SI BI Radio Station Vector VT 27 Smart. About Version Turbo.

For the first time in the radio station Vector VT-27 Smart / Smart Turbo implemented professional mode of operation with ProMem ® memory cells! Until now, this mode of operation has been available only for professional radio stations, now it is available for the radio stations of the CB range.

Instructions in Russian

Main technical characteristics
General
Range of overlapping frequencies 26.965 - 27.855 MHz
AM / FM Modulation View
P.L.L frequency control. synthesizer
EVVAP + Russia 900kn (450 + 450)
Working temperatures -20c to + 50c
Supply voltage 13.8 in
direct current 15%
Dimensions 105 x 102 x 24 mm
Weight 285 g (295 with microphone)

Receiver
Type SuperGetherodine with MP Control and Double Transform Frequency
PC 1st: 10.695 MHz, 2nd: 455 kHz
Sensitivity 0.5 V at 10 dB S / N (FM)
0.5 V at 10 dB S / N (AM)
Audio output 1 W
Audio distortion of less than 8% per 1 kHz
Suppression of the mirroring channel 70 dB
Suppression of the adjacent channel 60 dB
Signal / noise ratio 45 DB
Current consumption 300 mA (in standby mode)
Transmitter
Maximum RF power up to 4 (8) W at 13.8V post. Tok.
Out-of-band radiation level up to 4NW (-54 dBm)
Modulation 85% - 90% (AM) 1.8 kHz 0.2 kHz (FM)
Impedance 50 Oh.

  • Unsurpassed price / quality ratio.
  • Super compact and ultralight.
  • The cast duralumin body provides excellent heat dissipation, and, consequently, the stability and reliability of work.
  • Superior CPU with Flash memory allows Upgrade internal software (firmware).
  • Convenient switching of channels directly from the microphone.
  • Professional mode of operation with "PROMEM" memory cells
  • 10 programmable non-volatile memory cells
  • Standard (amateur) mode of operation
  • Built on a modern compact element database.
  • Different simplicity of management and reliability.
  • High functionality.
  • Automatic "spectral" customizable noise reducer
  • Manual adjustable noise picer
  • Intelligent scanning both through channels and memory cells.
  • The "Dialog" mode pauses (but does not turn off) scan, which is especially convenient when working with dispatchers.
  • Emergency channel switch button: 9, 19, 15
  • High-quality microphone
  • Powerful speaker
  • AM / FM.
  • 80 (900) channels
  • Increased range of communication - VT-27 Smart Turbo.

Opinion;
"..Name Vector VT-27 Smart is not very bad walkie!
IN general design Pleasant, body from cast aluminum, I think should not overheat even with a long chatter.
There are 2 noise - threshold and spectral.
Both have digital setting buttons with tangents.
There are two modes of power - Hi - 8 watts and LOW - 4 watts.
SMART is an 8 watt power, and smart turbo 20 (but only in the World Cup and in AM 7 watts).
The reception is worked gorgeous and pure. The transmission is quite pleasant modulation.
Pleepings in the "Russia" smart and smart turbo on the same algorithm as the vector comfort. (Up clamp, incl, selection mode --EU (EV-Ropic Frequency Mesh), RU (Russian Frequency Mesh) or 11 (Euro-Peisian + Russian frequency mesh). Fix DU and OFF. After turning on the display for a short time, the selected grid mode with EU, RU or 11 letters is displayed.

Vector VT27 Smart.
For the first time in the radio station Vector VT-27 Smart / Smart Turbo implemented professional mode of operation with ProMem ® memory cells! Until now, this mode of operation has been available only for professional radio stations, now it is available for the radio stations of the CB range.

