Rollback to Windows 7 factory settings. Windows from a clean sheet: how to restore the factory system settings on a laptop. Loading the last successful configuration

Many users ask a question: how to reset the BIOS to the factory settings? I will immediately answer, factory settings in BIOS as such are not. It all depends on the firmware version. But the share of truth is still in the matter. Let's deal with what the essence.

Thanks to BIOS, we can configure the operation of our computer devices, independently be it desktop computer or laptop and which operating system is installed. How he will start his work, which will be held primarily to load the system. We can strengthen our power personal computer (True at your own risk and risk as it can lead to the failure of the equipment) and change the modes of operation of our system.

But it happens that over time we forget where and in which sections we conducted changes, or the change did not improve the work, but on the contrary. Therefore, the need to return the system to the optimal configuration, or make the default in accordance with the firmware

To do this, go to the EXIT section is the most last tab Where we save our settings After changing changes to Save, select Load Setup Default (Download by default settings), confirm by pressing OK and reboot the system. That's all.
Reset bIOS settings Allows you to return it to the factory state, depriving all user and other settings. Often, this step allows you to solve many problems of computer work.

The transition to factory settings can be performed in three ways: through menu Bios., through the computer motherboard and using the motherboard battery. Each method will lead to the same result, but their fulfillment is fundamentally different.

BIOS RESET through its menu

Follow the login to the BIOS. If you do not know what the key on your computer is responsible for the entrance to this menu Settings, we cannot reply 100%, because various keys can be used for different motherboards and versions of BIOS. However, as practice shows, most often as hot key Can perform F1, F2 or DEL. Find out what button in your case is only an experienced way.

To do this, send a computer to a reboot or simply turn on. Once the computer starts to turn on, you will need to repeatedly and quickly press the key responsible for the input to the BIOS (for more accelerated results, it is allowed alternately and also quickly press all three keys listed by us). If you log in to the BIOS, this or that button failed, you will need to repeat the attempt using this time another key.

Entering the BIOS, we need to open the menu that is responsible for resetting the settings. Again for different versions The BIOS you need the menu item can be called differently and in a completely different place, for example, in the old versions of the BIOS on the main screen, items that will affect the word "Defaults", for example, "Load Optimized Defaults", which allows you to reset Settings to optimized, or "Load Fail-Safe Defaults", which will reset the settings to eliminate failures. By choosing a similar parameter, you just have to agree with the further procedure and wait for its end.

On more modern versions of BIOS, which, as a rule, are available on laptops, you will need to open the "EXIT" tab for our task, where you need to choose the item like "Load Setup Defaults".

Well, finally, the most modern bIOS version (UEFI), which are already supported by the work with the mouse, and also have a more pleasant eye interface, can return the factory settings in the "Save and Exit" tab, where the location "Load Defaults" is located.

BIOS RESET through the motherboard

This method is suitable if in your case the BIOS does not start. It is not particularly difficult, however, here we will need to look under the case system Block.

Turn off the computer and definitely de-energize, limiting power with a special button with back side system unit.

Open the system block housing. Having found the motherboard, you will need to find a jumper (jumper), which, as a rule, is located next to the battery. As a rule, a similar jumper is signed by the word "CMOS".

In most cases, the jumper is equipped with two or three contacts. If the contact is two, then you only need to move the jumper for a few seconds into the second position (15 will be quite enough), and if the contact is three, the jumper should be moved to the second contact.

At the end of the procedure, you will need to press the computer power button for seconds 15 (the computer does not turn on, since it is de-energized).

After performing all actions, return the computer to your previous state, that is, collect the system block body, and then provide a computer power.

Bios reset via the battery on the motherboard

The third way to return bios to factory settings, which will also require "implementing" under the system unit body.

De-in the computer, transferring the button to the "0" position on the reverse side of the system unit.

Open the system block housing. On the motherboard, you will find a small battery.

Try neatly remove the battery for 15-30 seconds, and then install it in place. This action will lead to the fact that the bios will reset the settings.

We draw your attention to the fact that some motherboards Equipped with fixed batteries, so if you do not know which battery in your case, act very closely (it is often enough to press a special latch to extract).

