How to make the volume on the iPhone above. How to increase the volume of music on any iPhone. Phone hardware fault
Electronics manufacturer Cooler Master It has whole line Hardware products such as keyboards, power supplies, headsets, computers housing (PC), mice and, of course, coolers. Each of its products was specifically designed on the basis of community feedback. Including keyboards. Cooler Master even had a KickStarter project - an analog keyboard with pressure-sensitive keys, called Contolpad. Taking into account this, let's look at what can do new keyboard Cooler Master SK621 special for the user.
Keyboard News: Cooler Master SK621 Overview - Mechanical Wireless Keyboard with a separate connection connection option.
The first thing is noticeable when reviewing, it is the possibility of convenient pairing of a wireless keyboard with three different devices. Connect the device as easy as you hold the function button and z, x or C. Thanks to this function, it is very easy to switch from using your phone to a computer. Enable Cooler Master SK621 keypad is also simple. Either connect it through uSB cable Type-C, or on the left side, activate a very simple switch to wireless mode.
Specifications Wireless Keyboard Cooler Master SK621:
You can display a wide variety of colors (shades) to any key, configure lighting modes or customize macros using Cooler Master software.
When you first use SK621, it is recommended to connect to a computer through USB Type-C And install Cooler master portal. This will control the various light effects and settings of the wireless keyboard. It is possible to create pre-installed profiles, which simplifies switching between profiles when using items. You can also adjust light effects using control elements, but the above-mentioned portal is more convenient for the user. Setting up a wireless keyboard is very easy to use and has many combinations. There are options - adjusting the speed, direction and brightness of the keyboard illumination effects.
Macros can also be programmed. It is also worth adding that all functions, such as RGB-backlight, macros and controls are available and when using SK621 via Bluetooth connection. Time autonomous work The wireless keyboard is also impressive. It can pass a couple of full working days before the indicator lights up red, showing that the battery is discharged. Charging the Wireless Keyboard SK621 is also light. Just connect the keyboard via USB Type-C. The keyboard can still be used as a wired keyboard while the cable charges the keyboard battery.
The keyboard housing is made of polished aluminum, which makes it easy, durable and provides excellent appearance. There is also a pleasant smooth focus on the edge of aluminum, which adds a note of elegance. The keys are made of plastic and do not have a special texture.
Cherry MX low-profile keys are quiet enough for use in the office. The key switches are incredibly sensitive, and using the Cooler Master SK621 wireless keyboard requires some practice. This is because the keys record the press with an accuracy of a millimeter or less.
The SK621 keyboard is designed compact, it is quite portable. A pleasant addition is the velvet bag. It is definitely created for games thanks to the Cherry MX keys, but it is easy to use to work.
Cooler Master SK621 does everything for which it is intended. However, the keys are great for games, but too sensitive to the text set. Plastic keys are also susceptible to the formation of oil spots on the fingers, so the meal during the game can be difficult. Perhaps if the keys had some oil-resistant or more texture, oil prints would not be as pronounced.
Features Wireless Keyboard Cooler Master SK621:
Matte aluminum case design;
Flat Matte Aluminum Keyboard Top Panel, Swimming Key Caps and Slim Minimalistic Case Design.
Color keyboard backlight (RGB LEDs);
Individual illumination of the LED keys and the surrounding LED ring with the possibility of individual setting.
Hybrid wired and wireless;
Connect up to three devices by wireless technology Bluetooth 4.0 or wired connection And simultaneously charging the battery.
The minimum keyboard layout by 60%;
It can be said that this wireless mini keyboard has a unique design for maximum portability.
Easy to use software.
Low profile keys Cherry MX;
A reduced distance of movement and a response point functions with the same durability and accuracy (according to the application of the manufacturer of the wireless keyboard).
Available controls;
Real-time, you can configure keyboard backlight and macros without the need for software.
Resume Wireless Keyboard Cooler Master SK621:
In general, the manufacturer of electrical engineering and Keyboards Cooler Master exceeded all expectations. This is especially impressive due to the fact that he can do a really interesting wireless keyboard. The model SK621 has a set of light effects and individual settingIt has a compact design and mass of functions convenient for the user. Using SK621 at work, and then returning her home for games can make a gadget beloved wireless keyboard For the price, almost $ 200.
The Swiss High School of Technical School Zurich (Eth Zurich) announced the details of "concrete choreography", the installation that was recently opened in Roma, which is in Switzerland. An innovative installation represents the first robot-built 3D-printed concrete scene consisting of columns made without formwork, and printed using 3D printing technology for a full height in 2.5 hours. This process is expected to significantly increase the effectiveness of concrete structures while simultaneously achieving the manufacture of complex components of materials and construction robots.
News 3D printing: ETH Zurich creates concrete columns using a special 3D printer for printing from concrete.In the Swiss Roma, the Origen festival has nine columns 2.7 meters high. Each column is printed with concrete in a 3D format. New columns were individually designed using special software and manufactured using a new automated process of 3D printing from concrete developed by the ETH Zurich command with the support of NCCR DFAB.
