Error starting the application 0x00000050 Windows 7 How to fix. Loading the last successful configuration. Use the RAM inspection tool

Often when the user sees blue screen Death (BSOD) There may be an Error Stop 0x00000050 Page_fault_in_nonpaged_aRea. Usually the message also specifies the file that caused an error. If there is no such information or the user did not have time to see it, it will be possible to find it in the memory damp (if they are not disabled).

There are some basic reasons The appearance of such a failure:

  1. RAM problems. The most common cause. If a new RAM has been recently inserted into the computer, then the reason may wage in it, you should try to start the device without it. If the computer has just been bought, then you can deliver the RAM and turn on the computer until the error disappears. In this way, you can find a faulty bar.
  2. Failure of the video card. Unfortunately, you can only check it on another computer or putting on your exactly good.
  3. May arise due to motherboardHowever, such errors are extremely rare for such a reason.
  4. Failure due to poorly installed or not drivers. In the event that shortly before the error occurs, the installation was performed, you should roll back to the utility before the previous version.
  5. Also, on the contrary, update all utilities before latest versionwhich is available on the manufacturer's website. This is especially true for motherboard and video card.
  6. Perhaps user antivirus blocked Working some important driver. It should be disabled and work as usual. If there are no more errors, it is worth installing another protective software.
  7. Failure file System . Here will help the disk checkup utilities, you can use the built-in windows.

General solutions

Loading the last successful configuration

Often there are failures in the system that are not constant, but interfere with work. In some cases, when everything is guilty softwarecan help a banal reboot with subsequent kickback successful configuration .

Need to pressf8. Immediately after the download screen. This will allow you to get in the download items selection menu. It is worth choosing a section " Loading the last successful configuration" After that, the OS load will begin. If a this method It helped solve the problem, then it was a single failure of software, if not, you will have to act further.

Check hard disk for errors

As mentioned above, problems may arise due to problems with the main drive or due to damage to the file system. To check it is to use the built-in utility. Required pressWin +.R. and enter the operator in the window that appears chkdsk.<имя_диска> / f /r.. Most often the team takes cHKDSK C: / F /r.. The same command can be entered in the command prompt running with administrator rights.

Systems in the system may occur and with incorrect operation of the paging file, in which the data is also stored for quick access. It may be damaged or may cause a section of the disk on which it is recorded. To check it will be best disconnected.

To begin with, the user will have to click right-click Mice on a computer and go to its properties. Then you have to go to the additional item and select a section called " Speed" In it will meet again Additionally", There and you need to click, after that the section will open in which" Virtual memory", And then it is worth clicking on" Change».

It is worth selecting the bottom item that turns off the file. This may slow down the operation of the computer, however, the error should disappear.

Deleting temporary files

This method benefits only if the failure was caused by viruses or some of the running utilities. It is worth passing along the way C: \\ Users \\ Your_In the user \\ APPDATA \\ LOCAL \\ TEMP \\and completely clear the last directory, after which you to restart the computer.

Use the RAM inspection tool

It is also worth checking the rapid memory to the end, simple overwhelming and getting planks can be little. To do this, you can use the standard utility that is in the Administration section and is called " Memory check meansWindows».

There are many third-party utilities that can easily spend the same check if the user prefers one of them, then you can safely use it, the main thing is that it is loaded from a reliable source.

Solving specific options for the appearance of an error

Very often such an error may occur when using torrent program, especially UTorrent, who likes to be installed in autorun. Typically, the cause is a firewall that blocks the operation of the program. The user can disable it or add torrent to exceptions and open all the desired ports. You can use other clients, for example, BitTorrent, with it such problems arise less often.

If BSOD indicates Applecharger.sys.The reason may be a branded program from the manufacturer motherboards Gigabyte called ON / OFF CHARGE. It should be erased, you can do it through the board panel, after that the failure must disappear.

For seven and eight indication of files win32k.sys, hal.dll, ntfs.sys, ntoskrnl.exe Speaks about malfunctions in the paging file. It should be turned off and work without it. After that, it will be possible to activate this option again, about how it is done, it was described above.

When specifying files tCPIP.SYS, TM.SYS. It is necessary to start updating the drivers network card And Wi Fi. Typically, these data speaks about a network bridge failure, so that it should be checked to press Win + R and enter ncpa.cp.l.. In the list that opens is worth searching for network bridges. If they are and not needed to the user, then they must be removed.

When specifying on atikmdag.sys, failure can be called ati Radeon Driver. Sometimes it happens when the device is output from sleep mode. If so, it will be necessary to disable quick start mode. If not, you should delete the driver and download it from the manufacturer's website.

