WINDOVS 10 default programs. Standard File Types Applications

IN operating system Windows 10, Edge is set as a default browser, Groove music - the default music player, and edge by default as a viewer pDF files . If the user wants to assign another default application, you will need to go to the section Parameters → System → Default Applications And change the settings according to your preferences.

Despite the fact that most users can change the web browser, device reading PDF. and other default applications in the application parameters, often windows users 10 complain of the impossibility, change the default applications.

If you can't change the default web browser, and you cannot install the default video player VLC to install any other program or default application, you can apply one of the two methods below to change the applications by Default and install your favorite programs / default applications in Windows 10.

Method 1 of 2

Changing the default application using the control panel.

In addition to new settings, you can use the classic control panel to change the default applications as well classic programs in operating room windows system 10.

Step 1:Open the control panel by typing Control Panel In the Start menu or on the taskbar, the search field, and then press the ENTER key.

Step 2: Change the method of displaying the control panel using the menu Viewin the right refund corner Small badges. Find and click the icon Default programs.

Step 3:In the default program selection window that opens, click on the first link. Default Software.

Step 4:In the left pane, select your web browser or any other program you want to establish as the default program.

Step 5: After the selection of a program or application, you will see this program and available options in the right side window. Click Use this default program and click OK To install it by default.

It's simple!

Method 2 of 2

Using the DEFAULT PROGRAMS EDITOR utility

There is an excellent utility DEFAULT PROGRAMS EDITOR. which can easily change or install default programs in Windows 10. The only drawback of the utility is that it does not support modern applications installed from the store. Use this tool only if you want to set the default - classic desktop programs.

Step 1:Visit this pageand upload last version DEFAULT PROGRAMS EDITOR (default editor). You can run the program without the need to install. Unpack the resulting archive and run the executable file.

Step 2:Run the editor. Click on the button DEFAULT PROGRAMS SETTINGS..

Step 3: Select the program you want to set the default. Press the button Next.

Step 4: Select what extensions you want to associate with the program. We suggest you choose everything.

Step 5:Press the button Save Default Programs (Save the default program). Ready!

All installed in Windows applications Have their own associations or relationships with certain types of files. Such programs are also called default and Windows applications allow you to configure associations for each file format registered in the system (PSD, JPG, MP4, MKV, 3DS, and so on) and specific protocols (BitTorrent, links to Telegram, links to iTunes). This article will tell you that you need to know about setting up standard applications in Windows 10.

Assign the default parameters for different applications in several ways.

How to configure the default program for a separate file format

This method is very simple and even obvious, but its disadvantage is that the user can only configure one format and does not have more flexible settings for standard applications. If you need thin tuning, go to the second item.

How to change Standard programs in Windows 10

How to install default applications for all types of files

IN Windows parameters 10 There is a section in which the system collects all registered file extensions and allows you to determine standard programs For these formats.

Changing default applications for protocols

How to change the default applications in the Windows Control Panel

There is another way to configure standard applications in Windows 10. It is performed through the classic control panel interface, still present in Windows 10.

How to reset the default applications

By the default of Windows 10 opens up popular extensions files in their own standard applications. If you change these parameters and want to quickly return everything back, go to Parameters - Applications - Default Applications. Run down slightly lower and click on the button. Reset.

Sometimes Windows 10 itself resets these settings. You may encounter notification of changing the default settings, or just notice, for example, standard browser Chrome. / Firefox / Opera suddenly switched to Microsoft Edge.Or the music began on the default in Groove Music. In this case, just spend the default re-configuration according to this instruction.

New Windows 10 has many features, small and large. Windows 10, like other versions of this OS, allows you to set multiple application applications different types Files (for example, Windows Media Player. and VLC for audio / video). The presence of multiple applications installed to work with files provides flexibility, but has certain inconveniences, you have to choose each time what the application to process the file.

But it is easy to get around and install default applications for file processing in Windows 10. When applications are default, you will no longer be offered to select the application to which the file will be open. And most importantly, you can set the default programs both traditional and Metro style.

How to install default applications for files in Windows 10?

Set default applications for processing various files In Windows 10, quite simple.

Step 1: Open the application PC Settings - PC settings. In the left column, select Search and Apps - Search and Applications.

Step 2: Now in the last column there will be a few more relevant depots. Select option Defaults - Default.

