How to go to the secure mode of Windows 7. What is a secure Windows mode? Boot UI TUNER - the easiest way to boot in safe mode
Safe mode SAFE MODE) is a diagnostic, debugging option operating system. They use in case of failures in the work, hang or the impossibility of booting Windows. Since such problems arise mainly due to incorrect work installed applications And drivers or making on the computer malware, then safe mode in such situations may be very by the way. In this mode, the operating system starts with a minimum of basic components, while the remaining system services, as well as software installed And the drivers remain inactive. This can help detect the method of excluding the cause of the failure and remove the conflicting or malware from the system, which is in inactive state. Also safe mode is used to correctly roll back the operating system to the recovery control point, reset the administrator password (if it is possible in the main mode), access to the files locked in normal mode and folders and solve many other problems.
Options for safe mode
Safe mode (most frequently used option, starts the system with a minimum set active ingredients and support graphic interface);
Safe download mode network drivers (similar option with additional support for work on local network and Internet access);
Safe mode with support command line (Runs a system without a graphical interface, all operations are performed through commands in CMD, the Explorer.exe command is used to return to the graphic shell mode).
How to run safe mode
In order to enter the Safe Mode (Safe Mode), you can use one of the following methods.
1. Through the additional download options menu.
Restart the computer by clicking on the menu icon Start → Completion of work → In case the computer hoves, click Reset. For forced reboot or hold the power button Power To turn off the PC, and then re-enable.
During the restart (immediately after the initialization of the BIOS), press the key several times. F8. To enter the menu.
Attention! On different motherboards Different keys can be used to enter the download menu.F1- F12., Del. other. Keyboard combinations can also be assigned, for example,Shift. + F..., Ctrl + F...., FN. + F....
After entering the menu Additional download options Select the appropriate security mode using arrows and ↓ on the keyboard and click ENTER.
After that, Windows will boot in safe mode. To get out of it, you need to restart the PC again.
2. Through Windows Settings (System Configuration)
Click on the menu icon Start (You can also use a key combination Win + R.), in the appeared string, type the command msconfig and press ENTER.
In the window that opens system configuration On the tab General Note the option Diagnostic launch.
To exit the secure mode, repeat the actions described above by selecting the option. Normal launch and removing the checkbox from the option Safe mode. Confirm the operation by clicking Otherwise, the computer will continue to boot in safe mode!
3. Through the command line (CMD)
Click on the menu Start And in the appeared string, enter the command: cmd. . Run the command line with administrator rightscalling the right mouse button on cmd.exe. and choosing the option Run on the name of the administrator.
In the command prompt window, enter the command: BCDedit. and press ENTER. After the system is issued by the PC configuration information, pay attention to the section. In this section you need to remember identifierSince it will be used when making commands for running a secure mode.
bCDEDIT / SET (Identifier) \u200b\u200bSafeBoot Minimal - command to start a secure mode;
bCDEDIT / SET (identifier) \u200b\u200bSafeboot Network - command to run a secure network support mode;
bCDEDIT / SET SAFEBOOTALTERNATESHELL YES - a command to run a secure mode with a command line.
For example, a command to launch a simple secure mode in our example will look like this: bCDEDIT / SET (CURRENT) SAFEBOOT MINIMAL.
After executing the operation, close the command prompt window and restart the computer. To exit the secure mode again, open the command prompt with administrative rightsEnter the command: bCDEDIT / DELETEVALUE (Identifier) \u200b\u200bSafeBoot And restart the system, otherwise Windows will continue to boot in safe mode!
Hello, friends! In this article I will tell about safe mode for Windows 7 and Windows 8. This mode is required to troubleshoot the system and return it to the working condition. Safe - mode in which only the most necessary is loaded, which is directly responsible for the operation of the operating system. The minimum set of drivers, programs and services. What you have in the autoload is also not loaded. It greatly raises the chances of a successful loading of the system and thereby eliminating the caller failure. It may be a program, driver or something else. For example, changing any system settings after which it crashes blue screen Or cyclic reboot occurs. All this can be tried to fix booting in safe mode. How to do it next
Will be loaded in safe mode in the Windows 7 operating system simply. Just just as it was always in all past versions of Windows. Just a few times, when loading a computer, press the key F8.. This will appear with additional options for downloading the following type.
Enable VGA mode - loading the operating system with the driver of the current graphics adapter on low frequencies and resolution (640 x 480). This makes it possible to configure the resolution and frequency for your monitor. For example. You connect a low-resolution monitor to a computer and it (monitor) gives the black screen (does not work at the installed frequency and resolution). Loading in VGA mode and set the necessary settings.
