Connecting DVD drive from a laptop via USB. Installing a DVD-ROM and drive. Installing a new drive in the system unit

If the list detected "Unidentified device", need to "Update Drivers" by clicking on the device with the right mouse button. In the next window, select " Automatic search Drivers. " You can use the Internet to search for drivers.

The drive is still recently an obligatory element in any computer, today gives the positions of flash drives and goes on peace. Manufacturers caught this trend and now with joy followed by him, refusing to install the drive in computers and laptops. But what if you need a drive? About this - in our article.

First you need to decide why we need a drive. We are not talking about its type - he must be able to read and write DVDs by default, such a time. But there is a concept as a connection type - an interface that our drive connects to a computer. It has to choose it.

The easiest way to identify this is a visual inspection of the motherboard and the definition of available places to connect.

Tell in order:

Considered motherboard? We estimate the presence of free ports. If there are several SATA free ports and the IDE port, you definitely need to choose the first option. Pluses him seriously more, and it is easier to connect. If the free port of SATA is one, then you can think about it - suddenly you want to connect another hard disk to the computer? I need this port more. Well, the easiest option - if you have either SATA ports or IDE. You do not have a choice, proceed by circumstances.

Removing an old drive

To do this, you will need the middle thickness of the cross screwdriver with a good slot and vacuum cleaner.

Note! In advance, take care of the assembly of fixing fittings in a separate place - it will help very help with reverse assembly. It is very unpleasant to look for bolts throughout the apartment.

1. Remove the side covers from the system unit. To do this, unscrew the screws on the back of the screws on each side and pull the covers back. Fixing them for a couple of centimeters and freeing the grooves, remove the covers.

   

2. It is time of vacuum cleaner. Gently, without touching the electronic components (this is important!), Remove the top layer of dust. Remains better remove with a cylinder with compressed air - less risk damage components.

   

3. Find your drive from the inside. Remove the flames from the loop with a screwdriver. Be careful!
4. Gently remove the loop from the drive connectors and the motherboard. Then pull the power.

   

5. The drive is fastened with sufficiently thin screws on the sides - their number ranges from two to four on each side. Remove them and remember the approximate position.

   

6. Now delete the drive. Pull it inside the system unit and pull out, trying not to touch the rest of the computer components. If the drive does not stretch inside, push it from the inside to out and pull on yourself.

   

Note! Some models of system blocks do not allow pulling the drive inside. Pulling out the outside prevents the front panel - for example, disc compartments have rounded edges for which the drive is clinging. In this case, you need to remove the front panel, unscrewing four bolts or rejected the latch in four places. Do it with marginal accuracy: the system unit with an unreliable fastened front panel will finally lose its presentability.

Installing a new drive in the system unit

In addition to the screwdriver you may need Pasaltia.

On a note! If you replaced the drive and completed the previous item to remove the old one, then you have already prepared everything for installation.

Now we will look at how to be those who want to put a drive in new computerwhere it has never been, or wants to put a second drive in addition to the old one.

1. Using the instructions from the previous item, open the system unit and remove the front panel.
2. Gently pull out one of the plugs for five-lifted devices from the front panel. Try not to break the grooves, as it can come in handy in the future if you want to get rid of the drive.

   

3. Using the passage, break the metal plate opposite the selected plug on the front panel. The plate is already not useful for sure, so just take out. You can bend.

   

4. Pull out a new drive from antistatic packaging. Remove all transport stickers. Gently insert the drive in its place in the system unit.

   

   Note!It would be nice to find complete bolts from the system unit, but there are no such, buy four or eight bolts together with a drive for fastening.

5. Secure the drive with screws. Watch out for its position: it is important that it is carefully combined with the front panel. One way or another, its position can be adjusted after.

   

6. Install the front panel in place. If the drive has not coincided with it, loosen the screws and move it to the desired position. Tighten the screws.

Connect the installed drive to the motherboard

Consider first option with IDE

IDE is an old format with its setup rules. The loop implies the installation of two devices, so it turns out that one device is always the master ("master"), and the other is always slave ("slave"). This is the problem if the connected drive is not determined. To troubleshoot it, check the position of the jumper on the back of the drive. Pay attention to the screenshot.

Universal case: if your loop drive is one and connected by the extreme connector, then check the jumper to the left position ("Cable SELECT", or the connection type auto definition). If there are two drives or devices at all, the jumper should take a position based on the device position: if the destination is the "Master" connector, that is, the right position if the average is "slave", that is, the average. but motherboards The IDE exists for a very long time, so they can easily not meet the standards. In this case, the Council is one - refer to the instructions.