Collect the system unit body, and then return the power to the computer.

Each of the presented methods is guaranteed to cope with the task. What way to use is to solve you, based on the type of problem, your skills and preferences.

If the operating system installed on home computerFor some reason, it works with failures, it will be useful for you to know how to reset Windows 10 to standard factory settings. Sometimes such a radical way to solve problems with performance is the only way out.

If you want to produce reset Windows 10 to standard factory settings, then you need to clearly know how to do it not to commit annoying mistakes. First of all, to reset the parameters without loss necessary informationBefore conducting such an operation, it is worth keeping a backup copy of all important data on your computer.

Knowledge about how to return Windows 10 to standard factory settings and reset the previously used parameters may need not as often as other options. Such an operation is performed in exceptional cases when the problem with the performance cannot be solved by other methods that are less radical, for example.

Return to the factory settings Windows 10

As an ordinary user to roll back Windows 10 to standard factory settings? To reset the parameters, it is enough to follow a simple instruction. Through the Start menu in the system parameters, find the "Update and Security" section. Opening this item on Windows 10, you should find the "Restore" tab to reset the former settings. There will be an option that allows you to return your computer in the initial state.

How to restore Windows 10 to the initial factory settings? Just click the Start button in the specified section to reset the parameters used. The system recovery is necessary when your computer works incorrect for any reason. As a last resort, to return the normal speed to your device, you should completely delete all the contents stored on it, and reset the previous parameters.

If you click the Start button in the Repair section, the computer will prompt you to save personal files, removing only the applications used and dropping the parameters. If you ignore this item by clicking the "Delete All" button, the computer will be completely cleaned, and your files will no longer restore if you, of course, did not save them on another carrier in advance.

Before throwing out Windows 10 to factory settings and reset the parameters used earlier, try applying other ways to correct the situation. In some cases, to restore the desired performance you will be enough to make a simple reboot or drive the device through the antivirus.

After selecting the option you need, the system will notify you about what actions will be made in the future. You will see the inscription that the device is ready for recovery. When returning to the factory standards, the following actions will be performed:

• personal files and applications are deleted;
• returns standard settings
• made a reinstalling Windows 10.

Computer settings reset capabilities

If necessary, you can produce reinstalling Windows 10 Without using a function that allows you to reset the parameters to factory. In this case, use the installation disk and follow its instructions. To get to the BIOS Wednesday, simply press the "Delete" key on the keyboard. Then you will fall in the menu where you are offered to troubleshoot troubleshooting.

The system itself will determine whether it is worth producing a complete return to the initial parameters or you can do other methods. After diagnostics, if necessary, you will be prompted to return the computer to the original state. Next, the actions when using the installation disk will be similar to those that you want to perform when restoring the system through the control panel.

Before demolishing your system to factory settings, it is recommended to conduct a detailed diagnostics of the device status. Perhaps there will be less radical ways to solve the problem. After recovery, the Windows 10 operating system itself will remain on your computer. From this point of view, your device will look as if they have never used before.

At the same time, the Windows 10 Operations itself will be reinstalled, which should help restore the performance of the device you use. Next, you will have to re-install all the programs you need. In the standard help on the site microsoft support You can read detailed instructionsHow best to start using your device to re-with the net Operation of Windows 10.

Excellent day!

The operating system from the company "Microsoft" Windows 7 has come to replace the failure "Wasta". And almost all users and IT specialists in one voice argue that this is the best operating system since the unforgettable XP. However, there is an opinion that it is already hopelessly outdated, and the "dozen" more corresponds to modern realities. This is true, but so far the lion's share of users is sitting on "seven". And everything suits them.

Any OS used to work unstable over time. And "Windows 7" is no exception. Sometimes halted viruses. It happens that incompetent users kill the system with their actions. Be that as it may, in the "seven" there is one extremely useful option that will help reset the system to the factory settings. In the people, it is called a rollback of the system.

