Receiver DRE 5000 without advertising. Freebie and digital TV. In the Setup menu, select Data Transmission

Tricolor TV is one of the leading companies, on the field of digital telecommunications. Numerous clients can enjoy high-quality digital television and a fairly extensive list of thematic packages. However, sometimes it happens that the channel encoding suddenly occur, and instead of familiar gears, the TV shows only the inscription "Coded Channel (DRE)" or "No Access".

What to do in the current situation and how to decode yourself the channels tricolor TV

There are several reasons for which the channel encoding or all TV channels can immediately occur. Having determined it and removing it, you can independently establish the work of the receiver, without referring to the specialist for help.

Prices in 2020, Tricolor TV packages range from 6 to 12 thousand rubles. This is a considerable amount, allowing any user can not allow. Therefore, specialized programs have become increasingly used to decorate the channels that hack the receiver, which is due to the virus.

But it is worth remembering that the virus can also negatively affect the entire system of the entire system, including TV.

Causes and their decision

Causes of channel encoding:

1. The first reason in which the encoding occurs, serves an overdue payment for the services of Tricolor TV. Not on time, the paid account entails shutdown television, and as a result of channel encoding. After payment, this problem should disappear. It is important to remember that when you pay, you must specify channel packets. Therefore, it is recommended to very carefully follow the condition of your balance. It is most convenient to do it in personal Cabinet On the company's website or through the online service.
2. By ordering a service that you have not previously used, pay attention to what your tuner can support the desired format. If not, you will come across the problem of the coded channel. For example, a maximum channel package can only be played with HD supporting equipment.
3. In the event of a long lack of communication between the receiver and the satellite, the problem of non-working channels may also arise. This may occur due to lack of nutrition. In this case, the receiver will not receive the activation keys of paid channels and simply cannot connect them. A similar situation may occur if after payment, the tuner was not connected to satellite antenna. Decide this problem You can, turning off the receiver for one minute, then turning it on, find a free channel to make sure that the equipment is working. After the pictures appear on the screen, go to one of the paid channels and wait until it connects. In some cases, the period of obtaining activation keys reaches eight hours.
4. There are no rare cases when the favorite channels disappear due to adverse weather conditions. Unfortunately, it will be possible to establish this situation, only waiting for the element to calm down.
5. Outdated receiver model, can also cause channel encoding.

- (not official!) - This software is developed on the basis of the official 3.4.369 (that that is poured from the satellite 10/07/13.) The main difference of this firmware is not shown. advertising banners When switching channels. Works stable.

Features of this firmware:

2 - From the main menu, deleted by submenu. Search for tricolor-TV channels (but it is still available in the \u003e\u003e Setup \u003e\u003e \u003e\u003e automatic search \u003e\u003e Search type \u003e\u003e tricolor TV) or when initial installation (Reset to factory settings)

3 - When entering the main menu or the Game menu, the picture does not disappear!

4 - Removed in the main Nnah Ryushki with side (in my opinion it was not harmonious :))

5 - organized output from the channel list on double pressing the OK button (exactly the same as it is organized in 99% of all tuners)

6 - When you press the game button, the swastika Search for a tricolor channels is now like M presses the swastika games :)

7 - Changed the EPG menu algorithm - is now much more convenient (everything can be done alone with the OK button)

8 - in the Tetris menu, switched to the OK button and up

9 - perhaps, but not guaranteed !!! Eliminated the cause of hanging receivers with modules 11 series.

10 - In the firmware, current channels are already collected on 05.10.2013, the whole garbage is removed !!!

Past releases

The procedure is quite simple and does not require special skills from subscribers, it is only necessary to follow the instructions for replacing software with infocanal. The update process takes some time and need to be patient and wait for the end. But despite all the warnings, some users do not wait for the end of the software update process and in the end the receiver ceases to work.

Practice shows that in very rare cases, even waiting for the end of the software update, the receiver may not be turned on after a reboot. The diagnosis is one - failure when updating software.

But do not despair. It is possible to fix it yourself and at home if you have a computer or one more such a worker. Below is described how to do it. Helps in 99% of the unsuccessful update software from the satellite.

