How to flash Lenovo A6000, install root and TWRP Recovery. Lenovo A390 and A390T phones firmware firmware on Lenovo A

Instruction, with a detailed and step by step explanation, on the firmware smartphone Lenovo. A6000 on Novaya android version OS, update, custom firmware. And also getting root (superuser rights) on Lenovo A6000 and installation of custom recar TWRP Recovery..

Instructions for firmware Lenovo A6000

Before the firmware of the smartphone, it is necessary to charge it up to 100% first, and in the meantime, while the phone is charging downloaded on your PC required files, namely:

Unpack the archive by drivers and start the installer on behalf of the administrator. All items Choose by default, press everywhere Next

Take the Lenovo A6000 phone and turn it off by closing the volume button up, turn on the A6000 power button, after the vibration release the power button and then release the volume button in the PC after a couple of seconds.

Next, download the program itself downloader Lenovo v1.0.2, swinging archive Unpack into the folder without spaces and Russian letters on the way. Start the flash driver on behalf of the administrator:

The program settings do not need to be changed, select the folder to which you unpacked the archive with the Lenovo A6000 firmware:

After you have chosen the firmware, we boldly press in the upper left corner on the arrow, thereby launch the firmware process. Then turn off the smartphone, clamp the volume button up, turn on the power button to the smartphone, after the vibrator releases the power button and then release the volume button after a couple of seconds - you will see such a menu:

And only then plug your Lenovo A6000 to the PC using a complete USB cable. The program itself will translate it to the firmware mode (download mod) if you connect it for the first time, the drivers of new devices will be installed and only then the smartphone will start flashing. Usually the firmware process takes 6 to 7 minutes, but time can change, it all depends on your computer. At the end, the program will report to you:

All! Disconnect the smartphone, after the first start, enter the desired region code, after changing the region I recommend immediately to make Vipe - and use your smartphone!

Installing custom Rekovery (Recovery) on Lenovo A6000

Download to your PC ADB Recovery Flash and unzip. Run Flasher Recovery.exe.
After starting, you need to select the required version of Recovery (by means of entering the number that matches the desired item), and press "ENTER".
There is also additional functions How to download to Recovery or Bootloader.

That's all.

Getting Root on Lenovo A6000

For getting Root On the Lenovo A6000 smartphone should be a custom recovery (Recovery) TWRP. Only through it can be installed files. If you have already installed TWRP Recovery, then download these archives.

Smartphone Lenovo A390 is equipped with operating android system 4.0 (Ice Cream Sandwich), which provides multi-functionality and maintains interactive operation. But despite the rather high technical indicators of this OC, more and more users prefer to improve it, that is, "reflash". It is the firmware of the Lenovo A390 smartphone that is the most effective way Enhance the performance of this device.

Using the firmware step-by-step algorithm below, you can also change software And the Lenovo A390T smartphone, simply using the corresponding drivers.

For change operating system Smartphones traditionally use two ways: program Flash Tool and recovery.

Changing the firmware using SP Flash Tool

"Preparatory work" To change the firmware through the SP Flash Tool consist of several stages.

  1. Need to download on computer USB. Driver, SP Flash Tool and actually drivers for firmware Lenovo A390 (links at the end of the article).
  2. You need to unpack all archives and install USB Driver on your computer. To do this, connect the device to the computer and on request to install the drivers, specify the path to files from the archive. On the request for the installation of unsigned drivers respond yes.
  3. It is advisable to save the back-up "s, so that, if necessary, you could restore the previous settings. To do this, enter menu Recovery.By climbing the phone (up) button on the off phone along with the power button. Find the Back-up folder and select Files to save (including and recovery), and place in the phone where to send them. After completing the process, click Reboot. We also advise just in case to keep the folder with the back-up "Ami on the computer.

Now you can proceed directly to the change of software.

