Samsung galaxy s3 duos update to 5.0. Android OS update on Samsung phone. How to get rid of the pirated version

However a new version Not all users have received the firmware, since different operator firmware versions may vary in delivery time, while other users’ smartphones may not see the new firmware on their own. In this regard, I wrote a small instruction on Galaxy update S III to Android 4.3 manually.

So, first we need it itself, you can download it on our website. For devices purchased legally in Russia, it is best to install the version for the home market, but there is no such version yet, so I decided to install the British version. It is not much different and also contains Russian, like any other European version. In the future, it will be possible to reinstall the firmware again using the method described below and this will not lead to loss of the official warranty for the smartphone. I also recommend reading the article to the end in order to avoid future discomfort that will inevitably overtake you after the update.

The procedure for installing the firmware is as follows:


  1. run the program on your PC and make sure your smartphone has enough charge;
  2. enter the smartphone into Download Mode (while simultaneously pressing the “off” + “volume down” + “home button”) keys, then press “Volume up”;
  3. connect a USB cable to the device;
  4. in the Odin application on your computer, select files from the archive with the firmware:
    • for the column PIT - a file with the extension *.pit;
    • for PDA - a file whose name contains the word CODE, if there is none, then you should know that this is the heaviest file in the archive;
    • for CSC - a file whose name contains the word CSC;
    • for Phone - a file containing MODEM in the name;
    • Note. If the files for the CSC, Phone and PIT columns are not in the archive with the firmware, then we sew exclusively using the one-file method, i.e. indicate the location of the firmware in the PDA column, and leave the remaining lines empty.
  5. Make sure that the “Auto Reboot” and “F.” checkboxes are checked in Odin. Reset Time". If the location of the *.pit file was specified, then the “Re-Partition” checkbox will be checked automatically;
  6. Press the “Start” button and watch how the firmware process occurs. The phone may reboot several times during installation and in no case should you disconnect the cable from it until the message “All threads completed” appears in the Odin log or the green information window with the inscription “PASS!” lights up.

On average the process Galaxy firmware S3 takes about 6 minutes, but can take longer. In any case, you should wait for the message about the completion of the firmware installation, because premature interruption of the process can turn the phone into a “brick”. Once Odin informs you that the firmware has been installed successfully ("PASS!" message in the Odin application), you can proceed with the installation itself. operating system.

Difficulties in Android installation 4.3 no, the system is intuitive and invites the user to check the necessary boxes, and even if you miss any points, you can always make changes in the smartphone settings. Now the phone is fully flashed and ready to use.

Android 4.3 is quite different from previous version(Android 4.1.2), but we still have the same Jelly Bean, so it won’t take long to get used to the innovations. First of all, what catches your eye is the updated interface that the Galaxy S3 inherited from its . In addition, the standard Samsung keyboard and the S Voice service, new screen and camera modes appeared, and they were accompanied by a redesigned notification center and settings section. One more Android feature 4.3 now supports TRIM (now the device should become faster), ANT+, clock and full voice control.

However, on this moment Android 4.3 is not for everyone because, although official, the firmware is still crude and sometimes buggy. In particular, I noticed that unlocking now takes longer, and sometimes during this process The phone may even freeze, after which it will have to be rebooted. After asking other users about this problem, I found out that many people experience similar delays. At the same time, other users are complaining about other things. For example, when the end call button freezes.

In general, Android 4.3 can be installed for review, but at your own peril and risk. However, I would still recommend waiting official version Android 4.3 Galaxy S3 for Russia or firmware with bugs fixed. Fortunately, Samsung is already working on a solution to the identified problems.

Hello, today let me show you how to flash Samsung GT-I9300 Galaxy S3 standard firmware and rooted (or rooted?). Since the amount of information on this device is quite large, I decided that service codes, custom firmware and backup of this model I’ll tell you next time. Everyone already knows what kind of beast this is - there are a lot of reviews and reviews on the Internet.