Update software from a computer.

1. Acquire / soldering themselves nulm-model cable

2. Disconnect the receiver and computer from the network.

3. Connect the RS232 the receiver input with the COM port on the computer.

4. Turn on the computer.

5. Unpack and install the program

6. And unpack the desired firmware of the receiver:

7. Run the program (the label must appear on the desktop).

The following window will appear.

8. Click the Open File button and select the downloaded file with the firmware in the window that opens, pre-having unzipped it.

9. Click on the Upload button, turn on the receiver to the network and turn the POWER button from behind the receiver.

10. The FILE UPLOADING process execution indicator will begin to show% and the time before the end of the software boot process.

At the same time, the letter L (Load - load) and% of the process will be displayed on the digital table of the receiver.

11. After that, the Burning process execution indicator will begin to show% and the time before the entry of the recording process (firmware) of the software.

At the same time, the receiver B (BURN - Burn) will be displayed on the digital table of the receiver and% of the process.

12. The software update process is completed. Turn off the receiver and computer. Disconnect the zero-mode cable.

Record ID: 35 DOES NOT EXIST!

Update software from the receiver (on the example of DRE 5000).

For DRE 4000, DRE 5001, DRE 7300, the process is similar.

1. Acquire / soldering themselvesnulm-model cable.
2. Disconnect the receivers from the network.
3. The worker must be connected to the TV. The problem receiver does not connect to the TV.
4. We connect both receiver with a zero-mode cable.

In the picture above the worker receiver. Downstairs a problem receiver.
4-2. Turn on the worker.
4-3. We enter the menu, select the Setup item.

5. Enter PIN. By default, it is 0000 (four zero).

6. In the Setup menu, select Data Transmission.

7. A window will appear:

On the remote control, press the blue button.
8. Two scales appear. And the data processing scale will begin to be filled.

9. When the scakewood of the data will come up to 100%, the inscription appears:

10. Include non-working receivers - Turn on the network and turn on the POWER from behind the receiver.
11. It began to fill the lower scale.

On the receivers indicators will be displayed in% course of the data transfer / loading process (on the scoreboard L - LOAD symbol, loading, on the lower receiver, 5 - transmission, on top).

12. After that, on the TV will appear:

Receivers do not turn off !!! The process of writing the firmware in the flashing (defective) receiver begins. In this case, on the screen of the process indication of the process will not happen. The display process is visible on the display of the receiver of the receiver (on the scoreboard symbol B - Burn, burning, on the lower receiver).

13. We are waiting when the indicator will reach 100% on the receiver in the receiver. After the released receiver will reboot and the following will be the following:

14. The firmware process is completed. The console to the question "Data transmission is completed. Repeat? " We choose "no". Turn off receivers and disconnect the zermodemal cable.

Video signal encoding technology has become one of the most promising to be introduced as a mass broadcast. In Russia, this process was launched back in 2007-2008, by phased implementation of multiplexes - TV channel packages, which are available through the receiver. The so-called first and second software blocks according to the legislation are publicly available, which does not cause resistance in their broadcast among the market operators due to the lack of commercial benefits. The massive reduction in this channel package (on the "legitimate" grounds with one of the industry leaders) led to the fact that subscribers began to look for all available methodsHow to watch tricolor TV to freebie. The company has more than 50% of the audience at which such measures will greatly hit.

What is available to the client?

As already mentioned, at the state level approved a list of two multiplexes (a total of 20 channels), which are all operators digital television We must translate without restrictions (encoding). In fact, the subscriber on the general reasons has access to only 8 channels (information, promo, TV-TV, TV2-TV). The rest become available only under the condition of an annual subscription to one of the existing service packages (single, single multi, children, etc.). Such pleasure will cost 1200-4600 rubles. a year, that is, about 100-380 rubles. a month, which is another unpleasant surprise from the monopolist of the market. Moreover, the policy of the company is such that the previous merit and for many years of cooperation with the operator are not taken into account, and the subscriber immediately disabling the subscriber.

