Make the sound louder on the computer at all. Quiet sound on a computer - ways to increase the volume. Check whether the latest sound card drivers are installed

When listening to music or when watching videos, almost every owner of this type of equipment is facing. It is notity that the built-in speakers of the laptop are clearly not designed for too much increase in volume, and in the fact that such a situation may occur even when the stationary columns are connected. And not all users know how to make the sound on a laptop louder than usual, although several simple solutions of this problem, which is called, lies right on their feet. Consider several of the most popular techniques that can enhance the audio playback volume, paying attention to the built-in tools for Windows operating systems, and third-party software productsand physical methods.

How on a laptop to make sound with a louder keyboard?

To begin with, there are several simplest solutions that are available to any owner of Laptop. Apparently, it makes no sense to say that all such computer devices provide special buttons or key combinations that allow you to adjust the volume.

On some models, they can be made on the main panel, other keyboard keys are used in combination, for example, with the FN, ALT or SHIFT buttons. This is the most elementary, which can be offered to the town center.

Simplest Sound Strengthening Solutions

As on the laptop, make sound louder to the keys for the same built-in speakers, it seems, and so understandable. But when connecting additional active type acoustics, when the volume control is located directly on columns or subwoofer, after setting the volume of the volume in windows Environment You can add the sound on the speaker system.

However, it is quite often possible to meet situations when the sound seems to be at the maximum, and when watching a movie online in a browser or when communicating in your favorite skype With the volume something wrong.

Many users, unfortunately, do not pay attention to the adjustment of the volume level in a mixer embedded in the operating system, and in fact, it is in it for running applications that the volume sliders are displayed. As it is already clear, to increase the sound level, it is enough just to move them for each specific program for the maximum mark.

Changing audio outputs and acoustics

Another fairly common situation associated with lowering the volume is used by the Sound cards. For example, non-integrated sound chips are very often installed in ultrabooks, and full-fledged cards that are inserted directly into the motherboard slots. At the same time, few people pay attention to the fact that when connecting the speakers to the sound card or even to uSB port The output level is noticeably lower than when using the output for headphones (this is an axiom). Therefore, sometimes with a small difference of resistances of columns and exit for headphones, it is better to use it.

If we talk about how on a laptop to make the sound louder due to the change of the acoustic system used, you can properly set to establish only those columns that are equivalent to resistance with the outputs of the sound cards to which they will connect. However, many specialists advise to do much easier and acquire wireless Bluetooth speakers. It is believed that when using them, the difference in the sound will be tangible immediately.

Drivers update issues

Sometimes the loss loudness may even be due to the fact that drivers sound card outdated, and it is no secret that manufacturers of any computer equipment are constantly working to improve its work due to installation newest versions Manager software. It is possible that it is his update and will give the desired effect.

Windows tools do not fulfill the meaning of the meaning, and better download the most fresh drivers From the official resource of the acoustics producer (you can even ask accurate search According to the device identifiers, which are defined in the Device Manager) or entrust the holding of the update automated programs like Driver Booster, which themselves identify the installed "iron" and some virtual components, after which they find the most latest versions Drivers solely on the official resources of manufacturers and developers, and then integrate software into the system without user participation.

How to make a sound in Windows using built-in tools?

But you can not really count on the drivers, since you still do not get a noticeable gain, so to speak, on objective reasons. But how to make a sound louder on a laptop? As it turns out, if necessary, you can take advantage of even hidden means of the operating system, which many users often forget or do not know at all.

It is about to configure playback devices, select the desired from the list, go to the properties and on the Enhancements tab to activate the Bass Booster enhancement elements and the loudness equalization (Loudness Equalization). How to make a loud sound? For the first parameter, you can set your own maximum frequency values \u200b\u200b(or leave the default set), but the activation of the second option when the volume decreases allows you to automatically reach its level to the total maximum value. But there is a reverse side. The fact is that with an excessive increase in the signal level in the track or video, it will be automatically reduced. Actually, this is the principle of dedication or normalization, that almost the same thing.

