Restore the USB flash drive using Recuva. Recuva is a data recovery program. Options for starting the application and selection of file types

Sometimes it happens that due to careless actions and / or some system failure on a computer or carriers have removed certain data. They are not always possible to quickly restore with "Baskets"Since quite often files are removed without a trace. Most often this problem It is found with flash drives and other media, which from time to time has to format due to failures.

The only chance for the return of lost data is to use third-party programsFor example, Recuva. This program was developed by the same team that created CCleaner. Today Recuva applies to fully free. Consider its functionality and features of use in more detail.

Supported file types

Unfortunately, not all programs whose goal is to search and restore damaged files can be successfully found and processed. In the case of Recuva, this problem is not observed. According to supports almost all common types of files and their types. Among the supported file types:

  • Images;
  • Video;
  • Music;
  • Documentation;
  • Compressed files, such as archives;
  • Emails.


Not to lose much time search and restore unnecessary filesYou can select the type you want to restore the program before you start. If you do not know which type of files you need to restore, you can use the option "All files".

Specifying File Placement

After deleting the file, it falls into "Basket"But if this did not happen, you will have to specify the place in the program interface, where the desired item was still before its removal. The program will provide several options where you need to choose the appropriate:


In-depth analysis

The program supports an in-depth analysis option that allows you to find and restore (at least partially) those files that have been deleted for quite a long time. However, it is disabled by default, since when it is turned on, the scanning time and the overall load on the system are greatly increasing. Before starting the scan procedure, the program will ask you if you need to connect this option during this session. If so, just put a tick on against the desired item.


The possibility of selective recovery

When the program completes the scanning, you can see all the files detected by it. Some of them can be previously viewed. Unfortunately, the names of many elements can be replaced by an incomprehensible combination of characters, which will significantly complicate the selection recovery of files.


Check the ticks opposite those elements that you need to restore and use a special button, which is located in the bottom right side of the window. The recovery process will take some time, which varies depending on the size and type of file, operation speed operating system and computer characteristics.

Advantages and disadvantages Recuva

According to the experience of many users, the program has no significant flaws. The only thing that would like to improve is the time you want to scan and restore files. True, in comparison with RECUVA competitors, it works very quickly.
From " strong Parties»Users users allocate the following:

  • There is a full support for the Russian language. All basic interface elements are translated correctly;
  • The program is able to find almost any file that has been removed even for a very long time. It also copes with the restoration of such files;
  • There is a free version in which it is enough opportunities to restore most user files. In paid versions the possibility is more expanded.

As you can see, Recuva is excellent programintended to restore information on formatted media or the one that has been completely removed from the computer.

Assigning Recuva Program: Restore remote files with search by name or content, restore information with logically damage to volume.

Apply for free.

Description and example of working with the Recuva program

The program is not overloaded with capabilities, so its description is easier to spend together with the demonstration of work. Suppose there is a flash drive with which the files deleted, it itself is in this way. You need remote files to restore.

Run the program. In the drop-down menu, select our media, in this case it is a D disc: with the example of Example.
If you want to search on the contents of the file, if known key phrasewhere you can identify the desired file, then when you click on a black triangle on the right side of the SCAN button in the menu that appears, you need to select Scan Contents.



We do not need to look for content, so we choose Scan Files. Start scanning remote files. Depending on the volume of the carrier, it will take different time. At the end of the search process, its result will be displayed in the main window of the Recuva program.



As a result, we see the names of the files without the first letter (it is replaced by the "_" sign) and the path for which the files are located to their removal. When you select any file in the window to the right, it will show its reduced content if the file format is recognized by the built-in viewer.

To restore the desired files, you need to put the ticks opposite the necessary or if you want to restore everything, then put a tick in the upper check box. Then you need to click the Recover button and select where to save information.

Attention! Never save data to the same disc from which you restore them. Otherwise, the recovered files will be recorded in the location of the files restored, which will result in their irreversible damage.



Even such a small utility, like Recuva, has its own settings - the Options button. Let's see what's there.



General Tab - General Settings
  • Language - program interface language, there is Russian
  • View Mode - Result Output Mode: List (default), tree-shaped (as windows Explorer) and preview
  • SHOWS WIZARD AT STARTUP - Show Visage During Program startup
  • Automatically check the software updates.



Actions tab - actions
  • show files found in hidden system catalogs
  • show zero size files
  • show securely rewritten file
  • deep scan - excluding file System
  • scan not remote files to restore information from damaged or reformatted sections
  • restore the former folder structure.



Tab - Advanced - Options from it are available only in Pro version
  • add the option "Search for remote files" to the context menu of the conductor
  • add option "Search for remote files" in the context menu of the basket
  • save settings to an ini file.

Recuva is a program with which you can restore the computer files that have been deleted from the basket, as well as delete finally files, without the possibility of recovery. This is the most popular program For the purposes of recovery / delete files. In this article, you will learn how to use Recuva, and you can also download this tool below.

