Reinstall OC Windows XP Installing the printer. Windows XP: Installing the Network Printer. Other solutions solving problems for all versions of Windows XP and above

The printer driver is a connection between the computer and the printer that commands the command to communicate the printer, how to print. There are reasons for which the driver (Drivers) stops working. For example, damaged or incompatible, wrong settings No updates. DRIVERS error correction is often associated with updating, installation or reinstalling.

General instructions how to install a new printer driver

  1. Go to the printer manufacturer's website and search for printers printing for printers.
  2. Find suitable Drivers for your model.
  3. Load and install Drivers. You may have to restart the computer after installing a new driver.
  4. Reinstall software Drivers supplied with the printer is quite simple. Insert the disk into the drive and follow the instructions on the screen.
  5. You can update your Drivers using the Windows Update Center. After it windows installations Update will automatically download and install the recommended updates for your printer.

Here's how to configure it:

  1. Click "Start" in the lower left corner of the screen. A pop-up menu appears.
  2. Enter "Update" in the search bar, and a list of results will appear. Depending on your version of Windows, you may need to select "All Programs" from the first popup menu.
  3. Click the Windows Update Center and on the left pane, click "Check availability of updates". Depending on your version of Windows, you may need to select "Select the updates you want to install", then click OK.
  4. Then click "Install Updates" on the page Windows Update" Similarly, you may need to select "Viewing Available Updates", and then "Set" for the Drivers you want to install.
  5. Specify the password or confirmation if it is proposed. This will show that you are authorized to make this type of change. When the process is completed, a window will appear with the message that the driver is installed correctly.

To install and update Drivers HP LaserJet Pro. MFP M125RNW, download using the most recent drivers. You need to know the version of the printer model. After you have information, you can view the official HP website for your model. As soon as you find them, simply download and install them.

For example, the HP LaserJet Pro MFP M125RNW driver can be downloaded by reference https://support.hp.com/use-en/drivers. Click the link and locate the drivers according to the model type of your device, and then simply download the drivers.

List of compatible OS for HP printers

Operating systems: Windows 10 32-bit, 10 64-bit, Windows 8.1 32-bit, 8.1 64-bit, Windows 8 32-bit, 8 64-bit, Windows 7 32-bit, 64-bit, Windows Vista. 32-bit, 64-bit, 32-bit Windows XP, 64-bit Windows XP.

Mac OS X (v10.11.x), (v10.10.x), (v10.9.x), (v10.8.x), (v10.7.x), (v10.6.x) .

If there are problems with an error message: "The printer driver is not installed on this computer, some printer properties will not be available if you do not install the printer driver," then this problem may be caused by incompatible printer drivers. Remove the existing printer drivers on the server.

Try to take the following steps:

  1. Login to section with accounting Administrator.
  2. Click "Start" and "Control Panel",
  3. Open "Printers", then click "File", "Server Properties", go to "Drivers": Delete all the drivers present (when re-installed, they will be installed again)
  4. If there is still a problem, also delete the registry entry for printers. You can go to the next and delete all records.
  5. .
  6. .

Sometimes, you just need to get out of the print server and log in again so that everything worries. In addition, you can upgrade the print driver from the HP website, as is done above.

In the last article we figured out how to install a printer with installation disk In this we will understand how to be if there is no disc.

There are two options:

  • Download driver yourself.

Windows Update. Installs basic drivers. They only allow you to print and / or scan. Additional functions, such as image processing before printing, setting up colors and others - will be unavailable.

The advantages of the second way are that we download the most freshest software for the device and all specific functions will be available.

Under Windows, there is a huge base of software for almost everyone peripheral devicesincluding printing. We use it.

Connect the printer or MFP to the computer and wait a couple of minutes. It will be identified or defining the device and Windows will try to install the driver. Since you read this article, most likely, this method has not worked. Run the update manually.

We go along the way:

Control Panel\u003e Hardware and Sound\u003e Devices and Printer

Control Panel\u003e Equipment and Sound\u003e Devices and Printers

We click on the computer icon right mouse button and choose.

In the window that opens, click "Check for Updates" (update check).

Software search for your devices. If something is found, it is either downloaded and installed automatically, or you will need to give permission. In my case, everything is done on the machine.

You may need to restart the computer. Perform and see if the printer installed. If the device is installed, but does not print, I would connect it to another uSB port. (If the printer does not print in principle - you can see).

In order for the operating system to always automatically load drivers and pictures for connected devices, you can do the following.