Increase playback level in software players

Now a few words about how to make a loud sound when using all kinds of software players. For example, in the classic windows Media Player You can use the audio option options and set the maximum level of amplification (Boost), as well as increase the overall level to the value of 400%. Of course, this is clearly not true, nevertheless you will feel the difference instantly.

In the VLC player, it is originally possible to install an exceedable audio sound level directly on the volume panel, and the value reaches 125%. In combination with additional processing, you can achieve more.

Some players can also use the built-in DSP effects, in particular, the equalizer. When it is activated, some advise you to set the frequency sliders to the highest position, which will give a noticeable increase in volume. But, it seems this is not the most the best decisionBecause in the end you can get wheezing and locking. Optimal option is the use of preset settings or own experiments.

The most interesting in this regard is the FOOBAR2000 software player. How to make a loud sound in it?

For this, the installation is just perfect additional components in the form of special drivers ASIO.as well as DSD processor and high-quality audio codecs.

Third-party equalizers and amplifiers

To increase the volume, there are also many specialized utilities, which, as stated, are capable of significantly increase the volume at the operating system level. This can include APO Equalizer, Letasoft Sound Booster and them like.

According to the developers of the second application, increasing the volume level can reach 500%. Fairy tales, of course, but some share of truth is there.

Main problems with increasing volume

With all this, it should also take into account some negative consequences of such actions. First, as already mentioned, with a too significant increase in sound levels, you can get foreign Summas And the signal distortion, and secondly, the warranty that on the connected speakers at the time of playing the sound at the volume of the volume is simply the diffusers (speakers), there is absolutely no. And if at this moment the microphone is turned on, and the press (whistle) begins in the columns, then it is possible to get quite unpleasant sensations (if you do not go out at all). Therefore, when performing such experiments, be extremely attentive and careful.

Additional solutions

If we talk about, on a laptop, you can add a couple more tips. So, for example, in the presence of a house of additional equipment like music centers, amplifiers or home theaters to organize withdrawal sound signal can be on their own acustic systems. If you want to use software Methods, try originally to process audio in special editors like Adobe Audition (former Cool Edit Pro Appendix), Sound Forge and those like.

Each such program has strengthening options (Amplify) and normalization (Normalize) audio, plus - many professional additional effects imposed in real time or using the pre-listening before saving the sound material.

Very often users information technologies Fight with too quiet sound on the computer. Of course, this leads to a variety of inconveniences. The reason for this can serve as several factors that can be eliminated in different ways.

Connectors

Frequently meeting the cause of bad sound. If you constantly connect additional columns to the laptop or headphones, the connectors are gradually spoiled, the contacts cease to work normally.

As for headphones, some models allow you to adjust the volume right on them. If the problem is really in contacts, you need to double-check all the wires and performance of the plug-in headset, for example, by connecting them to another computer or laptop.

On the right on the desktop there are icons, among which there is sound (about a clock). You need to make sure that the volume is at the maximum position. If this is not the case, the slider must be raised up. Further, it is recommended to check the sound on media device - a player through which music or video materials reproduced.

To configure sound quality, you can go to the control panel, equipment and sound. There are several tabs, among which, to solve the problem, you are interested in such as the volume and sound control of the audio devices.

When setting the volume, all indicators need to be raised to the level of 100%, and the device management involves ripping the sound of speakers and headphones in different positions.

The most common driver is REALTEK, which can also be displayed in the tray (around the clock). With its absence, there you can go to the control panel, equipment and sound where the driver managed is located.

There you can check if the volume of the sound, the bulk sound and a variety of sound filters can be checked.

Among the software there are also such that can increase the level of playback of certain files. The need is especially felt when the film is being viewed with a very quiet sound. You can use another player, in which the sound is installed on the indicators of more than 100%. It is also worth saying about the Sound Booster special program.

Such a program is able to increase the volume on a computer up to 500%, it applies to all types of players, web pages, Skype and other communication programs. It takes just a small area of \u200b\u200bmemory on the computer, and it is possible to manage it with hot keys.

Immediately after downloading, the icon is displayed on the tray so that you can quickly open the program. Also it allows you to configure automatic start When you turn on the laptop. It is noteworthy that it uses a variety of filters that set up excellent sound when playing files.