Launch load successful configuration (with workable parameters) - each time you successfully turn off the computer, the operating system remembers important (responsible for performance) parameters. In case of incorrect loading, or at all, Windows can not use these item and restore the computer performance. This is the first and simplest thing to be done with Windows download problems.
Restoring the Directory Service (Only on the Windows domain controller) - the Active Directory directory service mode with the possibility of restoring the latter. The mode is currently for IT specialists on domain controllers.
Debug mode - Start the operating system in the advanced debug mode for IT specialists.
Disable automatic reboot If system fails - This mode is required to diagnose a computer in the case when the system immediately reboots when it fails or enters the cycle.
The remaining items are understandable.
How to boot in safe mode windows 8
Not only gadgets were removed from the new operating system, and the possibility of the F8 key to call the additional download options. As they say on the official website of Microsoft - you can not have time to press F8.
Once tried to get into safe windows mode 8 Using the F8 key - nothing. A little "google" on this topic found advice. Press SHIFT + F8. I tried this combination several times - the effect is the same. I tried to click and do not let F8 and SHIFT + F8 - nothing. On this, my attempts to go to safe mode with the move ended.
It remains to hope that with incorrect download windows 8 will boot in safe mode. If this does not happen, then you need to boot with boot flash drive or disk as when installing Windows 8. In the window below, click "Restore Computer"
In the next window, select and return the computer to your chosen date.
Methods will be given below how to get into the secure mode of Windows 8 from the operating system.
Log in to secure mode via msconfig
In order to get into the secure mode in Windows 8 you need:
Secure Windows 8 mode through a reboot with "Shift"
To get to the secure mode of Windows 8 using this method, it is necessary:
Windows 8 will boot in safe mode. Thanks for this way http://windxp.com.ru/
Boot UI TUNER - the easiest way to boot in safe mode
Of all the ways presented here, go to the safe mode in the operating room windows system 8 This is the easiest. Download the bootuituituner utility or from the official site or from here
- [~ 52 KB]
Unpacked, you will find there two folders for the 64th and 32rs (86) discharge systems. Choose for your system.
2 . If you do not know the cause of the operating system failure, then you can only run the programs that you have in autoload. Thus, you can calculate the conflicting program and also remove it
Select the program and click Delete
After trying to boot in normal mode.
3 . It is necessary to take advantage of the system restoration. To do this, click Computer Press right-click Mouse and choose the item "Properties". In the opening window, we choose "System Protection"
Click on the Restore button ...
In the window, you can select the recommended recovery or select another recovery point. Choose and press further\u003e
If the recovery at a specific point did not help choose an earlier recovery point. More about restoring the system can be found.
Quite often there are situations when the computer does not load even in safe mode. The blue screen also flies. In this case, you can also try to boot in safe mode with command line support.
In this mode, to start the system recovery, you must dial command rstrui.exe. And press ENTER.
If you do not have the ability to use the system recovery and you need to try the command sFC / SCANNOW. Also from the command line (more details about the restoration system files You can read)
If you are loaded only a secure command line support and you need to get into the Device Manager, use the command devmgmt.mSC.
This section brought everything I know for windows restoration From the secure mode. Thank you http://remontcompa.ru.
Conclusion
In this article about the safe mode of Windows 7 and Windows 8, we figured out how to go to it and what to do if you can't go. An excellent option to try to restore the safe mode is the restoration of the registry branch responsible for it. In my practice, it was almost always possible to boot in safe mode and recover the system.
If you fail to go to the safe mode, and you know that there is a recovery point, you can and you need to boot with installation disk Windows and choose. If nothing helps that the hard disk connected to another computer, all user data was reset and the operating system was clean. Then the data returned back.
Never tried to use the team recovery SFC./ Scannow. Let's fix it.
Video in which I will tell you how to go to the secure mode in Windows 7 and Windows 8
What is it for?
Sometimes after installing new software or as a result of the influence of viruses is normal windows work 7 is broken. Due to the abnormal behavior of the OS, to detect and eliminate the cause of its occurrence is sometimes quite difficult. Here and can help a safe mode (in unintended versions of the system it has the name SAFE MODE). In some situations, Windows 7 independently enters it during its launch after the pc hangs. However, the user itself has to download Windows 7 in safe mode. What is this mode, and how to run it?