If it is assumed that the error is caused by another driver, you can use the site http://www.resplendence.com/whocrashed, to which you can download a memory dump. It will analyze and indicate the user to the device that caused failure. After that, it can be found in device Manager And remove it. After that, it remains to download the latest version of the program from the developer's website and install it.

If you fail during installation, you can first try clean system installation From another drive, if it does not help, then get the RAM from the device. At the same time it must be disabled. After that, you can insert the bar on one until an error appears. This will help identify defective hardware.

Everyone loves to spend time behind the monitor screen of your PC, but no one loves when some problems arise. A special disorder, according to statistics, people calls the error code 0x00000050 - the blue screen of death, if we speak simple.

What options are there in solving the problem STOP 0x00000050? The first, and probably the easiest, lies in the call of a specialist who will save the favorite PC from an impartial picture with an incomprehensible for many "0x00000050 Page FAULT IN NONPAGED AREA". Nevertheless, even in this method there are drawbacks:

  • It takes time to arrive a wizard to troubleshoot 0x00000050 Windows XP or Windows 7.
  • Naturally, you have to pay.

The second method allows to avoid substantial financial costs, as it implies an independent correction of trouble, which is indicated as the error code 0x00000050 - the blue screen of death.

So, the work plan is:

  • Determine what causes the appearance of STOP 0x00000050.
  • Self cope with the task.

What can lead to this problem

The error code indicates that the conflict between installed equipment and other components personal computer.

In addition, such a variant of events can set the installation of any software product or not matching system drivers. For example, the inscription 0x00000050 Windows 7 Win32K SYS is able to manifest after trying to install the antivirus program from Kaspersky and so on.

But it is not necessary to worry and tear your hair ahead of time - in your opportunities to fully correct the situation!

Control procedure

By the way, the material will be useful not only to the owners of seven, but also users more outdated version XP, since on these systems the solution to this problem is fully the same. Therefore, the answer to the question "How to fix 0x00000050 Win 7 x64" is similar to the results of the fight on the previous OC generation from Microsoft.

The first step in the fight against this nuisance is to check all the recently connected equipment. First of all, you need to check visually on some defects or damage. If it did not help, then it is stressed to turn off this or that device, and watch the inscription STOP 0x00000050 disappeared when the system is loaded? When a conflicting model is found, it must be removed, fix it or put another.

What to do - error codes on Windows 7 or XP have shown themselves after installing the antivirus. The simplest solution is just to disable the program.

The cause of this trouble can be the various system components. How to determine - which one causes the conflict? For this you need:

  1. Run the operating system.
  2. Press the "F8" button.
  3. Select the launch option of the last successful configuration in the menu.

In this case, the OS will start to run on step-by-step mode, constantly informing the user about the downloaded files. If the error decides to know, you can disable this process to completely remove it in safe mode.

The last thing that can lead to a similar situation is some kind of damage hard diskwho uses a person to work OS. To eliminate, you will need to download in " Safe Mode.", Call command line And to diagnose by means of the order "CHKDSK / F / R".

All these procedures usually do not occupy a lot of time and allow, in most cases, to correct the situation. Only if the solution was not found, you will need to call the master and, perhaps, payment of his work.

windowsRerror.ru.

Error Page FAULT IN NONPAGED Area Windows

What I like the computer, so it can diversify the life of a regular user at any moment by all kinds of interesting situations. For example, the appearance of a message about the error code of the Page Fault In Nonpad Area. What does this trouble be able to bring a proline of unforgettable sensations into a boring life of a person, regardless of what a series of Microsoft Operations is installed on its computer.

Its share of piquancy in the situation with, for example, the fact that the developers of this OS have decided to identify a similar message several possible problems:

  • Trouble with equipment that simply decided to play in the box or was established by some other organ, and not by hand.
  • Problems with software, for example, with all the favorite antivirus or with the system registry.

So, who is easily easily (?) - you have to look for a problem that is called the error code of the error code, based on these prompts.

By the way, OS WINTOVS is so striking with its diversity of errors that we even created a whole section of the site with which there is always the opportunity to get acquainted.

Methods for solving the first option possible reason

Immediately you should warn our readers that sometimes the occurrence of the blue screen of the Page Fault In Nonpad Area may be associated with certain financial costs, since something has been broken to change something new. Alas, but it is so ...

So, the first treatment option is very simple: if you decide to show yourself immediately after connecting to a new device, then it should be deactivated, try to connect correctly. If it does not help - it means not fate to expand the functionality of your computer in this way.

Nevertheless, let's treat that users hands are located in the right places, so this trouble occurs not because of the wrong connection any external devices. Smart people say that this problem most often arises due to problems with a graphical board or rapid memory. Especially in cases where the error takes the appearance of this phrase - Page Fault In Nonpaged Area Win32K SYS. What to do? The first option is to try to diagnose devices using the profile software. But not all so smart as Bill Gates, so it will be easier to use the physical version of the check:

  • The memory planks alternately removed from their places on the motherboard, the PC state is checked.
  • It is recommended to ask for a better friend 100% work memory and check the performance of your PC with it.