Call context menu right-click on the computer icon and choose Device Installation Settings.

Now when connecting a new windows devices It will automatically search for a driver in its database.

How to install a driver from the update center (for example, HP 1015)


  1. We do not change anything. "Further"

  1. "Windows Update Center"

  1. We are waiting for downloading the list of available drivers.

    2. Choose "HP"\u003e HP LaserJet 1015\u003e Click Next ".

  1. "Further"


  1. Remove the installed device

We do not need the printer itself. We need software that is installed with it.

  1. We connect HP 1015 to the computer and wait until the unit "grab" the driver has already installed.


Setting function automatic updates In Windows 8 | http: //www.youtube.com/watch? V \u003d 5WN6VBS26GQ
Driver for Epson LX-300 under Windows 7 / 8/8.1 / 10 | http: //www.youtube.com/watch? V \u003d PBDHDJI4GPA
Installing the HP LaserJet 1015 driver through the Windows Update Center | http: //www.youtube.com/watch? V \u003d rcceyDylbji

Download and install manually (.exe)

Take for example HP Deskjet F380. If you do not know the model of your printer or MFP, then carefully examine the identification inscriptions on the housing. Also find the model can be on the sticker behind or below the device.

Download and install manually (.zip)

Installing a driver from another printer

Consider using the example of Windows 7 64-bit and xerox printer Phaser 3116.

On the site the manufacturer for this system is not. You can try from Xerox Phaser 3117.


Print with pleasure.

There is often a situation when the printer is not installed, although the system sees that new equipment connected to the computer. The solution to such a task requires a serious and competent approach, otherwise you will not be able to use your MFP. To install the driver to the printer, you should closely familiarize yourself with the ways to solve this problem, which will surely prove to you useful.

As a rule, on Windows 7 when connected to a computer of the new equipment, the system in automatic mode Finds the appropriate printer in its database. If it does not turn out, the system proceeds to the search and further download from the Internet using the update center. Those. In this case, Plug and Play is activated - the technology whose function is to quickly define and configure devices connected to the PC.

  • To install the driver for the printer you will have to turn on this system automatic search. To do this, open the window with the properties of the system using the intrastamine search, in whose field you need to enter the word "system".
  • Next in the new window on the left you should click on the item that opens additional system parameters.
  • Click the "Equipment" tab and click on the button called "Device Settings".
  • In the new dialog box, click on the first item, which will allow you to start the automatic search for the necessary drivers. Click on "Save".
  • Thanks to this uncomplicated method, there is a high probability that the problem of the "printer driver cannot be installed" will disappear.

If the printer does not set up the printer, then you should try to install and configure on Windows 7 through the "Task Manager". The fact is that for some reason automatic installation The necessary software does not occur when connecting new equipment to the PC.

  • To install the driver to the printer, you must start the "Device Manager" by clicking the right button on the system icon in the lower left corner and selecting the corresponding item in the list that opens.
  • In a new window, the newly connected equipment will be located in the "Other Devices" paragraph and will surely be indicated as unknown device. To solve the task associated with the fact that the printer could not be installed, you should click on this equipment Right-click and click on the "Update Drivers ..." item.
  • In the window that opens, click on the highest point, which implies the search for updated drivers in automatic mode. After that, it remains to wait until Windows 7 finishes the installation of the corresponding software for your printer.

Ways to solve the problem on Windows 10

If print devices are not installed on Windows 10, then you need to try to add a printer manually. To solve the problem related to the fact that errors occur when installing the printer, resort to further actions:

  • Click the notifications icon, then select the "All Options" section. You can also press the Win + I key combination and go to "Printers and Scanners" through the "Devices" section.
  • In a new window, click on the button that allows you to add a new printer, and wait a bit. It is desirable that the Internet in this case is included.
  • After that, the system may install the corresponding software on your computer and the problem when "drivers are not installed" will be solved, and possibly not.

If the drivers are still not installed, then you can try to make their installation manually. It should be noted that this method It can help not only for Windows 10, but also for other versions of this OS. In this case, you should upload from the official website of the manufacturer of office equipment last version By, unpack it and start the installer. Next, it remains to fulfill all the recommendations of the installation wizard, after which you to restart the PC and make sure your success is to solve the problem associated with the fact that the drivers are not installed.

Other solutions solving problems for all versions of Windows XP and above

If, with each attempt to make the installation of the drivers, you did not succeed, because The system is constantly refused to perform it, then it is possible, the case is in the OS itself. The fact is that it is possible on your PC installed too old version Systems that, in turn, do not support the printers of new models. To solve the task, download and install all available updates For the system from the official site of Microsoft.