Now option with SATA

It remains only to close the side covers, tighten their mounting screws and proceed to using the computer. Ready!

Video - Connection (Installation, Replacement) PC Drive

The market filled netbooks - devices in which the CD or DVD drive is not provided. Even Apple refuses these bulky and outdated devicesBut the company at least applies USB Flash to reinstall the system or launch auxiliary utilities. And ordinary users get a chance of the already installed system.

All installation instructions or reinstalling Windows On a netbook without using a DVD drive (from flash drive) so overloaded and intricate that it is not easy to understand them. It used to be easier: drive into the drive and drove. Now it is also possible, only the drive is needed external.

External DVDRW drives for laptops with connecting through a regular USB are expensive expensive. Today the price begins from 1650 rubles, and the upper threshold comes to three thousand. Considerable money for the thing that will be needed a couple of times a year.

Therefore, today we will collect external USB DVD drive From matches and acorns that will be much cheaper. As far as significantly - depends on your ingenuity and resourcefulness.

The drive itself I purchased in the DNS store in the DNS store - one laptop drive cost me only 35 rubles. Yes, yes, thirty five rubles for a DVD cutter! Here are the models that are right at the time of writing:

It became a bit more expensive, but you can always buy any laptop drive on a flea market or with hands. If only he worked and had an SATA connection interface. The presence or absence of the front panel of the role does not play - this is an exclusively decorative element.

The second item that will surely need us - USB box for HDD. We need a laptop disk box with SATA connected. The new box is from 400 rubles, but you can find and cheaper, if you search this product with hands.

It is more profitable (at the price) Boxing is not in the store, but on the flea market, with hands. Shopping guarantee still do not need - we will analyze the box to the screw and a little improve the design.

Why do we choose SATA? This is a more relevant, more speedy and less expensive connection method (for the retro IDE format it is necessary to overpay). In addition, the IDE connector on the DVD drive is completely non-standard, and unnecessary problems for nothing. In general, SATA!

In addition, two pieces of wire are needed (MGTF will go), stationery knife, (nice), one fine crosswater, toothpick, nippers, pliers, soldering iron and necessary accessories for soldering.

Baister!

First you need to pick up the disk box and remove from there an adapter card with USB on SATA. Each model disassembled in different ways, the general tips here will not be lad. We need only a fee, the rest can be thrown away.

The main problem in power connectors. In Sidyukov, for some reason they did shorter and with another pinout. Although in laptop disks of the line in 12V and 3B are not used. In general, we will make food ourselves. Here is the diagram of power connector for optical drive and hard disk.

Now we will deal with the refinement of the drive. It must be disassembled to access the board. There is nothing difficult in the disassembly: unscrew the screws (three) on the top cover and remove it.

The fee to which we need to get access is reliably hidden under the disk tray. But, as in conventional large drives, the tray can be pulled out mechanically. To do this on a laptop drive without a muzzle, you need to push the toothpick into the hole slightly right from the emission button. If the decorative muzzle is on the drive, then there is a hole where you need to poke. Although it is likely to be a little already, so instead of the toothpicks have to take a dispersed fine paper clip.

When access to the board is obtained, we will make a refinement with a file. It is necessary to glue in the connector and in the lid a sufficiently large hole so that our adapter from boxing is freely entered. Depending on the accuracy and used tools (I gnawed by books, blindfold and pliers), it should be about it:

Now we take the stationery knife and cut the tracks from the back of the power connector on the drive. For reliability, you can make two cuts to cut a whole strip and probably get a contact. We do this because the pinout of the SATA-HDD power connector and SATA-DVD is different. Below is evident that the tracks are cut: Compare with the contacts of the SATA data connector (left)

Power We will give individual wires according to the pinout of both connectors (we need one GND and one + 5V). By the way, if you want, you can add a connector connection to the wires to turn off the drive from the board at all.

This is how the external DVD drive is obtained from which Windows can be installed in case of malfunctions. And no dancing with flash drives. True, the soldering iron in the hands should be able to keep. For whom it is not a problem, he saves.

Need to make a USB-DVD drive even cheaper and without a soldering iron?

Thanks to the Chinese brothers! On Aliexpress you can buy

Probably, some more time ago, such a device, like external drives, it would be a lot of pushing the computer. After all, it is often the fact of the very presence of a CD disk drive inside the PC body automatically made this device "elite": not everyone could afford it.

However, time did not stand in place. Pretty soon drives for laser disks have become ordinary. And then appeared on the scene and external drives.

