Send mms from nokia lumia. How to set up MMS on your device: a few steps. Set up MMS on iPhone

Operator Velkom Belarus automatic installation goes only to the Internet, MMS settings must be entered manually. Please tell me who faced such a problem where to enter operator data. You can use the example of other operators When buying a new phone based on Windows Phone, many people have a problem setting up MMS on Windows Phone, but not everything is as complicated as it seems, everything is very easy. At first, you will probably crawl through all the settings of your phone, but you will not find MMS-message settings anywhere, except for the standard ones: delivery report, message merging, and so on. Windows Phones have a little problem, because there is only one access point in the Internet settings, and all operators use two access points: one for the Internet and the second for MMS messages. And how to be here? You ask... The answer is: you need to go to the Marketplace from your phone and download the \"Network settings\" application, which will do everything for you and MMS messages will start working! You can read more detailed information about the article \"Configuring MMS on Windows Phone\" in the full version of our review below.
So, let's start setting up MMS on Windows Phone. You can use various MMS setup applications for setup, such as Nokia Network Setup by Nokia or Diagnostic, "Network setup" in the Marketplace. Try to install only one application and make all the settings there by simply launching this application. The best application in my opinion is still the "Network Settings" program, you just need to install and run it.

Well, if nothing helped, then try the method below: You need to turn off the phone, then remove the SIM card, do a hard reset of the phone, for this you need to go to the Phone settings and there go to the system page and select "Device information", and press the button " Reset". It's best to back up your phone before resetting.

Because all data and settings will be deleted, save everything to Zune on your computer. Then you need to turn off the phone and insert the SIM card and then turn on the phone again, after that everything should automatically configure and connect without any settings. Then it's better not to download the settings from Zune, because they saved the wrong settings data.

Below I will give an example of MMS settings for Nokia lumia 920 and Nokia Lumia 820 phones, since they have to be entered manually! I publish the settings as needed, since it’s impossible to write all of them at once ...

Beeline Russia (the settings are the same for everyone, I checked them in different regions, they are the same everywhere). Please check the data that must be entered in the item \"Data transfer\", and then \"MMC access point\":

Access point: mms.beeline.ru
- username: beeline
- password: beeline
- WAP Gateway: 192.168.94.23
- WAP gateway port: 8080
- MMS Center: http://mms/
- IP type: IPv4v6

No other settings need to be touched. After changing the settings, I recommend turning off and on the phone for the settings to take effect.

So, let's start setting up MMS on Windows Phone. You can use various MMS setup applications for setup, such as Nokia Network Setup by Nokia or Diagnostic, " " in the Marketplace. Try to install only one application and make all the settings there by simply launching this application. The best application in my opinion is still the "Network Settings" program, you just need to install and run it.

Well, if nothing helped, then try the method below: You need to turn off the phone, then remove the SIM card, do a hard reset of the phone, for this you need to go to the Phone settings and there go to the system page and select "Device information", and press the button " Reset". It's best to back up your phone before resetting.

Because all data and settings will be deleted, save everything to Zune on your computer. Then you need to turn off the phone and insert the SIM card and then turn on the phone again, after that everything should automatically configure and connect without any settings. Then it's better not to download the settings from Zune, because they saved the wrong settings data.


Below I will give an example of MMS settings for Nokia lumia 920 and Nokia Lumia 820 phones, since they have to be entered manually! I publish the settings as needed, since it’s impossible to write all of them at once ...

Beeline Russia

Access point: mms.beeline.ru
- username: beeline
- password: beeline
- WAP Gateway: 192.168.94.23
- WAP gateway port: 8080
- MMS Center: http://mms/
- IP type: IPv4v6

MegaFon Russia (the settings are the same for everyone, I checked them in different regions, they are the same everywhere)

Hotspot: mms
- username: mms
- password: mms
- WAP Gateway: 10.10.10.10
- WAP gateway port: 8080
- MMS Center: http://mmsc/
- MMS center port: 8002
- IP type: IPv4v6

No other settings need to be touched. After changing the settings, I recommend turning off and on the phone for the settings to take effect. You can also use the MegaLaboratory website, which has settings for all devices.

MTS Russia (the settings are the same for everyone, I checked them in different regions, they are the same everywhere). Please check the data that must be entered in the item "Data transfer", and then "MMC access point":

Access point: mms.spb (here we indicate our access point, for the region)
- username: mts
- password: mts
- WAP Gateway: 192.168.192.192
- WAP gateway port: 8080
- MMS Center: http://mmsc/
- MMS center port: 8080
- IP type: IPv4v6

No other settings need to be touched. After changing the settings, I recommend turning off and on the phone for the settings to take effect.

Tele2 Russia (the settings are the same for everyone, I checked them in different regions, they are the same everywhere). Please check the data that must be entered in the item "Data transfer", and then "MMC access point":

Access point: mms.tele2.ru


- WAP gateway: 193.12.40.65
- WAP gateway port: 8080
- MMS-center: mmsc.tele2.ru
- MMS center port: 8080
- IP type: IPv4v6

No other settings need to be touched. After changing the settings, I recommend turning off and on the phone for the settings to take effect.