In this program, I saw sedental advantages and opportunities:

  • The interface has Russian.
  • This is a conditional free program, but in free version, There is everything you need to work.
  • Scanning and restoring files occurs quickly enough, relatively with the analogues of the program.
  • Works, both with rigid disks of any type and with flash drives.

Instructions how to use Recuva

Before you use Recuva, download this program on the link below and install on your computer. The installation occurs in the usual way.

After installation, run the program. And before starting work, change the language into Russian. To do this, press the "Options" button, select the Russian language in the Language list, click OK, close the program and open again.

Now let's get to restore files. In the list, select Disk or removable mediawhere there were remote files that you want to restore. Then click the "Analysis" button and wait for the operation.

As a result, you will see a list of files that can be restored. Use the scroll bar to get more file information.

Find the file you want to restore. You can use the search form by file name or location path.

Then check the box near the file to be restored. You can select multiple files. When all files are marked, right-click and select the "Restore marked" item. After that, a window will appear in which you want to select a place where recovered files will be saved. Select your location and click "OK".

After the recovery procedure, you will see the result with the statistical. And after that, you can watch, in what condition the files turned out.

Not all files can be restored. Some files are restored unsuccessfully, with loss of quality.

Now you know how to use Recuva to restore remote files. Let's consider the opposite direction - how to delete irrevocably files that have already been removed in the usual way.

For complete removal Make the same actions that were described above, namely:

  • select a disk or removable media;
  • start scanning;
  • mark the files for complete deletion;
  • press the right mouse button;
  • click "reliably delete marked".

A message appears in which you need to confirm your intentions by clicking "Yes."

As a result, you will see a removal report.

Now you know how to use Recuva to restore and delete files. Be careful when working with the program, think about each action. I also recommend learning more details Recuva.

Hello everyone!

It happens very unpleasant when you lose important files. Especially if it was personal photos and video from the sea, graduation, from a wedding, birthday, and so on. That is why it is important to know how to restore deleted files to the shortest possible time !!!

I want every visitor to my site to restore all the files he lost and for this I will write very detailed instructions. I will describe 6 different programswith which you can restore deleted files from a flash drive, memory cards or hard disk!

Recuva.

The first program is called Recuva and in the world of restoring lost files This program is one of the most popular and simple. As always, we need to download it from the official site and install.

Immediately proceed to business.

Insert a USB flash drive to your computer or a memory card with which you want to restore deleted files. If the files need to be restored from a hard disk, you don't need to insert anything.

Run the Recuva program and the first thing now will include Russian. Click the Cancel button in the first window.

The second window is already the main program window, here go to Options.

We find Russian.

Now everything is in Russian and work is already more convenient. We specify the letter of the disk or flash drive, where you need to restore the files and press the analysis.

After a few minutes, the program will show a huge number of files, including those that we need. Here it will immediately need to pay attention to the status of the file.

File can be in Excellent condition, on average, bad or even lost. Well, if you remember the names of lost files. If not, you will need to put ticks opposite the files in Excellent condition, middle and bad. After that, click the Restore button.

We specify the place on the computer where the restored files will be saved and click OK.

Nowadays, in no case save the files there, from where they are restored!

Upon completion, ready-made files can be checked and removed those that recovered with errors.

The main thing is to remember that if you deleted some important files, then in no case you can not write other files on the same drive.! For example, did you accidentally delete several photos from the camera? What to do? First, stop taking pictures. With each new recorded on the memory card, the likelihood of recovering earlier deleted files is reduced!

The following program, with which you can restore deleted files, even if the first program did not help, is called. In some cases it will even be cooler Recuva.

The principle of work is very simple, even though the program is in English. You need to download it, install, run and select the drive from which you want to restore files.

Opening the drive, the program immediately scans it and build a hierarchy of folders, which was before deleting files. You need to open the folder from which we removed files And try to restore them.

Having liked the mouse to each file, we can see its size. To restore it, you need to click on it with the right mouse button and select Recovery item.

Also, you can select all files or even all folders and click Recovery. Now it's small: to specify where the files will be saved. The first item is responsible for saving the file to the hard disk.

And in the second window, specify the disk and the folder in which these files will be saved.

Oh, you can still give the file a new name.

After saving, check the received files.

Another program for scanning and finding lost files is called. A distinctive feature of this program is a very pretty design.

In the main window of the program, we offer to familiarize yourself with the action plan. If there is a free moment, then I advise you to read.

We accept the terms of the agreement and click let's start.

Select a USB flash drive or a disc where you need to find files.

We are waiting for a few minutes while searching for lost files.

Upon completion, we can familiarize yourself with the found information. On the left, open the folders in which the files should have been and on the right will appear. Put ticks on required files and click Restore selected.

It will remain to specify the disk where the files will be saved and upon completion check them.

The following, pretty powerful program can restore deleted files on the computer is called. Wherever you look everywhere speaks about this program.

The principle of operation is similar to previous programs. We need to choose a disk with lost files and click Scan.

Scan Progress is displayed at the bottom of the program.

When it is completed, we will need to choose a disk. Just now click on it right mouse button and select item Restore all files.

We specify the program path to save and click yes.