Exterior drive - what it is

Probably, without any definitions, many are clear that the external drive is a compact device designed to work (read and write) from all kinds of discs that connects to a computer through one of its ports.

The external device is called precisely because it is not inside the system unit, but outside. That is, an external drive can be simply taken and disconnect at any time, connect to another computer or disk drive, pick up on the road or somewhere else.

When the external drive may need

There is a lot of situations when such a drive may be needed, or even at all - without it can not do.

For example, for a netbook. In favor of compactness, netbook manufacturers did not put the drive for laser disks into the case. So the user has lost opportunities to work with such disks. And it would be quite bad if it were not for an external CD drive. It just connects to the device via USB port - and you can start working with laser disks. Therefore, the external drives are most often purchased in a pair with a netbook.

The external drive may also be needed in the event that the main drive on the device has failed. Or if you need to quickly rewrite information from one laser disk to another without pre-transferring data to the hard disk (many at the same time will certainly recall the common two-channel once).

In a word, all sorts of situations, when an external drive for a computer may need, simply not to count.

What are external drives

External drives can be classified differently: depending on the connection port, from the possibility or inability to record, by the method of nutrition, by type of readable discs and on other features.

However, most often external drives are divided into:

• CD drives - those that can read and record only CD-blanks (they are currently practically not found);
• DVD drives - the most common type of disc drives, which "sees" both CD and DVD;
• Blu-ray - respectively, other than CD and DVD, such devices can work with Blu-Ray disks;
• writing and not writing - those that can not only read, but also write information to the disk, or only read (the latter are also practically not used today);
• signable via USB and through an external power supply.

Are there any models for laptops or only for desktop PCs? No, there are no such. External drives are universal, they are equally successfully operating on netbooks, and on laptops, and in a pair with a stationary computer.

Pluses of external drives

Of course, the external drive has a number of advantages both the independent device and in front of its built-in "colleague".

• External devices for working with discs can be simply disabled from the computer at any time and, for example, to give a friend. In order to make such a trick with a built-in drive, you will need to disassemble the system unit or the laptop housing.
• The external drive will help if the main drive broke on the device.
• It will help to work with disks even on those devices where such drives are simply not designable. For example, recently appeared disks external for tablets.
• External drives are compact and easy to connect, it is easy to replace them.

Cons external drives

But, as always, it was not without minus:

• Speed \u200b\u200bis the main weak place of any external drive. No matter how cool, and the USB port is still slower than internal system ports.
• Often an external drive for a laptop requires individual power supply. Moreover, it can be carried out both through USB and through a conventional outlet. The poor-quality food blocks are quickly burning, find the other exactly the same is practically not possible - it is easier to simply buy another drive.
• External drive is more expensive than its built-in fellow.

How to connect external drive

Fortunately, there is nothing complicated in how to connect an external drive. Usually, everything that is required is to insert the USB cord into the appropriate connector on the computer, and the power supply plug is in the outlet.

If necessary, you can still install additional software and drivers. But often it can not be done - the system simply recognizes the device as a new drive and it works well with it using regular means.

How to choose a removable drive

When choosing an external drive, you need to take into account the following points:

• If the computer has a USB port 2.0, then you need to acquire such a drive. The reading and recording process will go much cheerful.
• If there is an opportunity, then you need to prefer a power model from both USB and outlet. If the power supply unit is burning, the device can be fed directly from the computer. In addition, such external drives will allow and offline. For example, on the road with a netbook.
• If possible, the drive must read the majority of common disk formats and record them. In the please of universality, you can neglect other secondary functions, which most often use only a couple of times for all the time and then only from curiosity.
• The appearance of the drive also has a certain role. The beautiful device stylishly looks on the table and will attract a lot of curious looks.
• As for speed, there is no need to purchase the highest-speed. Standard 52 speeds are enough "for the eyes" for all occasions. Especially since the record at high speeds is incorrectly incorrect. Yes, and the motor motor itself can quickly fail if it is abused too often work on increased revs.

Regarding the manufacturer - there are no unequivocal recommendations. In principle, all companies today produce well-free external drives. Each company has both successful and not too models. But frankly bad today will not meet.

fB.ru.

Connect DVD drive from laptop to PC

Print recording

I have been lying around for a long time SATA DVD drive from a laptop so as not to dust, I decided to apply it somehow, namely - connect to your home PC. With the connection of SATA, the "sink drives is easier than IDE" socks. But the IDE drives can be connected to a PC, only there is hemorrhading to connect a double-row connector.

