How to configure Zyxel Keenetic Lite 3. Zyxel Keenetic Lite III: Setting up a network with step-by-step instructions. Login to settings

Before you begin to configure the router, check the connection settings on the local network. For this:

Windows 7.

1. Click on " Start", "Control Panel".

2. Click on " View network status and tasks".


3. Click on " Change adapter settings".


4. LAN connectionProperty".


5. From the list chosen " Internet Protocol version 4 (TCP / IPv4)"And click" Property".

6. "And", then press the button " OK.".

Windows 10.

1. Click on " Start", "Parameters".

2. Click on " Network and Internet".


3. Choose " Ethernet"And click on" Setting adapter parameters".


4. In the window that opens, we see " Ethernet"Click on it right-click Mouse, choose " Property".


5. From the list chosen " IP version 4 (TCP / IPv4)"And click" Property".

6. In the window that opens, you need to set ticks " Get an IP address automatically"And" Get the DNS server address automatically", then press the button" OK.".


Connecting the Zyxel Keenetic Lite III router to the computer

The next step will be the connection of the router Zyxel Keenetic Lite III to your laptop or Personal computer (PC). To do this, you need to connect the cable that you conducted a provider, to the port of the Internet "(this is the cable that goes into your apartment, a house, office, etc. from outside), and a cable that went complete with Router, one end connect to the port of the router "home network", and another end connect to your laptop or PC. And yes, do not forget to connect the power cord. Also on this router there is a switch if you configure the Internet with login and password entry, leave the toggle switch in the "main" mode.


Authorization of the Zyxel Keenetic Lite III router

So, they connected the router, now you need through any browser (be it Google Chrome., Mozilla Firefox., Internet Explorer., etc.) get into his web interface. For this, open the browser and in the address bar, drive the address of the router: my.kenetic.net. or 192.168.1.1 and press the button " ENTER"On your keyboard.

After, the router offers to produce fast setup, Select the interface language - "Russian" and press the web configurator.


After that, the router can display a window to configure the password to the Web interface. Here at your request, you can put a password, you can not. In the case of a password, write it down somewhere.


Configuring the Zyxel Keenetic Lite III router

Now it is necessary to make a router settings. The first thing to secure a wireless network by setting a wi-fi password. Then you will need to find out what type of connection is used to log in, it is PPTP, L2TP or PPPoE. You can find you by calling your provider (this is the organization with whom you have entered into an agreement to provide Internet services). So, let's start the router setting.

Wi-Fi password setup

I bring to your attention a video instruction for setting up a password on Wi-Fi on a router Zyxel Keenetic Lite III

Let's also write in writing and illustratively. Consider the password setting on Wi-Fi on the router Zyxel Keenetic Lite III in two frequencies.
1. Click on the Web interface to the bottom menu on the label " Wi-Fi network", I get into the network settings" Access point 2.4 GHz".
2. Checking whether the check mark is opposite " Enable access point", then in the field" Network Name (SSID)"Come up and specify your name wireless networkThis name will be laid in the future when you will connect to the network. I advise you to designate the frequency used to the network name, for example: "IMYA SETI 2.4".
3. "Network protection" - WPA2-PSK..
4. Now you need to put a password for a wireless network. In field " Network key"Invent and drive a password.
5. "Channel width" - "20 MHz".
6. Click " Apply".


Setting up PPTP.

PPTP. on router Zyxel Keenetic Lite III Using the example of the Zyxel Keenetic Omni II router.

PPTP.on router Zyxel Keenetic Lite III.
1. the Internet".
2. Select the tab " PPPOE / VPN."Press" Add connection".


3. Enable"And".
4. IN " DescriptionType (protocol)"Choose" PPTP.", "Connect through"Choose" Broadband Connection (ISP)".
5. Username"), Password (in line" PasswordServer Address
6. "Setting the IP parameters" - "Automatic".
7. Apply".


