Htc wildfire s firmware 4. Flashing the HTC Wildfire S smartphone through a computer. How to get Root using Kingo Root on a smartphone

You can flash HTC Wildfire S with two accessible ways, the first of which is flashing the phone through a computer, the second - through a memory card. You should decide which method will be the most convenient, and only after that you can start the process, strictly following the instructions.

Flashing the HTC Wildfire S smartphone through a computer

First you need to find, select and download a version from the Internet required firmware in RUU format. After that, you need to download and install the HTCDriver driver on your computer. If HTC Sync is already installed on your computer, then the system has a driver, and you do not need to reinstall it.

You need to enable debugging mode on your phone (settings, applications, development, usb debugging), unload HTC Sync and connect your phone to the computer in charging mode. This is followed by the second stage of the task of how to reflash HTC Wildfire S.

On the computer, you need to run the exe file containing the selected firmware, agreeing with all the warnings that popped up. The program will determine the model this phone for the possibility of flashing and updating it software, after which it will show the current version and the new version of the software.

All information will be displayed on the computer screen. Android HTC Wildfire S, and below are the versions of the current phone software and the proposed new look. You need to start the flashing program by clicking on the "Next" button and wait about 10 minutes. Ready! A new version The software is installed on the device!

Firmware via memory card

To flash the phone using the option described below, you need to find and download from the Internet a ready-made archive of one of the suitable versions, designed to flash the device from a memory card.

If it was not possible to find the archive with the required version of htc wildfire s flashing, then you should find the firmware version in RUU format, as in the first option. After that, you will need to run the exe file containing the selected firmware version.

A welcome window will open on the monitor screen. desired program. Without closing this window, you need to start searching for the rom.zip file, which should be located in one of the temporary folders where the installed firmware version was unpacked.

After discovery desired file you will need to rename it to PG76IMG.zip and then transfer the copy given file to the root of the smartphone's memory card. After that, the window on the computer screen can be closed.

Next, you need to reboot HTC Wildfire S into the bootloader. To do this, turn off the device, remove the battery, and then return it to its place. After that, while holding the "volume rocker" button, you need to press the power button.

As a result, the HBOOT shell will appear on the screen. The phone will automatically detect the update and check for it. When finishing the flashing process, you need to click VolUp, agreeing with the update, and wait for the process to complete. In this case, you should observe the status bar in the upper right corner of the display, and at the end of the work, restart the phone again. It is advisable to delete the PG76IMG.zip file from its memory card after flashing the phone.

Today we will deal with the firmware HTC phone Wildfire S on Android newer versions. Today we will install the firmware on the example of Android Ice Cream Sandwich 4.0, but if you wish, you can upgrade to Jellybean (4.1). I hope this step-by-step instruction will not cause any difficulties on your part.

HTC Wildfire S firmware- step-by-step instruction

  1. If you are not HTC yet, then I ask you to do this first to get Root rights.
  2. Go to the XDA-developers forum and download the file one root 1.5 for Windows. If you have a Mac, download the link below.

  1. Next, unpack the archive, go to the folder and open the one click.bat file. A window will open in which we simply press any key and wait 30 seconds.
  2. The next step to flash our HTC Wildfire S is to get the custom firmware itself. We turn to the same hda-developers in a special theme with firmware.
  3. As I said, we will be installing firmware 4.0 for a smartphone as an example. So, I download the file: MIUI v4 - 2.4.2. Click here and scroll down to this post and click "Download": (Until recently, the download links from XDA were working - who could not download the firmware from the site - download here: Wildfire S MIUI firmware with Russian language support)

  1. Once you have downloaded the firmware, the next step is to upload it to the Wildfire S via USB without unpacking (!) it.
  2. (Important!) If you bet cyanogenmod firmware any version you need: be sure (!) Download (http://www.teamandroid.com/gapps/) and upload again without unpacking (!) GApps (for each android version own (select-download)) to the SD card, and before installing the firmware via Recovery, you must click install zip from sdcard -> choose zip from sdcard -> We are looking for the downloaded GApps -> install. So that it doesn’t happen later that the firmware is installed, but after a reboot it takes a long time to load and does not load in the end, so it can take 24 hours and nothing will load. How I was! - I pass thanks to Pavel Filippov for such a decision. It is also worth noting that the guy 2012 Wildfire S phone release, stitched successfully!
  3. Then we take our phone - turn it off - hold down the volume buttons (decrease) and the power button until the bootloader menu appears.
  4. We choose Recovery and wait a bit.
  5. (Important!) In the new menu, go to the following items: backup and restore -> backup. A folder with a backup of your system will be created on the memory card. I think it will not hurt if suddenly the firmware installation fails. It can also be downloaded to a PC and stored just in case. For a backup, you need about 500 MB of free space, so save up in advance. Restoring the system goes through the choice of such items: backup and restore -> restore -> choosing an archive with the old system.
  6. The backup is done, the next step is clearing the cache. To do this, go to: wipe data / factory reset- wipe cache partition -> Go to Mounth and storage -> format / data - format / cache - format / system.
  7. We go back (Go back), select Advanced -> wipe dalvik cache. Now everything is ready for installation firmware for HTC wildfire S.
  8. In the menu, select - install zip from sdcard -> choose zip from sdcard -> We are looking for the downloaded firmware -> install. At the very end when new system will be installed will be written "Install from sdcard complete".
  9. By pressing the on / off button of the phone, going to the main recovery menu, where we select the reboot system now item.
  10. The first boot of HTC will take long time, up to 15 minutes, maybe more. That's all.

