the device, uSB ports And they are always the audio next to the TV.

That's all! Turn your convenient wireless Bluetooth Headphones and with the help of our audio adapter, see the video does not interfere with anyone!

Hello everyone.

In today's review it will be about another Bluetooth Receiver capable of turning ordinary headphones in wireless.

The exserved model has the following characteristics:

Bluetooth v2.1 + EDR, class 2.
Bluetooth Profiles: A2DP & AVRCP.
Radius of action: up to 10 meters.
Opening hours: up to 8 hours.
Size: 50 x 25.5 x 11 mm.
Battery: lithium.

A receiver came in a conventional plastic package, which, it seems to me, is the original factory packaging.


Completed supplies were found:
1 x Bluetooth adapter.
1 x 3.5 mm connector.
1 x mini USB cable.


The receiver itself, and if more accurate, then its body, made of black matte plastic. Externally, it differs little from homogeneous products and looks like a black rectangle.


The receiver controls are as standard. On its face, there is a button on / off button, it is the activation button of the pairing mode, it is the pause button / resume playback of the track.


The button has a two-color backlight. Blue light informs that the receiver is connected to a sound source, red lit during charging. During the work of the pairing regimen, she blink alternately.


On sidelights are located: 3.5mm connector for connecting headphones, microUSB connector for power connection, microphone, as well as the volume control buttons, which is found not in each model.


Halves of hulls are kept on latches, so you can easily get to the device stuffing:


The battery does not have labeling, but through the USB tester it was found that the container corresponds to the stated:


Now about how the receiver works. Immediately I will say that it works in the same way as its counterparts. If you use it in a bundle with headphones, then the sound is very quiet and you have to listen. If you use good big headphones, then things become much better. In the bundle with XIBERIA V5 - on the maximum volume is very loud. Using the receiver in a bundle with an amplifier gives the best result. As for the quality of the sound, I did not notice the distortion of sound. Without stinking room, everything works as it should. If you get into the corridor with the receiver, then problems immediately begin - interference, brakes and so on. The batteries are enough for watching two films on the maximum volume (4 hours of continuous playback). So as a whole, this is a good receiver with the ability to adjust the sound, which can save you from extra and unnecessary wires. It can also be used as a "transmitter" in the car, provided that there is aux connector. In general, the device is not bad, but any favorable differences (again, except the volume buttons) from the competitors, I did not notice ...

On this, perhaps, everything. Thank you for your attention and spent time.

The goods are provided for writing a survey shop. The review is published in accordance with paragraph 18 of the site rules.