Setting up PPTP with static IP address

PPTP with static IP address on router Zyxel Keenetic Lite III
1. Click in the bottom menu on the label " the Internet".
2. Select the tab " PPPOE / VPN."Press" Add connection".


3. In the window that appears, check the presence of checkboxes opposite " Enable"And" Use to exit the Internet".
4. IN " Description"Enter any word by Latin, for example" HOST "," Type (protocol)"Choose" PPTP.", "Connect through"Choose" Broadband Connection (ISP)".
5. Below are invited to specify the username (in the line " Username"), Password (in line" Password"). You will also need to specify the IP address of the server (in the string" Server Address").
6. Manual"On the contrary" Setting the IP parameters".
7. Specify IP addresses and DNS.
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call hot line Your provider and find out how to get them.
7. After you have made all the necessary data click the button " Apply".


Setting L2TP.

I bring to your attention a video instruction for configuring the connection type L2TP. on router Zyxel Keenetic Lite III Using the example of the Zyxel Keenetic Omni II router.

Let's also write in writing and illustratively. Consider configuring the connection L2TP. on router Zyxel Keenetic Lite III.
1. Click in the bottom menu on the label " the Internet".
2. Select the tab " PPPOE / VPN."Press" Add connection".


3. In the window that appears, check the presence of checkboxes opposite " Enable"And" Use to exit the Internet".
4. IN " Description"Enter any word by Latin, for example" HOST "," Type (protocol)"Choose" L2TP.", "Connect through"Choose" Broadband Connection (ISP)".
5. Below are invited to specify the username (in the line " Username"), Password (in line" Password"). You will also need to specify the IP address of the server (in the string" Server Address"). All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
6. "Setting the IP parameters" - "Automatic".
7. After you have made all the necessary data click the button " Apply".


Setting L2TP with static IP address

Consider the connection setting L2TP with a static IP address on router Zyxel Keenetic Lite III. Typically, the static IP address is provided. legal entitiesOr as an additional service to the main tariff to individuals.
1. Click in the bottom menu on the label " the Internet".
2. Select the tab " PPPOE / VPN."Press" Add connection".


3. In the window that appears, check the presence of checkboxes opposite " Enable"And" Use to exit the Internet".
4. IN " Description"Enter any word by Latin, for example" HOST "," Type (protocol)"Choose" L2TP.", "Connect through"Choose" Broadband Connection (ISP)".
5. Below are invited to specify the username (in the line " Username"), Password (in line" Password"). You will also need to specify the IP address of the server (in the string" Server Address").
6. Since the connection uses static IP addresschoose " Manual"On the contrary" Setting the IP parameters".
7. Specify IP addresses and DNS.
All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
7. After you have made all the necessary data click the button " Apply".


PPPOE Setup

I bring to your attention a video instruction for configuring the connection type PPPoe on router Zyxel Keenetic Lite III Using the example of the Zyxel Keenetic Omni II router.

Let's also write in writing and illustratively. Consider configuring the connection PPPoe on router Zyxel Keenetic Lite III.
1. Click in the bottom menu on the label " the Internet".
2. Select the tab " PPPOE / VPN."Press" Add connection".


3. In the window that appears, check the presence of checkboxes opposite " Enable"And" Use to exit the Internet".
4. IN " Description"Enter any word by Latin, for example" HOST "," Type (protocol)"Choose" PPPoe", "Connect through"Choose" Broadband Connection (ISP)".
5. Below are invited to specify the username (in the line " Username"), Password (in line" Password"). All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
6. "Setting the IP parameters" - "Automatic".
7. After you have made all the necessary data click the button " Apply".


PPPOE setup with static IP address

Consider the connection setting PPPoe with static IP address on router Zyxel Keenetic Lite III. Usually the static IP address is provided to legal entities or as an additional service to the main tariff to individuals.
1. Click in the bottom menu on the label " the Internet".
2. Select the tab " PPPOE / VPN."Press" Add connection".