3D printing from concrete like this
Students studying a magistracy in the field of digital production and architecture, investigate the unique capabilities of the method of multilayer extrusion printing, demonstrating the potential computer design and digital manufacturers for future construction of concrete. Perhaps the construction industry this process In the future, it will become more environmental if the new eco concrete will be developed for 3D printing.
Video Overview 3D Printing from Concrete: Concrete choreography.
That's how simple and quickly works 3D printing from concrete.
3D Printing Houses, Concrete Buildings is a prospect for construction.
Hollow concrete structures are printed for strategic use of materials, which provides a more sustainable approach to a specific architecture. In addition, the calculated material structure and surface textures are an example of versatility, and a significant aesthetic potential of 3D printing with concrete when used in large-scale structures.
A new review will be about printing on a 3D metal printer.
It is worth noting that there is a technology to exercise 3D printing with metal. It's the same perspective direction For construction, but for this, other materials are used (for example, powder), programs and other types of printers (about which we will soon tell me).
What color is your mobile phone? Is it black, red, white, gold or blue? Most likely, rear end Your phone has some kind of one-color option that you will find in a coloring set for beginners. Most phone manufacturers needed too much time to understand that the colors of the phones are really important for buyers, and only recently they began to give mobile phones not only rarely used color, but bizarre shades, such as coral and color canary.
Honor News: With new 3D-holographic colored phones from Honor, it became possible to add a little new color to life.It is not surprising that most people do not mind hide the rear panels of their phones for opaque plastic cover. In cases, the user can choose the appropriate color of the phone cover to give a mobile little personality. But the new Ityan phones of the Honor 20 Pro and Honor 20 series are the first smartphones in the world with a three-dimensional dynamic holographic design, and their reflective appearance can be a new industry standard.
"Always better" is the motto of the company. Probably, this motto says that it refuses to follow the industry standard, simply experimenting with paint layers when creating each new phone model.
Color 3D holography for body body.
In order for the body of the phone to achieve a flickering optical illusion, the Honor manufacturer has developed its Honor 20 model with a deep layer containing millions of flickering microscopic prisms, and on top of this there is a so-called curved 3D glass layer. The combination of these technologies makes the light "play and dance" on the back of the phone, when the user turns it into different directions.
Two colors for the phone Honor 20 can be found under these dynamic layers, this is a midnight black (Midnight Black) and Sapphire Blue (Sapphire Blue). Unlike the new-fashioned phrases for some telephone colors, Mobile Honor has color gradients for phones that really cause the appearance of the effect of the flickering night sky or a flickering gem.
Although the color options are encouraging, with a Chinese phone Honor 20 Pro, you can go even further. This upgraded model contains a branded "Triple 3D grid" containing three layers. Instead of just paint rear panel The phone itself, this time the layer of body color is located between an external 3D layer and the inner layer of depth. According to the manufacturer of phones, it makes the effects of color displacement much more dynamic.
Honor 20 Pro Mobile Phone is actively sold in two colors, such as Phantom Black (Phantom Black) and Phantom Blue. Although the names of these telephone coloring are not so metaphoric, do not think that their rear panels are less dynamic.
Honor obsession in choosing right colors It may seem overly dramatic, but for example, in the UK, Sota Sots of British showed that forty-nine percent of them take into account the color when choosing a phone to buy.
What is the sale of the phone with a changing color gamut?
Choosing a mobile phone, as the designer Honor Jun-Su Kim, is "extending a person's life." In essence, Honor declares that customer identity cannot be covered by one constant color.
History of creating Honor color phones.
The Honor 20 model demonstrates the natural evolution of the company experiments with dynamic color in the design of the phone. With the model Honor 8, the trend of the multi-layer rear wall type 2,5d, which creates an effect of a 3D lattice. Then the Honor 9 version turned into a phone with curved 3D-glass, the echoes of which can be found already at the Honor model 20. Well, while Last year, the Honor 10 model was equipped with an Aurora's rear glass, which reflected the colors from all sides.
What is it, the screen in the phone Honor?
Honor's design innovations are not limited to the color of the phone body. It is worth paying attention to the location of the Honor Camera 20. Instead of cropping the screen to free the chamber's "selfie". The manufacturer of the phone cut the hole with a diameter of 4.5 mm in the upper left corner of the screen, thereby leaving more on the screen space for the user needs.
Camera with artificial intelligence or AI camera in the phone.
By description, it is worth noting that on the back of the device, the Honor 20 AI camera has four lens and is located, so it would leave more space for the battery with a large amount of memory. But the most important thing is that the 48 megapixel camera is obtained, using the KIRIN 980 AI microchip to get the photographs of the DSLR level and improve photos.
Summary of the color of the phone Honor.
