Make a boot disk via nero. How to burn a Nero boot disk? Breed the Nero program

If you are not sure about your abilities, using the materials of this article, you can find out how to record ISO image Windows 7. or Windows 10. (The process is the same for both versions of Windows) on a DVD disk using the program Ultraiso., Nero. or freely distributed program Burnware Free..

Introduction

Disk image - This is a special format file that contains all contents of a CD or DVD disk.

You can draw an analogy with the RAR or Zip archive.

In this case, we consider ISO Image. ISO (.iso) is a generally accepted format with which most programs created to record information on CD and DVDs can work.

Ultraiso also can record ISO image of Windows. 7 or Windows 10.

You must correctly select the pretenuation of the Windows distribution kit that you are going to write to the disk for the subsequent installation of Windows.

How to write an image in ultraiso

If you have not yet installed the Ultraiso program, you can download it on the link above. Then you need to install it. The installation is very simple and runs literally in 3 clicks with the mouse. You can leave all settings (checkboxes) by default.

  1. The program is paid, but you can use the trial period. In the window "Welcome!" Simply select the appropriate item - Trial period ... (picture 1).


    Picture 1. Trial version Ultraiso is enough to record ISO image of Windows 7 or Windows 10 on the disk

  2. After starting the program you need to select the menu item "Tools" → "Record CD ..." (Figure 2). Not properly Just dragging the image to the list of files, because You write the image file, and we need to write it content On the disk so that it turns out the boot.


    Figure 2. Select the "Tools" menu → "Write an image of the CD ..." to write an ISO image

  3. In the recording window that opens, use the button «...» As shown in Figure 3, select the ISO image on your hard disk.
  4. It is important to choose the disc record speed correctly. If you use a rewritable disk (DVD-RW), then you can leave the maximum speed. Otherwise, it is better to set the speed x4 or x8 (for old DVD drives it is possible and less) to minimize the risk to spoil the disk when recording.


    Figure 3. Use the "..." button to select the image file on your computer.

  5. Click on the button "Record" (It is circled in Figure 3).
    When writing to a rewritable disk, formatting will be formatted, which will take additional minutes.
    Wait for the end of the disk recording - the program will appear in the program (see Figure 4)


    Figure 4. Disk recording results using Ultraiso.

  6. The disk with Windows 7 or Windows 10 is ready to install.

    7. Record the image of Windows 7 in BurnaWare Free

    BURNAWARE FREE is a free and high-quality program for writing data on CD or DVDs. Consider how to write a Windows image with it.

    1. First of all, install this program on your computer and run it. (Figure 5).


      Figure 5. Main menu Burnaware free.

    2. You will see the item called " Write an ISO image", Click on it. After that, the following window opens:


      Figure 6. Selecting the image of Windows 7 to record

    3. Specify your file image. To do this, click "Select".


      Figure 7. Window Selection of the image of Windows 7

    4. If there are several CD / DVD drives on your computer, you need to specify in the string "Drive-purpose" - The one in which an empty disk is inserted. Settings in paragraph "Options" It is advisable to leave unchanged.
    5. To start writing an image, click "Record" In the upper right corner of the window and wait for the end of the operation.
    6. If an error has appeared "Disc is not inserted"Make sure you choose your writing your writing drive and have not forgotten insert a clean drive.


      Figure 8. Message about the absence of a disk in the drive.

    7. After the record is completed, the disc is ready for windows installation 7 or Windows 10

    Writing Windows 7 Image in Nero Burning

    Nero Burning ROM. - Very famous and proven program for recording disks. If you have exactly it on your computer, then below you can familiarize yourself with the actions that need to be performed to record the image of Windows 7 or Windows 10 for the subsequent installation.
    1. First of all, install this program on your computer and run it (Figure 5):


      Figure 9. Start recording a disk with Windows 7 or Windows 10.

    2. And first click "Cancel", followed by main screen programs.



      Figure 12. Setting the disk recording settings
      The first tab "Info" gives only brief information About recorded project. The second entry tab has a number of settings. Consider in more detail those required to record our image:

      - Record.