More information about the option

So, the "windows 7" rollback to the factory settings is possible only on those devices that support this function. These include the vast majority of modern laptops and monoblocks. Classic PCs, unfortunately, are deprived of this useful option. It is worth noting that the rollback process directly depends on the device manufacturer, for the buttons can be completely different. But the result is always one - a varical clean operating system. As if the car is just from the store. It is worth considering that all user data will disappear. Therefore, if you are expensive to your files, it will be easier to reinstall the system. So at least the files will remain integer. If it does not scare you, then we will move on.

Conditions of kickback

It is worth mentioning that this procedure is available only for those laptops and monoblocks, which still have a system installed by the device manufacturer. The fact is that when installing the company's specialists created a hidden section with a backup (backup) on the hard disk operating system. In the event of problems, you can restore the stock OS from this very copy. But if you reinstalled the system yourself, then, it was likely to demolished this section by placing hDD for new Installation. Then this method is definitely not for you. In your case, only installing a new OS. If you still have a factory system, then everything is fine. So how to return "Windows 7" to the factory settings? This can be done in several ways.

Using a special key on the device case

This discharge method will be useful to those who do not load "WINDOVS". Many manufacturers of laptops and monoblocks equip their devices with special keys that are able to run the restore system from the backup. This can be both a specific button on the keyboard of the device and a separate selected component. It all depends on the manufacturer of the laptop. How to return "Windows 7" to factory settings using a specific button? If you have ThinkPad from Lenovo, then somewhere on the side faces of the device there is a magic button ONEKEY RESCUE. After pressing the system restores it. Exactly the same picture in the laptops in the series and other devices from Lenovo. The same button (but with another name) is in laptops from Sony VAIO series.

Using the device keyboard

This method is suitable for all other laptops (not "Lenovo" and not "Sony"). combination. So, for the production of the company "Dell" the combination of keys to restore OS - Ctrl and F11. But how to return "Windows 7" to the factory settings in the laptops from Rover? These devices are quite rare and capricious. But they have their own rescue button. You just need to press and hold the ALT key until the recovery process starts. In principle, the buttons are indicated in the instructions for the laptops. You just need to read them carefully. Even the devices released 5-7 years ago have this wonderful feature. And she can use. But only if the original operating system is installed. Without it in any way.

Using the System Utility "Windows"

How to reset "windows 7" to factory settings using OS capabilities? There are arsenal system and such an option. The utility "Restore System" is called. But it is worth considering that it works only if this service was not disabled (which is very popular in assemblies from "schoolchildren"). We go to the "Control Panel" and select the "Archiving and Recovery" item. Here you need to click on "Restore System Parameters or Computer". Then you need to view all the features of the utility and click on "Extended Recovery Methods". Here will be the item "Return a computer to a state specified by the manufacturer." So you need it.

After clicking on this item, the operating system will offer to create a backup copy of user data. It is necessary to agree. After that, the system will restart and the reset process will begin. It will take quite a long time, but at the output, the user will receive a varical clean OS. So, the program for the factory (rollback to them) is called "system restoration". Need to remember.

Restoring factory settings before entering the OS

There is another option to roll back the system. It can be launched during the boot of the OS. How to reset "windows 7" to factory settings, not going into it? As easy as pie. Just when loading the operating system, press the F8 key. A familiar menu will appear with the possibility of selecting the download mode. There is also notorious "safe mode". But we do not need it. We will need a "Troubleshooting Computer". After full loading of the recovery shell, it will be proposed to choose a language, account and recovery parameters. In the last item, you must select Recovery Management and select item to restart. After that, the system will not boot, but the reset process will begin on Stock Specifications. This is another answer to the question of how to upgrade "Windows 7" to factory settings.

It is worth noting that it is necessary to use this method forced reset only in the most extreme case. And about the safety of user data and it is not necessary to speak. This method is designed for those when the OS is not loaded and nothing helps. So be careful with this option. Do not abuse, because it is fraught with serious consequences.

