How to install Windows 10 on a laptop. Than burn installation disk

Many users have already managed to assess the convenience and reliability of the new Microsoft operating system with the index "10". To date, the considerable number of specialists confirm that Windows 10 has become better and more stable earlier versions of windows. Therefore, a large number of users became interested in the question of how appropriate to install a new OS onto your computer and how to install Windows 10.

Below are the main arguments in favor of helping the user to solve whether to remain on the Operations installed already in its PC or go to modern system. And also in this article sets out a detailed instruction on how to correctly establish new windows 10 on your laptop and set up.

It should be noted that all the steps described in the manual are applied to the installation of the OS to the stationary PC. For the convenience of the reader, the entire article is divided into sections, so the owners of computers that are already well-aware in matters relating to Microsoft's novelties will not be difficult to immediately go to the specific question specifically.

Advantages of applying windows 10

Windov 10 absorbed all the best that was in previous versions "Windows" and at the same time developers tried to save it from most of the shortcomings present in the already obsolete windows. People who installed Windows 10 on a laptop note that in general the axis began faster and gained more comfortable handling.

There are five of the following basic criteria for expediency that require special attention from laptop owners:

Of course, the above list is only the vertex of iceberg, but it will help the user know the key differences of the novelties. Next, we proceed to the installation procedure new axis on a laptop. detailed instructions It will allow each computer owner to establish the "top ten" without resorting to the services of specialists.

Can I install Windows 10 on a specific laptop?

First, it is necessary to make an analysis of the ability to install new system On your laptop. Indeed, it is quite a chance that either the installation process will not be performed correctly or operate Windows 10 in the laptop will be with failures. All this depends on the technical equipment of a particular laptop.

On the official resource "http://www.cpuid.com/softwares/cpuz.html" there is a program that quickly can inform the owner of the PC on compliance with the parameters of the computer "Dozens" requirements.

And the user can independently compare all of the following parameters:

Processor S. clock frequency Not less than 1 GHz;
Display at least 800x600 pixels;
Having support for SSE2, NX and PAE;
Free space on the hard disk is not less than 20 GB;
Video accelerator supporting DirectX 9 or newer;
When installing a 32-bit OS, no less than 1 Gb RAM is required, and at 64-2 GB.

Such images, in case the device bought less than three years ago, Most likely windows 10 will not cause problems.

How long to install windows 10?

The limiting factor in the installation speed is the speed of the Internet accessible to the user and the drive system. On modern computers, the procedure is not more than half an hour, but if the technical equipment of the laptop is outdated, and specifically PCs equipped with simple HDDs, which have only 5400 rpm., The procedure will take at least one hour.

Installation Guide

First you need to enter the official page: "https://www.microsoft.com/ru-ru/software-download/windows10", on which there is everything you need to install Windows 10. You can become a full-fledged owner of the "dozens" by the market by reference : "Https://allsoft.ru/software/operatsionnye-sistemy/os-windows/Microsoft-Windows-10/?partner\u003d%2018262".

In order to prevent further problems, it is not strongly recommended to use extraneous resources. It should be noted that Microsoft developers well have worked well and submitted qualitative resources on their official resources. software.

Choosing the installation method

Most optimal option To install Windows 10 is the installation "with pure sheet"Using the boot CD or YUSB drive. It is also possible to install using built-in OS - "update center". For example, if there is licensed windows 8 on the user's laptop, it is easier to perform its upgrade through the update packages. Next, the user will receive a recommendation on the installation of the OS with the index "10". After downloading the Distribution, the "Dozen" is independently installed in the laptop (the weight of the distribution with the new operating system is about 4 GB).

Windows installation procedure 10 from loading media

You need to download the OS image from the resource that was given above in this article. On the same site there is a special application "Media Creation Tool" (MST), which will allow correctly burning the downloaded image on USB-Flash. After hitting the site page, you only need to know the system's discharge from the user, click on the corresponding button shown in the figure below.

