Starting the Windows 10 system recovery when loading. System rollback using diagnostic tools. Using file history

All computer owners periodically face problems of Windows after installing incorrect drivers or making changes to the operating system. Solve this problem allows the creation of system recovery points.

Point windows restoration 10 allows you to return the computer to the last stable state of the computer. When creating a Windows 10 recovery point saves a backup system files. Thus, instead of fully reinstalling Windows after installed some incorrect driver or ratified the virus, you can simply roll back the system.

Recovery points are created before installing Windows updates, as well as automatically with the frequency you specify. The more free space on the hard disk you reserve under the recovery points, the more recovery dates you will have to choose from.

The system allows you to manually create Windows 10 recovery points. This may be required, for example, before installing programs that can somehow disrupt the system. In case something goes wrong, the owner of the computer can always roll back the system on the date when everything worked properly.

Note, the recovery points contain only backups Windows 10 system files that affect the operating system boot. Personal folders and files are not included in backups. If you want to reserve more and personal files, then you need to do full image Systems.

Windows 10 recovery settings

In order to watch the current recovery settings on your computer, right-click on the Start menu and go to the Control Panel.

Go to the "System and Security" section.

Go to the "System" section.

Click on the left column "System Protection".

The window that opens shows the protection parameters for your disks. The status is disabled means that the recovery points for this disk are not made, but turned on when the recovery points are made.

In my case, the recovery points are made only for the C disc on which the operating system is installed. In order to change the settings of the security settings, select the disk you are interested in and click the "Configure" button.

At the top of the window, you can enable or disable the creation of windows 10 recovery points, and at the bottom specify which amount of disk space you are ready to reserve these backups. The larger volume you specify, the more recovery points will be stored. As this volume is filling out, the old recovery points will be stitched to free the place for new ones. Usually, it is enough to store 2-3 recovery points of the system.

In order to free up a hard disk space, you can click the Delete button to delete all saved recovery points.

Creating a Windows 10 recovery point manually

In order to create a Windows 10 recovery point on the previous "System Protection" tab, click the Create button.

A window will pop up in which you must somehow call the recovery point, in my case for example, I called it "Restoring point before installing an incomprehensible driver." At the same time, the date and time of creating a point will be added automatically. After that, click the "Create" button.

The process of creating a recovery point will begin. Usually it takes less than a minute. After completing the "Recovery Point Successful" window appears (see the picture above). Now you can install that incomprehensible driver, because of which I worked and in case of problems, roll back the system using the recovery point.

Customize automatic creation of recovery points

As already written above, Windows 10 automatically creates recovery points before setting up updates, and also makes it possible to do it manually. But for the safety net, it makes sense to configure the automatic creation of points recovery to the time you specified, for example, every day.

Right-click on the Start menu and go to the Control Panel.

In the "Control Panel" in the upper right corner, select "View" - "Minor Icons" and click on the "Administration" section.

Open the job scheduler.

Alternately click double-click Mice on the Point Planner Library Points - "Microsoft" - "Windows" - "System Restore".

In the System Restore branch, the SR rule has already been created to create Windows 10 recovery points. We can only specify the interval through which this rule will work. Click two times on SR rule.

In the window that opens, go to the Triggers tab and click "Create".

In the next window, you can set the period when Windows 10 recovery will be created. You can specify a daily creation, weekly, monthly, when you start a computer or when it is turned off and so on.

You should choose a period of creating points on the reserved area on the hard disk for storing backups, since when filling out this volume, the newest recovery points will wash the oldest.

After you have selected a period of creating recovery points, click OK.

Rollback of Windows 10 to the recovery point

Now, when we learned how to create recovery points manually and automatically, tell you how to restore the system after a failure.

You can roll back the system using recovery points in several ways - with windows interface 10, using the command line, as well as with the help of diagnostic tools.

System rollback via Windows interface

Most light wayThis is when you can run Windows 10. In this case, we do everything as at the beginning of the article. Right-click on the Start menu and go to the Control Panel. Next, go to the System and Security section - "System" - "System Protection". In the System Protection window, click the Restore button.

The system file restore wizard opens. Click "Next".

In the next window, put a checkbox at the show "show other recovery points". This list displays all possible points Recovery. The left column shows the dates of creating recovery points. In the middle column, the description is described so that we can identify the point.

As can be seen in the screenshot below, the recovery point called "Point Recovery to the Unclear Driver", which I created in the second chapter of this article is present in the list as the last created.

Finally, the right column indicates the type of recovery point (manually, system or installation), that is, under what circumstances a backup has been created.

Also, you can click on the recovery point of interest and click "search for affected programs." The window that opens will display a list of programs that will affect rollback to this recovery point.

When you chose a recovery point to which we want to make the system rollback click "Next".

In the last window, we must confirm the selected recovery point. After pressing the "Finish" button, the system will start the recovery process.

