How to work with Windows DVD studio. Windows Vista DVD Studio. All you need to record disks

Owners operating system Windows 7 have the ability to record a DVD disc using the built-in service. However, it should be immediately agreed that this service is not intended for serious operations with disks, but write down and make a small design DVD Studio allows.

It is also worth noting that in the home base version Operational windows systems 7 There is no such service. In the other versions to find it, it is necessary through the start and all programs to find the icon called the Windows DVD Studio. After its pressing, the window will appear, in which the entire functionality is located. this service. Here is the Add function to write information to the disk.

It is possible to add several files to the disk immediately, for which they should be highlighted by holding the Ctrl button on the keyboard. To edit the image procedure in the slideshow, you should use the blue arrows, thanks to which a specific image can be moved to the desired list position. If the user randomly added unnecessary file To record, you should use the removal command provided for such situations.

Some PCs are equipped with several recording drives, the choice of one of them is carried out in the appropriate section of Windows DVD. It is possible to rename the drive, for which the field is used for the name of the disk. In general, the functions described above will help write to disk. necessary informationwhich can then be configured directly on the disk.

To select the desired disk to edit, you should find the option parameters in the left corner of the window. This option makes it possible to change certain parameters for playing a DVD disk, set the proportions you need, as well as the format.

The service provides for the use of several disk playback parameters:

The start of playback from the disk menu, which will be immediately displayed on the screen when installing the disk into the drive;

Directly play video immediately after starting the disk, after which the menu will appear;

Play video in a continuous cycle.

In addition, the user can configure the proportions of the DVD disc at its discretion using either conventional proportions (4: 3), or a widescreen screen (16: 9).

Some have a special opinion on the recording speed to the disk, for example, the higher the speed, the worse the recording quality. It should be noted that there is no such dependence, but, as a rule, slow recording speed guarantees good disc readability in the subsequent.

When the recording setting is completed, you can start designing a disk design by setting up the menu and show slides. Standard solutions are available to the user, as well as the ability to independently create something new.

In the menu settings, you can configure the types of buttons, background image, as well as add a sound track if necessary.

After all operations with the DVD settings, the disc complete the process follows the recording command, which is in the lower corner on the right side of the window.

Recently, few people have been using disks for transferring and storing files, even portable plays of modern models are able to play video files from flash drives. But still the use of DVD has not yet extinct and many use such discs.

It is if necessary, to record such a carrier and may need a DVD studio. it standard applicationwhich is built into the operating system starting with the seventh series. Of course, to record disks it is better to use a specialized softwareBut if it is not on the computer, it is necessary to record in a short time, then this method is suitable. With the help of the studio, you can qualitatively write information to the media, but it is impossible to erase it from there, even if the disk is overwritten, such a functionality. But here you can still do high-quality project design. All these operations should be considered in detail what will be done.

Running program

To open the application work window, you need to visit the Start menu and select the All Programs item there. In the list that appears, you must find the Windows DVD Studio item and open it. After starting, the user will be presented the main working window, which is quite understandable to all users. The main functional buttons are convenient and accessible.

To add files to the project, you can simply use the functions of the document to copy documents or apply to this command "Add", which will open an additional window. In it and choose required files. To simultaneously add multiple files, it is convenient to use the selection feature. You can hold the Ctrl clamped for this or highlight objects with the mouse.

To adjust the order of files at your discretion, you need to use the arrow in the drop-down menu on the file. It appears when using the mouse key. Blue arrows change the position of the file with a slide view of the disk content, depending on the wishes of the user. If the project accidentally added an extra fileIt can be easily removed using the same drop-down menu by selecting the appropriate item. In this case, the document will remain on the hard drive, you can not worry.

After the project is fully formed, you must select a recording device. If there are several of them on the computer, then you need to select the one in the list of devices that inserted the disc. After that, the name of the disk is selected at the request of users. This is prescribed in the "DVD name" field. In principle, everything is ready for recording, but you can change some additional settings.