The sequence of actions is as follows:

In the MST application, put a mark on the installation method you choose;
Next, specify the parameters: "Language", "Release" OS and the number of its "bits". It is desirable, even in the case of a processor of sufficient power for 64-bit, with less than 4 GB installed with RAM, indicate 32-bit OS installation.
Then define a device for saving the image: DVD or YUSB drive;
Wait for the complete completion of the preservation of the distribution and restart the computer;
After that, the system loading with external carrierotherwise you will need to set the desired laptop launch sequence in the BIOS;
In the displayed window, determine the language and click on the "Next";
Then click "install";

Decide where to install Windows 10. It is necessary to format the disk formatting for the OS installation. In the case of several physical partitions on the hard disk of the laptop, only the one on which Windows will be installed is to be installed. If the disk is not divided, the user can create an appropriate partitions.
As soon as the formatting process is complete, you must click "Next". Then the user will be approximately fifteen minutes on vacation and a cup of tea while the process of installation of the system in the PC is being installed;
The next menu is displayed with the settings where you can click on "Use Standard Parameters";

The next step can be skipped;
After that, print your data into the appropriate fields and click "Next";
The subsequent displayed menu can be ignored (depending on your own user preferences);
Then it is recommended to click "by default ..." and click "Next";
After that, the procedure represents a simple sequence of actions that are performed by following brief instructions appearing windows;
Completion will start setting up programs in automatic modeat which the user is only required to wait (the process takes several minutes);
Ready! Waiting for the end automatic setting You can start using a new OS.

Installing Windows 10 on a computer is not at all difficult. You just need to make some simple steps, and Windows 10 will be placed on a computer completely free of charge, and ready to use. Follow the step by step guide.

Step 4.: Choose language, time format and monetary units, and keyboard layout; Click on the Next button.

Step 5.: Click on the "Install" button

Step 6 : "I accept the terms of the license agreement" put a check mark and click the Next button.

Step 7: Now you have two options:

Option A: Updating the existing operating system. Select this option if you want to save all existing files, applications, as well as settings. These files and information will be transferred from the old OS, to the new one.

Option in: Install the clean Windows 10 by selecting the operating system partition. it a good option For users who cannot update.

Step 8.: If you selected the "Update" option, go to step 9 below. If "Selective: Only installing Windows", select the section in which you want to place OS. You can also click on the "New" to create new section To install.

Step 9.: Wait until the process is over.

Step 10.: Upon completion of these enough long-lasting processes, the product key will be prompted. If there is a key - enter, if not, click "Make later" below. When updating, the recording of the key will not need.

Step 11.: Next "Create an account for this computer", you will be offered or login, or create an account microsoft recording Or create a local account if you do not connect to the Internet.

Step 12.: Finishing Stage - Setup standard applications. Preparation for launch will not take much time.

I hope our guide helped you find out how to install Windows 10 on your computer.

Nor try in Russia to promote various alternative operating systems for Linux or MacOS computers, all the same, Windows is still more popular. To date, the most modern version of the OS from Microsoft is Windows 10. It has convenient user interface, excellent functionality and wide opportunities. In my opinion, this version has every chance to jump in popularity to the legendary "seven".

Despite the very and very friendly interface, even for an unprepared person, users still have any questions. One of the most frequent - how to install Windows 10 on a clean computer from scratch. Here let's go and consider in more detail!

Preparation for installation windows 10

Before doing something, it is necessary to prepare thoroughly! The first thing you need is installation disk or boot flash drive from just Windows 10! The easiest way to do it is the Microsoft branded utility.

Despite the fact that it is also often for windows installations 10 On the computer uses morally outdated DVDs, much easier and faster will use the installation flash drive. The only condition is the capacity of the USB drive must be at least 4 gigabytes.

It is also worth abandoning the drivers for the basic components of the PC nodes - the motherboard, the video adapter, sound card, WiFi adapter etc. You can separately download the software for each device on the site of its manufacturer, or use the means automatic installation Drivers. For example, Driverspack Solution.

After installation flash drive Ready - stick it into a USB port. Now you have to force your computer or laptop to load from it. To do this, when you turn on, click on the "DEL" key. In laptops, this is most often used "F2" button.

In the BIOS, you need to go to the Advanced Settings advanced parameters and find the "First Boot Device" item. Here you need to select "USB-HDD" item - this is a flash drive.

Note: On laptops, as a rule, in BIOS there is a separate section "BOOT", dedicated to the loading of the device:

Here is all the same - we find the first booting device "1st boot priority" and set there installation carrierfrom which Windows will put on PC.

Installing the operating system on a computer

Preparation completed, now go directly to installation. If you did everything right, then after the next reboot, the selection of language will appear:

Now you need to enter the product key. Without him next steps Will not be available.

If you do not have licensed keyYou can always use free installation keys for dozens that can be found here. They allow you to install Windows 10 to a computer or laptop without any problems, but then you will still have to search for a license or exercise alternative options somewhere.
The next step is a license agreement that no one ever reads:

The next step is very responsible. If you are trying to install Windows 10 to absolutely new hard disk HDD. Or SSD, then it must be placed at first.