It is very important to monitor the sound level. If you want it to reach the maximum position, it does not mean that the dynamics embedded in the laptop will be able to withstand it. The work of the program improves the sound if there are no physical breakdowns on the device, but only a weak volume of the records themselves.

This codec package also helps when configuring sound playback quality. It can be downloaded on the official website of the program. To start, just open the EXE file with extension. If there is no laptop media player Player Classic., It will be installed automatically.

It will also need to play files with weak sound. Next, you need to open the Play, filters, the FFDShow Audio Decoder tab. On the left side will open with the VOLUME (volume) item to which you want to click the left button. On the right will immediately open the volume control that can be controlled at your own discretion.

Stereo Tool 7.

This program is designed to configure. sound frequency, Each separately and in general. Sound can be configured by different parameters (about 30 settings), for example, remove side noise. You can even listen to the radio online, regardless of the quality and speed of the Internet connection. Manage the program can easily manage both experienced users and newcomers in this matter.

A computer is an all device in which a problem may occur due to active or misuse. If a faint sound is not the consequence of this, and the case as audio or video, exist special programsallowing you to manage the sound, regardless of the parameters of the computer.

You can download them on official sites. The management of them usually does not require special skills, so it can easily cope with the task of a beginner user.

Wishing to view family video archives stored on a PC hard disk, you suddenly discover that sounded sounded. If you take note that your user knowledge is primary, you can imagine how difficult it is for you. Of course, you will not even imagine how to make a sound on the computer, and everyday experience only suggests that it may be possible to fix the situation. However, it was not there. Well, let's consider the basic ways to restore sound. Indeed, in this case, silence is far from gold!

Where to seek the cause?

Perhaps careless manipulations with files led to the removal of the sound driver. It is likely that the voice acting machine code "flew" spontaneously. The hardware part of the computer, and in particular it could easily fail. Recently installed program It may also be "the initiator of the game in the silence." Finally, the culprit of computer "notota" may well be a malicious virus. And this is not all possible reasons why many users have a question "how to make sound on a computer". From this point on, consider the situation more and with arising conclusions.

Banal inattention

In the service right "hanging" icon of the sound level. In the case when the "speaker" is displayed, the dismissive sign is framed, you must translate the slider up. Again, the crushing symbol in the form of an XPA means a malfunction audio device, that is, perhaps "flew" driver. Make sure that you are turned on. It is worth noting that the silence of speakers during video playback is often pronounced in the lack of multimedia codecs. In this case, it is recommended to establish a comprehensive package " K-Lite Codec Pack. " The installation process will require only several times press the "Next" button. However, opportunities and options, how to make a sound on a computer, grabs.

Device Manager - Fault Lighthouse

You must make sure that the sound driver is recognized as a correctly running software component.

• Go to the Start menu and go to the control panel.
• Open the "System" and activate the Device Manager item.
• In the window that opens, none of the items, but in particular "sound ...", should not be marked with a red cross or an exclamation mark.
• On the corresponding speaker icon right-click Mouse call and click on the designation "Properties".
• Pay attention to the window diagnosing device status. Usually, the operating mode is displayed by the string "... works fine."
• Otherwise, it is necessary to reinstall the audio driver, pre-delete the faulty component.

If the method described above did not bring an effective answer to the question "How to restore sound on a computer", proceed to the next phase of troubleshooting.

Visual inspection of computer

So, first of all, it is necessary to check the technical status of the speakers, the position of the cords relative to the corresponding audio input nests, and also make sure that the sound card itself is working.

• Mobile phones, as well as televisions and DVD players are equipped with a 3.5 mm connector. The user will not make much difficulty to connect speakers to any multimedia device in order to check for performance.
• Connecting wires and plug conveyors may also be damaged due to internal breaks and mixes. It is recommended to take advantage of ordinary headphones in order to compare test results.
• If your PC does not have an integrated sound card, make sure that the mounting of the "melodic" module installed in the PCI is made correctly and the device is properly destroyed in the connector.
• The ideal option is considered a "subframe" of a knowingly working sound card.