      - Recording a disc (Inclusive by default).

      - Finalize CD - For this mode, this function is not active, the disc is finalized automatically.

      - Record speed - Selects the recording speed to the disk.
      The recording speed is automatically tuned from the maximum speed supported by a pure CD. The value of this parameter depends on the type of CD recorded.
      Right choice Speed \u200b\u200bis needed to minimize the risk of errors when writing a disc, so it is better to wait longer, but write a disc without errors. We have already written above that if you use a rewritable disk (DVD-RW), then you can leave the maximum speed.
      Otherwise, it is better to set the speed x4 or x8 (for older DVD drives, possibly less) to minimize the risk of damage when recording.
      Also carefully look at what maximum recording speed is indicated on the disk itself (for example: x2, x4, x8, x16). It is better to divide this speed by 2 or 4.

      - Number of copies - The number of disks you want to write at the same time.

    3. After selecting all installations, click "Burn" to record our image.
    4. Installation windows disk Ready!

    Why is it better to use third-party programs to write an image, and not embedded Windows 7 mechanism

    Starting with Windows 7, WinODWS has built-in CD recording mechanisms or DVD discs.
    But the quality of them leaves much to be desired.

Recording data to the disk is nothing difficult, but how to write an image on the disk, so that after the burning it turned out full boot diskwhich is enough to insert into the drive and proceed to installing a particular application.

As always, everything is elementary and simple, just need to use the application specially designed for these purposes. This article will discuss how to record an ISO image to disk using such utilities as Nero and Ultraiso.

To begin with, we will understand how to record with Nero.

1) We launch this software using the NeroExpress label and select the last item "Image, Project, Copier". And then "disk image or sorry. project".

2) We are looking for the image you need for.

3) Let us give a team to burn with the "Record" button and wait until the process is completed. It takes a few minutes, it all depends on the size of the image.


In this way there is a big minus - after recording, you will not be able to use this disk as a bootable, an additional software will be needed to open an ISO file.

Best to write an ISO image to use ultraiso programIn this case, you will receive a full-fledged boot disk from which you can easily install any application without using third-party. software, it seems.

To record an ISO image on the disk, run Ultraiso, go to the "Tools" tab and select the "Record the CD image" item


In the window that opens, select the "Image File:" and looking for the file to write.

It is also worth changing the speed on which the burning will be performed. By default, it is the "Maximum" value, at such a speed there may be errors when recording, it is better to choose the value that is written on the disk, but if the time does not press, then the smaller - 4x (600rb / s).


Although in this case, the value of burning and will be performed much longer, but the likelihood that something will not pass will be minimal.

It remains only to click on "write", wait a couple of minutes and get your boot disk.

Now you know how to burn an image on the disk. If any difficulties arise or you consider that the article is not complete, leave your comments. Successful recording!

But pro recording There is no more about it today ...

You can write different ways And on this we consider 2 ways, the most popular and reliable! So what to write an ISO to the disk:

How to write an ISO image to disk using Nero

ISO Disk image has become the most popular format of images, each game or a large program in torrent is packaged. And to install or unpack it or write to the disk.

I use Nero Micro, nothing superfluous, can download from my cloud:

When installing, you can immediately install Nero Express immediately, it is enough to produce an ISO entry.

After installing and running a program to write an ISO image to a disk, you will see the menu. With it, it is possible to record both music and video and regular files, but we will need an image point - recording the image.

We choose and left only to choose the speed so that the recording occurred qualitatively. To do this, click on the checkbox and choose the minimum record itself. Then the recording button! And all the image, in a couple of minutes it will be on the disk.

Record ISO to disk using Ultraiso

This program is good because it can record the image both on the disk and on the USB flash drive, and more advanced functions has for this. Download Install ...

After installation at the bottom of the program, select your image.

Then click tools - Record the CD image.

Next, select the minimum record for quality. If you select not disk-at-once, and Track-AT-Once, then the disk can be adding, but note that some devices may not read a multisession disk. Well, everything else should be chosen. Write!

After recording, the image will be recorded! With these 2 programs, you can burn an ISO image on a CD or DVD disc!

