Make a virtual disk from the folder. How to connect a network drive. Connect "Yandex.Disk" as a network folder

Network disk is a logical disk (folder) created to share files by PC users. Disc can be on a PC server or network device storage of data using in one local network.

Network disk is often created in enterprises and in educational institutions that store documents on servers, providing more storage space and reserve copy files. However, with an increase in the amount of data, the disk becomes relevant in the home network.

To connect the network folder, you must translate all PC connected to it into a common workgroup.

Step 1. Press the combination of Win + R keys. Print in the sysdm.cpl menu and click "OK".

Step 2. Click the Computer Name tab and click Edit.

Step 3. Print name in "is a member" " working Group»English letters. "Computer name" can be selected any or left for the same. Press "OK".

Step 4. Reboot PC to change the changes to take effect.

Step 5. To do Steps 1-4 On all computers located in shared networkBy specifying for them one name of the working group.

Adjust access to folder

Before connecting, you must create a folder on the selected device located in a common network by calling it by English letters.

Step 1. Click on the created network folder by selecting "Properties".

Step 2. Click on the "Access" label and click "Sharing".

Step 3. In the drop-down list, select "All" and click "Add".

Step 5. Press "ready."

Sharing folder will be open.

Disable network credential entry

When connecting to the network, it is often necessary to disable the request to enter network credentials in Windows 7, 8 and 10 (it is not required for XP to perform this setting). To disable the query, you need to change the access settings to the PC.

Step 1. Click on the network icon in notifications (at the bottom of the screen on the right) and select the "Control Center ...".

Step 2. Click "Change Sharing ...".

Step 3. Check in all profiles (opening drop-down), whether points are displayed on the network and access.

Step 4. By srolling the mouse wheel down the list of permissions, select "Disable password protection". Click "Save Changes".

Reference!To connect to a network folder, you may also need to be disabled, and then turn on the Windows firewall again.

Connecting a network disk

Step 1. Open the computer folder double-click Mice.

Step 2. Press "Service" - "Connect a network drive" ( in Windows XP.).

Press the "Connect ..." button at the top of the window ( in Windows 7.).

Press the "Connect ..." button on the disk image on the ribbon interface ( in windows 8 and 10).

Step 3. Select the folder letter and print a path consisting of two slash " \\ ", PC name with slash" \ "And the name of the folder itself (with the lower underscore instead of a space, as shown in the" example "in the screenshot).

Note!To connect instead of a PC name, you can notice it, for example: \\ 192.168.1.100Ind_pads.

Step 4. If the path to the folder is unknown, you can click "Overview ...", open with the mouse of the Tree network by clicking on the desired folder and clicking OK. If a permanent connection to the folder is required, to set the "Restore Connection ..." check box.

If other credentials are required to connect, check the "Use other data" checkbox. Password and login will be requested after pressing "ready."

Press "ready." The disk will be connected.

In the domain environment, it is probably not necessary to connect to other accounts, because Current domain login, most likely, has access to the server.

For example, if available file server NAS, and you will need to connect its folder as a network, you will probably need to enter the credentials installed on the NAS, since the accounting windows data Will not work.

Disk connection via the command line

Step 1. Press Win + R. Print the CMD command and click OK.

Connect "Yandex.Disk" as a network folder

When installing on the PC "" it organizes a folder on it to store copies of files transmitted to the server. It is pretty uncomfortable if the reserved files are too large and occupy a lot of space on the PC.

At the same time, Yandex.Disk supports WebDAV, allowing you to connect the service as a regular network folder without saving files to a PC.

Step 1. Select a network disk connection ( see above) And click on the "Connection to Site ..." link.

Step 3. Enter the address: https://webdav.yandex.ru. And click "Next."

Step 4. Select a name for connecting and click "Next".

Step 5. Enter the name and password for connecting to the service.

Important!The article specified in the photo item must only be marked if one account is used for the service!

Step 6. Mark the "Open ..." checkmark, click "Finish."

The Yandex.Disk folder opens.

The "Computer" folder will be accommodated, which can already be used.

Yandex.Disk will be connected as a network folder.