As a result, the descriptions of the phone, technical compatibility and advanced hardware innovations - this is what usually attracts attention to chinese phones Honor. But, in this case, the technology is almost eclipsed by the design of the body with a unique colors, which can force some users not to want to return to simple two-dimensional colors of the phone body in the future.
Continue the reasons for rumors about the output of the mobile google phone Pixel 4. A new set of information or forecasts is coming due to the emerging image (3D rendering of colored enclosures), which is supposed to relate to Google Pixel 4. Frequent cases when users who follow the theme of new products misses such images from attention. Meanwhile, for some analysts, the new picture helps to make a few assumptions not only about the color of the phone.
New, unofficial, image of Google Pixel 4 gives rise to rumors about the color versions of the mobile phone case.
Although another image of the phone itself, it seems, does not show more than what has already been discussed on the Internet earlier, the model that can be seen in the background of the photography is surprising because of the color. That mobile phone has a magenta shade, which there was not yet at the Pixel model.
In another place there were other leaks of the same Google Pixel 4 with "three phones" (options) folded in a row. There are white and black colors plus the third has a bluish shade that some is called mint-green. Would you like to buy a phone blue color? Probably the name of the colors of the phone will still be updated.
Whatever leak on the colors of the phone is neither true or false, it is safe to assume that this year new Google Pixel 4 will definitely have an additional color. More interesting, in the image, physical buttons on the side of the phones contrast with the color of the case. You can see white, blue and yellow buttons that give the phone a funny look.
For some strange reason, all images and leaks noticed so far, only the rear panel displays. smartphone Google PIXEL 4. As reported in different sources, allegedly google Company Shared a rendering of the phone, and there, too, was part where the square protrusion appeared. A double chamber block was visible.
Table leakage discussed, including the image along with covers, show the rear panel of different colors and a module with a camera. And what do you think, what better color of the phone?
Pro specifications Google Pixel 4:
Obviously, the idea of \u200b\u200bthe fingerprint scanner does not leave fans alone. Some want the phone to have either the person identifier to unlock the phone, or the fingerprint scanner on the display, or both and the other together.
Some other aspects and specifications, such as phone sizes and a total thickness above 8.2 millimeters compared to 7.9 mm, which can be seen in Google Pixel 3 and Pixel 3 XL, can be taken as close to reality.
There is an assumption that the versions of the phone Google Pixel 4 and Pixel 4 XL may more like the option " Apple iPhone. 11 ", which is planned to be released in a couple of months, in the fall. When, more precisely? Google's technological company has not yet announced the official date of release Pixel 4, but different sources hint at the release of a new phone at the end of October.
Soon, we will tell about this in more detail, so follow the news about new smartphones from Google.
The robot has established a world record for collecting Rubik Cube. This robot was developed by students of the Massachusetts Institute of Technology (MIT) by Jared Di Carlo and Ben Kray, in a student laboratory. For comparison, the fastest human record holds Australian Felix Zemdegs, who in 2018 gathered Rubik's cube in just 4.22 seconds. By the way, the rubble cube of the original size has 43 quintillion possible combinations for one solution. Video with robot record holder See below.
News Robotics: Mit Quick Robot Collects Rubik's Cube, stacked in the world time record - 0.38 seconds.In the hearts of many people there is a special place for Rubik's cube. This is a good workout for intelligence. Many loved or love to play with this brilliant toy until now, and for many years there have been many contests, tests and variations for solving a rubik cube.
The popularity of Rubik's cube can be explained by the simplicity of its design in combination with the stunning complexity of the puzzle.
New Rubik 3x3x3 cube assembly record.
Engineers and Intusiars used robots to assemble Rubik cubes. Previously, 10 seconds were considered a rapid assembly, and in today's digital standards - this time is a smile.
The new record was only a question of time when engineers and robotics began to solve the task of creating a new robot. Back in 2016, the robot has established a new record on the rubik's cube assembly for 0.637 seconds. But for some enthusiasts, this time was not fast enough.
Most recently, two students of the Massachusetts Institute of Technology, Jared di Carlo (third-year student of electrical engineering and computer science) and Ben Katz (graduate student of mechanical engineering), thought that they could collect more simply robot, which could solve a puzzle with a three-dimensional combination.
They viewed the video of previous robots, and noticed that robot engines were not the fastest, which could be used to solve the problem. So they thought that they would be able to achieve greater success with improved engines and controls.
How collects robot cube rubik
Students installed the engine driven by each line of a ruby \u200b\u200bcube controlled by electronics. Using a pair of webcams directed to the cube, special software determines the initial state of each side of the cube (which colors on which face of the cube in this moment time). Then, based on the received information, using the already existing software for assembling the Rubik cube, with the help of the algorithm, the robot decides the puzzle.
What is the result of the work? Their robot collected Rubik's cube for 0.38 seconds! It is safe to say that no person is physically able to beat the record of this speed. You can add another achievement to the list of robots, superior to people.