Often the need to load on a PC or laptop an alternative shell instead of the installed operating system. In such a situation, it is impossible to use the boot disk. Among other things, it can come in handy and when transferring data, carrying out tests of components, treatment of viruses. However, not every user is familiar with this process, and sometimes does not even know how to create a boot disk in Nero. Meanwhile, everything is quite simple, and for this you need to install the necessary software, purchase a clean drive and have a boot disk itself or its image.

Breed the Nero program

To create a boot disk using the Nero program, you need to download it from the Internet and install yourself on your computer. It weighs not much, so there should be no problems with this.

Write the boot disk

Before making the Nero boot disk, you must insert it into your computer and run the Nero program. After the program menu opens, it is necessary depending on the type of disk, select a CD or DVD project. And in the "Project Type" paragraph, select "Creating an Image". Because exist different versions Programs, then projects may be called differently, but you must choose the one in which there is the word "image" or an ISO abbreviation. You should try to choose discs with a large volume, because usually standard disks for 700 MB to record all the necessary information is missing.

Then in the Source section you need to select optical drive, and as a receiver choose hDD And click "Next". As a result of these actions, the copy window will appear, and after which the dialog box appears, where it will be necessary to specify the location of the image. You should select the desired folder and give a name image. For convenience, it is better to create a folder on the desktop, so it will be easier for you to find it in the program through the conductor of the files.

After clicking on the "Save" button, the program will start copying the disk and creating its image. You must wait for the program to display a message to the screen, that "burning successfully completed". After that, you need to pull the boot disk from the drive and insert clean, but similar by type, that is, CD or DVD. Now you should select the "Write an image to disk" project, specify the path to the previously created image on the hard drive and wait for the "Burn successfully completed". After that, the boot disk will be ready, and you can use as the main media recorded information.

Now you know how to write the Nero boot disk, and you can make copies of any discs with the most diverse data. It can be games, music, movies, programs and tests. After all, Nero creates an exact copy of the disk, allowing you to set a similar name in the settings and other important parameters. Besides, this program Can make images of games that constantly require disk inserts when it starts, but the next time you do not have to do this.

How to burn a boot disk with Windows 7 - Instructions

Write a boot disk with Windows 7 is not difficult, but still some users personal computer There may be problems with this. In this article we will tell you how to write a boot disk with the help popular programs Nero and Small CD-Writer.

Choosing a distribution

On the Internet there are many versions of Windows 7. Some of them deserve praise, others do not cost your attention. In order for your computer to work correctly, without "glitches" and interruptions, we recommend downloading and installing the original distributions of Windows 7, without any changes.

You can download such a distribution from the official website of Microsoft.

Unpacking the distribution with the operating system

After downloading the boot distribution of the Windows 7 operating system to the computer, unpack it if it was in a packed form (files with extension.zip, or.rar). To create a boot disk, we will need DVD-R / DVD-RW discsSince the Windows 7 distribution takes place in about 4 GB data and on CD it will simply do not fit.

You should not record at high speed, when downloading such a disk, the data may not be read and you cannot install the operating system!

Record the operating system image using the Nero Exspress program

Nero Express program - one of the software leaders for recording optical disks.

Insert the clean "DVD" DVD-R / DVD-RW into our drive and run the program.

In the starting window, you will see several menu items, but we will use the "Image, Project, Copier" item, and the submenu item "Disk image or saved project".

By selecting the type of record, the program will ask you to specify the location of the downloaded image. Having done this click "OK".

In the next window, the wizard will ask you to select the disk recording speed. For loading disks, you should choose the speed of about 10x-12x, but sometimes the speed is better to use it in less, especially if you have discs from a little-known manufacturer.

By selecting the speed and clicking "Record", the program will create a boot disk from the distribution image.

Small CD-Writer

If you, for some reason, can not or do not want to use the Nero Express program, then we can recommend a simpler and convenient program.

The SMALL CD-Writer program interface is very simple.

To record with this program, select "Disc" in the program menu and "write an ISO image to disk in it." Having done this, click "Record" and wait for the end of the procedure.