Extra options

After the main process setup process is completed, you can use additional, they can be found on the left side in the lower corner. Parameter item is located next to the introduction of the project name. Immediately configured the recording format, setting the disk proportions or playback characteristics.

The last option provides several settings options. The first item determines that in the future, when you start the finished disk, its playback will be
Begin with a demonstration to the user's disk menu.

The following option will start playing files, and only then will show the user a disk menu, as stated in its name.

When you select "Play Video Continuously," the user will immediately see the played files that will be cyclically played by each other, without demonstrating the menu.

Another paragraph of proportions allows the user to configure the file display proportions. This applies to video, and to pictures that will be shown in the form of a slideshow. Here you can determine the standard proportions 4: 3 or widescreen 16: 9.

When setting up video format, you will need to select a signal encoding system. There are two options for NTSC and PAL to choose from, but the first version of the frame rate is significantly higher.

Immediately you can adjust the disk recording speed. Many believe that it affects the subsequent quality of the recorded files, but the opinion is actually wrong. The quality of the record does not affect it, but the service life of the disc itself will be much longer if the recording speed is minimal.

During the implementation of the recording process, the program requires a hard drive to store temporary data. This directive can be defined independently by clicking on the "Overview" and selecting the desired location. The function is very useful if system disk little free space.
In the Compatibility tab, you can remove ticks from programs that can interfere with the disk recording process.

Design creation

After all required settings Playing the project itself is time to move to its design. This is done in the readiness window for recording. Here you can choose one of the already ready-made styles or create your own unique. For this, used horizontal menu At the top of the window. These sections allow you to adjust the set of options. For example, in the text menu, you can select your own style that will be applied in the disk menu, change the textbooks of the keys and add your comments.
To view all your fantasies in advance, you can click up the "View" button. If everything is in order, then you need to change the text, and if you need to modify, it is activated "not to change".

In the menu settings, you can adjust the background image or video, add music or change the design of the buttons. To use as a background photo or video from a computer, you must first add a background video using the View button. The same needs to be performed for sound File If necessary.

All this is visible in advance, as in the previous case, and is saved or refined. To save the created view for later use in the design of other projects, you need to click "Save as a new style". To show the photo slides, you need to choose accompanying music and add it. Here you can use several musical documents, the main thing is to determine the sequence of their sound using the arrows. Assign the photo change speed in the drop-down menu, and so that the duration of the demonstration coincides with the duration sound track You need to select an item changing the duration of the slide show, respectively, the duration of music. Immediately, the transition from one file to another is configured and if everything suits, the project is preserved.

Record

When everything is configured, you can write the project. This is done with the "Record" command, after which you need to wait for the end of the process. To save the project to the future, use the File menu and "Save As".

What prevents you know what surprises is preparing us Microsoft Corporation? Moreover, prior to the start of sales of the long-awaited operating system, and its components such as Windows Moviemaker and Windows DVD-Studio will no longer change compared to previous Vista assemblies. Let's take a look than you will delight the Redmendays of future users. Windows Vista.that are interested in digital video.

After installing the system, the first thing that attracts attention is the presence of four items in the launch panel, to one way or that relate to processing, creating and watching video.

Looks like Microsoft developers decided to introduce a positive experience of their Office in Vista, turning several scattered programs into the associated module complex. Now the user can, using the Windows photo album, select a material consisting of photos and video clips, make simple actions above the drawings and ...

press the Create Movie button.

Immediately the next module will start - familiar to everyone in its XP-incarnation of Windows Moviemaker. The files selected in the photo album are already located on the timeline, together with the transitions between them, chosen randomly. What we see is ready to publish a slideshow that can now be exported to any available format.

Moviemaker slightly different from its predecessor embedded in Windows XP. Timeline still consists of only one video facility that does not allow one clip on top of another; maximum amount At the same time added to the clip of the effects has not changed - they are still six. A little changed the composition of the embedded effects and transitions: in Moviemaker version 5.1 (Windows XP SP2), the number of transitions was 60, now they are 64; The number of effects equal to 24 increased to 49.