There is a person who has the fastest world record for manual assembly, his name Felix Zemdegs. He was able to collect Rubik's cube for 4.22 seconds. The skills and talents that displacing robots are extensive and diverse, if not more. Not to mention that robots can still amaze. Next video demonstration of the robot.
Video Rubic Cube Assembly Review for 0.38 seconds:
So, hardware hackers, Ben Katz fit with Jared di Carlo, broke the previous record for robotic rubble cube collection. Their robot decided a puzzle 40 percent faster than in the previous record.
Details about the robot record holder
Robotic device is collected from the Kollmorgen Servodisc U9 series engines, PlayStation Eye cameras (for cube scanning) and of course needed a Rubik Cube. According to the creators of the robot, - "the entire software process takes about 45 milliseconds. Most of the time is spent on the waiting for the webcam driver and defining colors on the sides of the Rubik cube."
Research Group on Artificial Intelligence Facebook Inc. Presented new platform For robotics entitled Pyrobot. This platform (framework) is developed in conjunction with researchers from the University of Carnegie Mellon. Pyrobot is designed to help researchers and students in the field of artificial intelligence integrate deep learning models, created using the Pytorch platform (this is a machine learning library for Python programming language), with robots that they create. The basic idea is that they can easier create their robots using artificial intelligence skills, such as natural language processing.
News from the world of robots C II (AI): Facebook presents a platform for Pyrobot robotics - this open source framework for robot management.Facebook has stated that he wants to promote long-term robotics research to help develop embedded artificial intelligence systems that can learn more efficiently due to interaction with the physical world.
Earlier to stimulate the production of artificial intelligence models, the company introduced Pytorch Hub.
What is pyrobot today
Pyrobot is a lightweight, high-level interface that provides independent from hardware API interfaces for robotic manipulations and navigation. Pyrobot repository also contains a low-level stack for Locobot, an inexpensive hardware platform of mobile manipulators (tools for robots assembling). Now artificial intelligence and machine learning becomes more affordable for beginners in robotics.
The scientific leader of the Arnage of Gupta and Saurhh Gupta as a researcher Facebook, explained in his blog that: Pyrobot is a lightweight high-level interface over the operating system of the robot. It provides a consistent set of hardware-independent medium-level API (application programming interfaces) to control various robots. Pyrobot abstracts from details about controllers low level and interprocess interaction, therefore specialists in machine learning And others may simply focus on creating high-level applications for robotics C II (artistic intelligence).
The Facebook source also reports that Pyrobot has dozens of potential applications, for example, helps researchers exchange data and set reference points and rely on each other. The company requested suggestions from the wider research community AI on how to democratize robotics using Locobot and Pyrobot, which are the specifications of hardware, and tools for creating low-cost robots.
Pyrobot works using API to abstract functions that robots must use. Tasks, such as kinematics, trajectory planning, position management, speed and torque for compounds, as well as visual simultaneous location and mapping. Pyrobot comes with a number of pre-trained deep learning models that allow robots to navigate, capture objects and so on.
This means that developers can program their robots using only a few rows of Python code, "Facebook reports.
More researchers from Facebook say that: the cost of hardware and the complexity of specialized software limit the scope of research in the field of robotics. Having lower entry barriers, researchers can, for example, create several robots that collect data and learn in parallel. Providing general platform For various equipment. Pyrobot will lead to the development of tests in robotics, similar to other areas in AI and quantitatively determined the rate of progress of robotics with artificial intelligence.
Like the Robomaker tool from Amazon, Pyrobot works as an interface over the robot operating system (ROS), expanding the infrastructure. In May, Microsoft technological company has released a set of tools for robotics with limited preview, and last year integrated the ROS platform in Windows 10.
The famous analyst and the author of Apple Smartphones, Ming Chi Kuo (Ming-Chi Kuo) may certainly be the most reliable source of leaks and information about apple products. And today he released a new research report received by Mac Rumors, where he mentions the future of the iPhone and when we can expect that Apple will finally switch to smartphones with 5G support (fifth generation mobile communication).
Rumors and technology news: Ming Chi Kuo analyst predicts that Apple will release 5G iPhone in 2020When Apple also planned to use Intel modems in their iPhone, rumored that the phone 2020 phone model will be the first to receive 5G communication. However, since then, the "apple" company switched from its modem supplier at Qualcomm. For what they had to settle a long patent dispute with an American microcircuit manufacturer, pay at least 4.5 billion dollars and not to use Intel modems. Perhaps Intel even closed its 5G development plans after this news.
According to the note analytics Kuo Ming Chi, development new version The mobile phone iPhone 5G goes exactly according to the schedule. Allegedly we will see that Apple will announce the release of iPhone 5G in 2020. Also in the CU note, it is mentioned that both the 5.4-inch iPhone model and the 6.7-inch iPhone model will have a 5G modem. Given a hint of some update iPhone XS and iPhone XS MAX smartphones.