Finally

So, we disassembled possible answers to the question of how to restore the factory settings for Windows 7. As you can see, there are many ways. All of them help achieve the desired result. But only some of them are able to save user data. Therefore, it is strongly recommended to use the "restoration system" from under the operating OS. However, if this for some reason is impossible, then in the choice of recovery tools it is better to stay on the version provided by the device manufacturer. So it will be more reliable. Do not forget only to do backups of their data. Now you know how to return the "Windows 7" to the factory settings without losing data.

Coming to the store computer equipmentThe buyer offers a large assortment, from which to choose a decent computer is difficult. But professional consultants will select exactly what needs to be based on an individual approach. When choosing a computer, consultants install factory settings on a computer or laptop. These are the most initial and simple settings that are available to almost everyone.

Further installation or reinstalling Windows system is made by the buyer independently or addresses specialized companies for such a procedure.

Total moments

Personal computer can occur due to a large number of reasons. The very first such reason is the presence of viral programs that do not just clog the memory of the computer, but also destroy its files, documents. How to restore the computer to the factory settings?

When such a situation happens the best and alternative installation of the operating system is the automatic reset of Windows to the factory settings that were obtained in the store. This option will simplify the work on the restoration of the operating system. It will reset it completely, will allow troubleshooting and install a new operating system. But automatic reset is not all computers, so some will need to manually use the reinstalling system.

In the event that the system is reinstalled manually you need all the available information to transfer from the computer to other media, since at the time of reinstalling information may be lost. There is an opportunity to restore information, if suddenly it happens, but it may not always do this and not always such an opportunity.

If you decide to install at home, the autonomous heating system is recommended to refuse this article. About the heating convector we tell.

Question How to return the computer the factory settings also worries users and in other points, not only in case of breakdowns. And then users ask themselves as a task how to reset the computer to the factory settings, because it the best way In many cases.

There are times when the Windows 7 reset will be useful to the computer.

The first point is the sale of a computer. A new owner will be very convenient to get a computer with factory settings, as in the store.

The second point is the transfer of a personal computer to another employee in the organization.

The third moment is the slow work of the computer, the driver stops loading, some programs work.

And in these few times this is the installation. And here, having learned several reasons for the occurrence of breakdowns and problems, the time comes to study the ways to eliminate them. There is a question how to return Windows 7 to the factory settings?

There are three options to restore the computer to factory settings.

Immediately make a reservation - full reset Systems are not always required. To save time and strength you can try first simpler options.

Methods of troubleshooting

The very first way to eliminate errors is loading successful configuration.

The following option will turn out if the computer supports the built-in Windows Restore function.

And the third method is to use the system boot disk. Most users should know how to use any troubleshooting actions. This article proposes to consider these three ways to make the factory settings on the computer.

What should be done

So, the first way. Loading the last successful configuration. This method is considered very simple, so even the most urgent user of a personal computer will be able to master it. Before the beginning windows downloads 7 You must use the F8 button and select the "Last Successful Configuration" phrase. At this point, the system will restore the last version of the computer, which was the most successful and successful. Such an action will return all working system files.

If simply the usual reboot of a successful configuration does not help, then you can immediately restore the system using recovery points. They are fixed at certain points with any state of the program and, choosing the most successful point you can try to restore Windows 7. Such recovery points can be made independently or in the configuration of the personal computer to set the frequency of automatic saving.

Important! On some computers feature automatic creation The default recovery points are disabled. We recommend it to turn on, as in the future it can help in correcting malfunctions.

The following way offers to use systemic boot disk. This option is used with more serious problems of the Windows 7 system. It is basically a strong defeat of the computer viral files. Here can only help a disk that will help restore the operating system of the computer. When on the computer is included safe mode You need to click on the item from the Troubleshooting menu, then you need to insert the disk. IN open window Select the "Restore System" function. The program will offer different options for recovery. All of them are practically identical, so the choice is behind the user. The recovery procedure is the same as working with applications. But an important feature of the use of a disc is the elimination of the effects of viruses on personal support. Disk manufacturers also provide special instructions that help figure out and correctly reset the system. The principle of such programs is almost the same, therefore there will be a single disk to study such a moment as returning the computer to the factory settings.