Safe Mode is designed to diagnose and find out the cause of the abnormal functioning of the OS. From the usual start of the system, it differs from the fact that applications and drivers installed after installing the operating system are not loaded. At the same time, it appears the ability to remove the virus, or an application that in conventional method Not deleted, or driver conflicting with other equipment.
1st way to boot in safe mode
When the PC is turned on, it is necessary, without waiting for the appearance of the OS logo, press and hold the F8 key. In some models of laptops, one of function keys F1-F12. At the same time, an additional download option appears on the screen, having a view:
The first three options belong to the desired option, but select the first one - the white color selected in the picture. This is done by the arrow keys, after which you need to click "ENTER". The system starts, at the end of which the black window will appear with a resolution of 640 × 480 pixels, and "Safe Mode" will be inscription in the windows of the window.
The method described above is valid only if only one OS is installed in the PC. Otherwise, in order to run Safe Mode, you will need to press F8 twice. The first press will lead to the appearance of the downloader message about selecting the loaded system. It should also be selected by the arrow keys, click "Enter" and immediately press F8 again. The above window appears with additional startup options.
Second way to run Safe Mode
This method can be used with the already loaded Windows 7. It consists in performing the following actions:
From this article, users can learn about the ways to run the secure Windows mode.
All methods for launching this mode for all versions of the operating system are studied in detail.
What is a safe mode?
See also: 3 ways to disable "sleep mode on windows (windows)" (7/8/10)
Safe PC mode is a mode in which the systems are disabled. Experts recommend using such a mode of operation if you need to remove viruses on your computer.
The user may notice that the resolution of the computer has decreased, and the working table has become black. At the same time, the display shows the inscriptions.
Often, running the system in this mode, the user will be able to solve the existing problem. Note that the safe mode is suitable only in order to solve problems within the operating system.
For permanent operation of the installed OS (for example, to edit documents, and so on) it will not suit.
If the user has problems in the computer, for example, with installed drivers or software (for example, they are downloaded in automatic mode And the user does not work uninstalling it in standard operation), do not panic - after all, you can cope with this problem in the secure mode of a personal computer.
To do this, go to it by clicking and holding the F8 key on the keyboard. Paving an answer to an important question, what is the "Safe Mode" function, it is important to say how it can be turned off.
Known various methods solutions such a task. They differ only to the Windows version used, that is, 7, 10 and others. So we should consider ways for all versions
Common methods
See also: Top 3 simple ways How to show hidden folders or hide the required folder and install a password on it in Windows 10
There are a pair of standard methods in any OS, using which you can enter this mode. And they are some of the easiest.
In order to take advantage of them, no special skills of ownership personal computer, it is enough just to read the instructions carefully, and then you will succeed.
So, let's begin. Entry with the utility msconfig.
In the first way we use special utilitythat will help us log in to SafeMode. You don't need to download it anywhere, it is built into the OS.
Procedure:
Press Win + R and in the eyed window that appears
Msconfig
(The "Win" button is located in the bottom line, it usually looks like a button "Start" on the monitor screen.)
After that click on the option "Downloads" and indicating the installed windows version, check the box near the item "Work in safe mode" .
This important point consists of several subparagraphs. When the user does not have the need for safe Internet access, you can choose the option "Minimum" . If you need stable access to the network, select Option "Net" .
Click OK And overload the computer. Next, the secure mode will turn on.
You can continue to work and make necessary actions. This is important: after all malfunctions are eliminated, go to the standard mode before continuing.
To do this, repeat the first item and clicking on the optionDelete the ability to enable secure mode.
However, by choosing this option, consider some details: it will only suit those users who have no difficulties with the OS load.
When you cannot install Windows normally, or, for example, there are problems with the boot of the desktop, it is worth trying other ways.
Logging by pressing F8. As already mentioned, similar method Suitable only when the user has problems loading OS.
In such a situation, the user must make the following actions:
1 Turn on your computer first and immediately press the small F8 button several times. As a result, the menu should appear. When working with some computers, you can use other keys or combinations (for example, SHIFT + F8). This is important: when the display of the wig or the user sees paper inscriptionSo, he did not succeed. In this case, it is worth waiting for the loading of the system, and after rebooting your computer, try again.
2 If the user everything turned out, the menu will appear. Using the arrows, the user can easily select the desired mode. If he does not know what it is necessary, it is necessary to stay on "Safe mode" Since this option is considered universal. Choosing the arrows the necessary option, the user must confirm its choice using the ENTER key.