How to connect a computer to wi-fi

To connect the computer to the point access Wi-Fi It will be necessary to purchase Wi-Fi adapter, Or connect an existing adapter to the network.

Step 1. For enable Wi-Fi On the PC, click on the network in notifications (at the bottom right) and select the "Network Management Center ...".

Select the "Network Management Center ..."

Step 2. After enabling the adapter, click on the network and select "Connect" to the required Wi-Fi network.

Step 3. Enter password access point and click "OK".

Wireless connection to Wi-Fi will be installed.

If the disc is loaded by 100% in Windows 10

In Windows 10, sometimes there is an error leading to load hard disk 100%. The performance of the PC is reduced up to its complete "hanging". If a computer running Windows 10 has become strongly "", it is necessary to see what causes this situation.

Step 1. Press Ctrl + SHIFT + ESC. Run "Task Manager". Go click on the Processes tab and see the CPU, memory, disk and network status.

If the disk is loaded by 90-100%, it is necessary to take action that reduces the load on it. The most often high loading HDD is associated with the "loop" system on indexing files conducted to speed up access.

Step 2. Click on the Magnifier icon near the Start button and print in the CMD string. Click on the "Command Line" utility and select "Run from the administrator".

Step 3. Print in the command that appears, the command: NET STOP "Windows SEARCH"By pressing ENTER.

Step 4. Perform Step 1 This section and see whether the load on the HDD decreased. If the load has not decreased, disable the index service completely.

Step 5. Press Win + R, in the running window to type Services.msc and press ENTER.

Step 6. Click on windows service Search by selecting "Properties".

Step 7. Click "Stop", then select "Disabled". Click "Apply" and "OK".

Step 8. Perform Step 2. of this subparagraph and in the dialing window running the following commands to disable the service windows diagnosticsBy clicking after each ENTER command.

Step 9. Without closing the previous window, dial the following command that disabling the Superfetch service that improves the start of frequently used applications by pressing ENTER. In practice, the Superfetch service is often the cause of high load on HDD: net.exe Stop Superfetch.

Step 10. Without closing the previous window, dial the following command that disables the automatic service. windows updatesBy pressing ENTER: net Stop Wuauserv.

Also enter the following command by clicking Enter: sC Config Wuauserv Start \u003d Disabled.

Step 11. Without closing the previous window, dial the command that turns off the paging file if the main disk in the system is solid-state disk SSD by pressing ENTER. File paging by sSD disk Sometimes loads HDD 100%: wMIC pageFileset WHERE NAME \u003d »C: \\ pagefile.sys» Delete (Where: name \u003d "C: \\ pagefile.sys" - location of the file)

Step 12. Without closing the previous window, dial the next check command and correct errors to HDD by pressing ENTER. To complete the HDD check, the computer will need to restart: cHKDSK / F / R

Step 13. After windows reboots Perform Step 1 this section and see whether the load has decreased on hDD.

Disable the specified services in most cases allows you to get rid of high HDD boot.

Video - How to add a network drive in Windows 7,8,10

To get to any folder, we have a lot to stick in the conductor, if, of course, you did not bring the folder shortcut on Desktop. Label on the desktop is, of course, good. But also to score the desktop with shortcuts is also not beautiful, especially since the more empty desktop is not bad. And someone may not like labels at all. In this case, to facilitate access to local folder, You can turn the folder into a virtual logic disk. In other words, your desired folder will be in the window My computer together with others local disks. And then you will have to do just two clicks to get to the desired folder. Our article is fully dedicated to how to create virtual disk From any folder on your computer.

Create a virtual disk

Before creating a new virtual disk (do not be confused with), we need to get a free letter that is not used by other discs. To do this, open the window My computer and using their knowledge of the English alphabet Select a letter that is not used on this moment. Suppose it is the letter Y.. After that you need to open the command window windows strings and run to execute the following command:

subst Y: C: \\ Dir \\ Seconddir \\

The only thing you need to adjust to your needs is the folder path that we turn into a virtual logical disk. After executing this command you can check the number of logical disks in the window My computer. I am sure they added them there. So you can create a virtual disk from the folder.