System rollback using diagnostic tools

If Windows 10 does not start and the desktop is not loaded, then the system rollback can be performed using a special wednesdays Windows 10 to restore the system. When the computer starts, instead of the desktop, you will see a warning that the Windows system boot incorrectly. Click "Additional Recovery Options".

In the "Advanced Parameters" window, click on the "Restore System" item.

You will fall into the already familiar window for selecting recovery points where you should choose the last stable state of the system and click OK.

System rollback using the command line

If working windows table 10 Not loaded, you can roll back Windows 10 to the last recovery point using the command line.

To do this, during your computer, press F8 until you appear a list of computer boot options. Select "Safe Mode with Command Line Support".

In opening command line Write rstrui.exe., After that press ENTER.

As a result of this command, you have to start the standard system recovery wizard to the recovery point in the graphical interface.

Video on the topic Creating a Windows 10 recovery point

Well, finally, I suggest you to see a few videos, how to create a recovery point and produce windows rollback 10 to the last stable version.

If Windows stopped downloading, then to restore correct operation, you can use standard utilities.

One of the main nightmares of lovers computer equipment - It is encountered with the situation when the device cannot be turned on. The operating system begins to load, but ultimately gives the message, like: "Failed to configure Windows Updates, Change changes, do not turn off the computer." After that, nothing new happens - it fails to restore the software, and the load does not help hard. The best antivirus for Windows 10 best antivirus for Windows 10 viruses and all kinds of spyware are the most common causes of problems with PC. We understand how to defend. More details

System recovery tools

Before the release of Windows 7, such a situation turned into numerous dances with a tambourine, and often at all completely reinstalling the operating system. Now everything is different, and often the problem is solved by standard means from Microsoft, which do not even need to specifically install. The task is to ensure that in principle should be aware that such a toolor exists, as well as to a banal matching about him, when "irreparable" happened.

The trick is that when loading a computer, before the appearance of icons. windows downloads, Have time to get into the advanced parameters of this download itself, where it will be possible to start the diagnosis and, if necessary, to restore the system to the selected checkpoint. In Windows 7, the load required to press function key F8, after which you select the "Troubleshooting" option (although in rare cases saved the option "last successful configuration»).

Additional options for Windows 7

Once in the "System Recovery Settings" menu, in most cases the salvation became one of the first first options. "Launch Recovery" could save Operation in automatic mode, And "System Recovery" required you manually select a checkpoint to which rollback will be carried out.

Windows 7 system recovery parameters

Reserve copy of Windows 10 Backup copy of Windows 10 To in the event of a malfunction of the operating system, it was possible to restore it to the initial state, you need to make a recovery disk in advance. More Microsoft would change yourself if all useful tools in the old age would have left the update of his brainchild. Restoring the Windows 10 system is carried out by pressing "hot keys" SHIFT + F8, and, unlike the "seven", press this combination is needed very, very quickly, since the OS itself began to boot where how rapidly.

Windows 10 boot options

Underwent changing I. appearance Saving menu. By selecting "Diagnostics", in the "Additional Parameters" there are already familiar to us "Restoring System" and "Recovery when loading" (only in a different order). There is also the option "Return to the previous assembly" if you are updated to "dozens" with one of the previous versions of Windows.

Advanced Windows 10 boot options

If automatic recovery did not work

Restoring the Windows system to one of the past control points - the task is not complicated. It is only important that these points themselves in the system have, because sometimes users themselves turn off their creation, at the same time removing the available. Old checkpoints, indeed, periodically makes sense to clean, as they occupy a lot of space. But to give up recovery points at all - the risky occupation. Secure Internet via DNS Safe Internet via DNS How to move on the Internet and do not grasp the viruses? Secure DNS servers will help. More details to make sure that you automatically create recovery points or make changes to the appropriate settings, it is required in the "Parameters" window to select the "Large Icons" icons (or small, but non-categories) icons and select "Restore". There already choose "System Recovery Setup", whether protection is enabled and use the "Configure" button if necessary. Here you can manually create a point for subsequent recovery.

Restoration windows Computer 10

Windows 10 recovery points

If we have the recovery points, we use the method described earlier, that is, using the built-in windows To restore the system, you can quickly roll back to an earlier condition of the computer, while not losing important files.

Creating a Windows 10 recovery image

In the extreme case, you will have to restore the system to the initial state or by the pre-created image image. "System Image" and "System Recovery Disk" It is advisable to create in the working state of the operating system, after you installed all applications you need. It is all done through the same "control panel" (they are "parameters") when viewed by "categories" by selecting "Backup and Recovery (Windows 7)". Here you can restore the operating system to the previously created image, if the computer still loads, but already stopped working as it should. We limit the tracking of Windows 10 limit Windows 10 tracking with each release of the operating system Microsoft requests more and more information from users. But you can temper her appetites. More details

Restoring laptop to factory installations

If a standard means You do not help, and disk or USB devices with a way for recovery you do not have, then laptop owners can use the hot keys to run the built-in recovery utility. Some models can even have a separate key for these purposes, for example, Onekey Recovery from Lenovo, but it is rather an exception. In other cases, it is important to know which one " hot key»For your laptop, since manufacturers it has a property to be different.

