How to roll back the system to windows 10. How to restore the system to Windows 10. Recovering your system or resetting your computer using a recovery disc

In any version of Windows, starting with XP, all crashes and problems could be corrected through the system restore function. You can learn more about this tool. But a little below you can get information specifically on how to roll back Windows 10 and thus solve problems with its performance.

The tool that we will use to rollback the system will allow, if we want to, remove any Windows data, including user account files and their personal settings.

As a result, upon completion of the process, you will have a completely cleaned and repaired PC, in the same form as it was immediately after the installation of the operating system. In order to achieve this result, follow our step by step instructions:

1. We start the system parameters. To do this, open the Start menu and click on the little gear icon.

1. In the newly opened window, select the tile surrounded by a red frame.

1. Now in the left half of the window, click the "Restore" item, and in the right half - the "Start" button.

1. Next, we will be prompted to save our files or delete them. Depending on what you need, click on a specific option. We do not need the data, so we delete it.

1. But deleting files can also be done in two ways. You can simply erase them or format the drive completely. We choose the second option.

• just delete my files. If the PC is installed at home, you can use this option. Usually on such computers there is no classified information and attackers with special equipment will not hunt for your hard drive. But in principle, such data can be restored;
• deleting files and cleaning the disk. After choosing this option, no one can restore the data. This is best done before selling your PC or donating it to others. Windows will format completely system disk, Will "slice" a new file table and there can be no question of any file recovery.

Let's move on to the next step.

1. Before we roll back the system, we will be asked once again whether our intentions are correct. If everything is correct, then click on the "Continue" button.

1. The process of deleting all data will begin and rollback Windows systems 10 to its original state. The process may take a different amount of time depending on overall performance computer, in particular, its disk subsystem, the degree of clutter and the size of the disks themselves.

1. After the erasing is complete, the PC will reboot to start the system recovery procedure.

1. Windows 10 rollback will begin, after which you will get the computer as it was immediately after its installation.

Revert to a previous version of Windows

Microsoft has provided Windows 7 owners with an opportunity free update to the new "Ten". In this regard, users have a question - is it possible, after such an update, to roll back Windows 10 back to the "Seven". We examined in detail this topic in his article.

Let's just say that rolling back the Windows 10 system is possible, moreover, it's quite simple. The only thing that is needed for this is that no more than 10 days have passed since the update. This is how long the system stores the Windows.old folder, respectively, in this period of time, you can rollback.

If 10 days are out, you will have to reinstall Windows 7 - we also wrote about this in the article, the link to which is a little higher. The material is presented in the form of detailed step-by-step instructions with screenshots and videos, it is impossible to get confused in it, and each user can install Windows 7 on his computer.

How to rollback an update

Important! All actions described above should be carried out exclusively on behalf of the administrator.

Summing up

In the article, we figured out how to roll back Windows 10. In one of our topics, you can also find out. But even if you have questions, you can ask them in the comments to this article, and we will give good advice in any situation.

How to rollback Windows 10: video tutorial

Let's see how to rollback Windows 10 back to the previous version of the operating system after updating the system to a new build. Microsoft regularly releases new versions of the Windows operating system.

In each new version operating system, the settings and operating parameters change to a greater or lesser extent, compared to the previous version. After updating to a new build of Windows, some users have problems with their computer.

Problems can be of an objective nature: some applications stop working, problems with drivers, etc. Perhaps also subjective perception of the new version: it seems that in the previous version everything was simpler, more convenient, faster, etc. Therefore, it becomes necessary to return to a previous build of Windows that was running on the computer before the system was updated.

With these circumstances in mind, it provided an opportunity to return to the previous version of the operating system.

If the user decided to return to the previous Windows versions, there are two options for solving the problem within a limited time frame:

• Rollback to a previous version of Windows, in case there was an upgrade from Windows 7 or Windows 8.1 to Windows 10.
• Downgrade to the previous version of Windows 10 if the update happened on Windows 10.

V this moment, you can roll back the system to the previous build within 10 days (previously the time period was limited to a month), from the moment Windows 10 was updated.

I have already covered how to return from Windows 10 to Windows 7 or Windows 8.1. In this article, we will analyze how to roll back the updated Windows assembly 10 to the previous version of the operating room Windows systems 10.

How to downgrade to a previous version of Windows 10 (1 way)

You can go back to the previous version of Windows 10 directly from the operating system settings.

To start downgrading Windows 10, follow these steps:

1. Enter the "Settings" of the operating system.
2. Open the Update & Security section and then Recovery.
3. In the "Revert to a previous version of Windows 10" option, click the "Get Started" button.

