Q3 Main V 1.4 firmware. SAMSUNG N8000 Chinese Tablet Firmware. Program for flashing

Hard reset did not help (reset to the factory settings), I first encountered such a problem, so the first decision was, to seek help from connoisseurs. I took it into one miracle workshop, where he knew almost half a year .. Could they find the firmware in any way .. my patience came to my end, I took it. On the way home got another pros. During the day they promised to do. In the evening, come to pick up - it turns out not flashed. Totzy answer - can't find the firmware. They returned in the same condition that I gave them.

Well, he was not, I thought, and I decided to make my contribution to the repair of this unit, it would not be worse. Step up at home on the forums, reading, how and what they sew these devices, I realized the most important thing to guess the firmware version. NOTE Samsung Galaxy Nout-fakes The network turned out to be a lot of options for firmware. Well, I started to download them and try.

The most popular firmware for this device was this: Maple_mx913_dc_jelly_bean_4.1os_root_firmware_d20130601_up. and Maple_mx913_dc_jelly_bean_4.2_os_root_firmware_j20131101 But they have completely absent support for the touchscreen. That is, everything is beautiful, although in Chinese, but you will not take a finger on the screen, only from the keyboard you can control the tablet, which turned out very not convenient. Began to look for other options. Online 4pda.and other, similar sites, I found a lot of useful. And Tripovav 100500 Firmware, never found the one that would work with the tablet normally. Some worked with Tachskrin, but he had a dead zone with a centimeter from below, others had a calibration of clicking on the screen, that is, on a centimeter, it was necessary to poke a finger on the centimeter, thirdly there was no motion sensor or an accelerator, which were on Mexican or completely on Arabic languages \u200b\u200band so on. In general, I'm tired of looking for a cat in a bag and I remembered that when I disassembled this tablet, I made some pictures of his internships, and decided to look at them. What a miracle processor was there

All Winner A13 I remembered, and this did not give me anything, but what was there for the inscriptions were ... After reviewing the pictures, I found this cherished inscription on one of the boards of the Unnamed Tablet: "FOR-FUN Q3 MAIN V1.4".

Well, now at least some kind of hook. Going to the software repository on Male Ru through all the same wonderful website w3bsit3-dns.com, I found several firmware for "FOR-FUN Q3 MAIN V1.4". Well, it remained for small. By downloading the one that weighed more, 624 meters, I poured it into my tablet, I was looking forward to His reboot, and was upset, the tablet was dependent on all the same inscriptions "AndRid", with the second attempt I was lucky, downloading this "Zet6223wtarom" in it In 446 megabytes, firmware, I got 100% result! The tablet earned. Everything, absolutely everything worked. Download speed, screen, touchscreen and wifi - everything worked perfectly. I didn't even assume how many cool applications were added to this China! The firmware turned out to be collected on Android 4.0.4, which I also pleased, Ie, the cheesenee is fresh.

Well, now in order, how and what I did it.

What we need: a computer with operating system Widows XP or Windows 7 32 bit, Phoenix Suit, a cord for connecting the tablet, firmware and tablet itself.

First you need to do preliminary training - Setting the tablet driver, both on and in the firmware mode.
For this we do the following:

1) on the computer put the program Phoenix Suit (download)

2) We connect the included tablet, hear the sound of the connected device, in the equipment we see the Android device

click on it right-click we ship, choose - Refresh Driver

In the next window, choose what is shown in the figure below.

Click what is shown below:

click Next:

then "Installation from the disk":

then click on to nopka "Review" and specify the path to the folder with the installed programma Phoenix Suit \\ Drivers \\ AW_DRIVER

And click "Open", select USBDRV from the AW_DRIVER folder, press again on "Open"

and then on "OK"

The next window with the driver that must be installed, not paying for the warning that he does not have digital signature Click "Next"

it will be installed equipment and a message that everything is ready.

All the same, the actions must be made with the tablet in the update mode (this is when it is turned off, clamp the "Volume +" button, keep it and connect it through the cord to the PC, the red indicator lights up on the tablet, but the screen does not shine, but the screen will be definitely as an unknown , Make the same actions described above). Otherwise, the Phoenix Suit program will not see the tablet and will not be able to flash it.