Hot Keys for Laptop Manufacturers:

F3 - MSI; F4 - SAMSUNG; F8 - Fujitsu Siemens; F8 - TOSHIBA; F9 - ASUS; F10 - Sony Vaio.; F10 - Packard Bell; F11 - HP Pavilion; F11 - LG; F11 - Lenovo Thinkpad.; Alt + F10 - Acer (Before you choose in BIOS - Disk-to-Disk (D2D)); Ctrl + F11 - Dell Inspiron.; Click - Rover.

The factory utility will restore the device to the initial state, as if it is just from the store. This will remove all programs with settings, all files, including favorite photos, which it is for such cases it makes sense to store in cloud services. However, the device will again be able to work, and in some cases this method elementary will help prepare a laptop to subsequent resale or transfer to relatives.

pcGraMota.ru.

Five Windows 10 Recovery Recovery Methods (Step-by-Step Guides)

Windows 10 Also, as the earlier OS may be subject to, for example, viral attacks or system errors occur. In this regard, the Microsoft specialists provided their Windows 10 special built-in functions so that you can perform fast recovery operating system, allowing you to effectively return it to an efficient position. Among these funds are in the novelty, as well as those already experienced ways of resuscitation OS, for example, using the previously created recovery point or recording the image of the entire OS on external carrier, but also have some advanced methods as creating a USB Especially for the possibility of recovery.

This article details Windows 10 describes five methods providing rapid restoration of it when the system fails. The first three methods should be applied in case of not particularly difficult situations, and the last two will effectively help even in cases where the system cannot be loaded. The clean installation of the system will not be considered here, since it is already referred to the fundamental methods and even in its essence can no longer be referred to as the method of recovery, since the OS will be installed "from scratch" (with formatting system partition hard disk).

1 Method: Using a refund point to an efficient state

It is provided that in the automatic windows mode 10 Like its previous versions, after certain intervals, it creates points for its restoration. But at any time, the user is always available to save such a point in manual mode. For example, before carrying out any important adjustments to the system or before installing applications and special software.

The main advantage of 1 method is that after the procedure all information in the user's computer is saved and the software installed later will be installed later than the recovery point.

If the user became interested in the question: "How to restore the OS using 1 method?", Then the algorithm of action is as follows:

2 Method: Rollback to the factory status

The "dozen" appeared a function that allows you to return the PC to the factory settings. This method provides the ability to produce a total system rollback or without affecting the personal information of the owner of the stored computer.

How to restore the OS through the reset function? This requires the following sequential steps:

3 Method: Using backup file creation features

In Windows 10, there is a convenient feature of the "File Story", with which the user can independently or, setting in the settings automatic execution, Create backup copies of information stored in PC. This requires only to enable this setting and show that it is necessary to reserve. The time interval through which you want to create copies of files are specified in the settings. This in the event of a failure or errors in the OS, will allow you to quickly and not investing special work, return its information and resume full-fledged work with them.

4 Method: Through the Creating a USB Disk

In cases where the OS does not start at all, the first three methods will not be able to help. In this case, it will be necessary to use the disk of recovery, allowing to use additional features Downloads.

The algorithm of action consists of the following steps:

5 Method: Use of bootable media with windows 10

In the absence of a predetermined recovery disk and if it is impossible to download PCs, you will need to use the bootable carrier with Windows 10 to restore the system. The loading (installation) media is created on the USB flash drive or on the DVD disk.

The sequence of the steps is as follows:

Windowstune.ru.

Restoring Windows 10 System

• 1 Create a picture
• 2 Restore
• 3 if not loaded

Windows 10 is under continuous testing. And this means that errors periodically pop up. It is not wonderful that the restoration of Windows 10 in such conditions is the necessary process. Problems arise due to the implementation by update developers. After all, all this bunch of applications and equipment that exist on the market should be adapted to the requirements of the new operating system.

Create a picture

You can imagine that the return of the computer to the previous state is a jump in time. Windows 10 In addition to our desire, automatically photographs your configuration. Similar memory fragments have important files and drivers in working versions. So for Windows 10 it is very important to take a snapshot before installing any software. The user can make such an operation independently.

To do this, click on the Start menu and select the control panel.

After that you need to click on the System.

Go to a new window and click the system protection.

We check such a parameter as the section for which Windows 10 Recovery is enabled. We put the cursor on this section, select it and click to configure.

In the next window, you need to put the point opposite to include system protection. For the repository of all of our recovery points, it is recommended to allocate about 15%. Next, you need to click OK.