The back of the virtual disk medal

The reverse side of the medal is that the created virtual logical disk exists exactly as much as you do not turn off your computer. After rebooting, this logical disk will disappear. Therefore, the execution of the given command should occur at each download. To implement it, you can create .bat.-File based on the above code. Creating such a BAT file was considered in detail in the article, I propose to get acquainted. After that, created .bat.-File must be copied to the folder that is located at

C: \\ Users \\ Username \\ APPDATA \\ Roaming \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup

If you do everything right, then with each new download The operating system will execute this command, the result of which we have already considered.

In addition to the above method, which will always work, I can offer another way that may not work in the case of network folders. In this case, that the created virtual disk from the folder appears in its place. If you download the computer, you must open the registry editor (use commands quickly launch) and go to the section

HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ SESSION MANAGER \\ DOS DEVICES

In this node, you must create a string (String value) parameter and set the name in the form of the letter of the virtual disk. For our example, it will be necessary to specify the name Y:

for the created parameter. The value of this parameter should be the following type:

\\ ?? \\ C: \\ Dir \\ Seconddir \\

Here are such simple actions you can create a virtual disk from the folder on the computer.

Hello.

Own typical situation: there are several computers combined into a local network. It is required to make sharing to some folders so that all users from this local network can work with them.

To do this, you need:

1. "Share" (make sharing) the desired folder on the required computer;

2. On computers on the local area, it is advisable to connect this folder as a network drive (so as not to look for it every time in a "network environment").

Actually, how to do it and will be told in this article (information is relevant for Windows 7, 8, 8.1, 10).

1) Opening general access to the folder on the local network (decaying the folder)

To make sharing folder, you must first configure Windows accordingly. To do this go to the panel windows management At the following address: "Control Panel \\ Network and Internet \\ Network Management Center and Common Access" (see Fig. 1).

Then open the "Change Advanced Sharing Options" tab.

Fig. 1. Network and Shared Access Management Center

1. private (current profile);
2. all networks;
3. guest or publicly available.

You need to reveal each tab alternately and set the parameters as in Fig.: 2, 3, 4 (see below, pictures "Clicable").

Fig. 2. Private (current profile).

Fig. 4. Guest or publicly available

Now it only remains to allow access to the desired folders. It is done very simple:

1. Find the desired folder on the disk, click right-click Mouses on it and go to its properties (see Fig. 5);
2. Next, open the "Access" tab and click the "Share Access" button (as in Fig. 5);
3. Then add the user "Guest" and give it rights: either only read, or read and write (see Fig. 6).

Fig. 5. Opening a general access to the folder (many call this procedure is simple - "decaying")

Fig. 6. Shared files

By the way, to find out which folders are already shared on the computer, it is enough to open the conductor, then in the tab "Network" click on your computer: Next, you must see everything that is open to shared access (see Fig. 7).

Fig. 7. Open folders for shared access (Windows 8)

2. How to connect a network drive in Windows

In order not to climb each time the network environment, do not open tabs once again - you can add any folder in the network as a disk in Windows. This will allow you to slightly increase the speed of work (especially if you often use a network folder), as well as simplify the use of such a folder to novice users of PC.

And so to connect a network drive - right-click on the "My Computer (or This Computer" icon "and select the" Connect Network Disk "function in the pop-up menu (see Fig. 8. In Windows 7, this is similar, only icon "My computer" will be on the desktop).

Fig. 9. Windows 8 - This computer

After that you need to choose:

1. the letter of the disk (any free letter);
2. specify the folder to make a network disk (click the "Overview" button, see Fig. 10).

Fig. 10. Connecting a network drive

In fig. 11 shows the choice of folder. By the way, after the selection you will only stay 2 times "OK" - and you can start working with a disc!

Fig. 11. Field Review

If everything has done correctly - then in "My computer (in this computer)" a network disk with your chosen name appears. You can use almost the same way as if it was your hard disk (see Fig. 12).

The only condition: the computer must be turned on, on the disk which is a shared folder. Well, naturally, a local network should work ...

Fig. 12. This computer is connected).

