Windows smart screen interferes with working with files. SmartScreen Filter Messages. Disable SmartScreen inside Windows Store apps

Constant messages bother SmartScreen filter v Edge browser or Internet Explorer? There is a simple, proven way to get around these messages.

SmartScreen is a kind of tool that aims to provide additional protection for the browser. It works in both Internet Explorer and the new Edge. The tool is very useful if you want to improve the security of your computer. Unfortunately, it has its drawbacks - intrusive messages on how to activate the service in the browser.

Let's take a look at how to bypass the SmartScreen messages that appear. You shouldn't turn off SmartScreen filter completely, as it is very useful and protects your browser from threats from the Internet. Most likely, you need to try to do so as to minimize the appearance of intrusive messages from SmartScreen

How to clear messages in browsers

Let's start by introducing changes to Windows settings 10 using the Local Group Policy Editor. You can find it using the built-in search engine Windows 10. You can also call the Editor through the Run window (Windows + R) by typing the command gpedit.msc in it.

In the left pane of the Local Group Policy Editor window that opens, go to the following path:

Computer Configuration> Administrative Templates> Windows components> Internet Explorer "

- In the case of Internet Explorer

Computer Configuration> Administrative Templates> Windows Components> Microsoft Edge

- In the case of Microsoft Edge.

In both cases, after going to the browser folder in the main part of the window, we are looking for the item "Do not allow displaying messages from the SmartScreen filter". If you want to completely disable messages, use the option "Do not allow SmartScreen filter messages when there are unscanned files."

After selecting the desired item, double-click on it. A window with options for the specific command will open. Here you need to change the value from "Not set" to "Enabled" and save the changes by clicking on the "Apply" and "OK" buttons. Then exit the Local Editor window group policy.

You don't need to restart your computer, but if Microsoft Edge or Internet Explorer was open, you need to close and reopen it. The changes will take effect immediately after restarting the browser. The filter message boxes will disappear from the screen. However, SmartScreen will run all the time, but only in the background, without informing us about it.

Turn off SmartScreen Filter completely

You can also turn off SmartScreen completely using the Local Group Policy Editor. This feature is available for both browsers in the above path.

In both cases - regardless of which browser we use Edge or IE - look for "Turn off SmartScreen Filter" in the list. As in the previous case, double-click on this item, select the "Enabled" option and save the changes. Then restart your browser. The filter will now be turned off completely.

The same can be done in the browser itself. Let's start with Internet Explorer. Open IE and go to the Tools menu item. Then select "Internet Options".

After opening the IE settings window, go to the Security tab and select "Other". The Security Settings - Internet Zone window opens. In the list that opens, we find the item "Use SmartScreen Filter" and set the value to "Disable". Then save the settings and exit the browser. After restarting IE, the filter will no longer be active.

In Microsoft Edge, click on the three-dot button in the upper right corner, and then go to the "Settings" section. In the window that opens, scroll down and click on "Show additional settings". After opening another side screen, move down, and then disable the slider on the entry "Protect me from malicious sites and downloaded files using the SmartScreen filter." After restarting Edge, the filter will be disabled.

Disable filter in Windows 8.1 or 10

As often happens after reinstalling Windows 8.1 or 10, the user gradually installs all programs over the next days. Unfortunately, most of the time, a message is displayed on the screen that the downloaded application may be dangerous for your computer.

There seems to be nothing wrong with this, if not for the fact that SmartScreen connects to the Internet to verify the authenticity of applications and thus takes a lot of time from the user. Result? In the screen that opens, in which you can forcibly start, you still have to wait a few tens of seconds. To avoid this, you can turn off SmartScreen Filter.

Go to Control Panel and then open System and Security> Support Center.

V side menu select Change Windows SmartScreen Filter Settings. Another window will appear in which you need to check the options you need.

Select the last option Do Nothing (Turn off Windows SmartScreen). The filter is now disabled and a cloud will be displayed in the notification area with information that SmartScreen is not working.
.

Disable SmartScreen Disabled Messages

If disabling the filter means that it will not control running applications, then Windows will constantly notify us about this, and for the safety of the computer, we must enable it.