How to make a sound on a computer: BIOS settings

If your motherboard has an integrated, it is worth entering the BIOS and view the settings of the audio device.

• After turning on or reloading, press the "Del" or "F2" key several times.
• Depending on the type of your bios, the parameters of the audio device can be displayed in multi-line tabs. However, it is most likely that you will find the desired object in the Advanced menu.
• It is likely that in front of the device responsible for the sound there is a "disabled" parameter. Changes can be achieved by pressing the "ENTER" key, set the "Enabled" value. Perhaps you will get a long-awaited answer to the question of how to restore sound on your computer.
• Save the corrected setup editor and restart the computer.

If you managed to "talk to the numb electronics", it makes sense to programmatically improve the audio device.

Overview of the most acceptable software solutions: "Razer Surround"

The presented aggregator will improve the audio on the computer. It is worth noting that the soft is sharpened for gaming applications. However, this inconvenience is not at all reflected on the use in multi-faceted application.

• Install the downloaded software on the PC and run it.
• Go through short registration and enjoy an incredibly spectacular sound management agent.

"VOLUME"

The name of the program speaks for itself. The installed application allows you to qualitatively improve the comfort of playback management. One of the advantages of the software can be considered the possible assignment of the "hot" keys. In other words, the effective sound configuration on the computer is the program "Volume".

Certainly mentioned above the software is absolutely free. The only restriction ("Razer Surround") can act as the lack of computer hardware reproduce multi-channel sound of format 7.1.

Finally

Connecting sound on a computer, in general, - it's not a curious thing. However, given the existence of an incredibly complex audio, the user may encounter some difficulties. However, if you read this article, most likely, you will not be much difficulty finding the solution of all "uncommordable" problems, including connecting various equipment. Melodic implementations!

If you are not satisfied with the maximum volume of your headphones, but also buy new - with reduced resistance - no desire, then there are several simple ways Court to cope with this problem.

Check the quality of the connection

Perhaps on the device is not the corresponding connector or plug inserted loosely. It should be inserted with a characteristic click. In addition, if we are talking About the computer, then the corresponding icon will appear in the tray, confirming that the connection has passed successfully.

By clicking on this icon, set the volume to the maximum and check the sound. If you watch the movie or listen to music in an audio or video player, check the volume in it. Some programs, such as Media Player Classic, allow you to increase the volume even above 100% mark.

Recommendations: 10 best wireless headphones
How to set up headphones to play high-quality sound
, Pinout headphones

Check the settings

Go to the "Control Panel" Windows 7 and find the sound icon there. By selecting it, check the presence of headphones in the device list, as well as by clicking on them with the right mouse button, make sure that they are activated.

After that, double-click the headphs row to operate their properties. Next on the tab " Additional features"Install the checkbox next to the" Sound Alignment "string if it is not yet installed. Click "Apply" and Test Sound.

Check drivers

Make sure your device installed the latest versions. sound Drivers. An inappropriate driver either will not allow headphones to be recognized, or their functionality will be minimal. The most common problems associated with drivers:

• the bugs made by the developers (usually corrected with the release of new versions);
• the driver version is not suitable for a specific version of the operating system;
• driver conflicts with one or more multimedia devices.

Drivers can be updated through the official website of the manufacturer of headphones by choosing the model with which you have a problem. To do this, you also need to know the version of the OS and its discharge.

Exist special utilities To control the drivers that will do everything for you. For example, DriverPack Solution or Driver Booster. The program scan your computer will determine the models and versions of the connected devices and self drives the perfectly suitable drivers.

Before you, you can check the availability of problems with the drivers through the device manager (if there are exclamation marks near one or several items, it may be the cause of incorrect headphones).

How to use wireless bluetooth headphones

Use sound amplification programs

One of these programs is Sound Booster, but there are several similar. The software can raise sound volume up to 500% in some programs - Skype, audio and video players, Internet browsers.

It is convenient to manage the volume, you can do it with hot keys. It is also possible to put program data into autorun so that they appear in the tray immediately after the computer is turned on. If the program is designed qualitatively, it will not give sound distortion, due to the presence of certain filters.