Very often ask questions what to do if you cannot solve the folder - Windows writes that access is not possible, you need a password ... In this case, most often, we simply did not configure the network accordingly (the first part of this article). After turning off the password protection - problems, as a rule, does not occur.

The "Disk Connection" expression is usually used to describe a special reception of control of discs frequently used in large organizations.

general information

The connected disk is a partition that is mapped to an empty folder of another partition formatted under the file nTFS system. Connected disks are usually assigned a label or name, not the letter. Connected discs are used to organize joint access of a large number of users to sections or disks. The connected disk is also called connected folder.

Connected discs allow you to expand the capacity of the disk or partition. For example, the user saves financial documentation to the Finance folder on a C disk on which there is almost no place to be. The location is on the E platform E. To use the disk on the E disk, create an empty "Documents" folder in the Finance folder and connect the E disc to the new folder. After that, the files stored in the C: \\ finance folder \\ documents will use the space on the disk E. Connecting disks allows you to unlike shortcuts, move the connected discs without updating the folder to which the disk is connected.

Disk connection

1. Open .
2. In the left pane in the section Storage devices Click Disc management.
3. Right-click the disc you want to connect, and select the command.
4. Press the button AddClick Connect how the empty NTFS folder and enter the path to an empty folder on the NTFS disk or click OverviewTo find the folder. Press the button OK; Then press the button OK again.

Remove the connected disk

1. Open Control Panel - Administration - Computer Management.
2. In the left pane in the section Storage devices Click Disc management.
3. Right-click the Deleted Disc icon and select the command Change the letter of the disk and the path to the disk.
4. Press the button Delete, then button Yes.

Note.
The basket does not recognize the connected drives, so an attempt to delete the file stored on the connected disk can cause an error. To finally delete the file from the computer without sending it to the basket, click the file and click the SHIFT + DELETE key combination. With the final deletion of the file, it cannot be restored if not available backup file.

Instruction

Mount an arbitrary folder as a virtual disk in operating systems windows family. Run the CMD command processor. To do this, display the "Running Programs" dialog by selecting the "Run" item in the Start menu, enter the CMD to the "Open" text box and click OK.

Use the Subst command to mount the folder. Enter in the console:

subst /?
Press ENTER and read brief reference on the work of the team. Mount the folder by performing the type command:
subst.<Буква целевого диска>: <Путь к папке>
For example, in order to create a virtual disk x with the contents of the D: \\ temp folder, you must execute the command:
subst X: D: \\ Temp

In Windows, you mounted the remote network resource folder as a disk. Open the My Computer folder window. To do this, use the appropriate label on the desktop. You can also run the Windows Explorer by entering Explorer in the "Start of Programs" dialog and clicking OK, and then selecting the appropriate section in the right pane.

Display the network resource mount dialog. Expand the "Service" section of the main menu and click on the "Connect Network Disk" item.

Mount. In the drop-down list "Disc:", select the item containing the preferred letter of the disc created. In the folder field manually enter the path to or click on the "Overview" button and select it. Check the Checkbox "Restore when logging in" if the resource is supposed to use for a long time. Click the "Finish" button. If necessary, enter the credentials for accessing the remote folder and click the OK button of the displayed dialog.

Mount the arbitrary folder as a directory with another name in the Linux family operating systems. Use the MOUNT command to --Bind (or -B). Run the terminal emulator or switch to the text console. Command the type:

mount --bind.<путь-1> <путь-2>
As parameters<путь-1> and<путь-2> You should specify full or relative paths up to two existing directories. For example:
mOUNT --BIND / Home / Develop / MNT / TEST
After executing this command in the / MNT / TEST directory, the contents of the / Home / Develop folder will be displayed.

Matching the remote network folder to the local directory in the Linux family. Use the Mount command with the -T key to indicate the type file System. For example, to mount a remote TEMP folder on a Windows machine with an IP address of 10.20.30.40 to a local directory / MNT / TEST, you can execute the command:

mount -t SMBFS //10.20.30.40/temp / MNT / Test
The password for access to the resource will be requested. If you need to specify credentials in command lineThis can be done using the additional UserName and Password parameters specified after the key -O. Similar method (using CurlfTPFS) can be mounted FTP folders.