1. In the "Revert to an earlier build" window that opens, you must specify the reason why you are rolling back to the previous version of Windows 10.

1. After you put a checkbox in one of the items, click on the "Next" button that has become active.
2. The next window suggests checking for updates. Maybe they can fix the problem with Windows 10.
3. Click on the "No thanks" button.

1. In the What You Need to Know window, review the process for rolling back to a previous version of Windows 10. Note the following points:

• Rollback process to a previous version Windows will take for a while.
• You will lose any changes made to your computer after upgrading to the current version of Windows.
• Downgrading to a previous version of the operating system will not affect personal files.
• To avoid losing important data, please make a backup beforehand.

1. To start the process of returning to the previous build of Windows, click on the "Next" button.

Wait for the return process to complete.

How to rollback Windows 10 update (method 2)

The second method to revert to a previous version of Windows 10 is by using the Windows PE Recovery Environment.

On a running computer, press the "Shift" keyboard key, then click right click mouse on the "Start" menu. Select Shut Down or Logout => Restart.

In the Select Action window, click on Troubleshooting.

In the Diagnostics window, select Advanced Options.

In the "Advanced Options" window, click on the "Return to the previous version" button.

In the "Return to the previous version" window, click on the name account.

In the next window, enter the password for the account. If there is no password, leave the field blank. Click on the "Continue" button.

To start the process reset windows to the previous version, click on the "Return to the previous version" button.

How to extend Windows rollback period to 30 days

Microsoft has shortened the time a user could downgrade to a previous version of the Windows 10 operating system. There is a way to extend the return time to the previous version within the 30 days it used to be.

Prerequisite: there must be files on the computer Windows rollback to the previous version. Do not delete the system update files yourself.

During the first 10 days after updating Windows 10, you need to do the following:

1. Run Command Prompt as Administrator.
2. In the interpreter window command line enter the command and then press the "Enter" key:

The countdown to the end of the period starts from the moment the system is updated to a new version, and not from the moment the command is executed. A period of up to 60 days can be set (the number after “Value:”). All this time, the files of the previous version of Windows will be stored on the computer.

If, after executing the command, "error 1168" appears, then the time has already been lost, you will not be able to return to the previous version of Windows.

Conclusions of the article

If necessary, in case of problems or for other reasons, the user can roll back Windows 10 in order to return to the previous build of the Windows 10 operating system. You can use this opportunity immediately after updating the system, within a limited time period.

One of the Windows 10 restore options is to use system restore points to undo last changes in the OS, including system files and the OS registry. You can create a restore point manually, in addition, with the appropriate settings for the system protection settings.

This guide describes in detail the process of creating restore points, the settings required for Windows 10 to do it automatically, and how to use previously made restore points to roll back changes in drivers, registry and system settings. At the same time, I'll tell you how to delete the created restore points. Also useful:,.

In order to create a system restore point, on the same "System Protection" tab (which can also be accessed by right-clicking on "Start" - "System" - "System Protection"), click the "Create" button and set a name for the new points, and then click "Create" again. After a while, the operation will be performed.

The computer now contains information that will allow you to undo the last changes made to critical system files in Windows 10 if, after installing programs, drivers or other actions, the OS does not work correctly.

The created restore points are stored in the hidden system folder System Volume Information at the root of the corresponding disks or partitions, but you do not have access to this folder by default.

How to roll back Windows 10 to a restore point

And now about using restore points. This can be done in several ways - in the Windows 10 interface, using diagnostic tools in special boot options, in the recovery environment launched from a USB flash drive (if the computer does not boot) and in the command line.

The easiest way, provided that the system starts, is to go to the control panel, select the "Recovery" item, and then click "Start System Restore".

The recovery wizard will start, in the first window of which you may be prompted to select the recommended restore point (created automatically), and in the second (if you check "Choose another restore point" you will be able to choose one of the manually or automatically created restore points. Click "Finish" and wait for the system restore process to finish. automatic reboot computer will tell you that the recovery was successful.

The second method to use the restore point is with the help of special boot options, which can be accessed through Options - Update and Recovery - Recovery, or, even faster, directly from the lock screen: click on the "power" button at the bottom right, and then, holding Shift, click "Restart".

On the Special Boot Options screen, select "Troubleshoot" - "System Restore" (or "Diagnostics" - "Advanced Options" - "System Restore" in more earlier versions Windows 10), then you can use the existing restore points (in the process, you will need to enter your account password).

In case Windows 10 does not boot, you can still use restore points: for this you will need (which will have to be done on another computer), or. Using bootable flash drive, it will be enough to select the "System Restore" item on the second screen of the installer.