3. In the window that appears, check the presence of checkboxes opposite " Enable"And" Use to exit the Internet".
4. IN " Description"Enter any word by Latin, for example" HOST "," Type (protocol)"Choose" PPPoe", "Connect through"Choose" Broadband Connection (ISP)".
5. Below are invited to specify the username (in the line " Username"), Password (in line" Password").
6. Since the connection uses a static IP address, choose " Manual"On the contrary" Setting the IP parameters".
7. Specify IP addresses and DNS.
All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
7. After you have made all the necessary data click the button " Apply".


Firmware update, components

I bring to your attention a video instruction on updating the firmware on the router Keenetic Lite III For example routeetic router Omni II.

Connecting a computer to Wi-Fi

After connecting and configuring the router, you must connect the computer to the wireless network (Wi-Fi), consider connecting to Wi-Fi in two operating systems, it is Windows 7 and Windows 10:

Windows 7.

Video instruction

1.

2. Sultan.

3. Check the box in front of " Connect automatically" and press
"Connection".

4. Indicate Security keyOK.".

5.

Windows 10.

Video instruction

1. In the lower right corner of the desktop we find the wireless network icon (Wi-Fi), click on it with the left mouse button.

2. Pops window with a list of available wireless networks. Choose a wireless network, in my case it is a network " Sultanova."(You choose the network whose name was given at).

3. Check the box in front of " Connect automatically" and press
"Connect".

4. Indicate Security key"This is a wireless network password that you specified when you specify the key, click" Further".

5. We are waiting for, perhaps a couple of seconds and you connected to your wireless network.


Today it will be about setting up such a router as Zyxel Keenetic Lite. This is quite an inexpensive device with VPN, having convenient dimensions. In addition to the price and size, it has a good standard feature. Certain settings allow you to distribute the Internet speed between multiple users.

Regarding the characteristics. Manufacturers put a speed plank of 5 megabytes per second, when working via PPTP. It is worth reminding that our model has more full version (without the Lite console), so this older model has a speed limit of 7 megabytes. We will try to consider how to consider how to configure router zyxel Keenetic Lite C VPN.

Overview of appearance

Externally, on the back of the router, it is worth highlighting different ports and buttons:

· Place screwing antenna. Thanks to her we can use the Internet at a greater distance.

· Key that is designed to reset the settings. The button itself is inside the deepening, which is why it needs to be pressed. All so that no one accidentally reset the settings.

· Place to join the Internet. He is a wan port.

· Four LAN port, according to the standard. They are needed to connect a PC or a laptop to a router directly.

Externally, various indicators can be distinguished on the front:

· Starting from the left side, the first router status indicator is followed.

· Then from 0-4 go ports.

· After a wireless network status indicator is running.

· The last indicator determines the internet connection status.

On the top cover, in addition to the title, there is one key - the router power button. We do not consider the lower part, but it can be the necessary data and various serial codes of ZyXEL Keenetic Lite, the setting sometimes requires a look at the bottom.

Installing router

Instructions for installing the router C VPN is extremely short. Configuring the ZyXEL Keenetic Lite router has only 4 points:

1. We take to start the antenna of our device and fasten to your laid place, so that it is directed up.

2. Power supply that must be included in the kit, you need to connect to the power grid in your home, and the other side to the router. The power connector is called "Power".

3. Together with the router usually goes a short network cable. It must be pasted into one of the LAN network ports, and in its desktop computer or laptop. This is necessary for the primary setting.

4. The wire that provides the provider or the Internet company is inserted into the WAN port. You can distinguish this port by the fact that it is only one and another color.

Upon completion, you need to press the power key and make sure that the Internet Center Zyxel Keenetic Lite VPN has started. Please note that your PC should be well and join the router without any problems, because it may make it difficult to the primary installation. Drivers of your network card respond to joining. In the device manager, it is better to make sure in advance in their serviceability before you configure the Zyxel Keenetic Lite router.