Run it, and do not forget to make sure that there were no errors during the installation, the Goodle driver was installed

2) Swing this firmware (download) or another.

Now actually firmware:
We launch the Phoenix Suit program, click on the "Anchor" icon, select the firmware, connect the cord to the computer via USB, then on the plate you climb the "Volume +" button, keep it, connect the cord to the tablet and quickly press (not releasing the "Volume +" "Button Back", the firmware will start automatically after the device is detected.

Well, he was not, I thought, and I decided to make my contribution to the repair of this unit, it would not be worse. Step up at home on the forums, reading, how and what they sew these devices, I realized the most important thing to guess the firmware version. To similar Samsung Galaxy Nout-fakes in the network turned out to be a lot of options for firmware. Well, I started to download them and try.

Well, now in order, how and what I did it.

What we need: a computer with operating system Widows XP or Windows 7 32 bit, Phoenix Suit, a cord for connecting the tablet, firmware and tablet itself.

First, it is necessary to preliminarily prepare - setting the tablet driver, both enabled and firmware mode.
For this we do the following:

1) on the computer put the program Phoenix Suit (download)

2) We connect the included tablet, hear the sound of the connected device, in the equipment we see the Android device

we click on it right-click we ship, choose - Refresh Driver

In the next window, choose what is shown in the figure below.

Click what is shown below:

click Next:

then "Installation from the disk":

then click on to nopka "Review" and specify the path to the folder with the installed programma Phoenix Suit \\ Drivers \\ AW_DRIVER

And click "Open", select USBDRV from the AW_DRIVER folder, press again on "Open"

and then on "OK"

The following window appears with the driver that must be installed, not paying for a warning that it does not have a digital signature press "Next"

it will be installed equipment and a message that everything is ready.

Run it, and do not forget to make sure that there were no errors during the installation, the Goodle driver was installed

2) Swing this firmware (download) or another.

Deciding to acquire a tablet computer, a person faces an incredible abundance of these devices from both famous manufacturers and little-known firms. Moreover, the situation is not discharged when it is necessary to choose not by hardware characteristics, but by the name of the company and the cost, since only it distinguishes the model. Without the reason for the collectors from the Middle Kingdom, literally flooded the market with almost identical plates. It is not surprising that one of the questions that can arise with a happy owner of such a portable computer: "How to flash the Chinese tablet" Android "?"

Why make replace software

Owners of tablets from famous manufacturers of problems with the work of gadgets, as a rule, almost does not happen. Everything functions exactly as conceived. However, unfortunately, with inexpensive chinese models So it turns out not always. Very often there is a situation where the user of such a tablet lasts some time notes that spontaneous redirects (forwarding) for unwanted resources occur in any browser, although the antivirus programs do not detect anything.

Replacing the operating system files can also be needed in case incorrect work any software and hardware components. In fact, the causes can be the most different.

Selection of firmware

In order to replace control programs, you should carefully familiarize yourself with existing information online. Typically, the owners create multi-page branches of specialized forums for each device where problems and solutions are discussed. It is there, in particular, you can find the instruction, how to flash Chinese tablets, as well as the firmware itself. We recommend reading everything carefully.

The firmware is a set of files that are written on internal drive Gadget and form an operating system. Inside it, among other things, there are drivers that control hardware components. In the case of an erroneous selection and boot process, the gadget can stop turning on, becoming the so-called "brick". Firmware for Chinese tablets are chosen not only by name, but also on revision. Let us give an example. Take the 3450DUO model. There are modifications B and W, which differ in the display by the display. After downloading in 3450DUO / B, the operating system for W, the user will receive a dark screen. Next, we will consider solutions on MTK processors.

Program for flashing

In order to "sew" the operating system in the tablet, it is necessary, except for the firmware itself, download the program Flash Tool. Often the proven version comes with the firmware files.