In addition, if it is not possible to complete an operation related to the software installation for the printer, the source of the problem may be the service utilities that remain from previously installed devices. When trying to install new drivers, they can conflict with them. Delete through "Installing and Deleting Programs" all those components that belonged to old print devices.

It also happens that it is impossible to put the drivers for the device due to the fact that the system protective does not trust them, especially in that there are no subscriptions to Microsoft. As a result, the system simply refuses to install them ("The printer driver is not set to access"). To eliminate such an obstacle, open the system properties using clicking right on the My Computer icon and on the "Equipment" tab, click on the Drivers Signing. If you have a point that implies blocking the installation of unsigned drivers, then change it to the item "Warn - every time to offer a choice."
Sometimes when installing, Plug and Play error pops up.

  • In this situation, open the Device Manager and expand the list of equipment connected to the PC. Pay attention to the connected equipment that interests you - it can be displayed as an "unknown device".
  • To troubleshoot the problem, call its context menu by right-click and check the "Update Driver" item.
  • Click on "No, not now", after which, disconnect the printer from the PC.
  • Then you need to insert a disk with drivers and, checking the checkbox on the ability to automatically install the software, click on "Next".
  • Follow the instructions, and when a request to connect a USB cable to the device will appear, do it.

It also happens that the Plug and Play service is simply disabled and therefore drivers are not automatically installed. Open the "Run" window (Windows + R "), followed by the command" msconfig ". If this service does not have a tick, then install it.

The overwhelming majority of modern printers do not require a special installation procedure in Windows XP. If you turn on the printer when working with the system, connecting it to the computer, the operating system will detect it and make it necessary settingsSo that you can use it when working with Windows. After a short time required to configure, the new printer is ready for operation. However, sometimes the automatic installation may not work, and you will have to install the printer manually.

To install a new printer, as well as to check and configure the previously installed printers, you should open a special folder. All folders associated with the equipment and system settings are located in the folder. Control Panel (Control Panel). Choosing the Main Series windows menu XP, you start the conductor and open the appropriate folder. Learn more about working with this folder will be described below, but for now we note that there are two content viewing modes of the folder - classic and Web viewing mode. The default mode is the second mode. In this mode, the basic groups of control groups are displayed on the right side of the conductor window. Click the name icon Printers and other devices (Printers and Other Hardware) to proceed to work with printers, scanners, digital cameras, keyboard, mouse, game devices and faxes. In the conductor will appear icons denoting accessible tasks and various devices (Fig. 3.1). In this case, references to other groups of controls will appear in the taskbar. You can run the printer installation procedure by clicking on the appropriate link, but it is better to first go to a folder containing a description of all printers installed in the system and faxes.

Figure 3.1.

Click the name icon Printers and faxes (Printers and Faxes) to go to the folder to work with this equipment. By the way, if you use the classic view of the control panel, all the icons will appear on the right side of the conductor window when the main menu is selected. Control Panel (Control Panel). Double-clicking on the icon, you will go to the desired folder.

No matter how you open the desired folder, the icons indicate all printers installed on your computer will appear on the right side of the conductor window. In addition, the Wizard icon facilitating the connection of a new printer is located in the folder. In the same folder there may be fax icons that will be described below. If none of the icons are highlighted, in the taskbar you will see the setup command of the new printer. When you allocate the printer icon, commands appear in the taskbar to configure it (Fig. 3.2).

Figure 3.2.

Windows XP system allows you to connect multiple printers to a computer, so there may also be several icons. If the icon named your printer is present in the folder, then everything is in order, and you can print on a printer from any program running under windows control. If there is no such icon, you must perform the printer installation procedure. To facilitate this procedure, a special printer installation wizard is used. However, it should be noted that some manufacturers of printers, such as, for example, Hewlett PackardThe diskette or CD devices are provided containing your own printer software installer without using the Windows installation wizard. Although for such printers, you can use the wizard, in this case the printer support will be installed, built into windows systemand not offered by the manufacturer of the printer on the disk that applies with it.

To start the printer installation wizard, you must double click the mouse on the icon. Installing printer (Add Printer). The first dialogue of the wizard introduces you to the case and explains that this wizard step by step will help you install the printer (Fig. 3.3, left). Since it is not necessary to enter anything in this dialogue, we will immediately move on to the next dialogue. The transition to the second dialogue is carried out by pressing the button. Further (Next). The second dialog of the printer installation wizard asks you to clarify whether the printer is connected directly to your computer or this printer is connected to computer network, as well as your computer (Fig. 3.3).