It turned out to be a free day and I decided to do something with my spark. Some stars also agreed: the animal began to behave slow, and the notorious struggle for every kilobyte had already begun to infuriate me. After digging through hundreds of pages about updating Wildfire and moving to unofficial firmware, I offer my own way to overcome this problem.

Why all this? Well, firstly, you will get a device completely under your control: I immediately made a small overclocking of the processor and freed up a lot of space. And secondly, the next action removed all the stock programs I didn’t need, like: facebook, google maps and others like them. The only negative is that I had to do a full wipe, i.e. Erase all data on the device.

Before starting, I was a little scared, but the experience with devices on Windows Mobile did not go to waste. And I was rewarded. So, if you still haven't changed your mind, then see the warning and read on.

A warning

Carrying out the procedures below, each of you must understand that he is doing this voluntarily, of his own free will and a sober decision, because installing custom recovery and root rights supplements your agreement to waive the warranty when unlocking the bootloader, making it a complete conscious waiver of the manufacturer's warranty .

And here is the step-by-step instruction for unlocking and flashing itself:

1. Before doing anything, you need to find out the version of HBOOT

As they say, cleaning the machine should be done only after checking the number - is it yours). The utility works only on loaders 1.08.0099 and 1.09.0099. For this:

Disable (if enabled) option fast loading Menu → Settings → Nutrition →

Turn off the phone and boot into fastboot ( VolDown +power )

You will see something like this on a white background:

MARVEL PVT SHIP S-ON RL

HBOOT-1.09.0099 ← this is the bootloader version (HBOOT)!

RADIO-7.57.39.10M

4. Put the device into charging mode with debugging enabled

Settings → Applications → Development → USB Debugging

5. Run the file Wildfiresutility.bat from unzipped folder

You will see a utility window asking you to enter the number of the required operation:

1 - unlock bootloader without registering in htcdev.com

2 - installing CWM Recovery (unfortunately poltergeist devices 2012 are still in the "span")

3 — root installation rights, through the installed CWM Recovery

4 - locking the bootloader (Locked) and getting a Super version (downgrading) to install any versions stock firmware. This allows you to get rid of the message "main versoin is older" after FOTA tricks or just to install older builds. They will allow you to return the device to the “Out of the box” state.

6. Do all actions sequentially:

1. First unlock bootloader . ATTENTION!!! The device will be rebooted several times into the stock Recovery (exclamation mark in a triangle on a black background), which will be reported in command line. Do not panic, press VolumeUp → get into the stock recovery menu → select reboot with the volume buttons → confirm with the Power button. We are waiting for a message about the successful completion of the procedure: Your phone should now say UNLOCKED. Open and drink 1st Beer.

2. If step 1 is successful (the message ***UNLOCKED*** will be displayed in the topmost line of the bootloader), then install CWM Recovery(if you don’t know what it is and why don’t bother yourself, but if you are inquisitive, then you here). At this step, I had a problem - I didn’t want to install this very recovery. If the plug also came out, do not panic. Download archive from CWM Recovery 5.0.2.8 Unzip to the root of the disk FROM:\ and run recovery.bat

3. The next step is to set root rights. And again, with the help of the HTC Wildfire Utility, I did not succeed. As unlucky as me download SuperUser 3.0.7 We transfer this file to the USB flash drive of the communicator. After that, we reboot and go into our bootloader (VolDown + Power), use the volume rocker to go to the item recovery, and by pressing the power button we go to CWM Recovery. There we select the item install zip from sdcard, Then choose zip from sdcard and select the downloaded file on the flash drive.

4. Personally, after all the above actions, I needed to do a full wipe - restore the factory settings. But this is a matter of chance...

5. Did you wipe or not, but compulsory is the creation of primary backup systems: Turn off the phone. And turn it on by pressing the VolDown + Power buttons. We go into Fastboot, select Recovery, we get into the CWM Recovery menu. We go with the volume rocker in the menu backup and restore and choose backup . CWM Recovery creates a backup of your system on a memory card in a directory like clockworkmod/backup/2012-01-06.16.57.32. Renaming this directory is highly discouraged! To place the directory, you need ~ 500MB of free space. If necessary, it can be transferred and stored on a computer while maintaining the folder architecture.

This detailed instruction is for all owners of the HTC Wildfire and Wildfire S smartphones who need to get root rights in a couple of minutes!

For those who have just become a beginner or are not an expert in a huge Android world and not familiar with the concept of how - root android , and also why it is needed, what can be done after obtaining Root rights or how to get rid of them later if they are no longer needed, all this can be found in the article - root Android!

First of all!

There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! Now let's start getting Root rights!

What is needed to get Root with Kingo Root?