Search for free haloe

View channels both free and for money is possible only if there is a receiver / television console. It accepts a digital signal, and its decoding is engaged in a built-in or complete module (CI +, CAM). Consequently, the root cause of problems and possible paths Their decisions should be sought in these two components.

On the this moment There are several options for action, liberal or not quite relative to the operator itself.

Exchange receiver for new. This approach is massively practicing the company itself, as the only true one. The fact is that the pirates periodically crack the protection of receiver, leaving the operator not to cases. The latter, in turn, adopts new samples, offering customers to exchange old with surcharge or cost, continuing to watch on previous conditions. Thus, a network of pirate equipment is excluded and an additional source of earnings for the operator itself appears.

Exchange receiver on third part. In fact, this means the refusal of the company's services and the transition to another with the replacement of equipment. If they are armed with statistical data, it becomes clear that the other five largest operators The digital market in the aggregate is barely reaching the market share that the leader covers. Accordingly, to expand the audience, they can offer much more interesting and flexible terms of cooperation.

Pirate Po. Most of the company's customers are not at all free viewing Favorite channels. In this case, the first assistant becomes the Internet where you can find different user / pirated plugins, the installation of which removes the restrictions.

Cardcharering. This term hides a certain compilation of free and official approaches. The fact is that one receiver is designed for one TV, and if there are several of them in the house, then you will have to get out of several receivers. An alternative can be an OSCAM emulator that allows you to distribute over several points.

Refracting. Another option can be the use of third-party cards, for example, Goldwafer. They are perfectly suitable for Dreambox receivers, emulate official cards. Among the obvious advantages of this approach, you can select the lack of permanent update and viewing TV channels on tuners without emulation. The only minus is quite high price.

Use the official proposals of the operator or organize free viewing not by completely legal methods - a purely personal decision of each subscriber, which does not last depends on the family and corporate budget.

Initially, loved, and now they are mostly pensioners in full. And who they are after that. Article +. There would be more more of them with more detailed schemes.

i use a pensioner of a tricolor 5 months, and I pay for full. There is no discount on such a case and constantly see that there is no signal, then some errors and need to wait for 8 hours to appear image. Maybe enough to milk pensioners?

The arrogance is impossible. I paid for the annual signup of the tricolor through the Euroset. I looked 3 months and turned off. Balance 0. Began to understand. What is interesting and in Euroset and in Tricolor shout in one voice that there was no payment. I ask how I watched 3 months? In Tricolor, they answered that there was a program crash. Is that already global conspiracy? I was disappointed in Tricolor (I am writing specially with Mal.Bukva)

Tricolor disappointed monstrously. The subscription time did not come out, and I was already turned off. The operator by force insists: buy from us another receiver, you are outdated !!! I understood, these passings make grandmas on the replacement of receiver ... A plate on the wall remained on the "memory" of these passing ...

The operator is not bad. But damn how many good channels were thrown out from the package. What is nothing to look. And the price is the price of Doy God. It does not care and not expensive 1500. But to watch there is nothing. better Rostelecom or MTS. Even more expensive, but also the channels are more.

Yes, this tricolor got everyone! The most offensive, everyone complains, and few people refuse him. I would have a strongly understood, long tricolor would be free. Or almost free. Discard everything from this Mr., and all happiness will be!

For pensioners, you ask the question about the dokey of pensioners to Kremlin, Putin and also get a fig. Upon fact, block all the free channels, in the channel editor, since the shutdown command comes on them the zero channel is mainly. Create PIN to lock in the settings. At the very beginning of the procedure, pull the wire from the receiver, reset the settings to the factory. Further as written above. And more often, watch the TV so that the activation keys do not disappear. We have a madhouse everywhere everywhere, not only with satellite.

If you wish to purchase the DRE 5000 receiver, then you will be interested to know about it as much as possible. Our article will provide you with the necessary information.

The receiver of the Tricolor model DRE 5000 uses special demand among operator subscribers. The prefix contains support for DRE conditional access with the ability to work on the network of this operator. It is fully configured under the tricolor, it provides maximum simplicity of its immediate use.