Main technical characteristics
General switchesi
Range of overlapping frequencies 26.965 - 27.855 MHz
AM / FM Modulation View
P.L.L frequency control. synthesizer
EVVAP + Russia 900kn (450 + 450)
Working temperatures -20c to + 50c
Supply voltage 13.8 in
dC 15%
Dimensions 105 x 102 x 24 mm
Weight 285 g (295 with microphone)

Receiver
Type SuperGetherodine with MP Control and Double Transform Frequency
PC 1st: 10.695 MHz, 2nd: 455 kHz
Sensitivity 0.5 V at 10 dB S / N (FM)
0.5 V at 10 dB S / N (AM)
Audio output 1 W
Audio distortion of less than 8% per 1 kHz
Suppression of the mirroring channel 70 dB
Suppression of the adjacent channel 60 dB
Signal / noise ratio 45 DB
Current consumption 300 mA (in standby mode)
Transmitter
Maximum RF power up to 4 (8) W at 13.8V post. Tok.
Out-of-band radiation level up to 4NW (-54 dBm)
Modulation 85% - 90% (AM) 1.8 kHz 0.2 kHz (FM)
Impedance 50 Oh.

  • Unsurpassed price / quality ratio.
  • Super compact and ultralight.
  • The cast duralumin body provides excellent heat dissipation, and, consequently, the stability and reliability of work.
  • Superior CPU with Flash memory allows you to produce UPGRADE internal software (firmware).
  • Convenient switching of channels directly from the microphone.
  • Professional mode of operation with "PROMEM" memory cells
  • 10 programmable non-volatile memory cells
  • Standard (amateur) mode of operation
  • Built on a modern compact element database.
  • Different simplicity of management and reliability.
  • High functionality.
  • Automatic "spectral" customizable noise reducer
  • Manual adjustable noise picer
  • Intelligent scanning both through channels and memory cells.
  • The "Dialog" mode pauses (but does not turn off) scan, which is especially convenient when working with dispatchers.
  • Emergency channel switch button: 9, 19, 15
  • High-quality microphone
  • Powerful speaker
  • AM / FM.
  • 80 (900) channels
  • Increased range of communication - VT-27 Smart Turbo.

Opinion;
"..Name Vector VT-27 Smart is not very bad walkie!
In general, the design is pleasant, the case from cast aluminum, I think should not overheat even with a long chatter.
There are 2 noise - threshold and spectral.
Both have digital tuning buttons with tangers.
There are two modes of power - Hi - 8 watts and LOW - 4 watts.
SMART has a power of 8 watts, and the smart turbo 20 (but only in the World Cup and in AM 1 watt).
The reception is worked gorgeous and pure. The transmission is quite pleasant modulation.
Pleepings in the "Russia" smart and smart turbo on the same algorithm as the vector comfort. (Up clamp, incl, selection mode --EU (EV-Ropic Frequency Mesh), RU (Russian Frequency Mesh) or 11 (Euro-Peisian + Russian frequency mesh). Fix DU and OFF. After turning on the display for a short time, the selected grid mode with EU, RU or 11 letters is displayed.

Beginning 2015 It turned out to be successful on the emergence of radio communications, regarding the CB of the range. Most recently published vector VT-27 Smart and Vector VT-27 Smart Turbo. Pretty compact radio stations, which is preferable to most avtiteliters. There is some similarity with the MEGAJET MJ-50 brand radio station.

Megajet MJ-50 is a compact radio station with dimensions 100 * 90 * 24 cm. Connector connection headset-tangent to RG-45 radio stations. The peculiarity is not only in the sizes of the radio, but also in the possibility of turning 180 degrees, as well as 8 options for the display of the display. The radio station operates in the range of 26.065 - 28.305 MHz, 5 grids (0 and 5) The output power of MegaJet MJ-50 4 watt.


Vector VT-27 SMART In turn, it is also a compact radio station with dimensions 105 * 102 * 24 cm. One of the distinguishing features is the lack of connecting connector of the headset-tangent. On the one hand, this is a plus, since the RG-45 on the radio stations has proven itself not from the best side. On the other, it is minus, there is no possibility to increase (replace) the wire if necessary. The display is also well read, as in MJ-50, but has only one illumination - orange. The range of overlapping frequencies 26.965 - 27.855 MHz, 10 grids (0 and 5) Another distinctive feature is the presence of an automatic noise reduction function. (On the this moment It is still found at Optim Apollo V2). The output stage is collected on field transistors with a claimed capacity of 8 watts. You can also switch the power to 4 watts. A duralumin case will provide reliable heat dissipation. What the first MJ-50 batch suffered.