Step 3: Now the default applications are visible in the right column to process the main types of files (audio, video, web pages, etc.). To specify (or change) the default application for a specific task / file, simply click on it and select the desired application option. The list of available applications includes as traditional software applicationsand applications in a new style. If you can not find an application that you need to directly search it at the Windows Application Store.

That's all: in this way, you specified the default applications for processing all file types.

Leave your comment!

Select the default program using the Open menu

Click the right mouse button on the file and select the item in the context menu. To open with

In order to open the file in the program other than the default used, simply select it from the list of available programs.

To change the default program for the selected file type, click Select another app

In the window that opens, you can select a program to open this type of files and mark the parameter always use this application to open .xyz files.

If the list of programs you want to choose, click More applications ↓

If and B. full list You did not find the program you need, click Find another application on this computer. A conductor window will open, in which you can specify the path to the executable file you need. Note that in this way you can choose only a classic application.

If the file type is not mapped to any application on a computer, then in the same way you can select the program to open this file.

Select default programs in Windows settings

Press the button Start and open Parameters. Go to section System and select Default applications.

If due to the incorrectly running program or simply by mistake, incorrect file mappings were set, then here you can reset the default values \u200b\u200bby clicking the button. Reset At the bottom of the window.

To change the default application to open images, click on the name installed in this moment Applications and select your preferred application in the menu.

If there is no application with a specific type of files and protocols, you can click Select default value To match the preferred application. And if the appropriate application is not installed on the computer, then you will be prompted to go to the store to search and download a suitable application.

To match the application with specific file extensions, click the link Select standard file types At the bottom of the window.

A window will be open containing a list of all file extensions registered in the system. Here you can match a specific file extension to one of the applications from the list.

To match the protocols to a specific application, use the reference Selection of standard applications for protocols At the bottom of the default applications window.

In the window that opens, you can change the default application for a specific protocol.

The classic control panel provides more features of mapping applications of certain types of files or protocols.
Press the right mouse button on the Start button or use the keyboard shortcut. Win + X.and select Point in the opened menu Control Panel.

Unlike the selection of standard applications for file types in the system parameters, here you can not only select the application from the list, but also add a classic application as in the case using the menu.

In order to select the default values \u200b\u200bfor a specific application (file types or protocols), click the Set Default Values \u200b\u200blink.

A classic control panel window will open, in which you can assign the default program and select specific file extensions or protocols to compare them this program.

In the Windows 10 operating system, except for the already familiar ways, new options have appeared to select default applications. In this article we will look at all available options To implement such a setting.

Select the default program through the context menu

To do this click right-click Mouses on the file of the desired extension and in the open expand section "Open with help". If you need to start once this file Using another application, just select the appropriate one from the list. But if, there is a need to choose another program that will run the file, then open the "Select another application" item. A window appears with a list various applications. Here you can select another application, which by default will open our file. If there was no needed among the list of programs, you can expand it by clicking on "more applications".

Failed and in a more advanced list find the desired application? Then use the search for applications on this computer by clicking "Find ...". Further, through the conductor we are looking for need program, its file for running.

It should be remembered that this method of selecting applications only works for classical programs.

If the file with the desired extension is not defined any program, then when trying to start it, the entire window will open in which you can select the default application.

Select the default applications through the system parameters

Go to the "Start" menu and open the system parameters. In the next window, select the system and go to the "Default Applications" tab. There is a button for resetting the settings. It can be useful if applications that have been selected as basic, do not work correctly, or can not work with the desired files. By clicking on it, you can return all the settings in the original appearance.

For example, let's try to change the program for opening pictures and photos. We make a click on the name of the program, which has already been chosen before and click on the list to another application suitable for us more.

But when no program is selected for suitable files, you can select the standard value, the system itself selects the appropriate application. If this does not happen and it will not be on the computer necessary programthen a message will appear with a proposal to open a store, and there to execute the search and installation such application.

To determine the appropriate program for any extension, at the bottom of the window, click on "Selecting standard file applications".

A list with applications that are on a computer will appear. Choose from it any suitable for opening necessary type files.

Here you can define the protocols that will be used in programs as basic. At the bottom of the window there will be such a link to "select standard applications for protocols".

By clicking on it, you will open the window, you can find applications that will interact with protocols. In the old control panel you can still find different settings To compare the desired file extensions and protocols with applications. To open it, simultaneously press the two Win + X keys, or click the right mouse button on the Start menu. A small menu will open, in which you select the "Control Panel". Further open the "Programs" section and click on the "Default Programs". Further, we will need to click on the "Mapping of File and Protocols with Programs" link.