In contrast to its predecessor in the form of 4000, the DRE 5000 receiver is highlighted by an updated case. Due to this, it looks as attractive as possible, and this fact highlights it significantly against the background of many other consoles.

The DRE 5000 satellite receiver received a 7-segmented and 4-digit display. It displays all the basic parameters of the operation of this device and can be easily controlled by the prefix.

That is, the receiver tricolor TV model DRE 5000 has best combination Price - quality and will be able to ensure full-fledged operation.

Additional features of DRE 5000 and 7300

The DRE 5000 tricolor receiver is provided with a very attractive price.
It will cost you much cheaper than all possible counterparts, and this will become a significant purchase advantage. When purchasing the price itself, the price is completely reduced to very small values, because the company makes discounts to its subscribers.

Some other features of the presented model:

• Accept the signal device can be in DVB-S / QSPK.
• Can be used with motorized antennas.
• The device memory is designed for 5000 channels.
• Enough powerful processor and full signal processing.
• The channel number indicator on which you are now.

But there is a similar receiver under the name of the DRE 7300. Another device number speaks of originality, but in fact 7300 is fully identical to his fellow. It is produced at the same factory, according to the same scheme. 7300 does not have any differences, so it should not be considered it with a separate device.

The prefix has ample management capabilities and can be configured to each specific TV. The menu and the interface are fully fulfilled in Russian, and you will not have any problems with control.

Sharing consoles

Naturally, many were interested in the Sharing Creatitives DRE 5000. This procedure is very popular among users and gives many opportunities. As a result of hacking, you do not need to buy access at the operator itself, and this will become a significant advantage for the owner.

What gives the ball:

• You get full access To all channels, and do not need to spread huge amounts for subscription.
• You can view various TV packages.
• Significantly increases the number of available programs.

The procedure is carried out by gaining access to a specialized server. But remember that it is not free, and you have to lay out a certain amount for access to the service. Usually it is a few cents per day, which are several times less than the company itself.

October 2012. For a week, 15 GS-8300 pieces brought with dead power supplies, up to blown paths that cracked textolite and burner SMD resistors.

mouse over the image to zoom

How everything happened is clear - an electrolytic or oxide capacitor, standing at the entrance (C5) dries, gives pulsation, but so far everything works. The transistor of the primary winding of the transformer (Q1) overheats, the parts of the SMD burn around it, the pathways of the board and the power supply becomes faulty.

Native food blocks ended long ago, and the GS-8300 receivers were made and drove away. Of course, it was possible to repair the tracks of the tracks, installing the jumpers, attack details - in short, it was possible to restore the power supply from the ashes and at the same time working it would be regularly, the work looked not quite aesthetically and the client was better not to see the result of the master's actions. Yes, and of course, nevertheless left for the repair of each block.

Therefore, I went to another way - I took it and adapted it for the GS-8300 receiver, just immediately make a reservation that there are several models of power blocks for the DRE-5000, the photo below is suitable - it is also the most common (right in the image does not pass in height )

Pickup connectors DRE-500 and GS-8300

№ DRE-5000 GS-8300

So, what needs to be remade in the block - remove from the block of the 8th and 10th wires and cut them off from the power supply itself (one of them do not throw away, it will come in handy to us later), cut off the block of pads under the 10th wire, and there is a knife Our connector has become 9-pin, the 7th wire is rearranged into the nest 8, cut off the wire with a slot 7 and connect it with a wire with a wire 6. Total - we get the GS-8300 connector, though instead of 24V we will have 22V, but this Unnecessarily and checked for years - it does not affect the result.

Next, the mechanical fit of the power supply - we strip the passage to the clutch under the cloud jack, with the same tool, we reduce 3-5 mm the length of the block. And finally carry the C1 condenser, freeing the place for the power switch

Connect the network wire. Insert the block, laying insulator- can plastic from the bottle, fastened with one screw, the second point of attachment is the groove on the housing. ready, it remains to close the lid

Thus, about 300 receiver was repaired, in two years one refund - knocked out C17