Figure 3.3. The first dialogs of the printer installation wizard

If you want to connect a network printer, you should read the section of our book regarding network work In Windows, or contact the network administrator for help. Now we will look at the option direct connection Printer to your computer. After checking the box in the dialog, you will give the Windows command to automatically find and install the printer. Press the button Further (Next) to continue work. If the printer is automatically detected and installed, you skip several subsequent steps. If Windows failed to connect the printer, this will inform you about this corresponding dialog (Fig. 3.3, right). In this case, you need to specify manually all the options you need, for which click Further (Next). The following wizard dialog will appear on the screen, offering you to determine the port to which the printer is connected (Fig. 3.4, left). The same dialogue will appear immediately after the second dialogue of the wizard, if you have not installed the automatic printer search box. Usually used standard printer port LPT1 or port universal sequential tire USB. To facilitate the dialog, a standard connector is drawn to connect using the port LPT1,

Note the port named File. He describes virtual printerwhich can actually be absent on the computer. If you install a printer, specifying that it is connected to this port, then when printing on this printer will create a special file that you can transfer to another computer. If the printer is installed on this computer, you can print it. Thus, you can, for example, print on a high-quality printer from a computer to which such a printer is not connected. Really, the printout will be carried out at all.

Select the desired port by selecting it in the list, then click Further (Next) to continue the installation. After specifying the printer's port, the next wizard dialog invites you to select the printer model from the list (Fig. 3.4,). This dialog contains lists of manufacturers and models of printers. Select your printer manufacturers in the list by clicking on it. Then in the printer list, select specific model printer.

Figure 3.4.

If your printer is not in the lists, you should use a floppy disk or a CD, which must be included in the delivery of your printer. In this case, click Install from disk (Have disk). A selection selection dialog appears on the screen where drivers are located (Fig. 3.4). You can enter the path in the input field, and you can click the button. Overview (Browse) to select the desired folder in the dialog that appears. After specifying the address of the driver supplied on the disk, you will return to the wizard. Press one of the way the printer model, click Further (Next) to go to the next dialogue.

In the new dialog, the wizard will ask you to select a name for the printer, and will also offer to use it as a default printer (Fig. 3.5). As a name, you can use any name, but it is better to leave the name that the system offers you. If multiple printers are connected to your computer, all programs will print on the printer used by default. Of course, you can at any time you can change the printer used by default to another. Most likely, one single printer is connected to your computer, so you do not need to enter anything in the dialog.

Press the button Further (Next), and you will move to the following dialogue (Fig. 3.5). It indicates whether your printer will be used as a network. If your computer is installed on the network and other users will print on the printer, you should answer the affirmative. In most cases, the printer will not be used together.

Figure 3.5.

The new printer is practically installed. It remains only to check his work, printed something on it. To do this, click Further (Next) and go to the next dialog of the printer installation wizard. A dialog will appear, offering printing a test page to check proper work printer (Fig. 3.5). It is better to set the switch to the position allowing the test page, then click the button Further (Next) in the dialogue.

The last dialogue of the wizard will appear on the screen, in which the result of the work performed is summarized (Fig. 3.6). After that, you must check the printer. It must be connected to the computer, turned on and refilled with clean paper. If the printer is ready to work, click Ready (READY) to complete the wizard and install the printer into the system.

Master will finish work required drivers Will be installed, after which the print page will start printing on the printer. Trial print page is designed to demonstrate that the printer can work in Windows as well visual check Printer print quality. In addition, this page printed various technical informationRelated to the settings of your printer (Fig. 3.6).

Figure 3.6.

Upon completion of sending a test page, a dialog appears, asking you about whether the test page is printed correctly (Fig. 3.6). If you can read the printed text of the test page and the print defects are not visible, press the button approx of this dialog to close it. Button press Diagnostics (TroubleShot) leads to a call help systemhelps solve problems when printing. On this setting a new printer in operating system Windows XP completed.

Another icon appears in the printer and fax folder with the name of the printer's connected. Now that the printer is connected, it is already configured by default, and for most cases such a setting is sufficient. However, sometimes it is necessary to change the printer settings. To do this, select the printer icon by clicking on it with the mouse, and select the link printing preferences in the taskbar.

