Delete wifi password. How to go to the router settings if you forgot your password? Remove the Wi-Fi password by opening it on Netgear router

It would seem that all users, on the contrary, try to put a password on their wireless network, and as difficult as possible. With such statistics, it is not clear why remove the password with your wireless Network I. do wi-fi network open. Nevertheless, the reasons are abound.

We list possible reasons:

You wish to temporarily remove the password and make your network open. It is useful when we are waiting for a lot of guests, and do not want to darken the holiday input password
You wish to remove the factory password as unnecessary. For example, live in a private house, and no one Wi-Fi is word
You use old laptops, phone numbers, tablets, etc., which do not want to connect with a wireless network with a password
You want to organize free access On the Internet via Wi-Fi for their visitors (customers, employees)

Before remove the password Wi-Fi network And make it open, we understand that you give yourself a report that you can use your Internet anyone who gets into the coverage area of \u200b\u200byour Wi-Fi transmitter (Wi-Fi router, access points). It can how to cause an increased load on your Wi-Fi, which will manifest as a drop in the velocity of the Internet. Also an open network favorable environment for transmitting viruses between network clients, not to mention unwanted access to your "publicly available files and folders", if such, of course, are available.

The risks listed above can be partially leveled, partially avoiding them.

How to remove the main risks knitted with the open Wi-Fi network?

Use guest network

Some routers contain the ability to create a guest network. This is the perfect option.

The guest network is a wireless local network separated from your main Wi-Fi network, naturally, with the possibility of exiting client devices to the Internet. This leads to the fact that devices of different wireless networks "do not see" each other, which complicates the transfer of viruses between them.

Guest network settings You can set the maximum number of connected devices, limit the speed or set the speed priority for the guest network client devices.

Of course, not all Wi-Fi routers and access points fully implement such a functionality. However, it is worth checking, maybe your router is endowed with such capabilities.

If the guest network is not available

I repeat, not all wireless routers And access points support guest network. In this case, first of all you should pass the entrance to the router settings so that no one except you can change them. Secondly, make sure that the shared access to your files on the computer is disabled. I think you will be unpleasant if someone gets access to files and folders, without your consent.

When using old computers that work incorrectly with wireless networks with password and reluctance to share the Internet, the router can be allowed only with the device whose MAC address is registered in the router. This is done in the settings of the router, but is not part of the topic of the article.

How to enter the Wi-Fi router settings

Connect your computer with a router via LAN connector. If the settings are carried out using wireless network Check out "". Turn on the power supply. Wait for the full download of the router (it may take a few minutes). Open your internet browser and enter the address 192.168.0.1 or 192.168.1.1 in the address bar in the address bar, or 192.168.2.1, the address is written on the opposite side of the router. Perhaps you will be a useful article "". In the browser "pop up" window and ask you to enter a login (username) and password, you will find everything on the same back side Router. By default, most Wi-Fi routers use login: admin, password: admin, or login: admin, password: "leave empty".

Consider how to remove wi-Fi password Networks and make it open on the example of Wi-Fi routers:

How to remove the Wi-Fi password on the ASUS router by making it open

By opening the ASUS router settings page, click on the left "Wireless Network" (Wireless). On the updated page, find the authentication method "Authentication Method) and select" Open System "in the Open System list.

At the bottom of the page, click the Apply button.
It is also desirable to change the network name (SSID), otherwise the computer will try to associate the name Wi-Fi with a former password, and it can cause problems. For ASUS, it's easier simple, take a look at the pictures. If you really need to remove the password, but leave the network name to the same, then the link to how to do it higher in the article.
That's so simple.

How to remove the Wi-Fi network password on the TP-LINK router and make it open

How to open the web page of the router settings we looked higher. On the left, select "Wireless Network" (Wireless), in the list that opens, select Safety (Wireless Security). On the updated page, place the "Tick" opposite "Disable Security".

To save the changes, click "Save" (Save). It is also desirable to change the network name (SSID). Above in the article links to the instructions, how to do it, and on the instruction, what to do if you need to leave the name of the network in the same way.

Remove the Wi-Fi password by opening it on Netgear router

What do we need to do to open the network in NetGear? In principle, nothing complicated.
Click on the left "Wireless Settings" (Wireless Settings), and on the Updated page
In the "Security Options" section, select "Disable" (Disable).

To apply the settings, click the "Apply" button.
It is advisable to change the network name (SSID). For NetGear, it is very easy. Just take a look at the picture above and you will understand everything. If you critically leave the SSID (Network Name) without a change, see above the link to the instruction.