Ming Chi Kuo also said that all three iPhone models in 2020 will be presented in several colors and are equipped with an OLED screen, unlike the LCD screen (LCD) in the current iPhone XR. However, this year, probably, we still get an iPhone XR update with an LCD display, so if the OLED screen in the mobile phone has too much importance for you, you may wait for the year.
5G iPhone competitors:
Currently our best competitors for Android system The following 5G phones are:
1) Xiaomi Mi Mix 3 5G (128 GB of Memory, 6 GB RAM and Battery with Fast Charging);
2) OPPO RENO 5G (innovative design, affordable price, powerful camera);
3) LG V50 THINQ (screen 1440 for 3120 pixels, memory expansion up to 1 TB, 4000 mAh battery);
4) OnePlus 7 Pro 5G (Examless AMOLED-screen has no recesses and holes);
5) ZTE Axon 10 PRO 5G (Camera 48 megapixels, Snapdragon 855 chip).
Global sales of 5G phones.
World delivery to mobile stores with 5G technology support (this is fast mobile connection The fifth generation) may be higher than the expectations of market analysts. It is worth noting that some mobile market browsers believe that such supplies are likely to achieve 150 - 200 million units or more than a dozen percent of the world's 5G phones next year.
After a set of rumors in the news of the cryptocurrency market. On Tuesday, Facebook's plans are published for the next year, among which are the ambitious release of a new digital currency called Libra (or librage). It will be managed by the Association consisting of corporate investors. Partners are the payment companies Visa, Mercado Pago, Paypal, MasterCard and Stripe. The project is joined by the technological companies Uber, Ebay, Spotify and Lyft. European telecommunication companies Vodafone and Iliad also participate in the new project. Investors Union Square Ventures and Andreessen Horowitz, plus academic, non-profit facilities Womens World Banking and Kiva.
Facebook introduced a new Calibra project, a digital wallet for storing and sending "Cryptomet" Libra.It is expected that through its mobile applications billions of people will be able to make payments with the help of cryptocurrencies from the social media giant Facebook. Facebook's social network plans to officially launch a new Libra cryptocurrency project in 2020. Libra is a new type of digital money that are intended for billions of people who use mobile applications and social network.
In popular social network Facebook has more news for the world cryptocurrency.
That a new digital wallet would be created, which will allow users of the Facebook application to store and exchange cryptocurrency. Facebook creates a new subsidiary of Calibra.
Why does Facebook bet on cryptocurrency called Libra? Perhaps the highest goal of the latest development, go beyond social networks.
Digital wallets for storing, sending and spending cryptocurrency Libra will be connected to messaging platforms.
Initially, the cryptocurrency will be available in the Facebook Messenger / WhatsApp, and of course in separate iOS, or Android applications.
The Facebook press release says that: "Initially, Calibra will make it easy and instantly sent at a low price Libra - almost anyone who has a smartphone."
It is also reported that: "Over time, additional services will be offered for enterprises and people. For example, buying a cup of coffee with scanning code, payment of the account by pressing the button, a public transport trip without the need to take cash with you."
Facebook cryptocurrency wallet safety.
To increase the security of new cryptocurrencies, it will use similar functions of checking and protection against fraud, which are already used credit cards, banks. The Facebook cryptocurrency service will have user support. And in case of gaining access to account The user has someone else, promises compensation for lost assets.
Cryptocurrency coins will be stored by users in a digital wallet. But, the world of cryptocurrencies is not always stable! Time will show whether to help people their own digital money Facebook save, sending and spending them with the same simplicity as text messages are sent.
Cryptovaya will manage the founding members: Facebook, more than two dozen different organizations and a separate Swiss Foundation.
Why Libra?
What does this mean the word Libra?
Former head of PayPal, David Marcus, who heads the Facebook project, said about the following: "The choice of named after Libra (scales) was inspired by several reasons, namely the French word freedom, Roman weight measurement, an astrological sign of justice."
What would you like to know Facebook Libra cryptocurrency?
Technology and Design News: Madly Beautiful IPhone 11 Concept with Innovative, Color, curved screen.Apple technological giant will release iPhone 11 in the near September. If all sorts of rumors are truth, the multimedia phone can have the same design as the last two generations of the phone. Regarding the final design of the iPhone 11, we are ready to accept, the fact that designers from Apple will be offered. But, we cannot stop imagining what could be if the technologies were allowed to create any iPhone design 11. And this is exactly what very talented designers do. This time created a beautiful concept of iPhone 11, which throws off all the buttons in favor of an immeless curved phone screen.
From the implementation of such a design, the iPhone is obtained with a beautiful glowing band, which stretches along the entire mobile phone and replaces the physical buttons swing the volume and the power button. The use of such a philosophy in design allows you to get an iPhone with screen icons on the side.