Realizing that the recovery point is created on the C drive, begin this process.

Restore

So, let's say that something bad happened. For example, a virus or a new program hit the computer and has greatly influenced its work. In this case, it is used to roll back to past pictures.

Click the Restore button in the system properties window.

Look more: what is the trick in updating to Windows 10

Then Windows 10 will offer us to choose any status snapshot. For example, we can dwell on the fact that created themselves.

If not loading

And if everything is completely bad, and Windows 10 is not even loaded, you can try to restore it before inserting boot disk. Such a disc can be created on the basis of the DVD medium. For this purpose, we will help us the usual Windows tools.

• Press the Start button.
• Then select the control panel.
• Next, click on the system and its maintenance.
• Then select archiving and recovery.

On the left side of this window will create a system recovery disk. You just need to follow the instructions. Naturally, such operations must be done before, even before the fatal problems with the computer begin. After it turned out to create a disk, you need to use it competently.

• Insert Disk B. dVD drive Patient Computer.
• Restart the machine using a special button on the housing.
• If you are not uploaded from the disk, then go to the BIOS and display upwards menu Boot Download from DVD.
• In the loading menu you need to select the recovery option and click Next.

That's all, as you can see, there is nothing to be afraid of the failures of the computer. There are both automatic conservation and manual methods of archiving of the holistic software of the software. If you do everything competently, it is enough just to click on several buttons a couple of times and make a rollback to the working windows version 10. Windows 10 Recovery will always save us.

(Visited 1 924 Times, 1 Visits Today)

windowsProfi.ru.

Windows 10 Recovery

Let's try to recover Windows 10 and deal with many options in ascending order of their complexity. Actually, they have a lot of common: in all cases without exception, in addition to the full recovery of Windows 10, we will need a backup copy.

To begin with, the most important files and documents, and ideally - the entire system disk ... To ensure reliability of the system, we need to protect the most important drive with you - the first, system, as well as our user information, that is, documents. WINDOVS 10 restoration can be made in several ways:

1. Computer refund B. the initial state
2. Using file history
3. Using recovery points
4. From the image of the system
5. Using recovery disk

How to restore Windows 10 to the original state

First of all, you need to pay attention when we want to restore Windows 10 to the original state, it is the "Restore" function. To do this, open Settings \u003e\u003e Update and Security \u003e\u003e Recovery and click "Start".

Here we offer two options. Return the computer to its original state. "Reset" system with removal of all installed programs, With the maintenance of personal files or without it. TO last to medium It is worth resorting only in emergency cases... and in the presence of a backup of all valuable information.

Special download options. Finally, other operational recovery operations can be done by reloading the computer in a special "restorative" mode - we will return to this.

The last item of this menu offers a clean Windows installation using new program Refresh is the same reset, only with subsequent reinstalling Windows 10 with automatically downloaded from the "Distribution" network. In this way, we will use only in cases where the usual "reset" will be impossible.

In both cases, pre-take care of backing up your documents and photos - if they are, of course, are stored not in the "cloud", as I advised you, and not on separate disk. Remember: the system reset only affects the main, system drive, all other drives in your system remain safe.

Disk recovery

If the computer refused to start, then the installation disk or disk recovery, which we created earlier will come to the aid. See: How to create Windows 10 recovery disk. To start with a removable media, you must perform some settings. You need to use Boot Menu to download the download from the USB Flash Disk, only then we will have booting from the recovery disk.

After hitting the recovery environment, multiple system restore tasks will open before you, even rollback to the initial state, if other methods do not help.

Windows 10 recovery mode

You can roll back to the previous "recovery point" even if the computer is not loaded at all. In such cases, after several failures, the computer is automatically loaded in a special recovery mode of Windows 10, where you can "get" from any saved snapshot.

How to start recovery mode? Restart the computer and using special teams: Parameters \u003e\u003e Update and Recovery \u003e\u003e Recovery \u003e\u003e Special download options. If you saw this picture after restarting the computer, you can first try to click on the first item and continue the download in normal mode. If it did not work out - we are direct road to the Troubleshooting section.

In this menu, we will find many useful teams that will help us in case of failure. For example, download in safe mode, with a minimum of commands and affects. In safe mode, you will have to do only to standard drivers and programs ... But this is necessary for us! This mode can be used if the system "hangs" at the last stage of loading, after the appearance and disappearance from the logo screen. Most often it is because of the problems with drivers or some programs in the autoload menu - in safe mode They will not run, so you can, with some experience, catch them and remove them. But the most important partition with recovery tools will open when you click on the F10 key.

Thus, we get access to download management - an unusually powerful tool that will come to help in case of various errors. Here the system will offer you to "reset" to a state of a clean system - either with saving your personal files and settings, or completely. Of course, this method is too radical for simple failures - it will correct, it will correct, it is undoubtedly, but it will destroy all the programs installed on the computer. Well, we will leave this recipe for the most extreme case and click on the link additionally: there is another one for us. "First aid kit."