Similarly, you should proceed with the video card - most of the modern motherboards have an integrated graphics card, in which it is necessary to temporarily switch the monitor (simply rearrange the plug from place to place) so that it is possible to conduct a diagnostic procedure.

If in one of the proposed options Page Fault in Nonpacted Area Windows 8 stopped appearing, then congratulations (!), You found the cause of trouble - take money and Ida to the store, for a new spare part!

We solve the situation on the second option

Surprisingly, but often an error in Nonpacted Area Windows 10 occurs immediately after installing some kind! Clear stump you need to remove! But how to do it, if the proceeds of uninstalling prevents this not a multiplog message? "Uzzbuggy", - as one cartoon character said - there is a way out of the situation:

  1. Press the button on the PC housing that is responsible for the forced reboot command.
  2. We manage to press the "F8" magic button on time.
  3. Select the login point in safe mode.
  4. We find a nasty software, and perform its complete removal from the hard drive - so that the trace does not remain from it!

Sorry? Of course, it is a pity, because it was probably a very important program! It does not matter - you can search the network a better version or download analogue from another brilliant developer.

But let's imagine the situation that all the above reasons do not concern this trouble? Then how to fix Page Fault in Nonpacted Area?

Well, renew the reboot process with the mandatory press of "F8", select the latest successful configuration. We are waiting for the result. Run the command line, drive in it "Regeidit". We are waiting for the result. I. To drive the last nail into this problem, so that she forget the way to your computer, once again run the string and force the system to execute the command "CHKDSK / F / R".

Everything. Treatment is made, blue screen Page FAULT IN NONPAGED AREA disappeared, and you can continue to lay a favorite solitaire "Kosynka"!

helpmyos.ru.

Causes of the appearance of an error of the Page Fault In Nonpad Area and how to eliminate them

Most often, the error of the Page Fault In Nonpaged Area appears due to the defects of the computer component devices and failures in its software (drivers), as well as due to violation of the normal functioning and failover of Windows conflict. Despite the assignment of the "0x00000050" error, the "screen of death", the knowing source of its appearance is completely easy to get rid of it. Below are outlined detailed guide With specific recommendations for correcting this error type "Blue Screen" depending on the causes of its occurrence in Windows XP, 7, 8 and 10.

How to start troubleshooting?

First, it is necessary to analyze the last operations performed on the computer immediately before displaying the "blue".

Usually there are the following variations:

  1. Damage to equipment, for example, RAM or hard disks. The method of disconnecting a defective device to view the functioning of a PC with a deliberately good module.
  2. An additional component device was installed or a "virtual" component, for example, virtual disk utilities. At the same time, most likely software device functions with errors. It is recommended to update the software or turn off the new installed equipment and see how the PC will work without it.
  3. Adjustments were made to the system operation parameters. It may be necessary to roll back the OS to the previous point when she worked without failures.
  4. Updated or installed software components PC. It is recommended to roll back the drivers through the device manager.
  5. PC infection with viral applications. Be sure to implement a complete analysis of the computer for infection.
  6. Anti-virus utility conflict with PC configuration. It is required to analyze the functionality of the computer by turning off the antivirus.

Of course, it is impossible to reflect absolutely all possible scenarios of actions, but this list includes the most common.

Specific causes of errors and methods to eliminate them

Currently, the most often the reason for the appearance of the "blue screen" error Page FAULT IN NONPAGED AREA operating system Windows 10 is UTorrent, which runs along with loading windows. At the same time, turning off the antivirus utility or the firewall makes it possible to exclude the subsequent display of the screen of death. In such cases, it is recommended not to leave a computer without protection, just apply BitTorrent with which such problems do not happen.

It happens that eliminating the fault allows easy deletion of the contents of the "C: \\ Users \\ user_name \\ AppData \\ Local \\ Temp \\".

If, when you error "0x00000050" in Windows 7, 8, files are specified: ntoskrnl.exe, win32k.sys, ntfs.sys, hal.dll, then you should try to restart the PC after disabling the paging file.

With AREA in Windows 8 C TM.SYS and TCPIP.SYS, most likely the reason is the bridge between the connections. At the same time, it is necessary to hold the "Win" to click "R" and in the displayed window to print "NCPA.cpl". After clicking on "OK", a list of connections will be displayed, where it is required to analyze the presence of network bridges. It is recommended to simply remove the bridge.

In the event of a "wake-up" of a PC, often the cause is the ATI Radeon software component - "atikmdag.sys". It is recommended to disable the quick Windows start or reinstall the driver.