If nothing helps

If all these options described above will not help you restore your computer and do not give positive resultsYou can make a complete reset of the entire system. Some models of computers and laptops contain system sections with a copy of your basic software Windows 7. Unified Recommendation How to run this procedure does not exist. As a rule, at the moment of turning on the computer, the tip lights up at the bottom of the screen indicating the main operating keys. If there is a F (digit) for recovery - boldly press the specified button and follow the instructions. If there is no such item, we advise you to read the documentation for your computer. It must indicate in which keys this procedure is started.

If all the recommendations do not help and the computer refuses to work as before, we recommend contacting specialists. Always remember that in case of a more serious breakage, there is a risk of increasing more damage, if you do not act on the instructions for your own risk.

It's no secret that with long-term using WindowsThe system begins to work more slowly, otherwise to frankly lag. This may be due to the clogging of the system directories and the registry "trash", virus activities and many other factors. In this case, it makes sense to reset the system parameters to the initial state. Let's see how to return the factory settings for Windows 7.

There are several methods for resetting Windows parameters to the factory state. First of all, you should decide exactly how you want to reset: Return the original settings of only the operating system, or, in addition, to completely clean the computer from all installed programs. In the latter case will happen full removal All data from PC.

Method 1: "Control Panel"

Reset windows settings You can produce by performing the launch of the tool required for this procedure "Control Panel". Before activation this process necessarily.

1. Click "Start". Go to "Control Panel".



2. In block "System and safety" Choose an option "Computer archiving".



3. In the window that appears, choose the lowest point "Restore system parameters".



4. Next, go to the inscription "Extended recovery methods".



5. A window contains two parameters:
   • "Use the system image";
   • "Reinstall Windows" or .

   

   Choose the last item. As you see, it can have a different name on different PCs, depending on the parameters given by the computer manufacturer. If you are displayed name "Return a computer to a status specified by the manufacturer" (most often this option is at laptops), then you just need to click on this inscription. If the user sees the item "Reinstall Windows", before pressing it, you need to insert into the drive installation disk OS. It is worth noting that it should be exclusively the instance of Windows that is currently installed on the computer.

6. Whatever the name of the above point was not, after clicking on it, the computer is restarted and the system restores the factory settings. Do not be afraid if the PC will reboot several times. After completing the specified process, the parameters of the system will be reset to the original, and all software installed will be deleted. But the previous settings, if you wish, you can still return, since the files deleted from the system will be transferred to a separate folder.

Method 2: Recovery Point

The second method involves using the system recovery point. In this case, only will be changed system settings, and downloaded files and programs will remain in inviolability. But the main problem is that if you want to reset the parameters to the factory settings, then to do this, you need to immediately, as soon as you purchased a laptop or installed OS on a PC. And this is done not all users.

1. So, if there is a recovery point created before using the computer, then go in the menu "Start". Choose "All programs".



2. Next go to the catalog "Standard".



3. Go to the folder "Service".



4. In the directory appeared, look for a position "System Restore" And click on it.



5. The selected system utility is launched. OS recovery window opens. Here just click "Further".



6. Then opens a list of recovery points. Be sure to install a tick near the item "Show other recovery points". If there is no one option, and you do not know which one to choose, although it is firmly confident that we created a point with factory settings, then in this case, choose the earliest by the date item. Its value is displayed in the column. "Date and time". Highlight the appropriate item, press "Further".



7. In the next window, you can only confirm that you want to roll back the OS to the selected recovery point. If there is confidence in your actions, then press "Ready".



8. After that, the system is rebooted. Perhaps it will occur several times. After completing the procedure, you will receive a functioning OS on the computer with factory settings.

As you can see, there are two options to reset the state of the operating system to the factory settings: by reinstalling the OS and return parameters to the previously created recovery point. In the first case, all installed programs will be removed, and in the second - only system parameters changed. What exactly from the methods to use depends on a number of reasons. For example, if you did not create a recovery point immediately after installing the OS, then you have only the option that has been described in the first method of this manual. In addition, if you wish to clean the computer from viruses, then only this method will be suitable. If the user does not want to re-install all the programs that are available on the PC, then you need to act in the second way.