Where are ftp total commander settings stored. FTP server connection. Login and password from ftp account
Hello everyone, in this article I will show you and teach you how to set up an FTP connection in Total Commander. Let me remind you that FTP is a data transfer protocol, and is mainly needed for transferring files over a network, or the Internet. Today we will set up file transfer in Total Commander. All you need for this is the Total Commander itself, and the access details for the connected node (Login or password, as well as the node itself, where we will make the connection). Let's open our Total Commander, and in the top menu, select the tab, as shown in the picture. Either a new FTP connection, or just select "Connect to FTP server"
After that, we will have such a window, it shows a list of our FTP connections, and since it is empty, we add a new one.
Click on the "Add" button, and a window appears with the settings of our FTP connection, or rather, you need to fill in the fields with the settings to configure the FTP connection.
Connection name field: in this field you can specify any name for your connection, for example "Free FTP movie server". Next, the server and port of our FTP connection is configured. This is a very important parameter, there should be no mistakes, because if this field is not filled in correctly, you will not be able to connect to your FTP server. As a server and port, you can specify either the server ip address, or site, ru, and so on. After you have entered your server address, fill in the "Account and password" fields. These fields are also required, without them, FTP connection will generate an error. We fill them in, and click "OK", after that, our connection is created. Here's an example of my FTP connection.
By clicking on the "Connect" button, I will connect to the remote directory using an FTP connection. After that I can download the information I need. I would also like to say that Total Commander may have a different version, or the interface may have changed slightly, it all depends on the build and version you are using, but the principle of creating an FTP connection through Total Commander is the same. That's all for now, if something is not clear to you, or if you have any questions, write to me, I will try to answer.
Dear readers, Today's lesson will be devoted to a lot of the well-known FTP client Total Commander. I will tell you how to work with the program and how to set up ftp in Total Commander.
To promote, improve or update a blog, we regularly have to dig into the code and work with its files. For these purposes, I use different tools - read - including Total Commander.
This program is very easy to use, especially for beginners. If you are not yet familiar with it, read the article and start mastering it.
Briefly about FTP connection and Total Commander
FTP- (File Transfer Protocol) file transfer protocol. An FTP client is needed in order to transfer files from a computer to a server and vice versa.
There are many FTP clients, one of the most popular being Total Commander. It is easy to use and has a user-friendly, pleasant interface. Disadvantages:
- ftp accesses are saved automatically and are not encrypted, which often leads to hacked sites - never save your passwords in Total Commander
- Total Commander is sometimes buggy, restarting it helps
It's time to move on to the main question: how to set up ftp in Total Commander?
How to setupFTP toTotalCommander
1. Download Total Commander from the developer's site: ghisler.com
2. Install it and run
3. Create an ftp connection by going to "Network"-> "Connect withFtp server " or by pressing the keys " Ctrl +F» 
4. In the window that opens, click the " Add» 
5. Enter the data provided by the hoster for the ftp connection. If you do not have them, please contact the hosting support service. 
- ANDconnection name - no matter what you write. This is necessary to make it easier to find the desired site, enter the address of your site.
- Server- enter the hostname or IP address that the hosting gave you.
- Account- enter the username (login) given to you by the hoster.
- Password - if you enter a password here, it will be saved in a file on your disk in an unencrypted form. NEVER enter your password here if you don't want to treat the site from viruses later.
- Remote Directory - This can be handy if you frequently visit a specific folder. Write down the path to it and after connecting you will immediately get into this folder. For example: blog / public_html / wp-content / themes / theme_name
It happens that the standard operating mode does not work (an error occurs), you can check the box “ Passive exchange mode"- might work.
Click the OK button. If you did not enter a password, a separate window will pop up asking you to enter it - now you can enter. If you entered everything correctly, then automatically connect to the server.
Now when you need to connect to the ftp server of your site, click "Network"-> "Connect withFtp server ". In the list of connections, select the desired site and press the button " Connect". Setting up ftp connection in Total Commander is over!
Where does Total Commander store ftp settings
You already know the sad story that all entered server accesses are in one file. You can find it at: C: \ Users \ User_name \ AppData \ Roaming \ GHISLER \ wcx_ftp.ini
When you reinstall Windows, copy this file so you don't have to reconfigure all connections.
How to work with Total Commander
Let's talk about how to work in Total Commander.
In the left half, your website is open, in the right half, your computer. You see a list of files and folders and you can navigate through them. It is convenient to use hot keys, when performing actions on files and folders, they are signed at the bottom of the buttons:
F5 - copy, F6 - move, F7 - create folder, F8 - delete file or folder.
If you select a file on the server and press F5, then it will be copied to the folder on your computer, open on the right, after which you can edit it and upload it back. You can also press F4 to edit files - the editing mode will open directly on the server. 
File and folder permissions (attributes)
When working with sites, you often have to set permissions for files and folders. It is very simple to do this through Total Commander: open the menu "Files" -> "Change attributes" and tick the necessary combination.
Enough for today, now you know everything about setting up ftp connection of Total Commander and know how to work in it ... If you have any problems, write in comments.
Good luck to all!
The simplest connection to an FTP server can be made using the usual and standard file manager - Total Commander, which is installed on almost every office and home computer. At the same time, we are not considering more complex options with downloading special FTP clients, programs that need a separate step-by-step installation (at least not in this article).