Directly setting the router

To configure, you need to go to the site, as well as on the other routers. The address you need to register - 192.168.1.1. In the user name and password fields, you need to enter Admin and 1234 respectively. Click on "Login".

There are cases when this data does not allow you to log in. In this case, you need to update the router firmware, knock it down to the VPN factory settings. Then this password will be by default. Reset settings is simple and made by clamping the settings reset key ("Reset" button on the rear).

After you went to the desired site, go to the "Internet" tab. Here will be the drop-down list, there to choose "Authorization". On the tab, which has opened, you need to fill out some of the fields we need:

· Internet access protocol. Here in the list only PPPoe is interested. (But it is better to clarify the provider).

· Username and password are provided by your provider. Go most often in the contract.

· MTU better clarify your Internet company. Perhaps need to be left unchanged.

At this stage, the Internet should appear on the router and computer, which is connected via the LAN cable. To appear wireless internet, perform the following actions: Wi-Fi-Fi-Fi -\u003e Connection.

On this page, mark the "Enable Wireless Point" checkbox. In the SSID field, which is responsible for the name of your Wi-Fi enter anyone that you like. Click "Accept".

To protect yourself, you need to properly configure WiFi, put a password. Go to the "Security" tab. We choose in order "WPA-PSK / WPA2-PSK", "TKIP / AES", "ASCII", as it goes on the list. In the latter, which is called "ASCII" enter the password to your WiFi. It must be used when connecting a new device to the router. On this, the Zyxel Keenetic Lite router setting up.

In some cases, most often when using UTorrent, there is a need for forwarding ports. The easiest to use the UPNP service, which is built into the program itself. You can find it in the top tabs. First open the settings and choose the configuration there. Go to the item "Connections". Here there should be three ticks and one should not stand. There must be opposite: "UPNP Forwarding", "NAT-PMP Forwarding", "Establishing Firewall". It should not be opposite the "random port at startup".

Thanks to these ticks, the ports are obliged to work properly, but only if the router settings allow. How to check it? On the router's website you need to secure PC to a constant (static) IP. Home Network -\u003e Servers You must put a box next to "port redirects".

In the "Internet" tab, then "Routes" need to add the IP address of your computer, secure it with the button that is located right side From him.

Conclusion

In general, this is all you need to know about the configuration of the Zyxel Keenetic Lite router. Now you can easily connect to the Internet from any point of your home using the password you entered.

Video on the topic

Quickly you internet!

The new router from ZyXEL - Keenetic Lite III is a modern high-speed Wi-Fi router designed to connect any user devices to the Internet and IP television over the dedicated line.

The model is provided at once with two omnidirectional antennas to create a reliable wireless network with a data transmission rate of up to 300 Mbps, and the quality of the Internet connection does not depend on the position of the router (due to the wide angle of viewing space).

Also, Keenetic Lite III can be attributed to:

  • - the ability to simultaneously connect to several Internet providers (with managed access priority). Thus, when problems in the main network, the Zyxel Keenetic Lite 3 router is automatically adjusted to the spare channel and provides the user with a continuous Internet connection.
  • - Ability to work in the adapter mode. With this feature, it is possible to connect to a PC wireless network (which only Ethernet ports) without any additional devices.
  • - Protection of traffic from automatic viral attacks with free service Yandex.dns and an additional Internet filter to install websites and online services available to children.

Another beneficial property of the ZyXEL Keenetic Lite III configuration is the ability. remote access to home network via a VPN server. For example, you can download the report forgotten home forgotten home, check what your favorite child is engaged, or complete the quest in the game running on the home PC.

  1. How to configure Zyxel Keenetic Lite 3 router?

Setting wiFi Router Zyxel Keenetic Lite 3 can be carried out both using a PC (stationary computer, laptop, netbook) and using any mobile devices With installed operating system. In any case, it is first necessary to turn on the ZyXEL router to the power grid and wait until the Internet center is fully loaded (the status indicator will stop flashing).