As a result of such actions, the computer will reboot in safe mode.
But it should be borne in mind that the above action algorithm will not start safe mode in, because Developers disabled this option.
Safe mode in XP and 7 "seven"
See also: Top 5 ways How to fix the occurrence of the error "0xc0000142" when starting games and applications | Windowds 7/10
If you use these OS, you can use already named standard methods.
If the operating system is started, the first method should be used.
If nothing managed to run, then apply the second method. There are no specific prescribed steps.
Video: How to go to Windows 7 Safe Mode (XP)
How to go to Secure Windows 7 (XP)
Safe mode in windows 8
See also:
Do you have "eight"? There was an urgent need to use a secure mode? Again, you can use the standard methods to do this, but besides them there is still at least 2 ways. Let's consider it more.
Diagnostic tools
This method is relevant and will be useful only when the operating system managed to run on the computer.
Open "Parameters" - This icon is located on the side panel (in order to open this panel, put the mouse to the right extreme angle), click on "Turning off" After clicking the SHIFT button, and select.
If you all have done correctly, the diagnostic screen will open. In the window that opens, select "Diagnostics » -> "Extras. Parameters" -> "Download options" And confirm "Reload" .
In the next step you will see several download options. Select option "Enable Safe Mode" . Consequently, this is the F4 key.
When the secure mode starts, you can do all the necessary actions. In order to start standard PC mode, simply restart the computer.
You will open a window in which you will see download options. We need item number 4, which means the press "F4".
Running with Flash drive or CD disk
Although he is light, but if you are not an experienced user, it is better to ask someone more knowledgeable, well, or simply skip this option.
But if you decide to do everything yourself, then carefully read the instructions. This uses a special boot USB drive (USB flash drive) or a special boot CD.
You can make them on any computer from any or sv, respectively.
Make the following actions:
1 Connect a USB drive (or CD) and boot from the media.
2 A window will appear with the date and time settings. Do not be scared, just click on the button "Further" .
3 In the window that opens, choose "System Restore" . The diagnostic screen appears. Not the one we are in the previous way.
Action selection window
The dialog box where the command line is prescribed
6 After the end of work in a safe mode, we prescribe on the command line, again, without quotes - "BCDEDIT / DELETEVALUANCEDOPTIONS" and the transition to the diagnostic screen when the OS is turned on, it turns off.
7 Close and click "Proceed"
8 After rebooting the system will offer a list of boot methods - select and press "F4". Now the PC will turn on in safe mode. Ready! Our goal is achieved!
To begin with, we will define what secure mode in Windows 7 and what is it needed for? SAFE MODE or secure computer start mode is the diagnostic mode of the operating system loading mode necessary to troubleshoot. Usually it is applied when Windows does not start or runs with failures in normal loading mode. In safe mode, standard windows settings, as well as the minimum set of drivers, programs and components for stable operation of the OS. Thus, for example, if the laptop was installed software from an unreliable source, as a result of which the PC stopped being loaded, you can run safe Mode.To restore the performance of the system.
If the computer is turned on, it must be turned off or through Start Select in the menu. While turning on the computer, click F8. And hold it. If the Windows emblem appears, it will be necessary to repeat everything first - restart the computer and use the F8 key to wait for the window appearance Additional download options. You can see it in the picture below. If you have a laptop and window does not appear, try using a key combination Fn + F8..
Since we are interested in loading the operating system in a safe mode, select the corresponding cursor arrow point and press ENTER. You may need another mode of operation, so we will decipher them all.
System Restore - Shows a list of system recovery tools that can be used to troubleshoot when starting, to diagnose and restore the system.
Safe mode - Running Windows With a minimum set of drivers and services.
Safe Mode with Network Driver Download - Running Windows in secure mode with downloading network drivers and services needed to access the Internet or local network.
Safe Mode with Command Line Support - Running Windows in secure mode with the command line window.
Logging logging - Creating a NTBTlog.txt file that entered all the drivers installed during the startup.
Enable low-resolution video mode (640 × 480) - Starting Windows using the current video adapter driver and the choice of low resolution and update frequency.
Directory Recovery Recovery Mode - Running Windows in mode that allows you to restore the directory service.
Debug mode - Runs Windows in advanced mode to troubleshoot.
Disable automatic reboot when system fails - Prevents automatic restarting Windows In case of failure to work.
Disable forced signing drivers - Allows you to install drivers containing incorrect signatures.