Firmware for Chinese tablets work better with the latest versions of Flash Tool. So, it has proven itself 5.1352. It is completely free, and there are no problems with availability.

How to flash Chinese tablets. Preparation

Before proceeding with the update procedure, you must make sure that the gadget battery is fully charged. You also need a computer running Windows (less questions), free USB port and the corresponding cable. It is recommended to use laptops or PCs with a backup power system, since the interruption of the flashing process can lead to a violation of the structure of the internal memory.

Often the question of how to flash Chinese tablets is set due to the fact that any non-obvious error occurs at the preparation stage. So, you need to create a folder in the root directory of the "C" disk, and its name should not contain Russian letters, only English is allowed. It is important. Also no gaps.

It should unpack the firmware files (boot.img, system.img). The tablet needs to be disconnected, but do not connect to the computer.

"Filling" systems

The next step is required to run the Flash_tool.exe program. In the download agent window you need to specify mtk_allinone_da.bin from the application-firmware application directory. In the below you want to select Markup file - the so-called scatter. This is a key point. Each who is wondering how to flash Chinese tablets should have at least general ideas about this. Depending on the processor modification, the file mentioned may have different names. So, for modern mass models, it is called MT6582_Android_scatter.txt. To substitute this file from other devices, even with the same processor, it is impossible. Over rare exceptions. Otherwise, it will have to be studied not only how to flash Chinese tablets, but also how to restore them from the "brick" state.

If everything is done correctly, a list of detected files will appear in the main window (Preloader, MBR ...). Here, a little higher, you can select flashing mode. It can be Firmware Upgrade, download only or Format +. The least destructive second. Most often it should be used. Regardless of the correctness of the preparation, we recommend always removing a tick from the Preloader block.

When it is all completed, you need to click the download button. The program will go into standby mode. You need to attach the tablet to the computer and monitor the boot process. If everything has passed successfully, the program window can be closed, turn off the tablet from the computer and turn it on. After the fill operation of the software, the initial load takes a long time, up to several minutes.

Important moments

Studying how to flash Chinese or any other, you should remember that:

When pouring a program from a laptop that runs from the battery, a situation is possible at which USB ports are disconnected due to a decrease in charge in the battery below the critical level.
Sometimes the UBoot block is not flashed, and the tablet does not start. The problem lies in the fact that the path to uboot.img is registered in the scatter file, and there is a LK.BIN in the list, which is also renamed.

Some models tablet computers And smartphones refuse to flash due to the features of connecting to a computer. In this case, immediately after joining the USB port, you need to press and hold the POWER button along with the volume up.
To avoid failures, it is recommended not to connect the gadget to the ports on the front panel of the personal computer.

Fake

Unfortunately, not all mobile devices with a mark "Made in China" can boast high quality and stable work. Very often, the owners of gadgets ask how to flash the Chinese tablet N8000. Well, if someone had this copy of the model from "Samsunga" in his arms, then you can only sympathize. Of course, no 64 GB of integrated memory and 2 GB of RAM does not matter. This fake at best has "aboard" modest 512 MB of cells for the operation of programs and 1.5 GB in the built-in storage. And, which is very sad, often ceases to work a few months later, even with careful use.

Yet the solution is! Below we will tell how to flash the SAMSUNG Galaxy N8000 tablet. The method, of course, is not a panacea, since inside the branded housing there may be absolutely any "filling". Therefore, what works in one case, in another it turns out to be completely useless.

Defining hardware configuration

The tablet needs to be carefully opened. On the motherboard there is always a designation, for example, MAPAN MX913 DC. It must be detected and remember (write). You should also determine the type of touchscreen controller, audio chip and processor. Under these components you need to start looking for firmware. For example, touchscreen can be GSL3680, wireless module - RTL8188ETV from REALTEK, but the processor is the common Allwinner A13.

Note that all of the above for MTK in this case will not fit. Let's figure out how to flash the Chinese Samsung (tablet).