But first things first. Now we will capture video from a digital camcorder, and create a simple film. Only after that we will think how to publish our work. Perhaps, we will be able to create a DVD video disk, without using anything, except for the built-in tools ...

If the user is going to make a video capture, then the MOVIEMAKER start to produce when a digital video camera is connected to a computer connected to a PLAY mode. Although the program and familiar to pain, still it is worth looking into its settings. Team Service\u003e Parameters Open the program settings window consisting of three tabs. As you can see, the set of parameters is still minimal, and no changes are observed here.

On the first tab, one of the important items can be considered the time interval through which the program automatically preserves the project; On the second tab, the user can change the duration of the photographs when placing them on the timeline of the program, as well as the duration of the animated transition between them. Here the aspect ratio and television video format is selected. Last tab Contains the list of available codec programs installed in the operating system. What is interesting - any of them can be disabled by making it unavailable for Moviemaker.

Let's go to capture the video, for this I will execute the command Ctrl + R. (File\u003e Import with Digital Video Camera). Minimalism triumphs: field for entering the title of the cassette; Select the placement of the folder where the captured video will be saved; Selecting a saving format - all non-slip settings. Separately, let's just say about the formats: if the user has conceived an installation with a sharp / gluing video clips, overlapping effects, transitions and titers, then in this case it is recommended to select the first format in the list: DV AVI in a single file. The remaining two points (WMV is a single file and WMV with a split file to the scene) it is recommended to use if no installation is planned to be installed.

The next giant sizes window contains only two points, the choice of which depends on the wishes of the user: it is not necessary to merge at all hDD Whole cassette, if you need to capture only a short minute episode.

Finally, a window opened, where the capture will occur. The camcorder is managed here by standard buttons, there is also a customization time limit. If the user has chosen the first point in the previous window, you can safely press the button Start import videoAnd find more important things for the next hour and a half until the cassette is played and captured.

At the end of the capture, the received clip will automatically be imported into Moviemaker, however, with some features. Despite the fact that the program has created a single AVI file in the user-specified folder, the same file imported into the program looks like a scene. Broken not just on the time of turning on-off the camera (timecode), but in addition and on the optical sign (change of the picture).

If in the previous version of MOVIEMAKER, such a splitting of a file on the scene could be disabled by removing the check box from the "Create Clips After Finishing the Wizard" when writing a video from the device, or from "Create clips for video files" in the file import dialog, now video It is always broken into the scene, and it is impossible to cancel this operation. However, not scary. User at any time can combine the set of clips into one, highlighting them and runs from the context menu command Combine:

Although, honestly admit, do it there is no need, because installation involves cutting out unnecessary, uninteresting frames. And it is much easier to produce it if the video is already broken into pieces.

It is unlikely that someone, at least once, dealing with a digital video, did not try to create his project in Windows Moviemaker. A more simple process is difficult to imagine. Apparently, the developers are so satisfied with this simplicity that they decided not to add any, even cosmetic, changes to the program. Each element, each team remained in its own place. With the exception of...

With the exception of one pleasant thing: the ability to create a DVD video disk! To the worst joy of users, list available methods Publications of the film located on the left side of the program window, replenished with paragraph DVD..

Click on this point will be a warning (and where did you see Windows without system messages?):

After the affirmative response, a new module will be launched, which is now permanent registration in the operating system: Windows DVD studio.

As you can see, this program does not boast a large number of settings; Get lost at several points is not even hopeless newcomer.