A distinctive feature of Vector VT-27 Smart Turbo is an increased power. In AM mode to 8 watts, in the ICM mode up to 20 watts. The display is slightly less than the vector VT-27 Smart, due to the absence of the S-meter.

Radio stations are interesting in turn with dimensions. Since most cars have no departments under a standard radio station. Minimalism in management is also one of the advantages of these radio stations.

Compact communication solutions always cause great interest among SI-Bi lovers. When it appeared, it was a breakthrough, no one had seen such a small radio station and therefore it was very interesting for everyone, how does it work and whether it is worth communicating with it. Then there was a radio station of even smaller sizes. And recently, at the beginning of the spring of 2015, another compact radio station appeared, which was supposed to change and make competition two of the above devices, meet - vector VT-27 SMART.

Preface

Initially, I did not want to write an overview to this radio station at all, since I always try to occupy a neutral position and I didn't want to have a sharp statement to the address of Vector VT-27 Smart to prevent work on this radio station. But time is coming, but no progress is observed. No work on the station is conducted, the company's employees at the beginning of the vigorous to make a technical task to correct obvious errors in the service of the radio station do not go out (guys woolly forums, studied the reviews, were interested). Since the start of sales, more than 9 months passed, and according to the latest data from the fields, from people who took these vectors recently, no progress in correcting errors in the firmware is not selected. Maybe I'm mistaken and something has already changed in best sideIn this case, let me correct in the comments, but I will tell me about the first version of this radio station, which appeared in early April of this year. If since then something has changed for the better and I will get into your hands already working as a station, the review will be supplemented with fresh data. In addition, I got the constant questions for this station on the site and in the group In contact with , And I'm tired of answering them too, so I hope that in this review you will receive comprehensive information about the radio station vector VT-27 SMART.

Appearance

A radio station is supplied in a small neat silver box with blue inscriptions. Printing is performed qualitatively, although it looks simple enough.


In addition to stickers S. serial numberI have no other identification signs and accompanying inscriptions within us that there is no other identification signs and related inscriptions within us.


Open the box and get the content. The kit includes a radio station with a non-removable headset. Fastening bracket, mounting kit and instruction. All small and neat.

The radio station itself is made in the form of a monoblock. The size of the housing can be called compact, but after imagination no longer amazed.


For comparison, photo s.


The hull is made of cast aluminum, like y.


Actually, vector VT-27 SMART as well as is done at the AnyTone plant. And in general, the station is quite similar, it felt that they came out of the hands of the same team of engineers. Such a housing is very well dispelled heat from the output cascade and voltage stabilizers, this is a big plus. Here, on top, there is a marking plate with a serial number.


The front panel is not removable and made of black textured plastic. Plastic is sufficiently pleasant to the touch and does not inclined to collect fingerprints.


The front of the front panel carries almost all station management bodies. Read more about them in the section about functions.


Display backlight is amber. The color of the backlight does not change. The display is well reading almost from all corners, it is, of course, plus.


The volume knob has a sufficiently comfortable size, and turn on / off the radio station, as well as adjust the volume is quite convenient for it.


The buttons below the display are signed according to the functions they perform and are also highlighted by amber color. The use of the station in the dark does not deliver the inconvenience.


Management deserves a separate narrative. The fact is that, to implement a full-fledged control, the front panel of the radio station is too small and if the developers have made additional buttons on the front of the radio station to them for ease of use, or it would have to make the case more, or do the buttons themselves less, which is also not convenient. Light heads from Anytone went to another way. Some of the buttons were transferred to the headset, namely the channel control and adjustment of the noise cancelors is carried out from the headset. It is quite unusual, but it is quite convenient. Press the button on the carcass, and then adjust the parameter from the headset.


The speaker of the radio station is small and flat. Located on the bottom cover, which, by the way, is also made of plastic. This is a classic layout option. Clear thing that should not be expected from such a solution to deep and noble sound. Little speaker working in a small box is simply not able to sound deep and beautiful. However, it is quite loud, in itself it does not rattle and for receiving / transmitting information is quite suitable, with its tasks copes well. Here you can also put a plus.


The only thing I did not like is, this is the plastic lid itself, it is possible that when used in conditions of strong interference from the on-board network, the latter will penetrate in a radio station completely unhindered.