Consider how to go to the zyxel keenetic router in more detail:

  • How to enter the Zyxel Keenetic router settings from a computer?

First of all, you need to install cable or wireless connection Between the Zyxel Keenetic router and this computer (about setting up the home network you can read in the articles and ).

To further configure the router, you must log in to its web interface. To do this, in the address bar of the browser you use the address my.kenetic.net. (or 192.168.1.1 ) And press ENTER (or "transition").

  • How to go to the zyxel keenetic router settings from a tablet pc?

For smartphones, tablets and other gadgets Alternative to the My Keenetic Net Adjustment is the Zyxel Keenetic NetFriend application.

To install it, you need to go to the site zyxel.ru/getapp And carefully follow the instructions of the automatic setup wizard.

How to connect the Zyxel Keenetic Lite 3 router: Step by step instructions

In the specified My Keenetic Net interface, the router can be configured both automatically ("Fast Settings") and manually ("Web Configurator").

When primary setup Zixel Kinetik Light 3 Your router can request enter the factory login / password, which are later recommended to change. If you have changed authentication data before, and now you cannot remember them, it is recommended to reset the router settings to factory and enter a pair of login / password from the router labels.

The first few stages of the Zyxel Keenetic Lite III settings are reduced to the instructions of standard information data (countries and cities), as well as the choice of supplying the Internet provider.

You will also need to specify the port for connecting iPTV consoles (if any) and, if necessary, configure the Yandex filter.

After exhibition required settings Zyxel Keenetic Lite III router Click "Update" and wait for full upgrade Components.

zixel Kinetics Light 3: Manual Setup

If you ordered a static allocated IP from the provider (which is only needed to large organizations, because for easy home use it is quite expensive and as useless), then in the "IP protocol settings" section, you should select manual setting IP addresses and in the opened graphs to register the IP address provided by the provider, the IP address of the gateway, the subnet mask and the DNS server.

In the future, any parameters for setting the router Zixel Kinetics Light 3 can be changed in the web configurator section of this interface.

Here, the section with the "Planet" icon will allow you to create and configure the current Internet connection,

a section with the "Network" icon - set the parameters of your Wi-Fi network.

Good day! Today we will talk about setting up zyxel Keenetic Lite III. it new router from Zyxel companies. This model Noteworthy committed WiFi Antennaswhich significantly increased the radius of reception and return signal, so that this router is perfect for large apartments and houses. I can only congratulate you with the acquisition of this router. In piles of instructions, I will explain in detail how to connect, configure the Internet, WiFi. This article will be useful not only as a novice, but also a pilot wireless device.

Connecting Zyxel Keenetic Lite 3 to Computer

Immediately I will say the rule setting of any router: any configuration of the router is best to produce on a computer or laptop connected to it. It is extremely unwanted to configure a WiFi router. Following this rule, let's connect the router.

  1. Modes - You must set this switch to " Main". Configuring other modes We will look at other articles.
  2. Power - Here we insert the power supply and click on the button. A power indicator on the front panel should be outline.
  3. Internet - connect the Internet wire provider. On the front panel, another 1 indicator indicator flashes.
  4. Home network - We take a short wire that went complete to the router (patch cord). One edge is connected to one of the connectors (1-4), and the other in network card Computer.

After connecting the router to the computer should be checked.

Reset to the factory settings of the Zyxel Keenetic Lite III router

To reset the default router settings, you need to press a special reset button. There is a reset button on the side panel of the router. Clean it with any subtle subject, while holding the front panel indicators will flash (this is somewhere 10 -20 seconds), then release. After a minute, the router will reboot, and the settings will be dropped into standard. The router must be included during the entire process..