Initially, the device was supplied with Android version 4.0.4 “Ice Cream Sandwich”, they still deliver them with this old software, but you can already update it to version 4.1.2 “Jelly Bean”, they also promise updates at the end of the year up to version 4.3 - we're still waiting. Initially, in the first versions, the device was wildly glitchy, froze, turned itself off, applications stopped working (processes were terminated urgently), lost the network and stupidly died - it turned off for no particular reason and would not turn on again - on servers they stupidly changed the boards under warranty (who was lucky) and They explained that this was a factory defect, but about a year later the situation leveled out and there were fewer such jambs, which Samsung engineers could correct.

Most main drawback Today this device has - this is its fragility - if you pressed or pinched it a little and God forbid you dropped it - a crack in the sensor is guaranteed, and this means replacing the entire display module (up to 8,000 thousand rubles for repairs in some sharashkas). So be careful. And let's get started with the firmware.

ATTENTION!!! Before starting software updates, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

Samsung GT-I9300 Galaxy S3 - software update and ROOT rights.

Before we start flashing the firmware, let's first prepare everything we need:

  • Let's fully charge the battery;
  • MicroUSB Any cable will do, but it’s better to take one from the kit;
  • Firmware, latest version - I9300XXUGOE1 ;
  • Flasher program - Odin3 v3.04 ;
  • Drivers - install kies (when updating the software, do not run this application, or better yet, go to the task manager and kill all processes called kies). But it’s better to install the drivers there and post about how to install them correctly;
  • A medium-configuration personal computer or laptop with the WIN7 SP1 operating system should be enough;
  • CF-Auto-Root-m0-m0xx-gti9300.tar - firmware file for rooting.

First do backup copy all data or use the KIES program to save all necessary files on computer. Soon there will be an article on how to backup the firmware - I’m already writing it. You can download all files at the end of the article.

Samsung GT-I9300 Galaxy S3- factory firmware.

Step 1:If you have not yet charged the battery, then it’s time to do it, insert the battery into the phone and enter the device into DOWNLOADING mode - to do this, first press and hold HOME button(central), then the volume down key and then the power button.

Step 2:Information will appear warning us about possible problems with phone when using modified firmware. And it offers to either continue or restart the smartphone. Continue pressing the volume up key. A green android robot should appear. We are on the right track.

Step 3:Download the archive with the firmware and flash driver and launch the application Odin3_v3.04.exe.

Step 4:The main window of the flashing program appeared in front of us Odin3 v3.04.

Step 5:And so, the smartphone is entered into download mode, the battery is charged, important information saved, drivers installed (do not forget to “kill” all Kies processes if you installed it). We connect the cable to the phone - the com port should be detected and a line with the word Added will appear - this is a good sign, it means that the device has been detected by the PC.

Step 6:Now it’s time to configure ONE - selecting firmware files:

PIT -mx.pit

Bootloader - BOOTLOADER

PDA - CODE _I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5

PHONE - MODEM _I9300XXEMG4_REV02_REV04_CL1360150.tar.md5

C.S.C. - C.S.C. _OXE_I9300OXEEMH1_CL1359224_REV00_user_low_ship.tar.md5

BE CAREFUL - CHECK SEVERAL TIMES!!!

If everything is fine, press the START button.

Step 8:"PASS"- in about five minutes the device will be flashed. All, Samsung GT-I9300 Galaxy S3 ready to use. You latest version firmware.

Step 9:Reboot and check the software version by typing the following code on your phone keypad *#1234# .

Obtaining ROOT rights.

If you still decide to root your Samsung GT-I9300 Galaxy S3, it means you are aware of what you are doing and take full responsibility upon yourself. And so let's get started:

Step 1:Download CF-Auto-Root-m0-m0xx-gti9300.tar - This is a rootkit, so you will need to disable your ANTI-VIRUS, unzip this archive. The final file must have a .tar or .tar.md5 extension.