How to remove the password of the wireless network on a Wi-Fi router and make it open

D-LINK router web interfaces may differ not only visually, but also have a different location of settings. Therefore, we consider several options separately. Names are selected intuitive, do not bind to them.
Also, after removing the password, it is advisable to change the network name (SSID). For D-Link make it very easy. Link to the nusstructions above the article.

Orange VEB-Interface D-Link

On the left, select "Wireless Settings", "Manual Settings" (manually configured), on the updated page to find "Security Mode", and select "NONE" in the drop-down list (no).

Gray web interface D-Link

At the bottom of this page of the settings you will find the link "Advanced Settings" (Advanced Settings), click it. On the updated page to the right, you will find the Wi-Fi section where you should click "Security Settings". Security settings should be selected in the "Open" list in the drop-down list.

Then apply the "Apply" settings (apply).

White Web Interface (Air-Interface) D-Link

On the left you press the Wi-Fi section where you should select "Security Settings". Security settings should be selected in the "Open" list in the drop-down list.

Then apply the "Apply" settings (apply).

Make an open wireless network on a Wi-Fi router ZyXEL

Zyxel Web interfaces may also differ visually. We will give the named web interfaces, although their official names are unknown to us.
Even after the password is canceled, it is desirable to change the network name (SSID). For ZyXEL make it very easy. Link to the nusstructions above the article.

Classic zyxel interface

In the page that opens, click "Wi-Fi" (Wireless), in the list that opens, click "Security". On the updated page to find the inscription "Authentication" and select "Do not use" in the drop-down list (DON "T Use).

Then apply the "Apply" settings.

Modern zyxel interface

In the page that opens, click the Wi-Fi icon, in the window that opens, remove the "Tick" opposite the inscription "Use Connection Protection" (USE Connection Security). Save the settings.

Then apply the "Apply" settings.

How to Wi-Fi Router Linksys Remove the Wireless Password

For Linksys routers, remove the wireless network password is particularly easy. At the top of the settings page, select "Wireless Network" (Wireless), in the list that opens, select Safety (Wireless Security). On the updated page in the drop-down list, select "Disabled" (Disabled).

To save the changes, click the Save Settings button. It is advisable to change the network name (SSID), otherwise you need to remove the parameters of the wireless network (link to the instruction as it is placed above the text).

How to remove the Wi-Fi password on a Wi-Fi router

Netis is a respected firm flooding CIS countries inexpensive, but quite decent routers. Remove the password with a wireless network here is not more difficult than in routers of firms discussed above.
On the left, select "Wireless Network" (Wireless), in the list that opens, select "Wi-Fi Settings" (Wireless Settings). On the updated page near the inscription "Authentication Type" (Authentication Type) in the drop-down list, select "No" (None).

That's all. If you were interested in an article, write about it in the comments or share it in social networks. Good luck and good mood.

Network protection: Need or not needed? Typically, the owners are harder to protect their own Wi-Fi network as reliable. To do this, they set a password not only to connect to the network, but also access to the router settings, and also activate the filtering of MAC addresses. This approach fully justifies itself if you need to protect your wireless network from outsiders.

Possible consequences.

IN publicly available network, any connected person will be able to change the settings. It is unsafe, so access to the settings of the router should be only from a personal computer and is protected by a reliable password.

If you still need to make your wireless network defenseless, try to take into account several nuances.

All people entering the open network distribution zone will be able to connect to it and freely exploit your Internet. This means that the router will have a load several times higher. If it is low-power, it will periodically "hang." Consequently, the equipment should be really good.

In a public network, any connected person will be able to. It is unsafe, so access to the settings of the router should be only from a personal computer and is protected by a reliable password.

In the "Network Management Center and common access»Change the status of your network with" home "to" public ", in order to avoid access to foreign data and files on your computer.

The speed of Internet traffic will become several times lower, depending on the number of network connected to the network. Wi-Fi devices. With their excessive amounts, the connection may sometimes disappear.

Now you can proceed to setting up the Wi-Fi network, make it open.

How to disable protection.

In the TP-LINK router.

To change the router settings, you need to connect the router to the computer with a network cable (highly recommended), but it is possible for Wi-Fi. Read the sticker with different information on your router, and find the IP address (for example: or). There is also a login (most often ADMIN) and a password (most likely an ADMIN), they open access to the settings. Run the internet browser, preferably "Opera" or " Mozilla Firefox."But you can and" Internet Explorer." Enter the IP address to the address string and click the Go button. In the window that appears, enter the password and login (from the sticker on the router). Click the "Submit" button after entering the data in this window (if you used to change the password or login, then you need to reset and return the "Default" settings). The router settings window opens.