Who needs an FTP server connection and why? The question is multifaceted and has a whole lot of different answers. Some users in this way connect to file storages on the Internet, others - webmasters - use FTP to upload files for their own sites, install plugins, modules, and in general, all kinds of work with the file system of a virtual project. But since you are looking for this topic - apparently, for some reason you needed it, which means that the site is simply obliged to provide a simple and quick step-by-step solution to this problem, which we will do right now!
Connecting to an FTP server: step by step instructions
1. First, you need to make sure that a reliable FTP client is installed on our computer - a licensed Total Commander through which the connection will be made, access passwords are saved.
2. If an unknown assembly of Total Commander has already been installed, among other software, we still recommend that you delete the incomprehensible version (downloaded from the Internet), replacing it with a licensed product that will 100% not steal our FTP passwords!
3. As soon as we are confident that Total Commander is "clean", that our passwords will not fall into the hands of unauthorized persons, we proceed to setting up a connection to the FTP server.
Note: since everyone has different hosting, servers, logins and passwords, the author of the site is simply not able to accurately name your personal data. In this regard, we can only describe the general process of work, and the personal data of users and sites will always be different - yours.
3.1. We go to the server used (usually hosting) and make sure that FTP access is open and allowed:
Access is allowed:
3.2. If you have not yet created an FTP account, then create one. But usually the main custom FTP hosting channel is created automatically when the FTP service is connected.
New FTP account:
In any case, to connect to the FTP server, you will need:
1. FTP server address - can be found on the server (hosting).
2. User account of hosting (server) - in fact - Login in the system.
3. Access password - the password for the created FTP-account (look at the server).
3.3. Let's start setting up an FTP connection, run:
Total Commander - "Network" - "Connect to FTP server" (key combination Ctrl + F)
3.4. Click the "Add" button
3.5. Fill in the required fields:
Connection name - Any arbitrary name (does not matter)
Server (Port) - We look at the hosting (in our example, "pod-kopirku.jino.ru")
Account - Login on the server (in our example "pod-kopirku")
Password - Password from the FTP account on the server (********* - hidden by asterisks).
3.6. Upon completion of entering the secret data, which in each case will be individual (if you do not know anything, check with the server's technical support), and click "OK".
4. If all the data is entered correctly, a new FTP connection will be created, to connect to which it remains to press the "CONNECT" button.
A server will be launched in the active panel of Total Commander, with which you can now perform any permitted operations: upload and delete files, copy and rename directories, make necessary edits, etc.
And finally, a small useful video for all site readers to finally consolidate the above material!
Every blogger, not to mention a webmaster, just needs to be able to set up an ftp connection and it is also desirable to know how to download, edit and upload files back to the server.
All this can be done through file managers, with a built-in ftp client. There are many programs that allow you to work through an ftp connection to the server on which the site is located.
The article will talk about how to configure ftp via Total Commander Is a very popular file manager at the moment.
One of the first things a blogger encounters is confirmation of site rights in Google and Yandex accounts. The easiest way to upload a file of rights confirmation via ftp is through Total Commander (in our case). Or through any other ftp client.
You can still download Total Commander for free on the Internet, most likely on torrent sites.
Editing via Total Commander
There are many settings in Total Commander, but I will only consider the possibility of FTP connection and editing files.
First you need to configure, add to Total Commander, an editor with which it will open files for viewing and editing.
In addition to Total Commander, you will need an HTML editor.
Download and install the editor on your computer, the simplest and most convenient is Notepad ++ and remember in which directory it is installed. A lot has been written about him, there is a video on the settings.
So, open Total and assign an editor:
On the screenshot, the Total Commander interface, go to the configuration tab.
Next, we assign an editor to view and edit files via ftp via Total Commander:
Do you remember in which directory you have your HTML editor exe file? It must be specified, thereby assigning it for viewing and editing via Total.
At the top, install the program for viewing files.
Below we install the program for editing, editing files via ftp via Total Commander.
Arrows >> - browse folders and files on your computer to make it easier to find and assign a program, for example Notepad ++, as an editor. I have Sublime Text Editor installed as my editor.
This completes the first stage.
Configuring FTP via Total Commander
So, in order to connect to the server, you need to know the login and password from the ftp account.
Login and password from ftp account
The login and password from the ftp account can be found in the hosting control panel, the keys to ftp are usually provided by hosters when registering on the hosting, or you can check with the support service.
Open Total Commander and go to the FTP tab and then Connect to the FTP service ...:
Go to the Add tab, where we will be directly and will make an ftp connection.
For ftp connection, specify the account data
Connection name - can be any arbitrary name, you can name it as you like. The names of ftp connections can be seen in the previous screenshot.
Server, Port - indicate the server on which the site is located, it is provided by the hoster during registration, it is also indicated in the hosting control panel.
You can also simply specify the domain name of the site as a server for ftp connection. It will look something like this: ftp: // domain_name Instead of http: // just replaced with ftp: //
An account is nothing more than a login from an ftp account.
Password - specifies the password for the ftp account.
Well, press the OK button.
View and edit files via FTP via Total Commander
So the final stage is left - viewing and editing server files via ftp connection.
by the way
In order to upload a file to the server, or vice versa, download a file from the server to a computer via ftp via Total Commander, just drag and drop this file into any desired directory or folder.
This is how the root directory of a WordPress site looks like. For example, we will edit the robots.txt file.
Click on the desired file with the right mouse button and select the desired operation in the window that appears. In this case, I selected the Edit tab
Well, we edit files via FTP via Total Commander
This is how the robots.txt file looks in my HTML editor. I make the changes I want and save the file. Everything, the edited file is automatically downloaded to the server.