The rear is connector for connecting an antenna (UHF), external speaker and power cable.


On the power cable there is only a fuse. No filters like or not provided. This is rather strange, since it is simply impossible to install full-fledged meal filters inside the housing. However, as the practice of VT-27 SMART showed, not particularly susceptible to interference.


Headset from Vector VT-27 Smart typical of modern radio stations released at the AnyTone plant. We have already seen such a headset from radio stations and.


In the hand lies comfortable.


As I wrote above, on the end of the headset there are two UP and DN buttons controlling channel switching and regulating noise picers. The headset cord is soft and elastic.

About TURBO version!

Radio station Vector VT-27 Smart has an older brother, in something pumped, and in something trimmed by Vector VT-27 Smart Turbo. These radio stations are distinguished by several things. First, this is the front panel. The vector version of the VT-27 Smart Turbo on the display does not have a built-in S-meter and the position of the buttons is changed. However, the purpose of the buttons remains the same as the vector VT-27 SMART. Secondly, it is work at a large output power in FM mode. If the usual version in FM mode gives only 8 watts, then the turbo version of 20 watts. Power in am remains unchanged! Moreover, if you take the filling of the radio stations (this is I'm already running forward), then besides the front panel, the turbo version differ from the version is not Turbo, only 6 details on the board. Well, the firmware of the processor, of course. And one more point, the firmware of the front panel processors are also different, in other words, it is impossible to just take and rearrange the panel with the vector VT-27 Smart on the vector VT-27 Smart Turbo. In the rest, these versions of radio stations are exactly the same and work is also completely equally.

Functions

The functionality of the station almost completely repeats this from the removed from production. In my opinion, completely in vain, it was an excellent, reliable station. But she came to change the compact vector VT-27 Smart and for those who dealt with the vector VT-27 Comfort CPU firmware Vector VT-27 Smart will seem very familiar. Apparently, the Anytone programmers gave and task to drive the functional one to one. With something, engineers and programmers coped, and something is not very. Let's figure it out.

Standard mode

  1. The A / SQ key (ASQ / SQ) is responsible for choosing and adjusting the noise reduction system. A long pressing on this button allows you to select a noise reduction system threshold (SQ), while nothing is displayed on the display, and the spectral-automatic (ASQ) is on the display, the AQ icon lights up. Short pressing on this button allows you to adjust the thresholds of the triggering of noise-raid. After a short press, for 3-4 seconds, the display shows the current setting of the selected noise reducer from the (noise reducer is turned off), to 2.8 (maximum noise reduction level). Total 28 points. For ASQ mode, the display shows characters from A.1 to A.9, only 9 adjustment points. ASQ Unlike SQ is not turned off. Another function of this key is the lock control. To do this, click and holding the A / SQ button to press the UP button on the headset. The keyboard lock is not remembered when the power is reset. Turning off and on the radio station will drop blocking.
  2. AF / M key (AM / FM, Memory) - is responsible for switching the AM / FM modulation type, as well as for switching between standard and professional mode, holding the key for more than 3 seconds (legacy), as well as for writing the selected channel to the memory cell in Professional mode.
  3. SC / RF key (SCAN, RF POWER) - short pressing on this key activates channel scanning mode. Scanning is quite slow and depending on the frequency standard goes within the same frequency grid. The scan direction can be changed by the button to switch the channels on the headset. Long pressing this button + buttons on the headset UP and DN allows you to switch output power Radio stations. At the same time, the display shows the pH symbols ( high power) and PL (low power).
  4. EM / B key (Emergency, Band) - serves for fast switching Between 9/19 (FM) emergency channels and 15 (AM) truckers channel. When the station is in this mode, the channel number on the display is constantly blinking. Long holding the EM / B key and simultaneously pressing the buttons on the UP / DN headset allows you to switch the operating grid of the radio station. A total of 10 grids are available, with A by L (available in the extended frequency standard 11).
  5. Radio volume control with on / off function.
  6. UP / DN keys Long-term pressing and holding these keys is quickly moving through the channels up or down.

Professional PROMEM mode

The so-called professional mode allows you to work with memory cells. This is quite convenient when we work in several channels of different grids, with different frequency shifts and modulations.