SmartScreen Filter is built into the Windows 10 operating system to help protect your computer by preventing potentially dangerous unidentified programs and files from running. Starting with Windows 8, SmartScreen is fully integrated into the Windows operating system, previously the Smart Screen filter was used in the Internet Explorer browser to protect the system from threats from the Internet.

The main purpose of SmartScreen is to warn the user about the launch of unknown programs downloaded from the Internet by blocking the action. The user will see a blocking warning message if an unrecognized file or application fails validation.

Windows SmartScreen operates based on a dedicated rating for apps, files, and sites. The file downloaded to the computer is checked in the cloud database on the servers. If this file is marked as unsafe, or information about the file is missing in the SmartScreen filter database, download or execute of this file blocked.

Information about executable files and applications is passed to the database for checking.

Operating Room SmartScreen Windows system performs the following functions:

  • protection against malicious applications - preventing dangerous programs from being downloaded to your computer
  • program reputation - displays a warning for programs with high level dangers
  • anti-phishing protection - protection against fraudulent sites

When downloading a file using Microsoft Edge and Internet Explorer browsers, the filter checks the file when it tries to download: blocks or allows the download. File loaded in other browsers ( Google chrome, Mozilla Firefox, Opera, etc.) is checked by the filter when trying to start.

The user independently decides what to do: agree with the opinion of the filter by clicking on the "Do not execute" button, or click on the "Execute anyway" button to run the file.

You can turn off SmartScreen Filter in step Windows installations 10, or at any other moment in the running operating system.

Configuring SmartScreen

The easiest way to enter SmartScreen Filter settings in Windows 10 is to enter “smartscreen” in the Windows 10 Search box. In Settings, select Change SmartScreen Settings.

In the Security and Maintenance window, click on Change Windows settings SmartScreen ".

In the Windows SmartScreen window, you can change filter settings. The following functions can be changed:

  • request administrator approval before launching an unidentified application from the Internet (recommended)
  • warn before executing an unrecognized application, but do not require administrator approval
  • do nothing (disable Windows SmartScreen)

By default, before launching an unrecognized application, a window will open for approval of the action by the computer administrator, with a message stating that the filter has prevented the launch of an unrecognized application.

Another option is less restrictive: you will see a warning before executing an unknown application, but it does not require administrator approval to run the application.

How to disable SmartScreen

In the SmartScreen settings, you can disable the filter in the Windows 10 operating system. To do this, activate the "Do nothing (disable Windows SmartScreen)" item, and then click the "OK" button.

In the "General" section, under "Turn on SmartScreen Filter to check web content (URLs) that can be used by Windows Store apps", toggle the switch to "Disabled".

After that, Windows SmartScreen will be completely disabled in Windows 10. If necessary, you can re-enable the filter on your computer.

Conclusions of the article

SmartScreen Filter protects your computer by warning you about the launch of unrecognized files and applications. The user can independently configure the filter, or completely disable Windows SmartScreen on his computer.


First, you need to decide what kind of beast this SmartScreen is and what it is for. This function has been introduced into use since Windows 8, its purpose is to provide protection to the user from launching untrusted files, dubious sites or downloading viral applications.

This filter is used by developers for certain parts of the system, mainly Internet Explorer and Explorer itself. Accordingly, the threats from which SmartScreen helps to protect itself differ, or these are files of a suspicious manufacturer, or sites to which trust has not yet been shown.

Now it is worth considering the algorithm for the operation of this function in your system, first using the example of a browser. Internet Explorer submits a request to the application database before loading and rendering the site. In the database itself, matches are looked for and, if they are, you will be presented with a window with a warning about the threat. Sites can get into the relevant database for several reasons, one of them is that this site is really engaged in the spread of viruses, the other reason is that this resource is little visited and SmartScreen has no reason to believe that the resource can be trusted.

Similarly, the explorer applications are checked, because in reality, any exe file, that is, executable, is capable of causing damage to the computer.

Any restrictions, even to protect the user, have another side, namely, they are very intrusive and not always justifiably block the launch of the application. In this regard, it becomes necessary to disable or at least limit the power of this function over the system. If you are not sure of your knowledge or have little skills in working with a computer, then you should think carefully about whether you should disable this protection.