Although it can be a nice-looking phone, there is absolutely no chance that the concept will become a reality. In addition, the protection of such a phone with the help of the cover seems impossible, since, closing the screen space, the cover takes some of its main functions. Imagine that if a similar phone accidentally fell to Earth, the cost of repair of the curved screen would be higher for the user than with the classic version of the screen.
We hope that new iPhone 11 will have a bright screen under the sun.
It is expected that three models will appear in the iPhone 11 2019 line, as last year. It may be two OLED phones and one with the LCD screen. The iPhone 11 and 11 Max models can have a type of OLED screens, as well as to have a screen size of 5.8 and 6.5 inches, respectively. Perhaps the iPhone 11R model will be equipped with an LCD display to reduce the price to a minimum.
It is also expected that new iphone version 11 and 11 MAX will have a triple camera configuration, while the iPhone 11R version expects a double chamber. In fact, it means that at all three mobile phones An additional camera may appear.
It is assumed that the front part of the iPhone 11 line will remain the same, and there will be no difference in the size of the excavation. However, the recent reports argue that there may be improved identification of a person who can authenticate the user under some acute angles.
Video IPhone 11 Concept Overview with an innovative, curved screen side:
According to the creator of this video, the new beamless iPhone 11 could have specifications:
6.4-inch full screen display;
- hidden front 13MP camera;
- Four cameras, 8K @ 120 FPS;
- New Apple operating system, iOS 13;
- Apple A13 Bionic Mobile Chip (up to eight 8 times faster than the A12 Bionic chip).
WWDC is a large-scale Apple event for developers. During this event, Apple tells developers and interested visitors about new versions of MacOS and IOS operating systems, their latest development tools, on the latest own applications, devices. Says about plans to stimulate further development, about new partnerships with developers and other details over which it works. It so develops that visiting the IT conference Apple WWDC 2019 is the perfect chance, first to know and see what new applications will be under iOS and MacOS system and not only.
One of the most important qualities that are required from good smartphone - The ability to correctly reproduce the sound when talking and listening to ringtones. It often happens that an external or internal spoken speaker, headphones are not fully functional. The operation of the microphone, headset and the call signal can be significantly improved, if you know several non-hard secrets.
Increased volume in headphones
It often happens that manufacturers reduce the sound of headphones from caring for users to protect them from spoiling hearing. If you want to circumvent this restriction, it is necessary to access the file system and its correction. You can install the terminal with Cydia or mount the phone as a computer partition.
The second option is more convenient. It is enough to put the Phone Disk and sort out the smartphone files:
- Go to Library, the Preferences tab. The com.apple.celestial.plist file is set in the AUDIO / VIDEO line. All these actions are carried out in the copy of the file on the computer, after which it is transferred to the phone instead of the old version. Editing can be done using Xcode or any similar utility.
- Then is edited by the PLIST document. There you will see the name of the regions and the sound value. For example, it can be 83%. You need to set 100% (digit 1). Then save the modified file and download the phone.
- Restart the device. After that, the smartphone must issue sound in full force.
The problem is that in new versions of ios. Installing updates is accompanied by a return settings to the original parameters. So you have to regularly carry jailbreak.
Optimization of sound transmission speaker
To improve the quality of work of the iOS dynamics, follows:
- Use the standard set of settings. The right buttons are on touchscreen and device itself. The end end is equipped with a silver button. To improve the audibility of the call, click on its upper part.
- If the manipulation data did not succeed, then you will have to act without a button. On the touchscreen, open Settings and go to Sounds section. Move the runner on a special blue panel to the right.
- The above-described actions may not bring the desired result, and the user will still remain dissatisfied with the standard sound of the smartphone. Then you need to work with system system files.
- Pass the following way: "System" - "Library" - "Frameworks" - "Celestial.framework". You will need a SystemsoundMaximumMvolume document. There provides information regarding maximum sound in the entire system. By default, the parameter is 0.7. 0.99 should be set and reboot the gadget.
In addition, it is worth regularly clean the speakers with a soft, clean and dry pile. The protective cover also "eats" part of the sound, so pick up models that provide its maximum passage.
The situation when the owner of the "apple" device observes poor audibility of the voice of the interlocutor when calling is a fairly common problem. At the same time, if you put a call to a loud communication mode, the voice appears. As the experience of many users shows, such a problem is most often characteristic of the gadgets of the sixth version. Specialists of repair shops note that in iPhones 6, as well as iPhone 5, 5S and other models of phones from the epple sound disappears very often, which is the cause of the appeal of the owners of these gadgets for repair.
If such a problem is like a badly audible interlocutor on an iPhone 6 or iPhone 5, you have, read this article. It contains the most common causes of this malfunction and ways to eliminate it.