To go to operation mode with memory channels, you need to press and hold the AF / M key. The transition to this mode is possible only if you programmed in advance at least one memory cell.

To record the parameters in the memory cell, you must:

  1. Enable station as usual.
  2. Install the desired channel, grid and modulation type.
  3. Enter the memory cells programming mode, for this you need to press and hold the AF / M key and the UP button on the headset. Set need number Memory cells from N0 to N9. If when choosing a cell after N is a point, for example N.1, then this cell already busy. Cell settings are cyclically displayed on the display. Channel, Channel, Mesh.
  4. By pressing and holding the AF / M button, confirm your intention to record the channel selected by us in the selected memory cell. After recording next to N, the point appears.
  5. The output from the programming mode occurs automatically after 10 seconds, or by pressing the PTT button on the headset.

ATTENTION: specifically in this version of the radio station (most likely in the entire party), a couple was found critical errors In the work of the professional regime. For example, if you recorded a 24 channel with amplitude modulation into the memory cell, then in fact, in the memory cell you will have 15 channels in frequency modulation. Moreover, when trying to switch the type of modulation, nothing happens. In response to your click on the AF / M button on the screen, the AM and FM symbols will be cheerful on the screen, which in the idea should not occur, we rigidly programmed the channel, and its settings should not change. Moreover, the modulation will remain frequency! This is one of the problems of this version.

The second is more interesting, the problem is that if you are programmed a channel with -5kgz channel to any memory cell, in the frequency standard 11, you will burn the letter R, then the station processor will give the erroneous command to the frequency synthesizer and radio station in operation The memory channels constantly hang at a frequency around 28.5-30,7 MHz (depending on temperature). This is not climbing into any gate! In other words, if you want to write 15 channels with am modulation into the memory cell 1, then you have 15 channels recorded with modulation FM, which cannot be switched. And if you want to write 20 channels in zeros in the second cell of the memory (for work on passing, for example), then the radio station will generally demolish the tower and it will stop accepting anything and starts to transmit at frequencies even outside of amateur sites. It is worth returning to normal mode, as everything falls into place, and the station returns to normal functioning. Apparently, when an incomprehensible command is fed to the frequency synthesizer, it turns off, and at the same time the Gong moves to its maximum frequency. This is a clearly program error and moreover, it is absolutely impossible to solve this problem with the help of the soldering iron, it is only in the curve of the processor firmware, which is not possible at home and cannot be replaced at home!

To remove information from the memory cell, you must:

  1. Enter the memory cells programming mode, for this you need to press and hold the AF / M key and the UP button on the headset. Set the desired memory cell number from n.0 to N.9
  2. Press and hold the EM / B button more than 2 seconds before the point of the point between N and the memory cell number.
  3. To exit the programming mode, press the PTT button or wait for 10 seconds.

To scan through memory cells you need:

  1. In memory cell mode, press the SC / RF button.
  2. The scan direction can be changed with the UP / DN buttons on the headset.
  3. Scanning stops if the signal will be detected in the current channel and the noise will open.
  4. Scanning will continue, after 5 seconds after stopping or after 2 seconds after the signal disappeared by the opening of the noise-volume (depending on what happens earlier), if the tangent is not pressed or the scanning was not interrupted manually.
  5. Scanning can be continued by pressing one of the UP / DN buttons.
  6. If you click on the tangent (PTT) during the scan, then the radio station will switch to the "Dialog" mode, the suspension of the scanning mode. In this case, the scanning mode is not restored while the tanntant is pressed while there is a receiving signal, a noise canceller is open, the scanning is renewed after 10 seconds after the tangent of the tangent or the disappearance of another correspondent.

Enough comfortable modein which, if not for total malware problems, it is convenient to organize other modes, such as Dual Watch, Triple Watch (listening mode of two, three channels).

Inside

We remove the lid with the speaker and we offer a view of the radio station.

In general, everything is quite neat. AnyTone makes the station even for Alinco and watches the quality of its products. As well as on, a professional approach to the design of connected equipment is applied, the fee is attached to a cast radiator / chassis at 15 points, including transistors. It is very good.

I have already written above, the input chains are almost without filters, only the most primitive protection in the form of ferrite binoculars at the power input, the diode on the ground, and the filter capacity. That's all.