When the problem occurs during the installation of Windows, you must try to install the system disconnecting one RAM.

Note: Very important! All actions with removing or connecting computer components, produced with a fully disconnected PC.

If the error appears when windows update 7 either 8 to the "dozens", then it is better to produce clean OS installation.

Often, the owners of MSI are faced with the problem while upgrading to the tenth OS modification. Usually, the BIOS update allows you to eliminate the appearance of an error.

With any suspicions for the cause of the problem of the fault of the driver, it is necessary to find out what software causes failure. To do this, you can use the WHOCRASHED free disseminated application. This utility will show the name of the problem driver.

Next, through the device manager, you should roll back the driver or uninstall and put again from the manufacturer's resource of the equipment.

Also for windows users 7 will be useful to the BlueScreenView app, which can also be downloaded and installed completely free.

If the reason for RAM, it is necessary to perform its analysis using an application available to Windows. To do this, make a few steps:


Elimination of the Official Microsoft Resource

The Microsoft page has special fixes of the error under consideration. Unfortunately, they are not universal, so you need to get acquainted with the descriptions available on the resource.

For example, for Windows 8, when specifying the STORPORT.SYS file, it is recommended to use "support.microsoft.com/ru-ru/kb/2867201". If an error appears in Windows 7 with SRVnet.sys, then "support.microsoft.com/ru-ru/kb/2719594". For old good xp - "support.microsoft.com/ru-ru/kb/872797" when displaying "SYS".

Of course, on the "Microsoft" pages and detailed instructions To eliminate the causes of the screen of death and specific recommendations for action.

nastrojkin.ru.

Error 0x00000050: page_fault_in_nonpaged_area How to fix

Some of the PC users may encounter a BSOD (in a blue death screen), in the text of which indicates the error code "0x00000050: Page_fault_n_nonpaged_area". Typically, the specified error is caused by problems with loaded operation of the memory schedule of the user PC. But it also happens that the error 0x00000050 causes incorrect drivers, or conflicts in the work of the newly connected to the system system. In this article, I will tell you that for an error, what is its causes, and how to correct the problem from 0x00000050: page_fault_in_nonpaged_area on your PC.


BSOD with text error

What is 0x00000050: page_fault_in_nonpaged_area

This problem takes its beginning with the ancient Windows XP, arising in a situation where Windows OS or any program needs access to part physical memorywhich de Facto is not available.

In translation, the dysfunction text sounds like "Page Error (Memory) in Not Page Area." In most cases, the specified error 0x00000050 and the "blue screen" associated with it occurs after the recent installation of a new software or hardware component into the system.

The text of the "Blue Death Screen" may also contain a specific driver name (with the extension "SYS"), which caused the appearance of said BSOD. Errors may also occur 0x800705b4 and 0x80070002.


BSOD with a specified error on windows 10

Causes of error

Among the causes of this dysfunction, I would allocate the following:

  • Incorrect work PC memory planning;
  • Problems in the work of the drivers;
  • Malignant activity of viral programs;
  • Hardware problems in work graphic card;
  • Antivirus and firewall blocked the normal operation of some system components;
  • Damage to the hard disk file system.

How to fix the error 0x00000050: page_fault_in_nonpaged_area

To solve the problem of 0x00000050: Page_fault_in_nonpaged_area I recommend to perform the following:


You can also roll back (delete) drivers to previous versionsWhat to go to the Device Manager (type the devmgmt.msc command in the Start button search string, and press Entering), find the driver of your video card (and others mentioned by me), hover over them, right-click, And select "Run" (delete "). Then reboot your computer and watch whether the error will appear 0x00000050 again;


Dial Devmgmt.msc to enter Device Manager

  • Check the file system for errors. Run the command prompt on behalf of the administrator, and enter: chkdsk / f / r

to search and correct the errors found on the disk. If necessary, confirm the operation, restart the system, and wait for the end of the process;

  • Check your PC for virus programs. "Dr.Web Cureit!", Kaspersky Virus Removal Tool, AdwCleaner and other analogues will help;
  • Temporarily disconnect the firewall and your PC antivirus. In some cases, only complete uninstallation helped antivirus program from your computer;
  • Try temporarily disable the paging file, and see whether BSOD will occur. To do this, click on the "Start" button, enter the SYSDM.CPL command in the search bar, and press ENTER. In the window that opens, go to the "Advanced" tab, click on the "Parameters" button, there again go to the "Advanced" tab. In the "Virtual Memory" section, click on "Edit", and check the box at the "without paging file". Click on "OK", and restart the system;
  • Install one of the following updates (for windows 7.8 and Windows server 2008,2012):

For windows 7 and windows server 2008 - 2719594;

For windows 8 and windows server 2012 - 2867201;


Conclusion

Get rid of the error 0x00000050: Page_fault_in_nonpaged_area The methods listed by me above will help you. Since the causes of this dysfunction can be a lot, I recommend to try the entire set of methods described by me, which will help to eliminate the error Page_fault_in_nonpaged_area on your PC.

sdelaicomp.ru.