Press the "Create" button and get below this menu:

Here you need to specify the size of the created system disk. After you click the "Apply" button, this window will pop up:

We agree by clicking on "Yes" and see this picture:

The installer created a system partition by 500 megabytes reserved by the system and the main installation for the operating system.

Note: If you have a big hDD, it is best to do several sections than one, but huge.

If the HDD or SSD rigid disk is already marked, then the selected Windows 10 section must simply format by clicking on the appropriate button.

During this, at least one reboot of the computer will occur.

On average, installing Windows 10 to a computer or laptop takes from 20 minutes to an hour depending on the characteristics of the device.

When the "Enhance the speed of work" window appears, the option "Use Standard Parameters" is best.

We are waiting again until the installer execute a number of operations.

Click on the line "This computer belongs to me" and the "Next" button. Then you need to skip a step with the Microsoft account data entry.

Please note - is there a lines with an exclamation mark? These are unidentified components or devices that Windows 10 has no standard driver. If everything is clean, then in principle, the system can be used. Although I would still advise as soon as the installation of Windows 10 is sure to run the utility DriverPack Solution and automatically update all drivers to recent versions.

The fact is that standard universal Drivers Used that the computer turns on, started and more or less normally worked. They are not always suitable for user tasks and therefore such an update is extremely necessary.

Secondly, be sure to go to the "Dozens" parameters and open the "Update and Security" section where you run the search and installation process of the system updates.

Windows 10 is an operating system in which it appeared again start menu. It opens as in Windows 7, although the metro-interface remains and can be activated through the taskbar. From the new products here too virtual desktops, launching subway applications in windows, slightly modified interface and other, smaller parts.

Let's start with the Start menu. In Windows 8, it lacked it to many, and then they came to the rescue (and come still) special programsthat turned off the starting metro screen. Microsoft realized that touch screens There are not everyone (and not everyone needs it), and in new version Pushed the Metro-Style interface to the background. Now the default is the Start menu, and the tile interface can be activated in the settings in the control panel. The Start menu now contains both metro-application tiles and desktop programs, and in the form we used to. This menu Now you can change in size, namely, to increase or reduce its height.

If you used Metro-Style applications, now you will rate what they start not only in full screen mode, but also in windows, as well as the desktop programs. In windows 8 there is sNAP functionwhich divides the working table into two parts: one is shown the metro application, and in the second - a desktop or any program from the usual interface. Here, in Windows 10, this function has not only remained, but also evolved. And now she can share the screen as well on 4 applications, not depending on the interface for which they are intended. In order for it to use it to tighten the window to the corner of the screen or the side of it.

In addition, the new system is equipped with virtual desktops, which were not previously. There are taskbar tASK VIEW button. When you click on this button you can see all running applications, as well as create new (empty) desktops on which new programs can be placed. It can be convenient for the division of species. For example, programs for work may be contained on one desktop, and programs for entertainment - on the other. Also, using virtual desktops you can organize the work of several people on one computer. Wherein running programs The taskbar is displayed in an interesting way. Icons of the current program (active on this moment) The desktop is displayed in normal mode, and the program icons on other virtual tables are marked only by a small strip below (see screenshots). Thus, we see all programs running on the computer, but at the same time can recognize them by accessories to different desktops.

Right vertical panelwhich in Windows 8 extends when moving the cursor to one of the corners, in the new system is also present, but now it does not respond to the cursor, but is called a key combination Win + C.. Through it (if you are convenient to use key combinations), it is convenient to open the control panel, the system information dialog and the personalization dialog. There is also a power button and volume slider, but windows user 10 will resort to their services extremely rare, as it is possible to turn off the computer and adjust the volume is simpler.

There are changes in the interface. The windows selected frameworkBut they made more spectacular opening and closing animation for them. Some icons were changed, although by the time the final windows version 10, apparently, all standard icons will be updated.

If you are of those who like Metro-Style interfaceYou can activate it. Click on the taskbar right-click Mouse and select Properties, then in the window that opens, go to the Start Menu tab and remove the checkbox Use the START MENU INSTEAD OF START SCREEN (Use the Start menu instead of the Start screen). Thus, Windows 10 developers confirm their intention to make a system that would fit for all devices.