This is much more interesting: To begin with, we can try to eliminate the download problems (if any) - the Recovery Recovery tool will help us in this. It does not affect their personal data or installed programs, checking the integrity of system files and a number of drivers. Alas, with the greatest failures, this repairman will not help us, but it is worth at least try.

The Windows 10 restore tool will allow you to roll back to the saved "recovery point" (we will tell about below). I remind you that such "points" with a snapshot of the registry and other important system files creates automatically when installing new programs ... But you can do it and manually - let's say, some potentially dangerous software.

Finally, the download parameters menu will allow you to restart in "safe mode", without starting most of the drivers of devices and programs from the autoload list. It can help you when problems with video payment drivers or antivirus: Potentially, they are most often "hanging" the system at the start.

As you can see, the capabilities of the download menu are large enough to eliminate most of the problems with Windows 10 - although I sincerely hope that you will never have to see it on the screen.

And at the same time I remind you your favorite way of resurrection of the system of the dead for the most difficult failures, up to a complete failure of a hard disk - recovery from the image, a backup, saved on another hard disk (best - external). I will immediately say that the Windows itself can create such "images", and the image recovery command is not turned on in the download menu. But this is exactly the case when without hesitation it is worth choosing a separate program for this work, whether it is free of free Rescue Kit on Paragon or talented in all respects, but hopelessly paid Acronis True Image.

Recovery of Windows 10 from the image image

If we have a copy of the image image, then when the time comes to make the recovery of Windows 10 from the image, will not be difficult and we can restore the computer in a few minutes and at the same time we do not have to install all programs. In order to restore the system partition from the image, you need to start the computer in the recovery environment: Parameters \u003e\u003e Update and Recovery \u003e\u003e Recovery \u003e\u003e Special download options.

After entering the password accountYou will need to choose the image of which will be restored by the system distribution.

After simple manipulations, the system will warn: all data on the drives restored will be replaced by data from the image image. We click "Yes" and wait for the completion of the process. After rebooting the computer, you will see that the system looks like what you did at the time of creating an image. See Article: How to create a Windows 10 image.

Point of recovery

Creating "Recovery Points", that is, backup copies of configuration files and important system files. Places they occupy a little, but will allow you to reanimate the system in the overwhelming majority. Windows periodically (usually at the time of installing new programs) creates instant "snapshots" of the system status. And if at your disposal there are several such "points", you can return the system "Back to the past". And not until the birth of life on your computer, and only for a day, others, until the appearance of the "glitch".

To do this, we need to go to the old menu for restoring the control panel system (section System and Security) - you already know what the easiest way to get to it by typing the word "recovery" in the search bar.

Click on the "Starting System Recovery" line - the "Calendar" will open before all the recovery points will be listed. And at the same time - both programs, before installing which they were created. And if you know exactly what your system "instructed" the video card driver is just enough to find its name in the list, and roll back to the date preceding it.

One subtlety: By default, the recovery point system in Windows 10 is disabled. And if you are going to use it, then when you first start a computer with a "fresh" system, it must be enabled and configured. This is done in the System Recovery Setup menu: Please note that for each disk on your computer it turns on separately (if you are somewhat on your computer, I recommend that you limit only by system). In addition, you can configure the amount of disk space allocated for storing "points" - the more you select the place, the more "points" can save the system.

With the help of the same menu, you can create a manual recovery point (although the configuration automatically "backups" by the system after installing important updates or programs, so you have to resort to this operation more frequently). See Article: Recovery Point in Winows 10

Procedure of Windows 10 Removing: In case of failure, you can easily return the system in previous Condition

Using file history

Documents and photos Better from the very beginning to store in the "cloud", that is, not in the folders on the desktop, as we used, and in the Dropbox or ONEDRIVE storage (if you are more convenient, create for these folders "Labor" on the desktop) . See how to use cloud storage.

If you do not trust the network, store them in special documents folders, and turn on ONEDRIVE backup in the system settings, and if there is a separate drive (for example, an external USB hard drive), use backup using the file history.

Unfortunately, this method protects only your information, but not system files, restore Windows 10 after a failure it will not help.

If you are interested in restoring Windows 10, then you hit the address.

We'll figure it out how to return the performance of Windows 10 without using third-party programs.

System Restore

This option will help correct the errors that appeared after installing software, Windows updates, changes in the registry and such actions.

The resumption feature allows you to return the registry settings and protected system files to the previously saved state - to one of the control points that Windows creates automatically.

User documents are not affected.

Regeneration points in Dozens are created before installing programs, drivers, system updates or just once every 7 days. In addition, the user can create them manually.

Procedure

• Go to the control panel, open the "Restore" applet and select the "Starting System Recovery" commands from the list.