BSOD STOP 0x00000050: page_fault_in_nonpaged_area on Windows 7

Error 0x00000050 in Windows 7 as a rule occurs if the requested information is not found in random access memory And the system falls into the "Blue Death Screen" with the message Page_fault_in_nonpaged_area. For the first time, it appeared in Windows XP and then migrated to the seven, and later in Windows 8 and 8.1 what is the reason for the appearance of this BSOD error code and how to fix it?! Unfortunately, the source of the problem, due to which the stop code 0x00000050 appears, is most often a hardware malfunction. And in 90% of cases, these are problems with RAM.

Most often, with Windows swears on the ntfs.sys, win32k.sys files, ntoskrnl.exe, igdpmd64.sys, dxgmms1.sys or dcrypt.sys.

If you recently delivered a script bar to a computer - then it will most likely fail. If you encountered this when installing the operating system on the new, just purchased a computer, then try to remove the memory strips (the PC should be turned off) and check. Also, the reason may be the memory on the video card (video adapter). Here the diagnosis will only be in replacing the visidos on knowingly working.

Made several cases with problematic motherboardBut it is rarity.

The program reason for the occurrence of the blue screen of the death 0x00000050 may be in an incorrectly running driver. In this case, remember: did not install lately any devices. Also, you can upgrade the driver queue for the motherboard, chipset and video adapter.

If you have installed antivirus - try it off and work without it. There were cases where the service or driver of the antivirus program conflicted with others and called the Page_Fault_in_nonPaged_area error. In this case, he saved the update of the antivirus program itself to the latest version, or replacing another antivirus.

Well, the last possible reason The emergence of ERROR 0x00000050 in Windows - the file system fails. In this case, a system utility for checking the disk - CHKDSK can help. Press the Win + R key combination to start the "Run" window:

In the "Open" string, type the command:

In most cases, Windows 7 is installed on a C: \\ disc, so the team will be CHKDSK C: / F. Click the OK button and follow the execution. If a system disk is checked, then this question will be asked:

Press the "Y" key and reboot the computer. When loading will be checked system Disc For errors.

If you did not help any of the proposed breakdown options, then most likely the more thorough diagnosis of the computer will be required by specialists and you will have to carry it into the service.

An attempt is attempted to connect to system Memorywhich is unacceptable.

Causes of occurrence

As practice shows, the source of the problem should be called the installation of damaged hardware or failure in the process of their activities. It is envisaged to use operating windows systems 7, as well as XP. Such a situation may occur in the RAM defect process.

There are no cases when the start of the problem was the use of some antiviruses. Particled the product from Kaspersky company in this direction. The error occurs not when it is functioning, but during installation events. If the NTFS file system has defects, then there is a possibility of a similar failure.

Parameters

It is assumed to issue a message of the following type:

Stop: 0x00000050 (Parameter1, Parameter2, Parameter3, Parameter4) Page_Fault_in_nonpaged_aRea

Here we are interested in what exactly the four parameters indicate:

parameter1.

parameter2.

With value 0, the read operation is provided, 1 - records

parameter3.

Specifies the address where memory refers to

parameter4.

The parameter is reserved

Capable solutions

It is envisaged quite a large number of moments that can be implemented on the way to correct error:

  • When the addition of some hardware to the device will be added shortly before failure, it is required to remove them. When this is done, checking whether the problem is not repeated.
  • System services are checked. It is necessary to turn off those of them that do not cause confidence. In some situations, the error will appear every time the device starts. It is necessary to restart and press F8 during the process. After that, the option is selected with the launch of the last successful configuration.
  • If the problem lies in the antivirus, it is required to disable it for a while and see, continues or fails or disappear. If the problem is in this program, updating to the latest version or installation of similar software from another developer.
  • In case of damage to NTFS, you need to run the command line and execute CHKDSK / F / R. It is used to detect errors in the system. The prerequisite is considered to conduct a preliminary restart.
  • Considerable help can be working with Event Viewer.. It is required to analyze the magazine to detect a device or driver responsible for the appearance of a failure.
  • In some cases, it helps disabling the capacity of the BIOS memory caching.

Standard solutions are not suitable in some cases. It is necessary to consider certain options for this error in order to more effectively restore the operation of the device.

Failure for Windows NT

This is most often preceded by the following situation. On a device running under Windows NT, service pack 2 (SP2) is used. When the user deletes the TCP / IP protocol and adding it to the future, the high probability of an error occurs when trying to load the device.