As a result, you will be taken to the recovery environment, as in the previous way and you will be able to use restore points even on a computer that does not start.

And another way is to launch a rollback to a restore point from the command line. it may be useful to you if the only working option Windows boot 10 - safe mode with command line support.

Just type rstrui.exe into the command line and press Enter to launch the repair wizard (it will run in the GUI).

How to delete restore points

If you need to delete existing restore points, go to the System Protection settings window again, select the drive, click Configure, and then use the Delete button to do this. This will delete all restore points for that drive.

The same can be done with the cleanup utility Windows disk 10, to run it, press Win + R and enter cleanmgr, and after the utility opens, click "Clean up system files", select the disk to clean up, and then go to the "Advanced" tab. There you can delete all restore points except the most recent one.

And finally, there is a way to delete specific restore points on your computer, you can do this using free software CCleaner. In the program, go to "Tools" - "System Restore" and select those restore points that you want to delete.

Video - create, use and delete Windows 10 restore points

And, in conclusion, a video instruction, if after watching you still have questions, I will be glad to answer them in the comments.

If you are interested in more advanced backups, you may want to look at third-party tools for this, for example.

All computer owners periodically face problems Windows work after installing the wrong drivers or making changes to the operating system. You can solve this problem by creating system restore points.

A Windows 10 restore point allows you to return your computer to the last stable state of your computer. Windows 10 saves a backup when creating a restore point system files... Thus, instead of completely reinstalling Windows after installing some wrong driver or catching a virus, you can simply roll back the system.

Restore points are created before installation Windows updates, as well as automatically with the frequency that you specify. The more free hard disk space you reserve for recovery points, the more recovery dates you will have to choose from.

The system allows you to manually create Windows 10 restore points. This may be required, for example, before installing programs that may in some way disrupt the operation of the system. In case something goes wrong, the owner of the computer can always roll back the system to the date when everything worked properly.

Please note that restore points contain only backups of system Windows files 10 that affect the loading of the operating system. Personal folders and files are not included in backups. If you also want to back up your personal files, then you need to make a complete system image.

Windows 10 recovery settings

In order to view the current recovery settings on your computer, right-click on the "Start" menu and go to "Control Panel".

Go to the "System and Security" section.

Go to the "System" section.

Click in the left column "System Protection".

The window that opens contains the protection settings for your disks. Disabled means that no restore points are being made for this disk, but enabled when restore points are being made.

In my case, restore points are made only for the C drive, on which the operating system is installed. In order to change the settings of the protection parameters, select the disk you are interested in and click the "Configure" button.

At the top of the window, you can enable or disable the creation of Windows 10 restore points, and at the bottom, indicate how much disk space you are willing to reserve for storing these backups... The larger you specify, the more recovery points will be stored. As this volume fills, old restore points will be erased to make room for new ones. Usually, it is enough to store 2-3 system restore points.

In order to free up space on your hard drive, you can click the "Delete" button to delete all saved restore points.

Create a Windows 10 restore point manually

In order to create a Windows 10 restore point on the previous tab "System Protection" click the "Create" button.

A window will pop up in which you must somehow name a restore point, in my case, for example, I named it "A restore point before installing an incomprehensible driver." In this case, the date and time of the point creation will be added automatically. After that, click the "Create" button.

The process of creating a restore point will begin. It usually takes less than a minute. Upon completion, the "Recovery point created successfully" window will appear (see the picture above). Now you can install that incomprehensible driver because of which I was worried and in case of problems, roll back the system using a restore point.

Setting up automatic creation of restore points

As mentioned above, Windows 10 automatically creates restore points before installing updates, and also gives you the ability to do it manually. But for a safety net, it makes sense to set up automatic creation recovery points at a specified time interval, for example, every day.

Right-click on the "Start" menu and go to "Control Panel".

In the "Control Panel" in the upper right corner, select "View" - "Small icons" and click on the "Administration" section.

Open Task Scheduler.

Click alternately double click mouse on the items "Task Scheduler Library" - "Microsoft" - "Windows" - "System Restore".

In the System Restore branch, an SR rule has already been created for creating Windows 10 restore points. We just need to specify the interval after which this rule will be triggered. Double click on the SR rule.

In the window that opens, go to the "Triggers" tab and click "Create".

In the next window, you can set the period when Windows 10 restore points will be created. You can specify daily, weekly, monthly, when the computer starts or when it turns off, and so on.

The period for creating points should be selected based on the reserved space on the hard disk for storing backups, since when this volume is full, the newest recovery points will erase the oldest ones.