Step 2:We switch the device to DOWNLOADING mode - see the instructions above.

Step 3:Let's launch application Odin3 v3.04.exe.

Step 4:Select the rootkit file and put it in the field PDA. If you have version androida 4.1.x, then be sure to uncheck Auto-reboot.

Step 5:We connect the phone with a cable to the computer and press the Start button. In a minute, the device will flash, and since we unchecked Auto-reboot- turn off the device manually and enter it into recovery mode by holding the volume up button in turn, then the HOME button and the power button. Root rights are automatically installed.

Share:

Install optional products - DriverDoc (Solvusoft) | | | |


This page contains installation information latest downloads drivers Samsung Galaxy S3 using Samsung Driver Update Tool.

Samsung Galaxy S3 drivers are small programs that enable your hardware Mobile phone interact with operating system software. Keeping your Samsung Galaxy S3 software updated prevents crashes and maximizes hardware and system performance. Using outdated or corrupt Samsung Galaxy S3 drivers may cause system errors, failures and failure of equipment or computer. Moreover, installing the wrong Samsung drivers can make these problems worse.

Advice: if you don't know how to update drivers Samsung devices manually, we recommend downloading utility program for Samsung Galaxy S3 drivers. This tool will automatically download and update the correct versions of Samsung Galaxy S3 drivers, preventing you from installing the wrong Galaxy S3 drivers.


About the author: Jay Geater is President and Chief Executive Officer of Solvusoft Corporation, a global software company focused on innovative service offerings. He has a lifelong passion for computers and loves everything related to computers, software and new technology.

Do you want to update your Galaxy smartphone S3 to latest version operating room Android systems 7.1? In this article you will find several versions of custom firmware based on Android 7.1 Nougat. New firmware promises amazing features, including CM14.1, as well as additional security patches.

Developers and users who have already updated the Galaxy S3 to Android 7.1 report that the smartphone is fast and stable. However, it is worth remembering that the firmware is under development, so some functions may not work correctly.

On the official website of Android 7.1 Nougat firmware for Galaxy S3 you can read about new features and updates.

At the time of writing this article, the most Last update Android 7.1 Nougat firmware for Galaxy S3 has been released January 23, 2017.

Preparation

  • Create a backup Galaxy data S3 because inner memory The smartphone will be completely cleaned.
  • Enable USB debugging. Read how to do this.
  • Galaxy S3 must have Root rights, unlocked and use TWRP recovery mode.
  • The smartphone must be charged at least 60%.

Note: this instruction designed to update Samsung Galaxy S3 I9300. If you have a different model of smartphone, do not try to update it using this guide, otherwise problems may arise.

How to update Galaxy S3 to Android 7.1 Nougat

Required files: Download AICP Android 7.1 firmware for Galaxy S3 and save it on your computer. Also download GAPPS, but do not extract the contents of the archive.

  1. Connect your Galaxy S3 to your computer with via USB cable.
  2. Copy zip file firmware to the SD memory card.
  3. Disconnect USB cable and turn off the power of the Galaxy S3.
  4. Boot your smartphone into recovery mode. You can do this by holding down three keys at the same time: Volume Up + Home + Power.
  5. Execute backup current firmware: go to Backup > Backup and restore.
  6. Perform a hard reset: select data/factory reset. Then select wipe cache partition and wipe dalvic cache.
  7. Next, select the menu item choose zip from sdcard, then go to the section where the previously downloaded file was saved Android firmware 7.1 for Galaxy S3. Confirm the firmware process.
  8. Return to the main recovery menu and reboot your Galaxy S3.

How to returnthe samefirmwareGalaxy S3: If you want to restore the old firmware then go to recovery mode as described above, click on backup and restore, then select previous firmware from the list.

That's all! Now you know how to update your Galaxy S3 to Android 7.1 Nougat.