The system has a special service. remote access (RAS), in the configurations of which the use of TCP / IP protocol is set. Disabling leads to the appearance of a failure. There are several methods to ensure the solution of the specified problem. The easiest way is to conduct a certain sequence of actions after adding a TCP / IP protocol back:

  1. It is required to install the service pack 2 (SP2) after the addition was performed, but before rebooting the device. Thus, it is necessary to select the "no" option in the window, which is issued after adding TCP / IP protocol.
  2. Another option involves the implementation of the TCP / IP ban in the RAS configuration, with the subsequent reset of the operating system. When this is done, you need to install the service pack 2 (SP2) and resolve TCP / IP via RAS.

In the latter case, you can use different approaches. It depends on the type of file system of the existing file system. With FAT, you should load the device using another OS. This can include MS-DOS or Windows 95. The transition to the location WINNT \\ SYSTEM32 \\ DRIVERSwhere the driver is searched Tcpip.sys. It must be replaced.

In the presence of Windows NT and file nTFS systems There is a parallel installation of the operating system to another place. After that, as in the previous case, the TCPIP.SYS driver is replaced, which is in Winnt \\ System32 \\ Drivers. A reboot to the primary Windows NT and the re-mounted SP2 is performed. When this is done, the later installed system must be removed.

Failure in case of switching from Windows NT 4.0 on Windows 2000

In this case, the error will be issued directly during the update. A distinctive feature is the fact that parameter2 \u003d 0x00000001., but parameter4 \u003d 0x00000000.. This clearly talks about the type of problem. Most likely, in HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONLSET \\ SERVICES \\ TCPIP \\ PARAMETERS \\ INTERFACES \\ (Interface ID) \\ TcpallowedPorts is an overly large number of ports. Recovery of health provides for the removal of TCPallowedPorts itself or the greatest number of keys from it. When such events are made, you can safely update the system further.

Failure when working Windows 2000

When installing a PC card on a laptop under windows control 2000 Professional, there is a possibility of issuing the error of the specified type. The reason is often to use the Roxio Inc.`s Easy CD Creator program. The developer is aware of a similar problem. To no longer appear, you need to update this software. Download it follows from the company's official website.

Failure in the Sentinel.sys driver when booting Windows 2000

In this case, the error code will contain a string where the problem is specified directly in the Sentinel.sys drive. It is important to execute the following action plan:

  • In the process of implementing the first item, you need to press F8.
  • Among the proposed options, you must use a secure mode.
  • The Sentinel.sys system driver is deleted.

    • Failure during Windows XP

    A similar error occurs on this operating system of Professional versions and home. The process of occurrence is standard in all situations. Begins automatic reset Devices, after which a message is displayed on the screen and failure in the system. Certain symptoms may vary on the basis of which factors caused the cause. Should take into account the fact that uSB driver Universal Reader from the Developer Lexar Media software is not able to function in conjunction with Windows XP.

    Hello everyone, today I will tell you how the error is solved leading to blue windows screen. In this case, the text of the error message may contain file information (and if it does not contain, then you can view this information in the memory dump using the BlueScreenView or WHOCRASHED programs, there will be more about them), which caused it among common options - win32k.sys , atikmdag.sys, hal.dll, ntoskrnl.exe, ntfs.sys, wdfilter.sys, applecharger.sys, tm.sys, tcpip.sys and others. All about everything we will spend about five minutes of your precious time.

    Blue screen 0x00000050

    In this manual - the most common options for this problem and possible methods correct the error. Also below there is a list of Microsoft's official corrections for specific STOP 0x00000050 errors.

    Due to the reason for bsod Page_fault_in_nonpaged_area (STOP 0x00000050, 0x50) usually has problems with drivers files, faulty equipment (RAM, but not only, it can be peripherals), failures windows services, incorrect work or incompatibility of programs (often - antiviruses), as well as violation of integrity windows components and hard drives and SSD errors. The essence of the problem in the wrong memory address when the system is running.

    We treat BSOD page_fault_in_nonpaged_area.

    The first thing to be taken, when the blue screen of death appears with the STOP 0x00000050 error - remember which actions preceded the appearance of an error (provided that it appears without installing Windows to the computer).

    Note: If such an error appeared on a computer or a laptop once and no longer manifests itself (i.e., it does not constantly jump out a blue screen of death), then it may not be done with the best solution.