• Select the checkpoint created before the failure, and click Finish.

• During the task, the computer will be rebooted. After 5-7 minutes, Windows 10 will return to the state, which preceded the problem.

The resumption of the system is available and then when Windows 10 does not start. If you violate the download instead of the welcome window, you will see the following:

By pressing the "Additional Recovery Options" button, you will be selected from the action. Here you need to click the item "Diagnostics".

After that, you will find a familiar window with a proposal to select a checkpoint. Follow the instructions and wait for the wizard's end.

Restoring a computer in the original condition

This option will help cope with errors that do not eliminate the resumption function, as well as in cases where suitable control points are missing or not created.

Restoring Windows 10 to the original state can be performed:

• With the maintenance of user files and rows preset programs. In this case, everything system settings, driver and software, user installedwill be reset.
• Without saving personal data, programs and settings. This option returns the system to a state, as after a clean installation. No custom information It will not remain in it.

Important! On computers and laptops, where Windows 10 has been installed by the manufacturer, the third option can be accessible - recovery to factory settings. At the same time, not only data and user settings are deleted, but also the contents of unsystematic hard disk partitions.

Return to the factory state without storing personal information is used as an extreme measure - alternative to reinstalling the system with difficult to store failures, as well as before selling a computer or transferring it to another user.

Procedure for returning Windows 10 to its original condition

• Open the Start menu and click the "Parameters" button.

• Select "Update and Safety" options.

• Next, select Restore.

• In the "Return Computer To Source Status" section, click the Start button.

• After that, select the option you want: "Save My Files" or "Delete All".

After about 40-60 minutes, Windows 10 will be in the ranks again.

Rollback to the previous version of the system (Windows 7 or 8)

This method is available only to those who installed the "dozen" in order to update the previous OS - "seven" or "eight". And it is possible only within a month after the update.

This will save user files in personal folders, drivers, software and previous system settings, and everything that was in Windows 10 will be deleted.

To roll back to the initially installed OS, start the Settings application from the "Start" menu, open "Update and Security", then "Restore" and select "Back to Windows 8.1 (7)".

If there is no function in the list of parameters of this item, it means that the function is not available. It will also be unavailable if the user deleted the Windows.old folder from the system partition of the hard disk.

Reinstall Windows 10 from recovery disk

This option will be useful to those who have created a regeneration disk in advance. It retains a backup copy of the system with operational parameters.

To create a recovery disk, you must perform the following:

• prepare a clean DVD or USB flash drive (the minimum storage capacity is determined individually) and connect to the computer;
• open in the Control Panel "Restore", select the "Creating Recovery Disk" item and follow the instructions.

The finished medium with a backup copy of Windows needs to be stored in a safe place and not to use for anything else.

How to restore Windows 10 from backup

If the system is loaded, open the "Parameters" application -\u003e "Update and Security" -\u003e "Restore" and "Return a computer to the original state."

After rebooting to Recovery Wednesday, select "Diagnostics" and "Restore System Image".

Tip! If the system is not loaded, you need to start a computer from the disk with a distribution room, but instead of installation (install now) select "Repair Your Computer" (REPAIR Your Computer).

• Select the system image for the desired number.
• If necessary, specify additional parameters, for example, disk formatting.
• Confirm your consent to rollback and wait for it.

Will be executed automatic recovery Windows with saving user files, software and settings. The system status will be the same as when creating a backup.

Windows 10 boot restore

The resumption of Windows 10 bootloader is also performed by running a PC with installation disk "Dozens".

Procedure Next:

• Connect a drive to the computer with a Windows 10 distribution.
• Instead of installation, select "Restore Computer".
• In the "Select Action" window, click Diagnostics.
• Next, in the list of additional options, select "Restore when loading".

In some cases, automatic startup recovery does not give results. Then can help manual overwriting of the bootloader files and the loading section of the hard drive. How to do it:

• Open the command line in the Advanced Settings window.

• Follow the instruction bCDBoot.exe X: \\ Windowswhere X:- The letter of the system partition on the hard disk.

In the Recovery environment, the letters of sections often do not match those that are assigned to Windows. To determine them, you can use the console utility Diskpart. From the system distribution.

Dial in the command line alternately:

Diskpart.

LIST DISK.

SEL DISK 0. (or 1, 2, 3 - depends on where the loader is located if there are several physical drives on the PC)

Detail Disk.

In our example, the boot partition is assigned a letter C, which means that the recovery command is written as follows: bCDBoot.exe C: \\ Windows.

To correct the load failure on hardware with MBR markup, you must perform 2 more commands in the console: bootrec / fixmbr and bootRec / FixBoot.The code of the boot partition will be overwritten.

How to restore Windows 10 system files

To restore protected system files in Windows 10, uses the application SFC.exe.running on the command line with the parameter / Scannow.

Scanning and fix lasts about 20-40 minutes.