We flash Lenovo A390 using SP Flash Tool

  1. In the Sp_Flash_Tool folder ... Find and run the file flash_Tool.exe..
  2. In the window that opens, click on the button.
  3. Specify the path to the folder where the firmware for Lenovo A390 is stored, open text Document MT6577_Android_scatter_emmc.txt and click on Upgrade..
  4. Turn off the phone power, connect it to the computer via the USB cable and wait until the firmware is installed. If all actions are performed correctly, the red strip is displayed on the screen, then purple and yellow. Next will appear a green circle that signals the successful completion of the operation.
  5. Disconnect the USB cable and enable your updated phone.

Change firmware via Recovery

Let us turn to the second method of changing the firmware Lenovo A390 and Lenovo A390T. In this case, first you need to remove the user setting from the smartphone, and then install the firmware itself.

  1. Download the appropriate firmware for your phone model (look at the end of the article).
  2. Reset it on the memory card or on the phone.
  3. Disconnect the power of the smartphone and enter the RECOVERY menu by closing the volume swing up along with the POWER button.
  4. Using the volume button, move up and down the menu that opened. Using the POWER button, click on WIPE DATA / factory Reset. - YES and on Wipe Cash Partition - Yes.
  5. In the menu, click on the APPLY UPDATE FROM EXTERNAL line (if the firmware folder is on the SD Card) or Internal Storage (if you have copied it into the phone's memory).
  6. Finding a folder S. required drivers, Press the POWER button and wait for the firmware installation.
  7. Select Reboot System Now.

After all, it is recommended to completely disable the device, remove the battery for 30 seconds and then insert the battery back. Remember that the responsibility for all the actions produced lies with you, and the guarantee on the smartphone is canceled in the case of such interventions.

Sometimes our mobile gadgets begin to behave inadequately. There may be several reasons for any. But most often this behavior is associated with the firmware of the device. For some reason, it was damaged and therefore began to work unstable. In this case, the flashing is required. There were those times when this procedure had to go to service centers. Now you can flash the device any user. Consider the firmware process. For example, consider how to flash "Lenovo A319".

What is this device?

Refers to the budget line of devices with advanced functionality. He perfectly copes with all the tasks and has a high-quality sound. But more valuable in it is that it is very well reflashing and customization. Only he, like all the devices on the MTC platform, very often has the property to lose IMEI after flashing. But it is possible to restore it very easily. Nevertheless, we turn to the most interesting. How to flash through the computer?

Firmware with PC

Yes, if you install the official firmware from Lenovo, then without a computer, it is not necessary here. First of all, you need to download the entire driver package for this gadget. Then download the program for the firmware, which is called SP Flashtool, and the firmware itself. First you need to install all the drivers and only then go to the next stages of the process. In some cases, you have to turn off the check digital signature In Windows. But now we learn how to flash "Lenovo A319".

After installing the drivers, we throw the firmware file to the folder with the downloaded program. Turn off the machine and remove the battery from it. Now we run SP FlashTool, in the window that opens, by looking for the "Scatter Loading" button and click on it. Select the firmware file with extension. TXT and the word "scatter" in the title. Next, click on the "download" button. Now you can attach the shutdown smartphone to the PC. The installation of the firmware will begin. The process will be completed after the green mug with the text "OK" appears on the monitor screen. Turn off the gadget from the PC and reboot it. So you can flash "Lenovo A319". The instruction is simple and understandable.

Firmware without a computer

There are some of the unofficial (custom) firmware for this smartphone. They need to be installed on another algorithm. PCs are needed only for installing custom, unlocked recovery. Everything else is done using a Micro SD memory card. How without a computer? First you need to download installation file. Castomous recovery. Then connect the device to the PC, turning on it before you click on the recovery and install it on the machine. Now you can proceed to the firmware itself.