To summarize the experience of repair masters, it can be concluded that when the interlocutor is poorly audible in the iPhone 6, the reason for this is one of these factors as:
1 breakdown of the device dynamics. Moreover, the problem may be held in both the hardware and software part of the device. Independently, the user will cope with such faults will be extremely difficult. However, it is worth named some of the ways that may be returned to the sound, and the smartphone owner will avoid contacting the workshop to repair. 2 The influence of extraneous programs and applications for sound quality. Few people think that serious violations may be caused by such a trifling cause. However, it is worth excluding it. To do this, you need to see which software you installed on the device, especially in lately. Next, you need to figure out which of the injected and installed programs Could have a negative impact on audio settings iPhone. If such are found, the further action plan is very simple - you need to remove programs from the smartphone. Usually, after that, the sound functions of the device are normalized, and the sound becomes clean and beautiful, as before. 3 Finding the quiet mode lever in the "MUTE" state. At the same time, the lever is marked red. What does this situation take from the user? Nothing complex - only switch the item to another position. 4 Incorrect removal of portable columns. Due to such misunderstandings, of course, the sound can not disappear completely, but its quality will deteriorate significantly. Most often, the sound becomes quiet, like a whisper. So try not to forget whether you connected the headphones today to your device, and not after that actions arose a problem? If everything converges, the source of the problem, and, it means that its solution is successfully found. In such a situation, the plug is re-inserted into the slot, followed by their extraction. 5 damage to the upper loop either the audio connector. In this situation, as in the previous, there is no complete disappearance of sound, but it becomes barely audible. Although, if the volume of sound when talking is not very good, you should not worry and immediately think that there are serious malfunctions or breakdowns in the apparatus. You may have randomly exposed a low volume for conversations on the device. If the problem is in this, you just need to press the volume of the volume in the conversation process.First, you should turn off the phone, and then turn it on again. If the sound is still not, you will have to carry a device for diagnostics to a specialist. Remember that the faster you consult professionals, the cheaper you will cost the cost of repair.
In that situation, when the sound is not completely disappeared, but disappears only sometimes, such an action can help as the firmware update on iPhone 6.
If the button is turned on, and the iphone 5 owner is still bad or does not hear the interlocutor at all, this option is not excluded that the problem is not with its device, but in the device of which he calls.
Above the main sources of problems with sound in iPhones 5 and 6. If, after performing all actions to improve or return sound, it has not returned or its quality leaves much to be desired, it means that without serious repairs can not do. In such a situation, it is decided, as a rule, not by repair, but a complete replacement of such an important detail as a hearing speaker.
A number of tips, how to correct the situation with insufficient audibility of the interlocutor when talking on iPhone 6, gives the manufacturer himself. Below are the most effective of them. If you faced the problem of bad audibility on the "apple" device or, more worse, with a complete lack of sound, carefully look at these recommendations. Perhaps with their help you can correct the situation yourself, avoiding similar to the repair shop and excess spending.
So, Apple in the problems of the implementation of sound functions in smartphones advises:
- Try to enlarge the volume of the sound. This is done elementary - using the audio volume control buttons. In the process you need to make sure that the sound level indicator appears on the display, i.e. His volume.
- Check the connection of the audio headset. If a headset is connected to the device, the sound in the dynamics of 100% on will be. To correct this state of affairs, you must perform only 2 steps:
- Clear receiver. Not for the first time during this article, we repeat that the cause of the inadequate quality of sound in the phone from the EPL can become a banal pollution of the protective grid of the receiver. The company EPPL to resolve this problem advises to do such steps as:
- Check the operability of the receiver. If you suspect that the cause of the problem is problems in the receiver, do the following:
- Reboot or update your smartphone. Often, the execution of one of these actions leads to a solution to the problem with sound on the device. To do this, restart the iPhone and reproduce the system testing. If after that the sound does not appear, you need to update operating system Before the new version.
- Check that nothing has been connected to the headphone jack.
- Go to the Gadget Settings section, select bluetooth and disable this option.
After performing the actions described above, the sound must appear again.
- To see if the receiver is blocked, which may occur due to cover with its cover or film. If the device is new, protective film From plastic on both panels - front and rear, it is necessary to remove.
- Carefully inspect the protective film, and if the contamination is visible to the naked eye, you need to wipe the element of a small brush. But it is important to remember that the brush must be absolutely dry, in order to avoid moisture from entering the device. As you know, any user of an iPhone, moisture is one of the main enemies of the device that can lead to serious breakdowns of internal details.
- Turn on the speaker during the call. If at this action the sound remains poor or it will not be, therefore, the problems in the network or with the reception of the signal. In such a situation, you can try to call another subscriber a little later or elsewhere.
- Enter the voice records program, create a brief audio file record.
- Click on the icon at the top of the display. Playing the sound between the receiver and the speaker will be switched.
- Click the appropriate button to record audio using the built-in Gadget receiver.
If after that you will hear a clear, clear high quality record, which means the problem lies in the company's network - telecom operator or in the voicemail system. And if the misunderstanding is still not permitted, it will correctly turn directly to the device manufacturer. You can do this through the official website by writing to the support service.