The first inventory filter is only one, for the second place it was not found.


Frequency synthesizer.


Receiver with filter second IF. Everything is standard here.


The output stage on the already known to all sewer 13n10. In the turbo version, 20 watts remove from it in high power mode. In the preliminary cascade costs 2SC2314.


Back side.

CPU.


Contour receiver.


Instrumental control

Check how real radio station parameters correspond to the declared. To remove the parameters, a professional ROHDE & SCHWARZ CMS 52 was used.

Receiver sensitivity:

  • Stated - 0.5 μV at 10 dB C / W in AM and FM.
  • Measurements - am - 0.28 μV; FM - 0.13 μV; These are excellent performance.

Audio output, power:

  • Stated - 1 W
  • Measurements - not distorted signal (less than 4% distortion) 0.65 W. Maximum volume 1 W (27.3% distortion). A notcribed signal is reached only in the position of the volume knob approximately 11 hours! Further, the signal begins to trim from the bottom and turns on top almost in meander.

Suppression of the mirror channel:

  • Stated - 70 dB
  • Measurements - 75 dB e that is very good.

Suppression of the adjacent channel:

  • Stated - 60 dB
  • Measurements - 55 dB, did not reach the stated values, but still the result is not bad.

Signal / noise ratio:

  • Stated - 45 dB
  • Measurements - 33 dB / 28 dB (AM / FM), not reaching the stated characteristics, but these are standard indicators for most Si-bi stations, so here without serious deviations.

Current current:

  • Stated - 300 mA (reception mode)
  • Measurements - 270 mA (receiving mode), 1,5A (transmission mode), these are normal indicators.

Transmitter output power:

  • Stated - up to 4 W, at 13.8 V
  • Measurements

Low power mode

  • AM - 4.2 W (carrier),
  • AM - 6 W (average, modulation of 1kHz).

High power mode

  • AM - 7.8 W (carrier),
  • AM - 12 W (average, modulation of 1kHz).

Low power mode

  • FM - 4.2 W.

High power mode

  • FM - 7.8 W.

AM modulation depth:

  • Stated: 85-90%
  • Measurements: 70-73%, the depth of the modulation is somewhat underestimated, but not critical. Can be adjusted to nominal values.

Frequency deviation:

  • Stated: 1.8 kHz
  • Measurements: 1.65 kHz, indicators are somewhat underestimated, but not critical. Here it would be possible to add deviation to 2 kHz.

Input impedance:

  • Stated: 50 ohm
  • Measurements: 54 ohms, good indicators.

Practice use

Having traveled for a test for a week with this radio station, I safely removed her to the shelf and that's why. What I liked. The size! This is certainly a very compact station. It can be said that this is its main plus. It is not very warm while working. The speaker is quite loud. Signals from ether are completely not bad. You get used to management quickly. Personally, I was first, somewhat annoyed, which you have to use the headset to adjust the noise, but this is a matter of habit. What really did not like. First, it is a complete lack of hysteresis at the threshold noise-lifter. During movement, it does not work out even the interference of the signals. Hysteresis at the squirrel of only 1-2 decibel, it is very small. Secondly, it is an automatic noise reducer. Here is the same system as, for example, in AnyTone AT-310M. The machine is tied to ARU receiver. This means that if there is a lot of interference or strong signals on the ether, the automatic noise reducer will open and will not be closed until these stronger signals disappear. It is very uncomfortable, especially in motion. Otherwise, very pleased the sensitivity of the receiver, he is really good. The transmission modulation is also quite decent, although, as usual, you can do even better. Decides that by bringing the VT-27 Smart to the mind to mind, it remains, I hope only for the service of the vector and the possibility of flashing in the future.