Upon completion of the SFC, a report will be created (CBS.log), which is stored in the C: \\ Windows \\ Logs folder. From it, you can find out which files were damaged and restored.

Windows 10 Recovery

Despite the fact that Windows 10 is characterized by high performance and stability, it may need to restore

You can restore Windows 10 even without using a boot or installation disk. Of course, if the function of creating test points is deactivated, if there is no hidden factory partition on the HDD with a clean distribution system to return to the initial state or the HDD itself has failed, then without the installation drive, it is unlikely to do. Next, we will tell when you can restore the OS without a disk, we will also consider how Windows resuscitation is performed in this case.

Return to a previously saved state if Windows is loaded

Sometimes when updating OS, installation of various software, updating drivers, etc. The operating environment may fail. Sometimes it is loaded, but it works with errors, sometimes the download does not occur at all. If the OS flies not completely, return the performance of the "dozen" without a disk is the easiest way straight from the Windows 10. This is done on the following algorithm:

Note that only the critical files and settings will be changed to work. Custom data and documents will not be addressed by this action.

Restoring OS without an installation drive if it is not possible to download it

Use the functionality of the test "cast" status of the most important files and settings, even without a disk, can and if the computer cannot boot. Usually, the user in such a situation on the screen sees no greeting window, but a blue window offering two options for further action:

• reboot
• go to optional action options to restore OS.

It is clear that the reboot case is unlikely to help, so choose the second option. In this case, the window selection window, which we need the point in which is "Diagnostics". Here the user will need to choose the very first partition that allows you to restore Windows. Next, the previously described utility will appear, which allows you to select the desired point of saving the main parameters without using the boot disk.

Returning the initial system

If a rollback to the previous control points does not give the desired result - Windows does not work with failures or is not loaded at all, you can cope with the problem by resorting to the function returning Windows to the initial state. Three options for rollback OS are possible:

1. With the maintenance of all user documents and pre-installed in the program operating environment. Settings for the same system together with software and drivers that the user installed will be reset.
2. The following option does not provide for already saving documentation, photo and user files in the location of the disk with files installed system. OS status After performing such a rollback will be such as you can observe at the end of the complete reinstallation of Windows.
3. If Windows 10 has already been pre-installed on a laptop or Windows 10 PC, then the hidden section of the disk with the installation distribution must be located on such a computer. This information can be used for the most rigid environment resuscitation mode - return to factory settings. In this case, data and documents of the PC owner are deleted, but even all information in the extra-system disk sections.

The last version of the system reanimation can be used as an extreme measure with the most severe failures, when other methods are ineffective.

How to return the operating environment to the source settings

If the OS flew finally, it is necessary to roll back and restore it to the source state, the following steps must be performed:

All Microsoft operating systems provide various means of restoring the system. In his new operating system, the company provided more possibilities To restore Windows 10. When you delete system files, an inexperienced user may need to restore the system, as well as in many other cases when the OS works unstable or does not start at all. In this material we describe all available tools for restoring the Windows 10 operating system, as well as describe how to use them, and on what principles of work they act.

Restore Windows 10 using new operating system capabilities

As is known to many PC users with the Windows 10 operating system, which is implemented in it two control panels computer. The first is all familiar " Control Panel"And the second is new" Parameters" In this example, we will use the new panel " Parameters" You can get into the new panel through the menu " Start", Clicking on the item" Parameters"Or via the notification area by clicking on the button" All parameters».

Hitting the panel Parameters", Further step will be the transition to the" tab " Update and security» - « Restoration».

Now in the window that opens, we are interested in the only button to start. By clicking on this button, you will open the selection window.

In this selection menu, the user offers two options: save or delete personal data. First option fully saves all user user files and fully cleans the system. Second option deletes all data on a computer, including user files, OS settings and all applications. In our case, we choose the first option " Save my files" After this, Windows action will display a message about which programs will be removed from PC.

The message is also mentioned if your applications are installed from the Windows 10 store, you can quickly restore them, including their settings. In the last window, the wizard will warn you what actions will be taken. To confirm reset Windows 10 In the initial state, press the corresponding reset button.

This method is very convenient when you need to reinstall Windows 10 without an installation DVD or when not at hand boot flash drive. Judge yourself, at the end of this discharge on your personal Computer There will be a pure ten, including only personal data.

Restoring Windows 10 using recovery disk

Now consider the example creating an optical recovery disk dozens. To make this disc, we need a clean DVD and a PC with a DVD drive. Now let's go to the usual panel windows management To create it. Find and open the control panel, by clicking on the menu " Start»Right-click and choose the option you need.

In the panel itself, you must follow these links to " system and safety» - «».

In the wizard there is only one button Create a disc. Therefore, after pressing it, the disk recording immediately starts.

Now let's try to boot from the newly created disk. To do this, insert it into the drive and choose it when loading Boot Menu Bios.