In the list of transitions list on the left side of the window, select Wireless SECURITY. IN russian-language version, it is "wireless mode" "Protection wireless mode" Press the "Disable Security" button, an inclusion label appears inside the button. In the Russian version "Disable protection". After that, save the changes by clicking the "Save" button. Now your network has a completely disabled protection, and it can be connected to it without a password.

In ASUS router.

Go to the above method, to the main settings window. In the "Authentication method drop-down list, select Open System and click on the Apply button. The result is the same as in the previous description.

In the D-link router. The settings go through the same way. Open the "Wi-Fi" tab. Next, the "Security Settings" tab. Then in the "Network Authentication" drop-down list, select "Open". Press the "Apply" button. All, settings are completed.

General principles.

If you are using the router of another version, look in the settings of the wireless network similar in the meaning of the items. The main thing is that they mean disabling Wi-Fi network protection. Or open access to the network for all.

Conclusion.

To protect the wireless network again, return the initial values \u200b\u200bin the previously changed settings.

Hey! When in some instructions I write that you need to go to the router settings, I try to describe in detail the process itself, how to enter the control panel to perform any settings there. In most cases, it does not cause any difficulties. But it often happens that we just forgot your password, and many questions appear, as in this case, get into the settings.

The question itself is on the entrance to the router settings if you forgot the password is not very clear. Because the router has at least two passwords. And it is not clear which one you forgot, and what is the problem specifically in your case.

Password that is used to connect to your Wi-Fi network.
And the password to be specified to enter the router settings. Most often, this password is changed, and successfully forget it. Understandable thing that we will not specify right password, in the settings of the router we will not fall. Well, the factory password does not fit (which is usually admin)Since we changed it.

Here with such problems can be encountered during the entry in the router control panel. Now we will look at the decision on the basis of your case, consider both options.

Immediately I give a link to the instructions for solving a wide variety of problems with which you may encounter when entering the settings of your router: there are also links to detailed instructions For certain router manufacturers: TP-Link, ASUS, D-LINK, etc.

If you forgot the password from Wi-Fi and you can not go to the settings of the router

This is the first option in which we do not remember the password from our Wi-Fi network. And maybe we cannot connect to it. And in the router settings, we need to go to what to see, or change the password.

In this case, everything is very simple:

First, we have a very detailed instruction on. You can see the password on the computer (if it is), just remember it. Connect to the wireless network and go to the control panel.
Secondly, you can go to the settings of the router from that device that in this moment Already connected to your Wi-Fi. And already in the router settings to see forgot password, or change it.
Thirdly, connect to the router over the network cable, and go into the control panel. In this case, the password from Wi-Fi will not need us at all. If you do not know how to connect to the router on the cable, then detailed.

With this problem, I think figured out.

If you forgot your password from entering the router settings

This happens most often. The control panel of each router is password protected. There you need to specify the username and password. It is necessary to protect the settings that everyone who connects to your network could not have access to them.

If the router is new, not yet configured, then used standard password and username. In most cases, it is Admin and Admin. Or there is no protection at all. We set this password or change the router in the process. I always advise you to do it in my instructions. And even there is a separate one.

So, we changed this password, set up a router, and forgot it. And then we urgently needed to go to the settings, and we do not remember the password. On the authorization page, specify some name and password, but nothing happens, the page is simply rebooted, or we receive a message that the password is incorrect.

That's all, not to get into the settings. If it fails to remember this data, and perhaps not you changed the password, you will have to reset the router settings. After that, we will go to the control panel by factory settings, which are shown from the bottom of the router, on the sticker.

What would make reset settingsYou need to press the button for about 10 seconds, which is usually signed as: reset, WPS / RESET, SROS, DEFAULT. It all depends on the model of your router. The button can be recessed into the housing, and you need to push it with something sharp. The router must be included. This button looks like this:

After returning to the factory settings, to enter the control panel, use the data specified on the router itself. If the factory data is not specified there, it means that the password is not default.

If you have difficulty resetting settings, then our site has detailed instructions for most manufacturers. If you do not find, write in the comments, give a link.

If something failed, write, let's try to solve your problem.

The network access key or the network administrator page is not lost. It is possible to restore them. This should help you in solving this problem.