  1. Computer (OS Windows XP/Vista/7);
  2. Original, undamaged MicroUSB cable;
  3. Download and install the site's proprietary program - ADB RUN;
  4. Download and install the HTC driver;
  5. Enable USB debugging on Android;
  6. Download custom Recovery for your HTC Wildfire S model
  7. Download update archive UPDATE-SuperSU.zip to get Root rights.

How to get Root using Kingo Root on a smartphone

HTC Wildfire and Wildfire S

Method number 1

1. Connect HTC smartphone Wildfire and Wildfire S to computer

2. Run the program Kingo Root

3. Press the button in the program interface ROOT

4. Don't Pull USB cable until the program notifies that Root rights received

5. After a couple of minutes, Root rights to the HTC Wildfire or Wildfire S smartphone are obtained

Method number 2

1. Archive update UPDATER-SuperSU.zip(without unpacking, in its original form) move to the root of the memory card or smartphone memory;

2. Switch your HTC Wildfire S smartphone to Fastboot mode:

Option 1 (log into bootloader)

Turn off the smartphone and hold down the Volume Down and ON / OFF button

Option 2(enter bootloader)

Connect HTC Wildfire S to your computer, run the ADB RUN program and go to and select Reboot Device -> Reboot Bootloader from the menu

Option 1 (how to flash CWM Recovery)

Run Adb RUN program and go to menu Fastboot ->Recovery, put the downloaded file xxxxxxx .img(instead of xxxxxx file name) in the opened window, close it, after which the smartphone will be flashed and press Enter

Option 2(how to flash CWM Recovery)

  • File xxxxxxx .img(instead of xxxxxx file name) move to C:/adb/progbin
  • put smartphone into bootloader mode
  • In a programme adb run go to menu Manual -> ADB
  • write command fastboot flash recovery xxxxxxx.img (instead of xxxxxx file name)


If you get a message on the command line:

fastboot

a) You may not have the driver installed or you need to reinstall it

b) The smartphone is not in bootloader mode and it is worth rebooting the smartphone again

4. Transfer smartphone to recovery mode(translate bootloader ->bootloader ->recovery)

5. Install this update archive UPDATE-SuperSU.zip from the Recovery menu;

6. Reboot smartphone. Root rights received!

Get S-OFF on HTC

If you have a question about getting Root, then HTC has made great progress in preventing this from happening! Judge for yourself first you need to, on a smartphone and after that you will need to unlock system partition(/system) so that you can replace any files, remove applications, or upgrade. When a partition is writable, it has the status S-ON, when unlocked S-OFF. If you need to get S-OFF on HTC go to the article - Receive

Check for Root Rights

Yes, in principle, if there is a clear detailed instructions each person has the opportunity to figure out and flash a smartphone without contacting specialists.

You need to start flashing any smartphone by finding a suitable operating system. Here the main difficulty is not to find the firmware under specific model, especially since it’s hard to call your smartphone a novelty, but in choosing the one that will best meet all your requirements. Each unofficial, custom operating system has a large number of unique changes and specifications, and since the firmware is, figuratively speaking, a complex organism, its work as a whole depends on these very little things. In order to make the right, balanced choice, you must decide what kind of result you want to get before starting the search. There is nothing complicated about this, at its core, all firmware can be divided into three categories, fast, beautiful and combined. I never use the latter because they do not differ from the official operating systems either in good speed or fundamentally new graphics. Knowing exactly what you want to achieve, you need to carefully read detailed description future OS. For example, if you are primarily interested in the speed of your smartphone, you need to look for firmware in which a new kernel will be installed, memory will be redistributed, elements of the graphical shell will be cut to a minimum, and standard services and installed tweaks to overclock the power of the CPU. Several firmware for htc wildfire s smartphone, I will describe for you below:

  1. "CM9 ICS ONE BY ANSATBAY Final". I liked this operating system for its not flashy graphic design and fairly good speed. Tweaks are preinstalled, thanks to which you can manually increase or decrease the frequency of the processor, optimization is performed to increase the battery life of the device, there are several options for designing icons.
  2. « HCMIUI". Firmware that is ideal for people who pay a lot of attention appearance your smartphone. The standard htc graphical shell has been completely replaced with its own, there are several additional services, the ability to synchronize with the MIUI server, own shop decorations and launchers, most of which are absolutely free, almost all standard applications Google and htc are removed. The disadvantage of this operating system, I can call a large load on RAM devices, resulting in an average of 40 percent free.
  3. « Cyanogen Mod 10.X(OS 4.2)". Unique firmware from worldwide famous developer Cyanogen. It differs from all others in that it was created on the basis of the open source code of the Android operating system, and not on official version. For the htc wildfire s smartphone model, I counted more than 27 different versions, with different functionality and graphical shell. Among the users of the 4dpa portal, a survey was conducted, to choose the best firmware, and this version took the first place by a wide margin. It combines speed, battery savings and new graphics that have nothing to do with Sense. I also consider it necessary to warn you that not all versions of Cyanogen work stably, so it's best to use one of latest versions, available for download at the time of the firmware of your smartphone.