Baikalwestcom Irkutsk. Please check the data that must be entered in the item "Data transfer", and then "MMC access point":

Access point: mms.bwc.ru
- username: bwc
- password: bwc
- WAP gateway: 10.10.17.2
- WAP gateway port: 9201
- MMS Center: http://mmsc/
- MMS center port: 8080
- IP type: IPv4v6

No other settings need to be touched. After changing the settings, I recommend turning off and on the phone for the settings to take effect.

MTS Ukraine. Please check the data that must be entered in the item "Data transfer", and then "MMC access point":

Access point: mms.umc.ua
- username: Not required, leave blank
- Password: Not required, leave blank
- WAP Gateway: 192.168.10.10
- WAP gateway port: 8080
- MMS Center: http://mmsc/
- MMS center port: 8080
- IP type: IPv4v6

No other settings need to be touched. After changing the settings, I recommend turning off and on the phone for the settings to take effect.

In the vast majority of cases, when a new SIM card is installed, the smartphone automatically receives MMS and mobile Internet settings. But sometimes failures can occur, as a result of which the user has to manually set the desired parameters. In this article, we will tell you how to set up MMS on Android.

To open MMC settings, follow these steps:

Step 1. Launch the application Settings and select the " SIM cards and mobile networks».

Step 2. Select the SIM card for which you want to set up MMS.

Step 3. Click the button Access points».

Step 4. Select an access point for MMS and in the next window set the parameters necessary for the correct reception and sending of multimedia messages.

MMS hotspot settings vary between mobile operators. To save your time, we have collected links to the corresponding MMS settings for gadgets running Android from the largest providers in Russia and neighboring countries:

How to send mms from android

Previously (on feature phones), in order to send MMS, you had to select the appropriate option in the message menu. In modern smartphones, everything is much simpler: just attach, for example, a photo to a text message so that it is automatically converted into a multimedia message. It also works the other way around - by deleting all multimedia files from the created MMS, you will turn it into an SMS message.

Conclusion

Setting up MMS on Android is very simple - just follow this guide - and in a couple of minutes you will be able to send and receive multimedia messages on your smartphone.

The "MMS" function is supported by many modern phone models. The ability to send multimedia messages allows mobile phone users to share with each other their impressions of a vacation, a walk, to wish a good mood along with a beautiful melody or an interesting picture. This function is actively used today by those subscribers who own old models of cell phones. Also, multimedia messages are convenient when it is not possible to use more modern methods of information transfer - Wi-Fi and WhatsApp.

The question of how to set up MMS is asked by subscribers of all existing operators. The system for setting up the function of sending multimedia messages is approximately the same for all operators. In order to be sure that the function will become available and can be used, it is necessary to perform all possible settings, which include the following three steps:

  • Step 1 - you need to activate the service;
  • Step 2 - set up an account;
  • Step 3 - Check phone settings manually.

Consider the features of connecting the service and setting up an account within each mobile network. Step 3, which includes setting up the device manually, will be considered separately - it does not depend on the operator.

Set up MMS on Tele2

The question of how to set up MMS on Tele2 will be resolved after you choose any of the methods listed below:

After performing the necessary actions, the service will be connected, and the account settings will be activated.

Setting up MMS on MTS

It is also possible for MTS users to set up MMS automatically. In order to activate the service and activate the necessary settings, you need to choose the method that is most suitable and convenient for you:

  1. Make a call to 0876.
  2. Send a free message with the text "MMS" to 1234.
  3. Dial the command *111*18#.
  4. Use an assistant.

The settings received in the SMS message must be saved on your device.

Set up MMS on Beeline

The question of how to set up MMS on a phone operated by BeeLine is solved in very simple and quick ways: The 1st method is to connect a service called "Three Services Package", which includes WAP / GPRS / MMS. You can do this by dialing *110*181# and the call key on your phone. Thus, you will activate the service and activate the account settings. 2nd way - activate the service in your personal account.

Set up MMS on Megaphone

Megafon has provided subscribers with ample opportunities to manage their phone settings.

Therefore, the question of how to set up MMS on a phone with a Megafon SIM card is not a problem. Choose the method that is most convenient for you:

  • Send an SMS with the number 3 to 5049.
  • Use the self-government service *105#, where then send a request 6 (Settings) - then 1 (Phone settings) - and 1 (MMS).
  • Order settings on the company's website.

Setting up your phone manually

This step must be completed in order to no longer hesitate and be sure that multimedia messages will be sent without any extra hitches from your phone. It consists of several actions:

  1. In the phone menu, find the “Settings” (“Options”) tab, then “Configuration”.
  2. Check the configuration settings for MMS messages:
  • access point in Tele2 - mms.tele2.ru, in MTS - mms.mts.ru, in Beeline - mms.beeline.ru, in Megafon - mms;
  • the username in MTS and Beeline is the name of the company in small Latin letters, in Tele2 it is absent, in Megafon it is mms;
  • the password in MTS and Beeline is the same as in the username, in Tele2 it is absent, in Megafon it is mms;
  • Authentication type - select the "normal" value.