Standard passwords for routers

Each Wi-Fi router functions based on data access to the Internet and local networkwhich are login and password. They are created at the very beginning of use in the first stages of setting up network equipment. The login always performs the same word on the Latin "Admin", and the password can be both the word "admin" and the number 1234, 123, 0000.

Also, the password may be absent at all. And for the operator, Kyivstar is possible such a login.

In any case, not to experience good luck and do not waste time in vain on the random selection, it is necessary to look into the passport of the router, which is included and may look like a brochure. If the router got to the user as a used / y-product and the supasport is not available, you should ask your friends, acquaintances or relatives who use the network device produced by the same manufacturer, because Login and password will be similar.

Factory settings

At the initial stage of configuration after entering standard identification data, the user will be asked for the ability to change the login and password to make the entry into the domain of foreign users. Those. On the computer screen, the interface will highlight all the necessary data, as well as prompts on the formation of the "access key", which includes a login and password.

After passing this stage, the user will be asked to create a local network with automatic connection To the Internet for the convenience of work in the future. It is not necessary to confuse the login and password to access the local network operating on the base of the router and the Internet network, because These are two different things.

I forgot the password from the router what to do

What if I forgot the password from the router, is an ordinary question of many users who have forgotten or lost their data. How to be in this situation? Restore the key is easy. It all depends on whether the password and login of which network was lost. If it's on the local network, i.e. In your router, there are no 2.Serous difficulties here to restore it.

Video: Reset Password TP-LINK Routers Interface

If the user has forgotten the password of Wai Fi Router, he needs to act as follows:

How to restore password for the router and login if they are needed to enter the Internet?

In case of loss of data to use resources world Wide Web The following procedure is required:

Thus, the user has the opportunity to independently correct the situation without help from the side.

Restoration of the administrator domain

In addition to those users who have lost access data to the local network and the Internet, there are those that manage to lose access to the admin page ( homepage router). In this case, there is no chance to restore lost information and change the settings of the network device. The forums often appear the question of type: "I forgot the login and password from the admin. What do i do?". Easier to reset the settings in network device And re-create a new local network.

To reset the router parameters just click and withstand in this position a few seconds button on the rear panel.

At the same time, the lights on the front panel of the device will go out for a while, and then earn again. The button itself is located in a small hole to prevent accidental reset, and you can only press it using an additional fixture that match, needle, pin, etc. can perform.

Recovery methods

There will be no benefit from the router settings if the user loses the access keys to the administrator page, the router, local network and the Internet. At the same time, each of the access keys will be recovered differently. The main methods are hardware and software.

The hardware access method is associated with checking the parameters on the router's home page, and the software is based on the use of the software registry and special application applications that scan all information on the computer on the use of the network.

When hardware restoration to the network, at least the presence of a login and password to the administrative page on which all parameters and settings of the local network are formed and connecting to the Internet. To enter the administrator's page, you must dial the IP address of the manufacturer in the Internet browser address line.

The IP address can be found on the sticker located on the bottom of the router.

If there is no tax, then home addresses of routers look like this:

D-Link 192.168.0.1
ZyXEL 192.168.1.1
ASUS 192.168.1.1
Netgear 192.168.1.1
TPLINK 192.168.1.1

After entering the appropriate router address, the user will open an interface with a multitude of settings and network settings. In order to find out the data on the local network, you must enter the Local Network tab. Also, this tab may be called Wi-Fi network or have similar names.

After that, the user must find the WPA key parameter. Opposite him and password access to the router will be located.

Password, access to the router is not all. In addition to the login key to the local network, entry data to the provider domain may also be required. These data are also listed in the settings of the network device.

To do this, after fixing, access data on the local network is required to go to the "Internet" tab, where not only parameters and connection technology will be listed, but also data on the entry to the Internet.

Most often, login and password are located next to the string "Setting account"Or" Connection Setup ".

Recruitment of utility (program)

In addition to the hardware method of eliminating the problem of loss of identification data at the entrance to the Internet and the local network exists and software. It is used by professional users and is not suitable for novice. Thus, the participation of the second user with more high levels Knowledge in this area.

For program method The following work applications are used to help restore the necessary data on login and access passwords:

Dialupass;
REMOTE DESKTOP PASSVIEW;
RouterPassView;
WirelessKeyView;
Wireless Password Recovery.

And this is not the entire list. By themselves, these programs are amateur developments, and not the result of the work of professional teams, therefore the programs of these programs are not always convenient and a newcomer is clear. But if the user still decided on independent actions, then he needs to be prepared for the fact that most references to such work applications may contain malicious software.