Increase the volume of the individual track

To date, there are many programs that will help strengthen the sound of a particular melody, if only she plays quietly. For example:

1. Audio editors such as Adobe Audition or Sony Sound Forge. It is these two programs that are characterized by fast speed File processing and compression percentage. With their help, you can make any desired manipulations with the track, including an increase in volume.

2. If you need to strengthen the sound at several tracks at once, try the MP3GAIN program. She knows how to edit some parameters of audio records in a packet.

If I could not do anything programmatically, the problem is most likely in the hardware.

Spacking headphones

Possible reasons for low sound

The audio volume in the headphones directly or indirectly affect the following factors:

• current power in the area of \u200b\u200bturns, depending on the power of the amplifier of the audio card;
• resistance to the coil in the membrane;
• possible return of the diffuser (membrane);
• transitional resistance in sockets.

One of the most logical ways to increase the volume of the headphones is to increase the current flow. Speaking simple language, programmatically increase the volume. Ways to do this we have already considered. Please note that if there are crops and screens, the speaker simply does not support the volume you have chosen.

If programms do not give results, the problem is most likely in insufficient consistency between the output cascade of the amplifier and the resistance issued by the headphones coil. This is possible if the amplifier supports the load in 4 ohms, and the specific headphones are equipped with a resistance of 32 ohms. Then it remains only to think about the acquisition of another model.

You can also try to clean the sandpaper (zero) connector that serves to connect the headphone to the audio card. And do not forget to test headphones with another device to make sure the problem is in them.

Some users found another way for themselves - they connect headphones to the input on the speakers, and the speakers themselves in the sound card. It was noted that in this case the headphones sound much more loud.

How to connect wireless headphones to the phone

Increase the volume of headphones in the iPhone

Adjust the sound level in Apple phones and tablets using an embedded equalizer. Go to the settings and select "Equalizer". Select the finished "Late Night" option.

You connected headphones to a computer or laptop, but the volume is low, what to do? From this situation, we will go out in comprehensively, and consider all the options that can affect the volume of playing your headphones.

Check whether the latest sound card drivers are installed

The driver is a program that manages the work of hardware, i.e. whatever powerful video Or the audio card you did not set into the computer, it will not work at all. For any microcircuit or drive, a driver is required in the computer. Modern operating room windows system Contains thousands of drivers for a wide variety of devices, but they are not full. Drivers that contain Windows are intended only for the basic functionality of the device, roughly speaking, they are needed just that the device is recognized by the system and at least somehow worked. For full-fledged work needed official Drivers From the manufacturer of the latest version.

I recommend using the Snappy Driver Installer to update all drivers on the computer. This program automatically recognizes which driver you need to install or update, the driver itself downloads and itself installs it in the system. You only need to wait for the end of the program and restart the computer.

Council: Before using the program, do not forget to make backup Systems, I have never come in handy not yet, but God saves.

Check the technical parameters of headphones, especially pay attention to resistance

A very important parameter of headphones is the meaning of their resistance, which is measured in the units "OM". To connect to phones, I do not recommend using the headphones with a resistance above 32 ohms, although I would be the ideal value of 16 ohms.

To connect to ordinary computers and laptops, whose sound cards are not equipped with a powerful headphone amplifier, I also do not recommend connecting the headphones with a resistance above 32 ohms.

The higher the resistance of the headphones, the greater power There must be a headphone amplifier. If you connect high resistance headphones to a conventional built-in sound card you can get a quiet, loose and flat sound that can absolutely be called good or high-quality.

Many sound cards, even embedded in motherboardsThey have a built-in headphone amplifier, but you need to know how to turn it on, so that the sound in the headphones was loud and juicy.

Enable headphone amplifier on the example of Realtek built-in sound cards

Step 1 - Go to the panel windows management

Click the Start button, find the "Control Panel" menu and click on it. If you are using Windows 10, then click the Start button, then start to dial the words "panel" by Russian letters, turn on automatic search And in the first results you will see the "Control Panel" menu, click on it with the left mouse button.