In some cases, the program will ask to correct the file name. It is usually due to damage to the initial file name. We give a name and click to rename.

The following program is called Ontrack EasyRecover and on the principle of work it is identical to the rest. We are in the first window, just give a description of the program and here you just need to click continue.

In the next window, you need to select the type of drive on which data is being searched.

Well, and most importantly, specify the case of a disk or a flash drive, which you need to try to restore deleted files.

We choose that we specifically need to restore what was removed and confirm the settings.

AND last programwhich we try called.

In the upper left corner, click Start, then Recover Files and Next.

Select the drive letter and Search for Deleted Files item.

Upon completion of the scan, on the left open the folders, and on the right we put the daws on the files you want to restore. Click Save and save at a convenient place on your computer.

How to recover deleted files on android?

As for smartphones, there is a similar situation here. For example, to restore deleted files on android You need to pull the memory card from the phone, then insert it into your computer or laptop and use any of the way it describes to restore lost files.

Which of us did not break the hair after the rapid pressing of the "Delete" button? Probably only one who has never dealt with a computer. Sometimes, months of work and tons of valuable files can go to the pump due to the incorrect movement of the finger. Well, if you have tried immediately - you can help you to restore remote files.

How do data recovery work

The fact is that as well as nature, the file system of the computer does not tolerate emptiness. If you delete a file, then only the file header is removed from the file system, that is, information about its location on the disk. The file is, as it were, but it is no matter how, because it is "without documents." And while something else is written on top of this file, there is an opportunity to restore it in rights. For this and created special programs like Recuva.which we are further and consider.

Installation Recuva.

This program is better to establish before "loss loss" is found, because there is a chance to set the program over lost files. That is, it turns out that the doctor came and sat the patient to the sore. But if the files are already lost (as usual and happens), it remains only to pray that the program is not installed on them.

So, we will turn to the installation Recuva.. Download the archive with the program from the official site Piriform

and remove the folder with the name Recuva.. Go to the folder and run the recuva.exe file. A window appears with a selection of a program language. The default is Russian. If there are no objections, click "OK".

A window appears with a feature from the program:


Press "I accept"confirming that we agree with license Agreement (otherwise the program will not be installed). The next window will propose to create icons for quickly launch Programs and enable automatic check New versions:


Selecting the required flags, click "Install". At the end of the installation, the last window opens with the proposal to start the program after installation. Press "Done"And here, before us is the recovery master:


Work through the recovery master

If you wish, it can be skipped and immediately go to manual recovery, but for the first time, it is still better to use it. Press "Further" And the master asks what type of files are we looking for?

Suppose we are looking for lost photos. Choose "Pictures" and click "Further". New window with a question about the presumptive location of lost files:


As a rule, we remember exactly where they lay (at least approximately). Indicate this place and press again "Further". Now the master is ready to start a search, what he reports to us:


Press "To begin", We observe the search process and result in a list of found files. At the exit, we will succeed like something like this (although, depending on the settings, maybe in the form of a list, as in the photo below):


Here part of the pictures will be replaced by the inscription "View Unavailable". This means that some kind was already recorded on top of them. new informationAnd they will not be able to restore them. To restore those that managed to save, celebrate their checkmarks and press the button "Restore" In the lower right corner of the window.

The recovery wizard will propose to specify the folder in which you want to place the recovered files. Specify him folder and click "OK". Now, if you open this folder in the "Explorer", then you can find recovered files.

Advanced file recovery mode

Let's see what is hiding behind the button "Go to advanced mode":

Here we see a list of recovered files in the form of a table. In this window you can see the contents of each file (tab "View"), Parameters (tab "Summary") And the title.

From here you can run a new recovery session by specifying the same parameters that the master requested.

Settings Recuva.

Now click the button "Settings" And let's see what you can configure here. It makes no sense to describe them, the pictures speak for themselves.

The search and recovery process of files is very simple, as well, the program interface itself. Search results remote files You can sort by type (graphics, music, documents, video, archives) and immediately view the contents.



If you want to restore a lot of files and at the same time save the folder structure, then you need to mark this option in the settings.

To restore, choose the checkboxes we need and click on the button "Restore"

In addition to recovery, Recuva can and fully erase files so that they cannot be restored by such programs. To do this, select the method of rubbing the magnetic surface of the disk on which to be a loose file (s).

After selecting the method, you need to mark the deleted files and select the appropriate item in context menu (right button Mouses).

The program is actually quite simple and intuitive, you should not have complications.


Sometimes they ask the question why the program could not restore something from lost files? The fact is that on hard disks Always something erased and something is written, some temporary files, some background Internet downloads, etc. AND, since usually files on disk are stored not in order, but in small fragments, the smaller the free space on the disk and the more time it passes from the moment of removal, the greater the likelihood that the necessary fragments will be seerred with new ones. And the loss of any piece of file is usually equivalent to the loss of the entire file. Therefore, the little files also have much more chances to remain integer than that of large.

Do not install this program On that disc from which you want to restore the deleted files, it can sign up on top of the remote panels.