Drive photo:

Laptop drives work from 5 volts ...

Left power connector, right SATA connector

Open the drive and connect the wires as indicated in the figure below, the plus and minus conclusions may be paired (duplicated) i.e. May have two contacts.

Connect cables to a computer and check the drive performance

It seems everything works!

meandr.org.

How to connect a hard drive from a laptop to a laptop with your own hands

Good day!

I think who often works for a laptop, sometimes got into a similar situation: you need to copy many files with hard disk Laptop on a hard disk of a stationary computer. How to do it?

Option 1. Just connect the laptop and computer to and transfer files. True, if the speed you have on the network will not be high, then this method takes a lot of time (especially if you need to copy several hundred gigabytes).

Option 2. Remove the hard drive (HDD) from the laptop and then connect it to the computer. All information from HDD can be copied very quickly (from the minuses: you need to spend 5-10 minutes for connecting time).

Option 3. Buy a special "container" (box) in which you can insert hDD laptopAnd then this box is connected to a USB port of any PC or another laptop.

Consider in more detail the last pair of options ...

1) Connecting a hard disk (HDD 2.5 inches) from a laptop to a computer

Well, the first thing you need to do is to get a hard disk from the laptop housing (most likely you need a screwdriver depends on your device model).

You must first de-energize the laptop and then remove the battery (the green arrow in the photo below). Yellow arrows in the photo marked the fastening of the cover, followed by a hard disk.

Notebook Acer Aspire..

After remove the lid - remove the hard drive from the laptop housing (see the green arrow in the photo below).

Acer Aspire Laptop: Western Digital Blue 500 GB Hard Drive.

IDE - old interface for connections hard disk. Provides connection speed at 133 MB / s. Now it is still less common, I think in this article there is no sense in this article ...

Hard disk with IDE interface.

SATA I, II, III - a new HDD connection interface (provides speed 150, 300, 600 MB / s, respectively). The main points associated with SATA, from the point of view of the usual user:

There are no jumpers that were earlier on the IDE (which means the hard disk cannot be "incorrectly" to connect);

Higher speed;

Full compatibility different versions SATA: You can not be afraid of conflicts of different equipment, the disk will work on any PC, through which version of SATA it would not be connected.

HDD Seagate. Barracuda 2 TB with SATA III support.

So, in the modern system unit, the drive and hard disk must be connected via the SATA interface. For example, in my example, I decided to connect the hard disk of the laptop instead of CD-ROM.

System unit. You can connect a hard drive from a laptop, for example, instead of a drive (CD-ROM).

Actually, it remains only to turn off the wires from the drive and connect the HDD laptop to them. Then tritely enable your computer and copy all the necessary information.

Connected HDD 2.5 to Computer ...

In the photo below, it can be noted that the disc is now displayed in "My Computer" - i.e. You can work with him as a conventional local disk (I apologize for the tautology).

Connected HDD 2.5 inches from a laptop is displayed in "My Computer" as the most common local disk.

By the way, if you want to leave the disk connected constantly to the PC - then it must be fixed. To do this, it is best to use special "sled" that allow 2.5 inches to fix wheels (from laptops; less in size compared to computer 3.5 inches) in compartments from ordinary HDD. The photo below shows such "sled".

Salazzas with 2.5 at 3.5 (metal).

2) Boxing (Box) for connecting the HDD laptop to any USB device

For users who do not want to "mess around" with dragging discs there and here, or, for example, they want to get a portable and convenient external disk (from the remaining old disk of the laptop) - there are special devices on the market - "boxes" (Box).

What he really is? A small container, slightly more than the size of the hard disk. In it, as a rule, there are 1-2 uSB ports To connect to PC ports (or laptop). Boxing can be opened: the HDD is inserted into the inside and is fixed there. Some models, by the way, are equipped with a power supply.

Actually, all, after connecting the disk to boxing, it closes and then it can be used with boxing, as if it were usual outdoor hard disk! The photo below shows such a Boxing of the "Orico" brand. It looks almost no different from external HDD.

Boxing for connecting 2.5 inches discs.

If you look from the back on this box - then there is a lid, and behind it a special "pocket", where the hard disk is inserted. Similar devices Pretty simple and very comfortable.

View from the inside: pocket for insertion hDD disk 2.5 inches.

About IDE discs speak, probably, it makes no sense. Honestly, I have not worked with them, I don't think that someone else actively uses them. I will be grateful if someone adds on this topic ...

All good hDD works!

Social buttons.