After you have selected the period for creating recovery points, click OK.

Roll back Windows 10 to a restore point

Now that we have learned how to create restore points manually and automatically, we will tell you how to recover your system after a failure.

There are several ways to roll back the system using restore points - using Windows interface 10 using the command line as well as using diagnostic tools.

System rollback via Windows interface

Most easy way, this is when you can start Windows 10. In this case, we do everything as at the beginning of the article. Right-click on the Start Menu and go to Control Panel. Then go to the section "System and Security" - "System" - "System Protection". In the "System Protection" window, click the "Restore" button.

The Restore System Files and Settings Wizard will open. Click Next.

In the next window, check the box "Show other restore points". This list contains all possible points recovery. The left column lists the dates on which the restore points were created. The middle column contains a description so that we can identify the point.

As you can see in the screenshot below, a restore point called "a restore point before installing an incomprehensible driver" that I created in the second chapter of this article is listed as the last one created.

Finally, the right column indicates the type of restore point creation (manual, system, or installation), that is, under what circumstances the backup was created.

Also, you can click on the restore point of interest and click "Search for affected programs". The window that opens will display a list of programs that will be affected by a rollback to this restore point.

When you have selected a restore point to which we want to roll back the system, click "Next".

System Restore has been successfully used to troubleshoot Windows crashes and problems for many years. You will also find it in Windows 10; details on how to use the Restore function are described in the article “Windows 10 Recovery”.

But soon you will find out that Windows 10 includes many other useful tools designed to keep your computer functioning at the proper level and to fix problems that have arisen during its operation.

In the following sections, you will find a description of many of the new operating system tools, how and when to use them, and which ones are best for troubleshooting your specific case.

How to roll back windows 10. Resetting the operating system.

The rollback or reset tool described below allows you to delete all user data, including account settings, during a system restore, if necessary. personal settings and files. In such a case, after reinstalling Windows 10, you will receive a complete new computer, which has not survived important information its previous owners, and you do not have to worry about its safety. To return the operating system to its original state, follow these steps

1. Click on the button Start and run the command Options... The Settings application window will appear on the screen.
2. In the Options window, click the Updates and security... On the next settings page, go to the left pane and click on the section Recovery... In the right pane, find the Reset this computer subsection and click the Start button in it.

If the operation is continued, a window will appear on the screen in which you are asked to choose one of two methods to restore the original state of the computer.

3. Select one of the options and click on the button Further.

You are prompted to choose one of two ways to reset systems

• Save my files... This is the most common way to reinstall Windows 10 and keep your accounts and user data safe. In this case, you will need to reinstall everything separately installed programs(but not applications from Windows Store). After choosing this option, go to step 5 of the instructions.
• delete everything... In this case, all user files and account data are deleted from the computer, after which a complete reinstalling windows 10. You can start working on a computer from scratch. If you choose this method, go to step 4 of the instructions.

4. If you stopped at the complete deletion of user data, then specify whether you want to wipe the entire disk. As before, you are presented with a choice of two options.

• Just delete my files... If the computer will continue to be used in your home, then you can safely choose this option. In spite of complete removal personal data attackers equipped with special hardware and by software will be able to easily recover previously deleted user data and use it to obtain important information about the previous owners of the computer.
• Deleting files and cleaning up the disk... By choosing this option, you can safely sell your computer to others, even unfamiliar people. It is guaranteed not to contain any personal data available for recovery. And all because after deleting user files, the disk is additionally cleared of all information stored on it.

5. After choosing one of the above options, click on the button Reset... The operating system will start the procedure for deleting data on the system hard disk and then reinstalling it. After its completion, you will receive the computer in the state in which it was purchased - with completely "zeroed" Windows 10 settings. You can safely start working on your computer.

Reinstalling Windows 10 takes 15 minutes to an hour. After resetting the operating system, your computer receives new life, assuming full or partial customization.

Revert to a previous version of Windows

It was previously discussed that Windows users 7 and 8.1 get an unprecedented opportunity to upgrade their operating system to Windows 10 for free, but only during the first year of its sales. The question immediately arises: can you change your mind and return to the previous operating system after switching to Windows 10?

To restore a previous (original) version of the Windows operating system on your computer, you will need to go to the Update and Security category in the Settings application (as described in paragraphs 1 and 2 of the instructions above). But now, instead of going to the Recovery section, in the left pane, click on the title Reset this computer. Next, click on the Start button to initiate the transition to more old version Windows that was previously installed on your computer. Together with operating system all programs installed in it are restored, and files associated with Windows 10 are permanently deleted.