Before flashing "Lenovo A319", you need to download the firmware itself in zip. And throw it into the root of the memory card. Then you need to turn off the phone and turn it on in the recovery mode ("Volume up" button plus "power"). Here you need to first select the item "Wipe Data & Factory Reset" to reset the gadget settings to the factory. Then find the item "Install Zip From SD Card" and click "OK". The firmware process will begin, which may take pretty long time. After completing it, you need to click on the "Reboot System Now". The first load can last from 5 to 10 minutes. Now you know the answer to the question of how to flash "Lenovo A319" without a computer.

Using customs

Many love custom firmware for their performance and undemanding system resources. However, the installation of such an OS is fraught with serious consequences for the smartphone. The user is deprived official updates. But these are still half. The fact is that such firmware is extremely unstable. In addition, they are not protected from the invasion from the outside. If a official versions They receive patches and corrections to safety problems, then custom firmware is deprived of such support. Yes, they are assembled by the curriculum "hackkers", which only recently mastered the "Android". Therefore, if you change the firmware, then only on the official one. For stability, security and timely updates above all. It is not recommended to use firmware from third-party developers. For the consequences can be unpredictable.

Summary

Such gadgets like "Lenovo A319" are well refreshing. And this is only plus to the manufacturer. Because sometimes there are cases when the original firmware is buggy, but to contact service center There is no time or funds. It remains only to flash the gadget itself. Now you know everything about how to flash "Lenovo A319" through a computer and without it.

Detailed installation instructions official firmware on Lenovo A319 via SP Flash Tool.

    Drivers and programs

Attention!

Installation Instructions

    To do backups Required user data.

    Disable drivers authentication.
    Windows 7.
    While turning on the computer after bios downloads, you need to press the key F8.. In the menu " Additional download options" choose " Disabling mandatory driver signature». This method can work not from the first time, so you should repeat the action or open command line On behalf of the administrator and enter two teams:
    « bCDEDITIT.EXE / SET LOADOPTIONS DDISABLE_INTEGRITY_CHECKS»
    « bCDEDITIT.EXE / SET TESTSIGNING ON»
    Windows 8.
    Need to press the keyboard key WIN.+I., clamp the key Shift. And choose the item "". When you turn on the computer, select " Diagnostics» > « Extra options» > « Download options» > « Reboot" When you download select "" by pressing the key F7..
    Windows 10.
    You must clamp the key Shift. and choose the menu " Start»\u003e" ". After downloading, choose " Troubleshooting» > « Extra options» > « Download options» > « Reboot" Then choose the item " Disable mandatory verification of driver signature"By pressing the key F7..

    Download Archive with the Sp Flashtool utility and unpack any folder.

    Download and install drivers for correct operation SP Flash Tool.
    To do this, unpack the archive with drivers into an arbitrary folder. Then open " Device Manager", Select the name of your computer in the list (first element), then click" Act» > « Install an old deviceFurther" Then choose " Installing the equipment selected from the manual list"And press again" Further" After choosing " Show all devices"And click" Further" Now press the button " Install from disk", In the window that appears, click" Overview", Find and select the downloaded driver file, depending on the version of the OS and click the" button " Open" Then click " OK." In the new list choose " MTK USB Port."And click" Further" Agree with a warning by clicking " Still install this driver"And complete the installation by clicking" Ready" Now the list of devices will appear a new device named " MTK USB Port (COM3)" In chapter " Ports (COM and LPT)"You need to delete, but leave the driver. Select a new device and click on it right-click Mouse. IN context menu choose " Delete" In the appeared window, click " OK.", Making sure that item" Delete drivers for this device"Inactive.

    Download archive with firmware (for example, this) and unpack it into an arbitrary folder.
    It is recommended to use the path to the folder without Cyrillic characters.

    Turn off your smartphone and remove the battery.

    Run the SP Flash Tool utility and go to the " Download».

    In the program, specify the path to the Scatter-Loading file (which is in one folder with custom recovery) by clicking on the corresponding field " choose».

    Then I alternately press the column " Location»Each row and select all the necessary files if they were not selected automatically.