If you select "Select" Diagnostics", Then we will fall in the menu" Extra options»Recovery. In this menu you can restore the bootloader or the image of the OS. In addition, you can call the command line in the administrator mode, in which there are many commands to restore the system. You can also call the checkpoint recovery wizard. Especially interesting is the use of the command line in the administrator mode. Using the command line in special privilege mode, you can run, for example, a console program BootRec. In the command line, the BootRec utility can write a new boot sector. Also in the BootRec command line knows how fix MBR record, as well as search lost windows installations that BIOS does not see when downloading a computer.

Full restoration of dozens through the image

For this example, we use the prompts of the previous one and go to " Control Panel"According to the same links. Now on the right side of the box panel by clicking ". Such an action will launch the wizard in which we will create the image of the entire OS.

As in the previous example, we will apply optical disks To save information. In our case, this is one Blu-ray. Digger. You can save the image on the usual USB flash drive. Saving a USB flash drive is especially true for computers that do not have optical driveMoreover, the price of a large volume flash drive is now very low. Now continue the work of the master.

In the wizard window that appears, a message appeared that 46 gigabytes may be required to archive to the image of the entire system. By pressing the archive button, the OS archiving preparation will begin into the image and write it to the DVD.

The saved image can be started as in the supervision of the control panel and directly from the DVD when the computer is loaded.

This example will be particularly interesting to system administrators who need to quickly restore jobs and do not bother installing drivers and various programs.

It is worth noting that you can configure automatic backup creation Archives.

The setting is carried out in the same control window where the master started using the link " Tune backup " Setting is very simple. After selecting the location of the archives, be it external storage Or network resource, the system will automatically make backups. Automatic archive creation prevents you from data loss if the hard drive broke, so it is worth paying attention to it.

Control Points

Restore Windows using the control point It was possible in Windows XP. In the top ten, these points are the same as in Windows 7 and 8. The developers did not even change the interface of the dot recovery wizard. It is also worth noting that the developers have disconnected automatic creation of control points (in the seven it is enabled by default). To enable automatic creation of recovery points, just go to " Properties of the system»On the tab" System protection" You can easily move there using the SystemPropertiesProtection command in the standard program "".

Having hit the desired tab, you need to click on the button to configure .... This action will open the window in which you want to enable system protection, as well as specify how much gigabyte on the screw can be used for all points in the OS.

As can be seen, the protection is simple enough. Immediately after this, the system will start automatically create control points.

The Windows 10 operating system does not make the recovery points spontaneously, and solely with some event.

For example, you installed the driver sound card in OS or installed heavy software. Also besides automatic creation You can make points in manual mode. To do this, find the button with the name to create a button on the same System Protection tab. By clicking on this button, we will run the Wizard for creating recovery points. First of all, enter the point name and click the Create button.

The creation time of each point in manual mode depends on the amount of installed programs and OS settings on the computer. Rollback to the previous point is carried out by calling the wizard using the restore button ....

In the next wizard window, you can detect all the created checkpoints, both automatically and in manual mode.

By selecting one of the points, you restore your OS state at the moment when the point was created. This type of recovery is especially it is convenient to use when the operator works unstable, constant hangs are observed, death screens and spontaneous reboots. In addition to restoring with the help of a wizard from under Windows 10, you can use the disk of recovery if the OS does not want to start.

Advanced PC users will also be interested in creating points with PowerShell In admin mode. The operation of the PowerShell console in the administrator mode is demonstrated, where the command is executed: checkpoint-computer -description "InstallableBetamicrosoftOffice"

This command creates a recovery point named "InstallBetamicrosoftOffice". When creating control points with using PowerShell It should be waited until the console fulfills the command, but if this is not done, the test point will not be created. And run PowerShell in the administrator mode simply. It is enough to find it in the search engine and select the right-button item " Run on behalf of the administrator" Also PowerShell can be immediately run via the command line that is running in the administrator mode. To do this, in the command prompt, you just enter the command " PowerShell».

It is worth noting that in Windows 10 it is not possible to delete a specific checkpoint, and only delete everything at once.

Such a popular utility will come to the rescue in this situation as CCleaner. CCleaner program can remove unnecessary control pointsThereby freeing a lot of hard disk space.

Finally

Examples considered see that the developers new Windows 10 We decided to leave most of the built-in recovery features that were in the previous OS, and also complemented the system with new ones. Besides standard methods Recovery We advise our readers to still pay attention to such a program as Acronis True Image 2017.

\u003e\u003e Download Acronis True Image 2017
This program can quickly make backup copies of the entire OS, and also quickly restore it. A distinctive feature of the utility, except for rich functionality, is cloud storage Data. That is, you will not need to save backups on an external disk. Also using Acronis True Image 2017 encrypt all archives 256 bit key that provides increased storage safety.

Video on the topic