As an alternative to this function, you can use other third-party counterparts that can better cope with similar tasks. Antivirus programs a huge variety, market leaders should be preferred, since they are always actively looking for and eliminating new virus code, respectively, the likelihood of encountering this problem will be reduced to a minimum.

Changing SmartScreen Settings Using Control Panel

1. Go to the "Control Panel" this is done either by using the "Start" button, or hotkey Win + X;

5. Choose the one that suits you and save the change.

Protection options

1. Ask for approval - this way you can decide whether you really trust the resource and whether you need the content enough to take the risk;

2.Warning - you will not have any interference from SmartScreen, but information about the dubious file manufacturer will be presented;

3. Do nothing - accordingly, in other words, complete shutdown functions.

Disable SmartScreen with Group Policy Editor

You only have this editor if Windows 10 Pro or a higher version is installed, since there is simply no such function in the home one.

1.Open the line "Run" to do this, press Win + R;

2. Enter the name of the service gpedit.msc;

3. After that you need to go to the "Computer Configuration" tab;

5.Now find "Windows Components";

6.Last station "Explorer";

7.Now you need to change the value of the "Configure Windows SmartScreen" variable by double-clicking;

8.In the left menu, you should set the state to "Enabled", and already, in the drop-down list "Parameters", set the active state to disabled.

Editing SmartScreen Settings Using the Registry

As always, in the end, there remains a surgical, that is, a manual method of changing the application settings through the registry editor.

1. Start the line "Run" use the hotkeys Win + R;

2. Set the word regedit;

3.Now follow the path HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer, without changing anything extraneous;

4. You need a parameter that is responsible for the state of our function, it is called SmartScreenEnabled, open it by double clicking;

5. There are 3 types of possible values, they are presented in the same order that we have already considered: RequireAdmin, Prompt, Off.

For consideration, there was the last case that takes place in the life of a PC user.

Since SmartScreen checks all Urls, it becomes necessary to disable this filter, because it can block correct work applications.

Disable SmartScreen for Apps

1. You should open "Options", this is done from the notification panel or Win + I;

2. Go to the "Privacy" window;

3.On the "General" tab, you will see an option, the name of which speaks for itself "Disable SmartScreen Filter ...".

On this, all the problems associated with the filter should be resolved. Do not focus all your attention on, at the expense of reducing security, since Microsoft did not develop this feature by chance, which means it has a place in your Windows.

If you still have questions about SmartScreen - what is it? Changing the settings and disabling SmartScreen ", you can set them in the comments


if (function_exists ("the_ratings")) (the_ratings ();)?>

SmartScreen is a filter built into Windows system... It blocks the launch of suspicious applications on the PC. But in some cases, it is required to turn it off due to false positives, as well as due to the use of third-party anti-virus software in order to avoid software conflicts. How to disable Smart Screen in various Windows versions, read this article.

Windows 10

Method number 1: Disconnection through the Defender panel

1. In the tray (taskbar), click the "arrow" icon.

2. In the window that opens right click click on the Defender (shield) icon.

3. Click the "Open" command (left-click).

4. In the Defender window, click "Options".

5. In the search line of the section, start typing the name of the filter - "Smart ...". When prompts appear, click on them.

"Enable and disable ...": the option is required in order to disable the filter for software installed from the Windows Store.

In the "Change settings ..." panel, click the highlighted radio button. If this option is disabled, the system will not check the web content (links) used in the Microsoft Store software.

“Change parameter…. »: Enables global shutdown.

After clicking the section in the tooltip block, the "Center ..." window will open. Click "Change ...".

Under the request text, select the answer option "Do nothing ..." and select "OK".

Enabling is performed in the same window. To activate, click on "Security" and click on "Settings ...".

Set the "Warn ..." option. Click "OK".