    In the program menu, select " Options.» > « Option ..." Go to the tab " Download"And activate points" USB Checksum."And" Storage Checksum" In chapter " DA DL ALL WITH CHECKSUM».

    If the smartphone was in a state of "eternal boot, you need to format it before installing the firmware.
    To do this, go to the tab " Format.", Activate items" AUTO FORMAT FLASH."And" FORMAT WHOLE FLASH EXCEPT BOOTLOADER" Then click " Start."And connect the disabled device to a USB cable PC.
    After completing the operation, disconnect the smartphone from the PC.

    After all files are prepared to press the " Download"At the top of the program.

    Smartphone without battery immediately connect to a computer via a USB cable.
    It is recommended to use the original or cable. good quality, as well as uSB port 2.0 located on motherboard (for PC).

    SP Flash Tool recognizes the device (if the drivers were installed correctly) and the firmware installation process will begin.

    After successful installation, insert the battery back the battery into the smartphone and turn it on. After some time, the device will boot and will be ready for further work. The initial launch usually takes a long time, but not more than five minutes.
    ATTENTION!
    If an error 4032 occurs during the firmware, then the following should be done.

The advantages of the Lenovo A319 smartphone are well known to everyone - this is worthy performance at a reasonable price for the phone. But as far as reliable, neither the technique, sooner or later the phone Lenovo begins to "bug". Most often it is due to the emergence of problems with some kind of hardware program. Only specialists can solve this question, because it is difficult to understand what is not in order.

There is I. alternative option - Put a new firmware on the phone. This process is similar to the change of the operating system on the computer. And the consequences are the same - all the data stored on the device will be deleted. But if you regularly retain them on another carrier, it is unlikely to be a problem. But after installation new firmware You can use your smartphone as new.

You can independently flash the Lenovo A319 phone in several ways, and each of them is equally effective. Therefore, you choose what is more convenient. We briefly describe the peculiarities of each method that allows you to make a flashing with your own hands and in a short time.

Mandatory preparation

Before you start installing new operating programs, you need to make sure that the phone is charged more than half. It is extremely important, because the operation of the operating system will require energy, and without its reserves this process It will be impossible to fulfill successfully. Also check if there are current USB drivers on your computer so that the PC can recognize the phone as a connected device.

If the memory cards are installed on the phone, they must be learned to avoid data loss.

FlashTool program

The official Flashtool program is designed specifically in order to engage in the firmware of smartphones on the Chinese MTC Platform. Just uses in the production of Lenovo. So with its help you can reflash any Lenovo phone. Below is given step-by-step instruction Work with the program:

  1. Download and install the drivers for specific model phone To install, first connect the phone to the computer, go to the "Device Manager", we see a new connection and update the driver. We recommend to put them only from the official site of Lenovo. As a rule, they do not "fly" during use.
  2. Download flash programTool, unzip the file with it and install it in a convenient folder of the computer.
  3. Swing the desired version of the firmware. Use only proven sources to not harm the smartphone.
  4. Run FlashTool and specify the path to the downloaded firmware. All the files you add, immediately appear on the screen.
  5. Turn off the Preloader to avoid problems. In addition, no ticks should be cleaned.
  6. We connect the smartphone to the computer and make it on the "download" in the window that appears.
  7. The device is recognized by the system and immediately starts the automatic phone firmware.

Disconnecting the gadget from the computer, turn on the telephone flashing flash drive. It is necessary to check its performance. Spend primary settings, and if everything is in order, it means that with flashing you coped perfectly.

Refracting through recovery

If you are interested in how to flash the phone to install a new software, but you want to update the system to new versionthen you can do without the Flash Tul program. To do this, need a recovery phone. This is done as follows:

  1. We receive superuser rights to edit system files.
  2. Download TWRP Recovery for a specific smartphone model.
  3. Install the MobileUncle MTK Tools utility.
  4. Run the program and using it by selecting the appropriate file in the Recovery Upgrade Count, run the firmware update process.