Everything is extremely simple: in the "Select DVD Playback Parameters" field, a DVD construct scheme is selected, in the section "DVD proportions" - the aspect ratio of the video (aspect), and in the third - TV standard (PAL is used in Russia). To parameter "Speed dVD records"Pay attention, by and large, not required (except when viewing a DVD is planned on a player that cannot read discs recorded at high speeds). And to the "Location of Temporary Files" item should be paid attention to: this will help slightly accelerate the creation of a disc, it is miscalculated. The fact is that any video working with video during video processing is constantly referred to the source file, while recording the result in a new file. And, if the disk is very fragmented, or has low speed Rotation, work can slow down. To avoid this, click the "Overview" button and select another hard disk, not the one on which the source video is located.

In total, in the piggy bank of the program twenty diverse decoration styles, which should be enough in most cases.

Topics can be changed and though not without well-known tricks. DVD files are located in the Program Filesmovie MakersharedDvdStyles folder. It is necessary to replace them with our own - and no one can crush the author to use standard topics concentrated on the whole world. True, for this you will have to try hard, because most of the menu are collections of carefully fitted blanks consisting of graphic and video files. However, it is hoped that in the near future the network will appear the work of enthusiasts that will help to expand the work of the Windows DVD-Studio.

Greater minus DVD Studio: It is impossible to manually set the interval and place of layout of chapters (chaps) on the disc. The location of chapters in the film The program determines independently, guided by the same principle according to which Moviemaker breaks the video on the scene, namely, at the moments of changing the picture and turn on / off the camera. However, if the project contains two or more video files, then in this case the chapters will be the files imported into the project, and the intermediate chapters will disappear.

But back to work. An important part of it is the creation of your inscriptions in the menu. Do not leave the same faceless phrases "Unnamed", "View" or "Scenes"? Enter your text to the desired fields, and select the arranging font.

In addition to the inscriptions, the change is also amenable to video shown in the menu (by default, the program takes frames from the video imported into the project), the background sound, and the design of the buttons.

If the user added a folder with photos to the project, it is advisable to make some changes in the slide show parameters. First, choose musical accompaniment that will sound while displaying photos. When the melody is selected and the file is selected, it will be the best to mention the checkbox "Change the duration of the slide discharge, respectively, the duration of music", and not leave the value fixed. True, in this case you need to mentally compare the number of imported photos and the duration of the selected melody, and calculate the average display time of a separate photo. It is not good if the photos will fill with a mad speed or, worse, to deal with a long time on the screen, driving the spectators in the longing.

It should be remembered that at any moment you can view how the DVD will look like after performing a particular operation, changes in any parameter. Button View Always ready, by pressing it, the program will launch the imitation of the DVD video operation.

If, after such a viewing, the user remained satisfied with his work, you can move to the final stage: disk burning. Unfortunately, Windows DVD Studio does not create a DVD files on a hard drive of a computer, offering immediately burn them to an optical media.

However, fooling the program is easy: files ready for records on the disk are located in the temporary file system folder, but are destroyed when leaving the program. Thus, if the user simply wants to receive DVD files, it is enough for him to start the movie for the film inserted into the DVD-drive-driven disk, then remove the drive from the drive, without waiting for the start of the burning and not closing the program. At the end of the miscalculation, the DVD studio will reconcile to insert into the drive disk - this means that temporary files are ready; Now they can be safely copied to any folder, and used in the future at their discretion.

Time creating DVD. Directly depends on the number of source material and its format. The program during miscalculation not only recodulates all files in MPEG-2, but also processes all the effects that the user fill the project while working in Moviemaker. Test creation of a DVD video disk duration of 50 minutes took about two hours of time (original video - DV AVI, without blending effects and transitions; Occursted on a computer with AMD Athlon 64 3200+, 1024 MB DDR SDRAM).

At the end of the burning, the DVD studio will offer to repeat the operation. You do not need to be afraid of the next long wait - this time the program will only rewrite the most temporary files to the DVD.

Another anniversary: \u200b\u200bnot in the weekend setup dVD Parameters! Such "protection against the incompetent user" has turned a program to a tool that cannot be used because it does everything itself (although it is possible that the overwhelming majority of users are only waiting).