A printer setup dialog appears on the screen, which has several tabs (Fig. 3.7). Appearance The configuration dialog varies greatly for different types Printers, but among the parameters, most likely there will be several mandatory. On the first tab of the dialogue (Fig. 3.7), the orientation of the paper sheet is set, that is, it is determined how the seal will go along the short or along the long side of the paper sheet. In the list, you can select a print of several pages of the document on one sheet of paper. It is often used to save paper when printing drafts. Naturally, pages sizes will be strongly reduced. In addition, you can set the procedure for printing multi-page documents from the beginning to an end or vice versa. Changing the print order on some printers facilitates sheet assembly in the correct sequence.

Figure 3.7.

On the second tab of the dialogue (Fig. 3.7), print quality is configured and paper is selected. A print resolution is set, which determines the quality of the finishes received. Typically, this parameter contains the number of points printed on a paper segment equal to one inches. The more this value, the higher the print quality. Sometimes this parameter depicting the verbal description of the quality of printing. Set high average low qualityThe numbers are not used. Most printers have several paper sources, for example, for conventional sheets and envelopes. In the list located in the dialog, it is determined where the paper will come from. For some printers, you can select the type of paper used. If the printer supports color printing, you can choose between black and white and color printing.

For more complex printer setting, click the button. Additionally (Advanced). The configuration dialog will appear, which allows you to change absolutely all print options that can be configured in this printer model. However, in most cases, such a setting will not need.

Additional features with some printers are implemented using special programsLinks to which are on a separate tab of the dialogue (Fig. 3.7). With these programs, you can, for example, check the performance of the printer and in some cases restore it. Configuring all the parameters, click OK in the dialog to close it. It should be noted that changes in the settings performed by the described method will act when using the printer in all programs. If you have when working with some program, change the current printer settings by clicking on setting up from the print dialog, the changes will only be printed when printing from this program and cancel when you complete the work with the program. The next time you start the print setup program will be the same.

Good day Friends.

In general, the situation is as follows. The other day I brought me a miracle with my nubuck a laptop on which for 7 years !!! WORKS HR-SCHE (since 2008) and says: "Diman, what do you want to do, but put me firewood on XP. 7-ka is not particularly productive. Run 3 GB, so cut out, I did not succeed, some kind of Netheork Framevertor asks. " All threw and left.

If long to suffer, something will

Well, I think the garbage is a question, now we will do. . Net Framework. 4 pulled out, installed. All OK. It has come to install and then it began ...

As he requested to be requested to connect the cable, I performed this step and waited so much ... I waited ... I waited until I jumped up the mistake here is this.

Well, I think I still wait, it may still be started ... And there is no reaching up to 100% of the detection of the device, it spoiled me the next, no less excellent mistake. And what is the most interesting, the driver on the scanner was established ....

What you still need @

Emotions overwhelmed ... And how else said Ivan Vasilyevich from the movie "Ivan Vasilyevich is changing profession": "What do you need @?". Yes, nothing needs. Well, burn Khoronyaka, the king let go of her "... But I did not let me go ...

Well, I think, okay, since you didn't install the instructions so on the instructions, I can think the handles now I will put the driver and you will earn me ...

And after some manipulations in the last step, when you need to spit "ready", click and ...

Well, I think or skis do not go or I already ...

Spat on him and left until the next day. I began to look for answers on the network and except that the driver is molt and all that and in general the HP team is not the best drivers sculpting, well, I will not argue with it ... anything happens. But how can I put. Such a feeling was that the printer tells you: "Lomai ,. Fully broken "😆 😆 😆 Yes, yes, it was

I also disable antivirus, I think it can ... no ... all the same. Maybe the truth of firewood, I went to offsight and downloaded the most fresh III ... the same thing ... 👿 👿 👿

I just didn't have the words ... let me go drove the anti-viper to look for a virusnashka, maybe he happened that there was a virus to do some hole ... I found about 200, cleaned, I cleaned the driver again and all the cat under the tail ...

I think well, I'm fine, I call a friend, I say: "Listen, I can demolish Windows and put on clean." "What if it won't go?". I say: "Well, now I will try to install 7-ka" ... Iiii ... installed.

Eureka

As a result, in general, he also reached another boy, he, too, the pig stands, I say let you try to put it, installed the same, everything is fine ... I think I feel somewhere somewhere I contradicted.

I go back to the laptop, installing.NetFramework 3.5 SP1 and what do you think still installed before the last driver, Nothing passed.

So because of the version of this fable, it depends a lot, the driver will be set or not, you will break my head or not 🙂