If none of the methods given above, both from specialists and from the company EPPL, did not help, do not pull the time. As soon as possible, contact one of the certified repair centers or in the support of the manufacturer's "apple" gadgets.
Articles and Lifehaki.
By missed several important calls on a mobile phone, you should think about how to increase the sound on iPhone.
After all, periodically, the volume can be reduced by various reasons, as a result of which the subscriber does not know about calls and messages coming.
Full ways adjustment
Increase the volume on the mobile phone can be in several ways. The most common is to click on the buttons located on the end of the gadget. The top button is responsible for increasing the volume, lower - for the decrease.If this method did not bring the desired result, then it can use another:
- Go to settings, open the "Sounds" section.
- To increase the volume of the volume, the slider should be translated to the right side until the end.
Then to find the SystemSoundMaximumMvolume document, which stores the maximum volume settings of the entire device.
The set parameter will be 0.7, increase it to 0.99, make a reboot of the gadget. After that, the mobile phone will start to sound louder.
What to do in case of breakdown
If a mobile phone is normal, then no difficulties with sound adjustment occur. But when the gadget is broken, problems may appear.
In this case, to enhance the sound, you can use the following instruction:
- Make the device shutdown and turn on. Thus, there will be a reset of sound settings.
- Disconnect the headset from the mobile phone, since when the call is received, the sound will go through headphones, not a speaker.
- Make a reset of all settings. Before this you need to create backup To save data from a mobile phone.
- If the side buttons were injured when the mobile phone falls, it may cause a worsening of sound. The buttons could hang, as a result of which the sound will decrease, then increase.
In such a case, the elimination of the problem is possible only through a specialist.
Apple devices have always been distinguished by a balanced sound that is suitable for reproducing the overwhelming number of musical genres. Nevertheless, it suits not all users.
If you enter the number of those who want to improve the sound of music on the iPhone, these tips are specifically for you. We collected together the most simple recommendations to improve the quality of playback that will help you get more pleasure from music.
👍 For advice, thanks to the guys from Re: Store.
1. Set up playback in "music"
In the Settings menu\u003e "Music"\u003e "Playback" you can work with three items:
"Equalizer" - You can experiment with this item, depending on the equipment you use with the iPhone:
- "More low" perfectly suitable if you are using Airpods.
- "Late night" will increase the playback volume through the speakers.
- "Toncompensation" levels the sound along the "equal volume" curve, and it improves it on a low volume.
"Volume restriction" If you should use if the source that you most often uses, does not cope with playback at the maximum. Otherwise, disconnect.
"Volume Correction" Aligns the level of the current composition with respect to the previous one. To each composition playing more emotionally, it is better to disable this setting.
2. Select High Quality Apple Music
By default, in the Settings menu\u003e "Music"\u003e "Cell data" item " High quality"Disabled. This makes it possible to listen to music from Apple Music. even in the conditions of unstable mobile Internet and spend the minimum number of traffic.
Nevertheless, if we are talking about improving sound quality, then all users of Apple Music need to try to include the "high quality".
Even less stable 3G is already enough To play tracks from the Stregnation Service, LTE in general with your head. But the traffic in this case will fly away almost 3-4 times faster, so it's better to think about the careless.
3. Listen to the "uncompressed" audio. Yes, so you can
In 2018, users are still divided into two types: the first souls do not break in the cutting services following Apple Music, but the second continue to play for audio recordings without compression.
If you think about improving sound quality with the iPhone and you do not critically use exactly Apple Music, try the Flacbox application (free + purchases).
With this program you can open almost any music file. On your iPhone. To do this, it does not even need to download - you can use cloud storageconnected to Wi-Fi computer and Flash drives PowerDrive.
Use FLAC format filesTo get the maximum playback quality. Some argue that today the difference between compressed and uncompressed music is almost impossible to hear, but this is not so.
4. Set the equalizer under the headphones
Many third-party applications (The same FlacBox) will open your access not to simple, but to a multi-band equalizer on 10 "tracks" with a preamplifier and a whole fan of pre-prepared settings for presets.
It will help you customize the sound according to the personal sense of the beautiful: squeeze out Self headnikov or the speaker iPhone. maximum.
It is a pity that Flacbox and similar applications cannot access Apple Mushes.
5. Firm the records in the music set
If we are not talking about personal listening to musical compositions, but about group, in this case, it is not easy to go to first place qualitative soundand reproduction that is not interrupted by pauses.
When the next time you bring friends and arrange a party, be sure to try applications, mixing selected songs without pauses.
The most famous from such programs - Djay Pro for iPhone (749 rubles). Free analog - Pacemaker Music.
It is enough just to form a playlist from your favorite records, connect the iPhone to the Pogromic speakers and turn on AUTOMICS.
Such applications are especially relevant for holidays, and before the new year they need to learn to use 100%.