Login to the Zyxel Keenetic Lite 3 web interface

After you have connected and configured the network card, you can start setting up. First enter the router interface. To log in to the Zyxel Keenetic Lite III router interface, you need to open any browser and go to any page (for example Google.com). Before you should open the welcome page. If the page does not open, then sucks in the address bar 192.168.1.1 or web address my.kenetic.net. And the welcome page will open.

Further, the router will suggest you to go fast to configure the Internet, but I advise you to immediately go to the web configurator. By clicking on the button, you will open the page on which the router will offer you to ask new password Administrator. It can be any. Fill in the fields, click on the "Apply" button.

The page will restart and the authorization window opens, fill it with: "Username" - admin, the password that you indicated above. Click on the "OK" button.


Configuring the Internet Zyxel Keenetic Lite 3

If, after you have connected a router to a computer, you have an Internet, this means that your provider uses a dynamic connection type. In this case, you just need to configure WiFi. But if the Internet does not appear, it means that your service provider uses a more complex connection type. In order to start configuring any type of connection, we will need to go to the Internet connection settings section. It is located on the bottom of the menu panel, in the form of a planet.

To configure the three main types of connectivity (PPPOE, PPTP, L2TP), hitting the Internet page, go to the PPPOE / VPN section and click the Add Connection button.

An example of setting up PPPoE.

This type of Internet connection is one of the most popular. This type of connection is used by the largest CIS companies, such as Rostelecom, Dom.ru, Megaline, Ukrtelecom. To configure, you need to fill the fields:

  1. Type (protocol) - From the list, select PPPoE;
  2. Username - We enter your login from the contract with the provider, if not - we specify with those supporting the provider;
  3. Password - your password from the contract with the provider;
  4. Configuring IP parameters - Select from the "Automatic" list;
  5. Save the settings by clicking on the "Apply" button.

An example of setting up PPTP.

As well as the previous type of connection, PRTR is a very popular its feature - this is use VPN Server. This type of connection is used by Togliatti Stork Providers, UFanet. Let's configure it by filling in certain fields:

  1. Type (protocol) - Select PPTP from the list;
  2. Connection through - choose our interface. By default, this is Broadband Connection (ISP);
  3. Server Address - Enter the address of the server, which is listed in the contract. Also, some providers call its VPN address of the server;
  4. The password is also in the contract with the provider. If not, check with those provider support;
  5. Configuring IP parameters - Select from the "Automatic" list;
  6. Service name, hub name, description - is filled only if there is a provider's requirement;

An example of setting L2TP.

A fairly new type of connection is not different in the setting from PPTP. Take up the Beeline providers, Kyivstar providers. Fill the fields for setting up:

  1. Type (protocol) - Select L2TP from the list;
  2. Connection through - select the interface that we set up early Broadband Connection (ISP);
  3. "Server Address" - the VPN address it must be specified in the contract, you can also learn from the provider;
  4. The username is your login from the contract with the provider;
  5. The password is also in the contract with the provider. If no specify with support with the provider;
  6. Setting the IP parameters Select from the "Automatic" list;
  7. The authentication method must be specified by the provider. But pre-put "Auto";
  8. Service name, concentrator name, description - is filled only in the case if there is a provider's requirement;
  9. After filling out all the fields, click Apply.


WiFi Setup on Router

After configuring the Internet, you can proceed to setting up WiFi. It is required to set the network name and put a wifi password, even if you already have a password. You can change it to any. In order to make it, we need to go to the WiFi section in the bottom menu:

Here in the Access Point section fill the fields:

  1. Network Name (SSID) - Here invent and write any name (Latin). This name will be displayed in the list. available connections on the device;
  2. Network protection - Here I choose WPA2-PSK;
  3. The network key is inventing here and enter the password to our WiFi;
  4. Channel - leave "Auto";
  5. The remaining fields are better to leave unchanged;
  6. After filling in all fields, click on the "Apply" button.


Video Example Quick Setup

.