Note the disc fill indicator in the lower left corner of the window where the files are imported into the project:

The DVD studio believes that the video encoded with such a low bit rate can be considered high-quality. Maybe it is, if only it was not about amateur Shooting, with all its noises caused by a constant disadvantage of lighting, and dance of the operator.By creating a multiple DVD duration, it was found that the final bit rate of the film is selected by the program automatically, and changes in the range from 8000 Kb / s (with a disk duration 50 minutes) to 3901 kb / s (with a disk duration 150 minutes). The sound is always encoded unchanged: MPEG audio, 48000 Hz, stereo, 224 kb / s.

There is a reason for joy: the program does not always reset the video. To make sure that the file was prepared for a duration of 30 minutes with characteristics fully appropriate files created by DVD studio: it is MPEG2 video, 720x576, 25.00 frame / s, 8000 kb / s. As a result, the creation of a disk took only 10 minutes (undoubtedly it took so much time to create a menu), after which the source file was compared with the final. It is not difficult to guess - they turned out to be completely identical.

So, the created DVD video is ready to replenish your media collecting, which you can now exercise with a powerful tool built into Windows Vista - Media Center. It differs significantly from, their network has already published them. comparative reviewsAnd we still limit the series of screenshots.

The main thing and, perhaps, the only advantage of Windows Vista DVD studio is its very appearance as part of the operating system, and, therefore, free is (hardly anyone acquires an operating system for only one module for one module). In the rest of the other DVD studio more than modest in its capabilities, yielding similar programs Practically for each of the parameters. It is worth notifying - similar, but separate programs intended for the sole purpose: DVD-authoring. There are no such packages at all on an ordinary user at all, their cost is often approaching the cost of the operating system entirely, and to compare Windows DVD studio with a powerful authoring tool like Sonic Scenarist no one will ever become.

In Windows Vista, all users have made a wonderful gift in the form of a Windows DVD studio program. IN previous versions Windows did not have a program that allows you to create your own DVD movies, and users have had to acquire programs from other manufacturers. Now the owners of Windows Vista Ultimate and Windows Vista Home Premium have at their disposal a wonderful tool for working with DVD. The program has a very convenient and visual interface, to deal with which you can only in a few minutes. Well, after reading the cycle of articles on this program, you will get all the necessary information for quick and efficient work With Windows DVD-Studio.

You can run the program in several ways.

• Select Team Start\u003e Windows DVD Studio.
• When working with the program photo album, highlight necessary icons Photos and video files, then select the command Recording\u003e VideoDVD.
• As previously described, use the DVD switch in the Windows MOVIE Maker Film Publication Publication menu.
• You can also double-click on the previously saved Windows DVD-Studio project.

In any case, a familiarization window will appear on the screen, which briefly describes the main features of the program. Check the box No longer show this pageto get rid of the window at subsequent program launches, and click on the button Photo and video selection. The main program window shown below will open.

In the window interface There is nothing complicated. First, click the Add button to select multimedia files for the project. Select all the necessary files in the window that opens. They can be added one by one, re-clicking on the button Add And choosing from different folders or immediately select all the necessary files.

The icons of all files will be placed in the window. Adding images and video on DVD In order, in which you chose them in the previous window. When choosing one or more icons in the top toolbar, the buttons are highlighted Up, Down and Back to video. These buttons allow you to change file location. In addition, you can change order by dragging the mouse icon or clicking right-click Mice on the icon and choosing the appropriate command. For example, the team Delete Allows you to remove the file icon. To select several icons at once, click on them with the left mouse button while holding down the key .

On the menu DVD recorderLocated on the right side of the toolbar, you need to select the writing optical drive. Usually, required drive Selectable by default, but if several drives are installed in the system, select the letter of the desired drive from the list.

At the bottom left of the screen there is an indicator that allows you to find out the presence of free / busy space for DVD disk. As a rule, on standard disk DVD will fit 150 minutes of video recording, which, however, depends on the disk capacity and optical drive capabilities.