Enliven the eminent fake

You need to download the PhoenuxusBPRO program. It is both Chinese and the English interface. First, in the Application menu, you need to select the desired image - firmware and open it with the Open command. The tablet is disabled from the computer. When you press the Start button, the color of the pictogram will become green. On the tablet, clamp a Volume +, holding, connect to the USB port, press the POWER button. The "Fill" process will begin. When a successful end message appears, the cable can be disconnected. That's all - the tablet can be checked.

Tablets so firmly entered daily life a modern man that has long ceased to be something that automatically picks their owner to the elite, as it was in time first iPad.. Now you can see the tablet as in the hands of a serious business person who comes out of an expensive car near the business center, and in the hands of a schoolboy in a subway or bus. Of course, most often it will be devices of different class. If a businessman prefers an option to be more expensive from the famous manufacturer, then a schoolboy is most likely to have a budget model from China, namely, they most often cause the question of how to flash?

Many owners of Chinese tablets face the need to firmware their gadgets

Why is this happening? Because budget devices are on both budgetary, that in their production are not the most advanced technologies both in terms of materials and part software. As a result, after a while after the start of operation, the device begins to slow down, some applications refuse to start, a variety of errors appear. It is clear that in this case it's not about the pleasure of using a gadget. Here and can help flashing.

For starters, let's decide with some starting parameters.

The budget Chinese tablet is. With the latter, everything is relatively simple - it is enough to drive in the search engine a phrase of the "flashing model_Balate"And you will get a manual, the essence of which will be reduced to the fact that you need to download the archive with the firmware, then either throw it into the root of the device file system (as an option, SD card) and restart, or connect the gadget to the computer, and then run the downloaded file . Everything else will occur in automatic mode.

Android devices

With tablets on android, everything is more complicated. Let's start with the fact that most users under the firmware imply update system software, that is, the most "green robot". This is done in two accounts, if the manufacturer of your device takes care of software support for its product, since due to high market fragmentation, Google is not able to release updates under all available models, providing each vendor to independently engage in the optimization of fresh versions under its line.

Software Update

So, it happens very simple:

We go to the "settings", there are looking for the item "On Device" (usually it is at the very bottom), and in it, select "Update by".
The system is looking for updates (it should be engaged, connecting to Wi-Fi, and not on the mobile Internet) and if it finds, it offers them to install.
We check whether the gadget is charged, is there a backup of important data and agree.
After the update is downloaded, the device will restart and installation will begin.
We'll have to answer a couple of questions (select a language, enter the data of your google account).
PROFIT! You have an updated version of Android!

And what if the manufacturer did not take care of software support and adapting the fresh version operating system? Such among Chinese tablets is common and nearby. In this case, it makes sense or simply flash the official version of the firmware (in fact, "reset" the device), which can also help get rid of "glitches", or to draw your gaze to the profile forums, where there will be so-called "custom", that is, Modified firmware.

Refracting

With officials, everything is more or less clear - we go to the manufacturer's website, with sin in half with the help of the online translator, are presented through the Chinese characters, we find a file with the firmware, read the attached Readme (most often they are in English) and do everything according to the instructions. Either, again, we are looking for all this information on profile forums, as a rule, for popular models there are related topics with and archives of firmware.

The castener firmware will force the owner of the gadget to sweat a little. The fact is that for installation modified version Firmware, you need a custom Recovery Menu, with the installation of which will have to face the user who wants to see the unofficial firmware on its device. We will not lead here in installing the recovery, as due to the variety of devices, there are many options as the menu itself and the installation methods. This is the information that you should look for specifically under your gadget model.

But after you have acquired Recovery Custom, becomes more or less universal and simple enough. Of course, do not forget that the gadget must be charged, and important data is stored in a reliable place.

So, a brief instruction:

Swing a zip archive with firmware.
Put it in the root of the memory card or file System Tablet.
Restart the device in Recovery (when you turn on, you need to press the power keys and increasing the volume, in some models the combination is different, in this case - Google).
Select the "Install Zip from Sdcard" item, then "Choose Zip from Sdcard", where we will be given to choose a archive with the firmware (there is a touchscreen in some recovery, in some Move the menu items occurs with the volume keys, and confirmation - POWER button).
We are waiting for the end of the process, then it is recommended to make a refund to factory settings using the Wipe Data / Factory Reset item.
Restart the gadget, answer standard questions when you first start (language, date / time, account, etc.).
Enjoy the work of the freshly shrine device.