Method number 2: adding an entry to the registry

1. Press the combination - "Win + R".

2. In the "Open" line, type - regedit. Click OK.

3. In the right pane, use mouse clicks to go to the "branch":
HKEY_LOCAL_MACHINE → SOFTWARE → Policies → Microsoft → Windows

4. In the Windows directory, open the System folder.

5. In the adjacent panel on the left, right-click on the blank workspace.

6. Open "DWORD Value (32-bit)".

7. Type the name "EnableSmartScreen", set it to 0. Save the entry.

8. Restart your PC.

Method number 3: in the Task Scheduler

(only for Enterprise and Professional editions)

1. Call the "Run" window by simultaneously pressing "Win + R".

2. Enter - gpedit.msc. Click "OK".

3. In Scheduler, open: Computer Configuration → Administrative Templates → SmartScreen ...

4. The directory contains folders "Microsoft" and "Explorer".

In their lists of options, you need to deactivate "Configure ... SmartScreen ...".

Left-click on it. And in the "Customize" panel, set the value to "Disabled".

Method number 4: through the Control Panel

1. Right-click on the "Windows" icon.

2. Select "Control Panel".

3. Set the "View" setting to the "Category" view.

4. Click on the "System and Security" section.

5. Go to “Security Center…. ".

6. In the menu open "Change settings ..." and make the necessary settings.

Windows 8

Click on the "checkbox" icon in the tray and select "Open Support Center". Open the filter settings (list on the left).

Windows 7

  1. Run Internet browser Explorer.
  2. In the upper right corner of its window, click the "gear" icon (Settings).
  3. Hover the cursor over "Security" and in the submenu that appears, click on / off SmartScreen filter (depending on the position of the option switch).

You can deactivate SmartScreen for a while so that it does not interfere with the installation of any program or game, or it can be completely disabled. But at the same time, you must be 100% sure that installed antivirus fully monitors the activity of files, including running installers. Otherwise, there will be a threat to the security of your PC.

SmartScreen Filter in Windows 10 helps protect your PC from suspicious, malicious apps and files. Additionally, SmartScreen Filter may also display a warning message when trying to launch an unrecognized application. Smart Screen uses technology cloud computing Microsoft for quickly detecting, warning and blocking potentially unwanted applications. Typically, you can easily turn off the SmartScreen filter for unrecognized apps with just a few clicks and launch the app or file as needed.

Disable SmartScreen in Windows 10

1. Using Windows Security

The easiest way to turn off SmartScreen Filter is to use the options provided by Windows Security Center. Built-in antivirus Windows Defender allows you to control SmartScreen settings for applications and files, Microsoft Edge browser and Microsoft Store apps separately.

Step 1... Open " Options" > "Updates and security" > "Windows security"> Open Service" Windows security"

Step 2... Next go " Application / Browser Control"and on the right you will see that SmartScreen is turned on to warn for all three categories. To turn off SmartScreen completely, you need to select Switch off in all categories: Checking apps and files, for Microsoft Edge, for apps from the Microsoft Store.


2. Using the Group Policy Editor

For system or network administrators, Windows has a specific policy setting in the "Group Policy" editor to quickly disable SmartScreen in Windows 10.

Step 1... Press the button combination Win + R and enter gpedit.msc to open Group Policies. In the editor, go to " Computer configuration" > "Administrative Templates" > "Windows components" > "Conductor"and on the right, find and double-click on the policy" ".


Step 2... In the settings window, put Disabled to turn off SmartScreen Filter. Restart the system for the changes to take effect.


3. Using the registry editor

Home Windows users 10 Home will not have access to the Group Policy Editor. However, you can use Registry Editor to disable SmartScreen Filter. Before editing the registry.

Step 1... Press Win + R and enter regedit to start Registry Editor, then navigate to the following path:

HKEY_LOCAL_MACHINE \ SOFTWARE \ Policies \ Microsoft \ Windows \ System

Right-click on an empty space with the right mouse button Create > DWORD32 parameter (32 bit). Give a name EnableSmartScreen double click on it and set the value 0. Reboot your PC.


Step 2... If you need turn on SmartScreen back then set the value 1 for EnableSmartScreen... Next, you need to set the blocking level. To do this, right-click in the right pane and select New> String parameter"and name it ShellSmartScreenLevel... Then just double click and set the value:

  • Warn- displays a warning, but you can bypass it.
  • Block- displays a warning message and blocks the launch of an application or file.

Once you're done, reboot your system.