Next steps:

  1. Enable the new account as the default account.
  2. Reboot your device.
  3. To register your number on the network as an MMS user, you must send a multimedia message to your phone after turning on the phone

Set up MMS on iPhone

The question of how to set up MMS on iPhone can be solved by following a few manual steps.

1. Order a service:

  • MegaFon operator - send an SMS with the text "gprs" to the number 000890;
  • Beeline operator - make a call to the number 067409181;
  • MTS operator - send an SMS with the text "GPRS ON" to the short number 0016;
  • Tele2 operator - make a call to the free number 693.

2. Connect your device to a PC that has Internet access and iTunes is running. Agree to the "Download updated settings" prompt. If there is no offer, it means that the service is configured or the operator does not support it.

3. In the phone menu, open the "Settings" tab, then go to "General", select "Network", go to the "Cellular network" menu.

  1. Enter the required values:
  • Access point (APN): MTS operator - mms.mts.ru, Beeline - mms.beeline.ru, Tele2 - mms.tele2.ru, Megafon - mms.
  • The username in Beeline and MTS is the name of the company in small Latin letters, there is no Megafon and Tele2.
  • Password - similar to username.
  • MMSC: Tele2 operator - http://mmsc:tele2.ru, Beeline, MTS, Megafon.
  • MMS proxy: Beeline operator - 192.168.94.23:8080, Megafon - 10.10.10.10:8080, MTS - 192.168.192.192:8080, Tele2 - 193.12.40.65:8080.
  • The maximum size is 512000.

Here is the MMS setup on your device. Use the service with pleasure!

What is Multimedia Messaging Service (MMS)?

MMS is a mobile messaging service standardized by the WAP Forum and the 3D Generation Partnership Program (3GPP). MMS is very similar to Short Messaging Service (SMS). It provides instant automatic sending of user-created messages from phone to phone. But for SMS, a phone number is specified as the address, and MMS allows you to specify an e-mail address as well. Therefore, messages can be sent from phone to email and vice versa. In addition to the usual SMS text content, MMS can contain photos, video and audio clips. Another advantage of MMS is that the message is a multimedia presentation, not just text with attachments. In addition, MMS is independent of transport type and is not limited to GSM and WCDMA networks.

Is MMS a Nokia proprietary service or is it a standardized service?

The WAP Forum and 3GPP have certified MMS as an open standard. The 3GPP specification defines the network architecture and general functions. The WAP Forum specification defines the message format and application protocols. Existing protocols are used to deliver messages.

Does MMS require network changes?

MMS is mainly used as a means of exchanging messages between phones. There is always a possibility that a message cannot be delivered because the recipient's phone is turned off, the battery is low, or they are out of coverage. A new network element, the MMS Service Center (MMSC), is needed to store undelivered MMS messages until the recipient's phone is available. In addition to this, MMSC has many interfaces for connecting to networks, as well as APIs for providing additional services and networking with e-mail. Nokia and some other vendors make MMSC.

What types of content does MMS support?

The MMS standard does not describe any content formats. Instead, MMS encapsulates the content in messages in a standard way, and the recipient can identify the content formats and work with those that it supports. The same solution is used to work with various types of content on the Internet. Despite this, the standard recommends implementing support for JPEG, GIF, text, AMR Voice, H263 and others. To achieve compatibility, Nokia and some other manufacturers have entered into an agreement called the MMS Conformance Document, which describes the minimum set of data formats supported by an MMS phone.

How big can an MMS message be?

The standard does not define a maximum size for an MMS message. This is done in order to gain confidence in the scalability of the technology in the future and to avoid the problem that arose with SMS, where the maximum length of 160 characters was not enough. Therefore, the maximum message size depends on the specific MMS implementation. It also depends on the preferences of the operator, who can set a fixed message size for the convenience of their own billing system. Nokia believes that at first the message size will be in the range of 30 to 100 kilobytes.

How fast is the transfer of MMS messages?

The transmission speed of MMS messages depends on the size of the message and on the type of transport used. But, since the addressee is only notified of the arrival of a new message when it is fully delivered, he does not experience any delay anyway.

Can I send MMS to a phone that does not support MMS messaging?

Nokia MMS solutions provide support for phones not equipped with MMS functionality. If the recipient's phone is determined to be unable to work with MMS, the message is stored on a web page, and an SMS message is sent to the recipient with the address of this page.

Can I send MMS to phones equipped with monochrome displays?

Color images make up a significant part of MMS content. In order to fully enjoy the possibilities of MMS, a color display is required. But, in theory, any phone equipped with the MMS function can receive MMS messages. There are several ways to display color images on black and white displays, and you can get a limited understanding of a color image by viewing it on a black and white display.

Is MMS a WAP application?

MMS does not use the WAP browser. MMS is a messaging application, not a browser. This technology uses its own user interface (just like SMS).