Throughout the work of the profile program to search and detect the login and password from the network on the computer, an antivirus should work with the maximum possible set of functions in order to prevent infection personal computer and damage or theft of personal data.

The work of such programs is based on basic principles of functioning operating systemwhich, in turn, records every step of the user in the electronic information space. In this case, a registry is formed, describing all actions committed for lately. They will be stored in the form of encrypted files until all memory is filled with hard disk.

Open these files is impossible without special knowledge and professional skills. None known to many users program will not be able to read them and issue the necessary information to the computer screen. In this case, and need special applicationshelping to disclose encrypted logins and passwords.

After appropriate use, the PC owner will continue to use both local and the Internet network. But at the same time, it is impossible to forget that all the keys to access networks need to be saved at mandatory as in the form of an ordinary file with printed text and in writing so that in the future do not experience significant difficulties in connection.

Video: Installing and configuring Wi-Fi Router

To prevent the data from the loss to access the local network and the Internet, novice users are recommended to conduct the following actions:

during configuration and installation of drivers on network equipment, the program will offer to save a file with backup data on the PC desktop;
after creating access to network data, the file must be copied to removable carrier and make another copy in any other folder;
after copying files, you must manually write on paper all the necessary logins and passwords from the network.

Also, you should not forget that the keys are also available in free access to view from a computer that has been configured by the router. This data can be seen in the network properties. To do this, you need to find the network connection icon on the taskbar on the desktop in the lower right corner.

Then send the cursor to the name home network and press right button. When a new window appears, select the "Properties" option and in the next new window you can already see all the necessary keys.

The use of these tips will reduce the likelihood of the complete loss of the necessary information for the local Internet.

Question answer:

How to watch a password from Wi-Fi in Windows?

To view a password from accessing a wireless local network in Windows, you must:

Is it possible to restore network security key?

The security key for access to the local network is easy to restore. It is enough to go to the admin page and in the settings to find the security key line, where the access password will be specified.

How to find out the login and password if you lost?

In order to learn the login and password for accessing the Internet, the administrator or local network page, you should use specialized programs (Dialupass, Remote Desktop PassView, RouterPassView), which can find the necessary data in the encrypted network history files.

Such information can also be found on the home page of the router, if you are not lost access keys to it.

What if you forgot the password from WiFi (Wi Fi) router?

If the user has forgotten the password from wi-Fi Router It is necessary to use specialized programs for reading encrypted information (Dialupass, Remote Desktop PassView, Router Pass View). But if the programs do not help, you will need to reset the device settings to factory through pressing the button, which is located on the rear panel of the router. Next, you should re-configure network equipment and network itself.

The Wi-Fi home wireless network must be password protected. But there are different cases, you will say. For example, you want to invite friends and arrange a party. In this case, it should be provided that they (your friends) will most likely want to connect to the Internet. And this, accordingly, should not be accompanied by any difficulties. And in order not to mess with passwords, it is better to simply disable the access password to Wi-Fi. Then it can be renovated again.

Or, perhaps, you have any problems with connecting a particular device. And so that they do not particularly bother, not to look for solving problems associated with password and security type, you can temporarily remove the password. Often, such problems arise, for example, when connecting a TV (Smart TV) to a wireless network.

How to remove password with wi-fi

So, first of all, you, of course, you need to open the settings of the router. Next, go to the tab with the security settings of the wireless network.

In case of asus routers, remove the password is easy enough - you just need to go to the " Wireless network"And in the graph of the authentication method, set" Open System».

For the new web interface ASUS:

Then you need to save the settings and restart the router.

If you have tP-LINK router, go to the tab Wireles - Wireless Security and click " DISABLE SECURITY." Confirm the settings and restart the router.

For Russian web interface TP-LINK:

Confirm the settings and restart the router.

For d-Link routers need to open the tab " Setup."Then choose" Wireless settings"And click at the very bottom to the MANUAL WIRELESS Connection Setup button, then a page with the settings of the wireless network will appear, at the bottom you see the item Security Mode. Select from the None list. (For old versions of firmware)

For the new web interface D-Link click on the Wi-Fi tab security Settings"Next in paragraph" network authentication»Select Open.

Apply the settings and restart the router.

Please note if you have decided to disable the password, it is also desirable to change the standard login and password to access the router settings.

You can also change it in the router settings. In case of tP-LINK routers You should open the System Tools tab -\u003e "Password".