Step 2 - Find in the Control Panel "Realtek HD"

Now in the control panel, find the "Realtek HD" menu, it can call somewhat differently depending on which version of the sound card is built into your computer and which version of the drivers you use, but in most cases the name of the RealTek chip manufacturer should be in the title.

Step 3 - Find the location of the audio output settings


Now go to the configuration of the audio outputs on the back of the computer. In the screenshot you see where they are located in my case, although in your, depending on the driver version or other sound card, these settings can be elsewhere.

Step 4 - change destination connections


Click on green audio output right-click and select context menu "Change destination connectors."

Step 5 - Install the connector the "Headphones"


Install the assignment of the "Headphones" destination and save the result.

All these manipulations are needed for the reason that it is necessary to enable the built-in signal amplifier in the sound card. Some sound cards include it automatically, while others are not. And to make sure that the amplifier will turn on.

Now, if the sound is still quiet, proceed to consider other probable reasons.

Configure Windows for loud sound in headphones

Now find the speaker icon in the lower right corner, click on it with the left and press it and make sure that the volume is exhibited by 80, 90 or 100%.

Even in this case, the volume of your headphones is still quiet, we have extreme means.

Increase the volume by aligning sound

Step 1 - Playback Devices


Find the speaker icon in the lower right corner, click on it with the right mouse button and in the context menu that appears, select "Playback Devices".

Step 2 - Select Speakers

The list of devices will be the "speakers" item, and the name of your sound card, in most cases it is REALTEK, but in my case it is Sound Blaster X-FI. Select this device, click on it with the right mouse button and in the appeared context menu, click on "Properties"

Step 3 - Enable Volume Alignment

Now find the "Additional Features" tab, and check the box in front of the "Volume Alignment" function, then click on the "OK" button.

After this operation, the sound in headphones should become louder, however, this feature significantly reduces dynamic range Sound, i.e. Quiet sounds become louder than they are in the record, and loud - quieter. Those. The sound card is trying to bring the volume of all sounds to some medium value. Therefore, I called this method by an extreme means, because You will get an increase in the volume of the sound due to the deterioration of its audio characteristics significantly affecting perception.

Increase the sound volume in headphones by equalizer

I consider this method with the most barbaric, because It makes strong distortion in the reproducible sound, up to the overload of the driver and the appearance of the cod and interference. But in some cases it can really help increase the overall volume of sound in headphones. But I do not recommend you to use it for long-term use, you will always hear seriously distorted sound, and this is not correct.

Find in the settings of your sound card graphic equalizer. I will show you on the example of my card - Sound Blaster ZXR, in your case the menu will look different, but the point remains the same. If you have a built-in RealTek sound card, then you need to get through the control panel to the card control menu.

Step 1 - Increase the overall volume with the equalizer

Please note, I raised to the maximum value of the extreme right slider. It is responsible for the overall level of volume, in this case I did not touch each of the frequency bands separately. Theoretically, it means that the sound should not be subjected to strong distortions when gaining. But, as I have experienced experience, not all graphic equalizers have a general volume controller, so I will show you how to achieve an increase in volume in the usual equalizer.

Step 2 - Increase the volume in the headphones by lifting the volume of all sound frequencies


Now I raised the volume of each regulator to the maximum level, but did not touch the general regulator, because In your case it may not be. Now the volume in the headphones should achieve the maximum value, however, I once again want to warn you that similar method I do not recommend using on an ongoing basis due to the strong distortion of the audio signal.

Increase the sound volume in active application

In the screenshot above, I showed the speed control of the sound in the game, as an example of how the sound is adjusted in the applications.

Almost every application, whether it is a music play, a game or player to watch movies, has its own volume control. Make sure it is set to 80, 90 or 100%. Of course, it makes sense to exhibit such meaning if the sound is still quiet, in the normal case, the volume level in the system must be set 100%, and in the application to the value that is comfortable for you.

So all methods known to me to increase the volume in the headphones. If none of the above methods helped you, then I have bad news for you, or headphones broke, or sound equipment, or you connect headphones with high resistance to the equipment that is designed to work in this mode.