Two more nuances should be known:

There are no firmware in some firmware standard applications From Google, including Google Play. In this case, you need to download the archive of gapps.zip and install it immediately after the firmware in the same way, even before the first reboot.
Some tablet models require superuser rights, so they download the SuperSU.Zip archive and install it before flashing, again, through the recovery.

Now you know what to do if your Chinese electronic friend "saddled" or you just wanted to experiment. Well, do not forget that if you are not sure about your abilities, it is better to attribute the device to a specialized workshop and to give into the hands of masters who will do everything for you. Of course, it will cost any money, but someone can save nerves. Successful to you firmware and stay with us - we have an interesting and fun!

How to flash chinese android smartphones or tablet. The Chinese Android smartphone firmware is real art and beginners sometimes introduces into a stupor, this instruction will help you understand the foundations and successfully update!

This manual is written for smartphones based on MTK chips (MTK6589, MTK6577, MTK6575, MTK6572) of MediaTek - OPPO, Zoppo, Star, Thl, Tcl, Huawei, Lenovo and others. If you decide to flash your Chinese Android, then be extremely attentive, read the instructions several times, if you do not understand it, then it is better to postpone this idea for the future!

Required tools and other firmware requirements

3. Download the firmware

4. Charge your smartphone at least 60% of the total charge

Chinese android smartphone firmware

Installation Firmware Part 1

1. Unpack the root of the disk with: SP Flash Tool program

2. Unpack the root of the disk with: firmware for smartphone

3. Run the SP Flash Tool by clicking on Flash_Tool.exe.

4. In the program, click the button, go to the folder with the unpacked firmware into the subfolder target_bin (or just in the firmware) and choose the XXXXXXX file _Android_scatter_emmc.txt (where xxxxxxx is your MTK number, such as MTK6577). The program is not closed moving to the installation of drivers

Installing Driver (Alternative)

5. Unzip the folder with drivers

6. Open Device Manager on PC

2. Turn off the Chinese smartphone or tablet

3. Remove the battery and insert

4. Now quickly connect the smartphone to the PC and install the drivers (on everything about all 5 seconds)
On an unidentified device (yellow icon), click the Update Driver button and specify the unpacked drivers folder, or rather the MT65xx Preloader, if any warnings are displayed, continue the installation. If the drivers have not been installed, repeat items 3 and 4. If installed go backwards.

Installation Firmware Part 2

5. Go back to the SP Flash Tool program

6. Press the Firmware button -\u003e Upgrade and wait until the firmware is installed.

When the tablet is turned on, after the Samsung screensaver, an android sign appears on a green background and nothing happens or the other way around - first the Android icon, and behind him "Eternal" Samsung.

We enter the firmware mode

For the N8000 firmware you need to use the LiveSuit program. The sequence of actions is as follows:

Turn off the device. If enabled - press the power button and hold about 10 seconds;
Run LiveSuit and specify it the desired file. Firmware - Select Image button. Wait until the file is processed;
Press the "Sound +" tablet and keep the button Connect to the USB connector;
A window appears with the following offer: "Press YES if you want the firmware to have a memory formatting. Press NO if you need to update the firmware without formatting (recommended)";
We are waiting for the process of flashing - about 3 minutes. The device will automatically reboot.
Select Russian language in the settings. The default is commonly installed English.

Programs required for firmware

The program for firmware - LiveSuitPack 1.11.

In firmware when used Play Market."A mistake arises and you can not download anything. The fact is that in firmware old version programs. Whatever you are looking for on the Internet Download Google Play Market from our website: Download Google Play Market 8.1.29.

Tablet N8000: Motherboard ZX-913A v1.3

Tablet N8000: Motherboard for Fun Q3-MAIN-V1.4

Before flashing, please pay attention to the complete coincidence of your device you have and the characteristics we specified!