In general, despite all new features, for "Haters" Microsoft again opens a wide field for criticism. The company is trying to sell us again that by and large it was possible to implement in the new service pack for Windows 8. However, we are already accustomed to this, and Windows 10 a few years after the final issue, most likely will exceed Windows 8 by the number of users.

At the end of 2019 with download windows 10 To install the methods described below, the version of Windows 10 1909 November 2019 UPDATE is loaded. If you have already been installed licensed windows 10 On a computer or laptop, obtained by any way, enter the product key when installing is not required (you should click "I do not have a product key" at the appropriate stage). More about the features of activation in the article: (you can work without activation, see). If you only need to fix the problems with the installed OS, while it starts, you can use a simpler method :.

On the first screen of the installer, you will be asked to select a language, time format and a keyboard input method - you can leave the default values, Russian.
The next window is the "Install" button, which should be pressed to continue, as well as the "System Restore" item below, which will not be considered within this article, but is very useful in some situations.
You will fall into the product key input window to activate Windows 10. In most cases, except those when you separately acquired the product key, it is enough to press "I do not have a product key". Activation will automatically after connecting to the Internet, if a licensed Windows 10 has already been installed on this computer or laptop, additional action options and when to apply them are described in the section " Additional Information"At the end of the leadership.
The next step (may not appear if the editorial board was determined by the key, including from the UEFI) - the choice of Windows 10 edition for installation. Choose the option that was previously set (if the activation of the fixed digital license is required).
Read the terms of the license agreement and accept them. After it was done, click the Next button.
One of the most important points - selection of the installation type of Windows 10. There are two options: update (it is possible to execute only if the new system is installed when it is installed on the disk old version OS) - In this case, all parameters, programs, files of the previous installed system are saved, and the most old system Saved to the Windows.old folder (but this option is not always possible to run). I.e this process similar to simply updateHere will not be considered. Selecting Installation - This item allows you to perform a clean installation, without saving (or saving partially) user files, and during installation you can smash the discs to the partitions, format them, thereby clearing your computer from the files of the previous Windows. It is this method that will be described.
After specifying the selective installation, you will be taken to the installation disk selection window. possible mistakes Installations at this stage are described below). At the same time, if it is not a new hard disk or SSD, you will see a much larger sections than before it was seen in the conductor, an example is shown in the screenshot. I will try to clarify options for action (also in the video at the end of the instructions I show in detail and tell me what and how can be done in this window).

If there are several physical disks on your computer, they will be displayed as a disc 0, disk 1 and more. Everyone can have several sections. Regardless of which disc you install Windows 10, the disc 0 will be used to record system files, hidden partitions and bootloader. Therefore, ideally, install an OS on the disk 0 (otherwise, if this disk is turned off, there will be no system on another disk). If, for example, you purchased a new SSD and it is displayed as a disk 1, you can try to find a separate item in BIOS to specify the sequence hard disks and put SSD to first place, or change SATA loops (if this interface is used) between two disks to disc Because of the installation program as a disc 0.
If your manufacturer has been pre-installed Windows, then in addition system sections On the disk 0 (their number and dimensions may differ 100, 300, 450 MB), you will see another (usually) section of 10-20 gigabytes. I do not recommend to affect it in any way, as it contains an image of a system recovery that allows you to quickly return a computer or laptop in factory condition In case of such a need. Also should not change reserved system Sections (except those cases when you decide to completely clean the hard disk).
As a rule, with a clean installation of the system, it is put on the partition corresponding to the C disk, with its formatting (or removal). To do this, select this section (it is possible to determine it in size), click "Format". And after that, by selecting it, click "Next" to continue installing Windows 10. When messages appear on the installation of installation to this section, click on the message to get error information (they are discussed later in the instructions). Data on other sections and discs will not be affected. If you have installed Windows 7 or XP on your computer before installing Windows 10, a more reliable option will delete the partition (but not format), select the unintended area (unoccupied disk space) and click "Next" for automatic creation The required system sections of the installation program (or the use of already available if available).
If you skip formatting or deleting and selecting the section on which the OS is already installed, the previous Windows installation will be placed in the Windows folder.
The optimal method: If on yours system disk (Disc 0) There is nothing important, you can completely delete all sections of this disk one by one, select a single unoccupied space on the disk 0 and click the Next button, this will avoid almost any errors and problems. Create a D disk (if required) you can already install the system.
If a previous System Installed on a section or disk C, and to install Windows 10 you will select another section or disk, then as a result, you will be installed on the computer simultaneously operating systems With the choice of the computer you want.