Outcome

As I have already written at the beginning of the article, I initially did not really want to write about the crude product, especially since the market that has just appeared on the market, but the constant questions of simple users of the Si-Bi range are pushing to the opposite. And so what do we end up? And we, in the face of Vector VT-27 Smart, quite a decent iron platform from Anytone with congenital features (shoals) in the form of a missing hysteresis at a squirrel, not a valid working machine and ... actually everything. The station has an excellent receiver, beautiful, for such a small Si-bishi characteristics (generally). But on this pluses and end, because practical use, all these technical specificationsAs a rule, it is departed to the background, and its Majesty comes to the fore. Convenience and trouble-free use. The radio station is completely unable to operate with memory channels. That is, at all. If they do not use and put up with inadequately working squirrels, in principle, use the station in some way. Moreover, they are asking for VT-27 Smart not such a lot of money. However, I still hope that in the future all these drawbacks will be corrected, and Vector VT-27 Smart will take a worthy place in one row with such a well-deserved station as becoming its decent successor. But at the moment, I can not recommend buying, according to quite objective reasons.

Vendor code: Barry ASC TXPR002.


Types of modulation F3E (FM) and A3E (AM).
Transmitter power: 4 W (AM and CM).
Sensitivity of the FM with C / W 20 dB: 0.35 μV.
Sensitivity AM with C / W 20 dB: 0.5 μV.
Power supply: 13.8 V or 24 V.
Current consumption 0.85 A at 24 V / 1.7 A at 13.8 V.
Power internal sound speaker: 2.5 watts.
Overall dimensions: 125 x 175 x 40 mm.
Weight: 0.9 kg.
Gross weight: 1260 grams (measured in Viva Telecom).

Features of the radio station:
Double nutrition.
7 colors display illumination.
Filter pulse interference.
Manual and automatic patented noise cancel.
Megaphone mode.

In promotion MychoicePresident When buying Barry and any PreSident antenna, get a 5% discount.

5 500 rub.

In stock: OK

Automotive / basic radio station with food OT. car cigarette lighter.

Operating frequency range: 27 MHz. (CE Sets)
Number of channels: 40.
Output power: 4 W.
Modulation types: AM, FM.
Radio Station Application:
Truckers, delivery services, autocouplements.

3 400 rubles.

In stock: OK

Automotive radio station Si-bi range.

Range of operating frequencies: 26,965 - 27,405 MHz (400 channels).
Output power: 4 W.
Modulation types: AM / FM.
Automatic / manual digital noise cancel.
Sensitivity: 1 μV (at 20 dB SINAD).
Sound speaker power: 4 W (with distortions of 10%).
Power supply: 12-14.5 V.
Overall dimensions: 122 x 35 x 195 mm.
Weight: 820 grams (with microphone).
Range of operating temperatures: -10 ... + 50 Sepher. Celsius.
Application areas: truckers, delivery services.
Communication range: 5-20 km (depends on the antenna used and terrain).

Features of the radio station:
1. USB connector for charging portable equipment.
2. Connector for connecting the headset.
3. The suppressor of the pulsed interference of the car.
4. Power cable with a car cigarette room.
5. Inverse display.
6. Connection feature Bluetooth headset (An additional Midland Wa-Dongle adapter is required).

5 600 rub.

In stock: OK

Vendor code: Truman ASC.

Automotive Si-bi compact performance radio station with automatic noise reduction function.

Range of operating frequencies: 26965-27405 kHz (40 channels).
Types of modulation F3E (FM) and A3E (AM).
Transmitter power: 4 W (AM and FM).
Sensitivity of the World Cup, AM with C / W 20 dB: 0.5 μV.
Power supply: 13.8 V.
Current consumption: 1.7 A.
Power of internal sound speaker: 2.0 W.
Overall dimensions: 45 x 125 x 150 mm.
Weight: 0.71 kg.
Gross weight: 1234 grams (measured in Viva Telecom).

Features of the radio station:
Filter pulse interference.
Manual and automatic noise cancel.
Simple control.
Block buttons.

9 100 rubles.

In stock: OK

Automotive radio station for work on the track.

Frequency range: CB.
Output power transmitter, W: up to 8.
Number of channels: 135 (CE, DE, EE).
The sensitivity of the receiver, MKV: (12 dB C / w FM, 10 dB C / W AM): 0.3 / 0.5.
Modulation type: AM / FM.
Power supply, in: 13.8.
Maximum current consumed, A: 2
Dimensions, mm: 42 x 140 x 130.
Weight, g: 600.
Blue display illumination, hybrid noise cancel (automatic combined with thresholds).

3 950 rub.

In stock: OK