    There may be the following typical options (hereinafter referred to as some of them will be considered more

    • Installing new equipment, including "virtual" devices, such as virtual drives. In this case, it can be assumed that the driver of this equipment or it itself works incorrect for some reason. It makes sense to try to update the drivers (and sometimes - install older), as well as try the operation of the computer without this equipment.
    • Installing or updating drivers, including automatic update OS drivers or installation using Driver Pak. It is worth trying to roll back the drivers in the Device Manager. What exactly the driver calls bsod Page_fault_in_nonpaged_area, you can often find out simply by the name of the file specified in the error information (just look in the Internet, what is the file). One more, more convenient wayI'll show you further.
    • Installation (as well as removal) antivirus. In this case, it may be necessary to try working without this antivirus - perhaps it for some reason is not compatible with your computer configuration.
    • Viruses and malicious software on the computer. It would be good here to check the computer, for example, using a boot anti-virus flash drive or disk.
    • Changing system settings, especially if we are talking On the disconnection of services, tweaks of system and similar actions. In this case, system rollback from the recovery point can help.
    • Some problems with the power of the computer (inclusion not from the first time, emergency shutdown and the like). In this case, problems may be with RAM or discs. Help can check the memory and removing the damaged module, check hard Disc, as well as in some cases, disabling Windows swinging file.

    This is not all options, but maybe they will be able to help the user remember what was done before an error appeared, and perhaps quickly correct it without further instructions. And about what specific actions can be useful in different cases will now talk.

    Causes of Stop 0x00000050 errors

    Now about some sufficiently common options, when the STOP 0x00000050 error appears and what can work in these situations.

    Blue screen Page_fault_in_nonpaged_area in Windows 10 When you start or running the UTorrent - a frequent option lately. If UTorrent stands in autoload, the error may appear when you start Windows 10. Usually the reason is working with firewall in third-party antivirus. Solution Options: Try Disable Firewall, use BitTorrent as a torrent client.

    BSOD STOP 0x00000050 error with applecharger.sys file - occurs on maternal gigabyte boardsIf the system of ON / OFF Charge was installed in an unsupported system to them. Just delete this program through the control panel.

    If you have an error in Windows 7 and Windows 8 with the participation of Win32K.sys, Hal.dll files, NTFS.SYS, NTOSKRNL.EXE Try to start performing the following: Disable the paging file and restart the computer. After that, for some time, check whether the error shows again. If not - try to turn on the paging file and restart, it may not appear anymore. Read more about enabling and disabled: Windows swab file. Also here can be useful to check the hard disk on errors.

    • tCPIP.SYS, TM.SYS - Causes of Errors Page_fault_nonpaged_area in Windows 10, 8 and Windows 7 with these files can be different, but there is one more likely option - the bridge between connections. Press the Win + R keys on the keyboard and enter the NCPA.CPL into the "Run" window. See whether network bridges are present in the list of connections (see Screenshot). Try to remove it (provided you know that it is not needed in your configuration). Also in this case, an update or rollback of the network card driver and Wi-Fi adapter can help.

    • atikmdag.sys is one of the ATI Radeon driver files, which can call the described blue screen with an error. If the error appears after the computer output from sleep, try disable quick Start Windows. If the error is not tied to this event, try cleaning the driver with the preliminary full removal In Display Driver Uninstaller

    In cases where the error appears when installing Windows on a computer or laptop, try to remove one of the memory schedules (on the computer off) and start the installation again. Perhaps this time it will pass successfully. For cases when the blue screen appears when you try to update Windows to the new version (with Windows 7 or 8 to Windows 10), a clean installation of the system from a disk or flash drive can help, see Installing Windows 10 from a flash drive.

    For some motherboards (for example, MSI is seen here) an error may appear when moving to more new version Windows. Try updating the BIOS from the manufacturer's official website.

    Sometimes (if the error is caused by specific drivers in application programs) Fix the error can help clean the temporary file folder C: \\ Users \\ user_name \\ APPDATA \\ LOCAL \\ TEMP \\

    If it is assumed that the error page_fault_in_nonpaged_area is caused by a driver problem simple way analyze the automatically created memory dump and find out exactly which driver caused the error will free program WHOCRASHED (official website - http://www.resplendence.com/whocrashed). After analysis, it will be possible to see the name of the driver in a form-minded form.

    Then, using the device manager, you can try to roll back this driver to correct the error or completely remove it and re-install from the official source.

    Another action that may be useful in many versions of the blue screen described windows death - Check operational windows's memory. To begin with, using the built-in RAM diagnostic utility, which can be found in the Control Panel - Administration - Windows Memory Checking Tool.

    • The Integration Drivers of the VMware Tools can lead to a blue screen with a 0x00000050 code, an example is an error "". It is treated with reinstalling drivers on a virtual machine.

    Bug fixes STOP 0x00000050 Page_fault_in_nonpaged_area on Microsoft

    There are official hotfixes (corrections) for the specified error laid out on the official website of Microsoft for different versions Windows. At the same time, they are not universal, but apply to cases when the error page_fault_in_nonpaged_area is caused specific problems (Explanations about these issues are given on the relevant pages).