Note: If you select a message when selecting the partition on a disk, you can not install Windows 10 to this section, click on this text, and then, depending on what the full text of the error is, use the following instructions :,

After selecting your option to install, click the Next button. Copy will begin windows files 10 on the computer.
After rebooting, some time of action will not be required from you - "Preparation", "Configuring components" will occur. At the same time, the computer can reboot, and sometimes "hang" with a black or blue screen. In this case, just expect this normal process - sometimes tightened on the clock. Important: If after restarting you again starts the Windows 10 installation program, simply check the download from hard disk or SSD in bios or Windows Boot. Manager in UEFI, or disconnect the USB flash drive, or do not press any key when a request appears about it.
The next step is to configure the main parameters of the system. The first point is the choice of the region.
The second stage is a confirmation of the correctness of the keyboard layout.
Then the installer will be offered to add additional keyboard layouts. If you do not require input options except Russian and English, skip this step (English is present by default).
If there are active network adaptersYou will be prompted to connect to the Internet. You can do this, especially if you plan to use Microsoft account. If you need a local account - I would recommend not to connect to the network until the end of installing Windows 10. To do this, click on "I don't have the Internet" and "continue limited installation" in the next window.
If there is a connection to the Internet, two options will be prompted. windows settings 10 - for personal use or for organization (use this option only if you need to connect the computer to working network, Domain I. windows servers In the organisation). You should usually select an option for personal use.
At the next stage of the installation, the account windows records 10. If there is an active Internet connection, it is proposed to configure the Microsoft account or enter the existing one. You can click "Autonomous Account" at the bottom of the left to create a local account (in Windows 10 home recent versions there is no "Autonomous Account" item, but it is possible to create it anyway, see). In the absence of an Internet connection, a local account is created. When installing Windows 10 last versions after login and password entry, you will also need to set control questions To restore the password during the loss.
When using Microsoft account, you will see the offer to use the PIN code to log in. It will also be prompted to configure ONEDRIVE.
When you select a stand-alone account, you will tell you about the benefits of using the Microsoft account (refuse), and then you will need to enter the computer username. Do not enter the name of the administrator, as it is fixed behind the hidden systemic accounting. You created by the user with any name in any case will be windows administrator 10.
Enter the password for your account, confirm it, and then select and specify the answers to the control questions that will be used in case you forget your password.
You will be prompted to enable Windows 10 actions log - new featureStore history of programs used, documents, sites with the ability to access other devices with the same Microsoft account. Enable or disable - at your discretion.
And the final setting step is to configure Windows 10 privacy parameters, including the transfer of location data, speech recognition, diagnostic data transmission and creating your advertising profile. Carefully read and disconnect what you do not need. I turn off all the items, but if you have a laptop or tablet, you can recommend to leave the location and device search enabled, it can help find it in case of loss.
Following this, the last stage will begin - setting up and installing standard applications, preparation of Windows 10 to launch, on the screen it will look like an inscription: "It may take a few minutes." In fact, it may take minutes and even hours, especially on the "weak" computers, should not be forced to turn off or restart it at this time.
And finally, you will see a worker windows table 10 - The system is installed successfully, you can start it with its configuration and study.

Video Instructions for installing Windows 10 with USB USB

In the proposed video instruction, I tried to visually show all the nuances and the entire installation process of Windows 10 from start to the end.

Actions after installing OS on a computer

The first thing to be concerned after the clean installation of the system to the computer is to install the drivers. At the same time, Windows 10 will load many drivers of devices in the presence of an Internet connection. Most drivers will work properly, but just in case, consider that they can be downloaded:

For laptops - from the official site of the laptop manufacturer, in the Support section, for your specific model laptop. At the same time, even if there are drivers on the official site only for Windows 8.1, 8 and 7, they can be installed in Windows 10, usually will work. Cm.
For PC - from the manufacturer's site motherboard For your model.
For a video card - with relevant NVIDIA or AMD sites (or even Intel), depending on which video card is used. Cm. .

The second one recommended by me - after successfully installing all drivers and activation of the system, but even before installing programs, (built-in OS facilities or with third-party programs) in order to significantly speed up in the future reinstalling Windows If necessary.

If, after a clean installation of the system to the computer, something does not work (for example,) or you need to configure something (for example,), with a high probability you can find possible solutions I have problems on the site, or use the search on the site in the menu by setting the question in your own words: with a high probability of solution will be found.