    • support.microsoft.com/ru-ru/kb/2867201 - for Windows 8 and Server 2012 (STORPORT.SYS)
    • support.microsoft.com/ru-ru/kb/2719594 - for Windows 7 and Server 2008 (srvnet.sys, as well as suitable for 0x00000007 code)
    • support.microsoft.com/ru-ru/kb/872797 - for Windows XP (for SYS)

    In order to download the correction tool, click the "Package Package Available to download" button (the next page can be opened with delay), agree with the terms, download and run the correction.

    Also on the official Microsoft website there are also own descriptions for the blue screen error with the code 0x00000050 and some correction paths:

    • support.microsoft.com/ru-ru/kb/903251 - for Windows XP
    • msdn.microsoft.com/library/windows/hardware/FF559023 - general information for specialists (in English)

    I hope that something from this can help in getting rid of BSOD 0x00000050, and if not - describe your situation, what was done before the error appears, what file is reported to the blue screen or program for analyzing memory dumps (in addition to the WHOCRASHED mentioned, it can be useful BlueScreenView program). It may be possible to find a solution to the problem.

    This alert with code 0x00000050 is usually emerging due to the absence of the requested data in the RAM. Despite the terrible name, this malfunction is not fatal for PC, and it is possible to quickly eliminate it completely independently, that is, without resorting to the services of specialists. The guide below will help even the newcomer effectively cope with the task.

    The main causes of occurrence

    Basically, the cause of the error 0x00000050 is hardware problems. This may be malnutrition problems, faulty RAM, etc. But it happens that incompatible software can be caused by faults, such as antiviruses, firewalls or equipment drivers. If you correctly determine the origin of problems, then the correction will not be much labor.

    The main sources of error include the following:

    1. The problem with RAM or with a hard drive manifests itself in the emerging difficulties when starting a PC, as well as in involuntary disconnects of the computer. It is recommended to try to disconnect the suspicious component and test the operation of the PC without it;
    2. On the problems with the drivers, as a rule, indicates the appearance of an error immediately after the actions of the user itself, which installed virtual devices. Also, the cause can be the connection of new elements of components. Very often an error occurs after the creation virtual drive. Obviously, it is possible to accurately diagnose the cause simple trip devices;
    3. Often, an incorrectly configured OS causes a similar PC failure. It is recommended to take advantage of the possibility of kickbacking "seven" to an efficient state;
    4. The above action with the drivers via the device manager will help if the screen appeared after an automatic or manual upgrade by hardware components of the computer;
    5. Some viral utilities also cause this failure. It is required to make a complete analysis of the PC with the subsequent removal of the found malicious applications;
    6. The protective utility itself, conflicting with some software itself, is often the cause of such a problem. It is necessary to temporarily deactivate the antivirus and firewall, then experience the work of the computer without their influence.

    To fully list all the reasons within the same manual, it is not possible, since their list is significantly more wide. But in 90% of cases, the analysis of the six above items already allows you to eliminate the system malfunction and return the computer to Windows 7 into a normal operational state.

    How to solve the problem?

    First, you should analyze the latest user actions with a computer. For example, if the failure occurred after installing Kaspersky Anti-Virus in PC. It often happens, judging by the numerous reviews of users. In this case, it is necessary to fully uninstall the antivirus and install another, but no longer causing conflicts in the system.

    To identify malfunctions with system elements, you must perform the following several actions:


    But what to do and how to correct the error if it originated during the installation of Windows 7? At the same time, in the absolute majority of cases, it helps a simple shutdown by one of the RAM planes.

    IMPORTANT: Disconnecting and introducing any equipment must be carried out only on the "cold" PC, that is, having previously turned off and de-energized the computer.

    If the failure occurred when updating the "seven" to a newer modification, then it is likely to simply reinstall the BIOS.

    The problem with the driver caused by the driver can be eliminated even by the usual deletion of the contents of the temporary folder. To do this, you will need to perform only a few consecutive steps:

    1. Through "My Computer" enter the contents system volume "FROM";
    2. Next, open the "Users" directory;
    3. Then move to the directory named by the user;
    4. After that, proceed to "AppData";
    5. Find the "Local" section, and in it - the folder "temp";
    6. Select all the contents of the temporary folder and delete it (for this you can call the context menu on any of the selected files and click on the "Delete" line. Then in the next displayed window to confirm your intentions).

    It should be noted that the driver fails can be determined by the Special application "WHOCRASHED". The utility is available for free on official source Developer (www.resplendence.com). It makes the system check and displays the name of the problem software.

    After the name of the culprit is already clarified, the process of its reinstallation will not take much time using the devices built-in in Windows 7.

    To analyze RAM, Windows 7 also has your own tool. If you need to use it, you need to perform only a few following steps: